Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 2
  3. ›14 Waves, Sound and Physical Optics
  4. ›14.9 Thin-film interference

AP Physics 2 · Unit 14 · Waves, Sound and Physical Optics

14.9 Thin-film interference

Explain how reflections from the two surfaces of a thin film interfere, using path difference and phase change to predict bright and dark reflections.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Soap bubbles show colors because light reflects twice
  1. 1Soap bubbles show colors because light reflects twice
  2. 2The extra trip through the film creates a path difference
  3. 3Reflection can flip a wave by half a cycle
  4. 4Path difference and phase change together set the result
  5. 5Thin films appear in coatings, bubbles and oil layers
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Soap bubbles show colors because light reflects twice

A soap bubble or an oil slick on wet pavement shows swirling colors. Neither one contains colored dye. The colors come from light reflecting off a very thin layer.

A thin film is a transparent layer whose thickness is about the size of a wavelength of visible light. Light reflects from the top surface and again from the bottom surface. The two reflected waves overlap and interfere.

This resembles the double slit. Both patterns come from two overlapping waves that began as one. The difference is that here the two waves come from two reflections.

Key term

thin film

A thin film is a transparent layer, such as soap solution or oil, whose thickness is comparable to the wavelength of visible light.

Part 1 done

2

Part 2 of 5: The extra trip through the film creates a path difference

Now follow the light in detail. Take light that strikes the film almost perpendicular to its surface. One ray reflects from the top surface. Another ray enters the film, reflects from the bottom surface, and comes back out.

Figure 1. Ray 2 travels an extra distance of about 2t2t2t inside the film compared with ray 1.

The second ray travels down and back, so it covers an extra distance of about 2t2t2t. Here ttt is the thickness of the film. This extra distance is the path difference between the two rays.

Inside the film, light slows down and its wavelength shrinks. The wavelength in the film is λfilm=λn\lambda_\mathrm{film}=\frac{\lambda}{n}λfilm​=nλ​. Here λ\lambdaλ is the wavelength in air and nnn is the film’s index of refraction.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify what produces the colors seen in a soap bubble.
Show answer and explanation

Answer: B · Worked explanation

A soap film is a thin film. Light reflects from its front and back surfaces, and the two reflected waves interfere. Which wavelengths reinforce depends on the thickness, so colors appear. Soap solution contains no dye, so absorption by dye is the tempting but incorrect idea.
3

Part 3 of 5: Reflection can flip a wave by half a cycle

The path difference is only half the story. Picture a rope pulse reflecting from a fixed end. It comes back upside down. Light can do something similar.

When light reflects at a boundary with a medium of higher index of refraction, the reflected wave is inverted. This inversion is a phase change of half a cycle, equal to half a wavelength. Reflection at a boundary with a lower index gives no phase change.

Reflection at a boundary depends on the index of refraction beyond it.

Light reflects from a medium withReflected wave
Higher index of refractionInverted: half-cycle phase change
Lower index of refractionNot inverted: no phase change
Light reflects from a medium with
Higher index of refraction
Reflected wave
Inverted: half-cycle phase change
Light reflects from a medium with
Lower index of refraction
Reflected wave
Not inverted: no phase change

Light that passes through a boundary is never inverted. Only reflections matter here.

Key term

phase change

A phase change is a half-cycle shift that a reflected wave undergoes at a boundary with a medium of higher index of refraction.

Part 3 done

4

Part 4 of 5: Path difference and phase change together set the result

Now combine the two effects. First count how many of the two reflections are inverted. Then compare 2t2t2t with the wavelength in the film. Use m=0,1,2,…m=0, 1, 2,\dotsm=0,1,2,… in the conditions below.

Conditions for bright and dark reflection at near-perpendicular incidence.

Inverted reflectionsBright reflectionDark reflection
Exactly one2t=(m+12)λfilm2t=\left(m+\frac{1}{2}\right)\lambda_\mathrm{film}2t=(m+21​)λfilm​2t=mλfilm2t=m\lambda_\mathrm{film}2t=mλfilm​
Both or neither2t=mλfilm2t=m\lambda_\mathrm{film}2t=mλfilm​2t=(m+12)λfilm2t=\left(m+\frac{1}{2}\right)\lambda_\mathrm{film}2t=(m+21​)λfilm​
Inverted reflections
Exactly one
Bright reflection
2t=(m+12)λfilm2t=\left(m+\frac{1}{2}\right)\lambda_\mathrm{film}2t=(m+21​)λfilm​
Dark reflection
2t=mλfilm2t=m\lambda_\mathrm{film}2t=mλfilm​
Inverted reflections
Both or neither
Bright reflection
2t=mλfilm2t=m\lambda_\mathrm{film}2t=mλfilm​
Dark reflection
2t=(m+12)λfilm2t=\left(m+\frac{1}{2}\right)\lambda_\mathrm{film}2t=(m+21​)λfilm​

A soap film in air has exactly one inverted reflection, from its top surface. An antireflective coating on glass usually has both inverted, because each boundary leads to a higher index. Check the indices at both surfaces before choosing a row.

Common mistake

Do not put the wavelength in air into these conditions. The path 2t2t2t lies inside the film, so use λfilm=λn\lambda_\mathrm{film}=\frac{\lambda}{n}λfilm​=nλ​.

Worked example

Brightest thin soap film

A soap film in air has index of refraction 1.33. Find its smallest thickness that strongly reflects light of wavelength 560 nm.
  1. 1
    Air to film inverts the top reflection. Film to air does not invert the bottom one. Exactly one inversion occurs.
  2. 2
    For bright reflection with one inversion, 2t=12λfilm2t=\frac{1}{2}\lambda_\mathrm{film}2t=21​λfilm​ at the smallest thickness.
  3. 3
    Wavelength in the film: λfilm=λn=560 nm1.33=421 nm\lambda_\mathrm{film}=\frac{\lambda}{n}=\frac{560\,\mathrm{nm}}{1.33}=421\,\mathrm{nm}λfilm​=nλ​=1.33560nm​=421nm.
  4. 4
    Thickness: t=λfilm4=421 nm4≈105 nmt=\frac{\lambda_\mathrm{film}}{4}=\frac{421\,\mathrm{nm}}{4}\approx105\,\mathrm{nm}t=4λfilm​​=4421nm​≈105nm.

Answer: The smallest thickness is about 105 nm105\,\mathrm{nm}105nm.

Part 4 done

Quick check

One question on the part you just read

Easy

Light in air reflects from a glass surface, and glass has a higher index of refraction than air. Identify what happens to the reflected wave.
Show answer and explanation

Answer: A · Worked explanation

Reflection at a boundary with a higher index of refraction inverts the wave, a phase change of half a cycle. The reflected wave stays in the same medium and keeps its frequency and wavelength. The idea of no phase change applies to reflection at a boundary with a lower index instead.
5

Part 5 of 5: Thin films appear in coatings, bubbles and oil layers

Where else do these effects show up? Anywhere a thin transparent layer sits on another material. Common examples include these.

  • Soap bubbles and soap films, whose colors change as the film thins.
  • Oil layers on wet pavement, which show bands of color.
  • Antireflective coatings on camera lenses and eyeglasses.

An antireflective coating has an index between that of air and glass. Both reflections are inverted, so the phase changes cancel out. A thickness of λfilm4\frac{\lambda_\mathrm{film}}{4}4λfilm​​ then gives 2t=12λfilm2t=\frac{1}{2}\lambda_\mathrm{film}2t=21​λfilm​, and the two reflections cancel.

White light contains many wavelengths. At a given thickness, some wavelengths cancel on reflection and others reinforce. This is why you see colors, and why thickness changes make them swirl.

Exam tip

A full explanation names two ingredients: the path difference and any phase changes. Then it links them to constructive or destructive interference.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain why a soap film shows colors when lit by white light.

    Show mark schemeHide mark scheme

    Model answer

    Light reflects from both the top and bottom surfaces of the film, and the two reflected waves interfere. The path difference and phase change depend on the thickness and the wavelength. Some wavelengths therefore reinforce while others cancel, so certain colors are seen.

    • 1 mark for stating that reflections from the two surfaces overlap and interfere
    • 1 mark for linking the result to thickness and wavelength through path difference and phase change
    • 1 mark for explaining that some wavelengths reinforce and others cancel, leaving certain colors
  2. 2.Identify[1 mark]

    Identify whether the reflected wave is inverted when light in air reflects from the top surface of a soap film.

    Show mark schemeHide mark scheme

    Model answer

    Yes. The film has a higher index of refraction than air, so the reflected wave is inverted, a half-cycle phase change.

    • 1 mark for stating that the reflected wave is inverted because the film has a higher index of refraction
  3. 3.Describe[2 marks]

    Describe how the path difference arises in a thin film for light that strikes almost perpendicular to the surface, and give its value.

    Show mark schemeHide mark scheme

    Model answer

    One ray reflects from the top surface. The other travels down through the film and back up after reflecting from the bottom surface. The extra distance is about 2t2t2t.

    • 1 mark for explaining that one ray travels through the film and back before leaving
    • 1 mark for giving the path difference as about 2t2t2t
  4. 4.Determine[3 marks]

    Determine the smallest nonzero thickness of a film in air at which light of wavelength 600 nm in air is absent from the reflection. The film has index of refraction 1.50.

    Show mark schemeHide mark scheme

    Model answer

    One reflection is inverted, so dark reflection needs 2t=mλfilm2t=m\lambda_\mathrm{film}2t=mλfilm​. Here λfilm=600 nm1.50=400 nm\lambda_\mathrm{film}=\frac{600\,\mathrm{nm}}{1.50}=400\,\mathrm{nm}λfilm​=1.50600nm​=400nm. Taking m=1m=1m=1 gives t=200 nmt=200\,\mathrm{nm}t=200nm.

    • 1 mark for calculating λfilm=400 nm\lambda_\mathrm{film}=400\,\mathrm{nm}λfilm​=400nm
    • 1 mark for using 2t=mλfilm2t=m\lambda_\mathrm{film}2t=mλfilm​ for dark reflection with one inversion and m=1m=1m=1
    • 1 mark for obtaining t=200 nmt=200\,\mathrm{nm}t=200nm
  5. 5.Explain[3 marks]

    Explain why an antireflective coating with thickness equal to one quarter of the wavelength in the coating reduces reflection. The coating has an index between those of air and glass.

    Show mark schemeHide mark scheme

    Model answer

    Both reflections occur at a boundary with a higher index, so both are inverted and no net phase difference results. The path difference is 2t=12λfilm2t=\frac{1}{2}\lambda_\mathrm{film}2t=21​λfilm​. The two reflected waves therefore cancel.

    • 1 mark for stating that both reflections are inverted, so the phase changes cancel
    • 1 mark for calculating the path difference as 2t=12λfilm2t=\frac{1}{2}\lambda_\mathrm{film}2t=21​λfilm​
    • 1 mark for concluding that the reflected waves cancel

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the situation in which thin-film interference is observed.
Show answer and explanation

Answer: D · Worked explanation

An oil layer on water is a thin transparent layer. Light reflected from its top and bottom surfaces interferes and produces colored bands. Light spreading through a narrow slit is diffraction, which does not involve reflection from two surfaces of a thin layer.
4.

Medium·Calculate[2 marks]

Light of wavelength 532 nm in air enters a film with index of refraction 1.33. Calculate the wavelength of the light in the film.
Show answer and explanation

Answer: C · Worked explanation

The wavelength in the film is λfilm=λn=532 nm1.33=400 nm\lambda_\mathrm{film}=\frac{\lambda}{n}=\frac{532\,\mathrm{nm}}{1.33}=400\,\mathrm{nm}λfilm​=nλ​=1.33532nm​=400nm. The value 708 nm708\,\mathrm{nm}708nm comes from multiplying by nnn instead of dividing, which would make the wavelength longer, but light has a shorter wavelength in a medium with n>1n>1n>1.
5.

Medium·Determine[2 marks]

A soap film in air has a wavelength of 400 nm inside the film for a certain color. Determine the smallest nonzero thickness for which that color is missing from the reflected light.
Show answer and explanation

Answer: A · Worked explanation

Exactly one reflection is inverted, so dark reflection needs 2t=mλfilm2t=m\lambda_\mathrm{film}2t=mλfilm​. With m=1m=1m=1, t=400 nm2=200 nmt=\frac{400\,\mathrm{nm}}{2}=200\,\mathrm{nm}t=2400nm​=200nm. The value 100 nm100\,\mathrm{nm}100nm is the smallest thickness for bright reflection, where 2t=12λfilm2t=\frac{1}{2}\lambda_\mathrm{film}2t=21​λfilm​, so it gives the opposite result. As a check, with m=1m=1m=1 we get 2t=400 nm2t=400\,\mathrm{nm}2t=400nm, which equals one film wavelength, so the waves cancel.
6.

Medium·Determine[2 marks]

Oil with index of refraction 1.45 floats on water with index 1.33, with air above. For near-perpendicular light, determine which reflections are inverted.
Show answer and explanation

Answer: B · Worked explanation

Light going from air to oil moves to a higher index, so that reflection is inverted. Light going from oil to water moves to a lower index, since 1.45>1.331.45>1.331.45>1.33, so that reflection is not inverted. The idea that the oil–water reflection inverts comes from assuming any boundary between two liquids inverts light.
7.

Medium·Predict[2 marks]

A film in air slowly thickens from almost zero to a thickness of λfilm4\frac{\lambda_\mathrm{film}}{4}4λfilm​​ for one color. Predict how the reflected brightness of that color changes.
Show answer and explanation

Answer: D · Worked explanation

Near zero thickness the path difference is almost zero, but only one reflection is inverted, so the waves cancel and the film looks dark. At t=λfilm4t=\frac{\lambda_\mathrm{film}}{4}t=4λfilm​​, 2t=12λfilm2t=\frac{1}{2}\lambda_\mathrm{film}2t=21​λfilm​, and with one inversion the waves add. The film is then bright, not dark.
8.

Hard·Determine[2 marks]

A coating with index of refraction 1.38 lies on glass with index 1.52, with air above. Determine the smallest thickness that cancels reflected light of wavelength 552 nm in air.
Show answer and explanation

Answer: A · Worked explanation

Both reflections are inverted, so cancellation needs 2t=12λfilm2t=\frac{1}{2}\lambda_\mathrm{film}2t=21​λfilm​. Here λfilm=552 nm1.38=400 nm\lambda_\mathrm{film}=\frac{552\,\mathrm{nm}}{1.38}=400\,\mathrm{nm}λfilm​=1.38552nm​=400nm, so t=400 nm4=100 nmt=\frac{400\,\mathrm{nm}}{4}=100\,\mathrm{nm}t=4400nm​=100nm. The value 138 nm138\,\mathrm{nm}138nm comes from dividing the wavelength in air by 4 and ignoring the index of refraction. The value 200 nm200\,\mathrm{nm}200nm would make 2t2t2t equal to a full film wavelength, which gives bright reflection.
9.

Hard·Explain[2 marks]

The top of a vertical soap film in air drains until it is much thinner than a wavelength, and it looks black in reflection. Explain why.
Show answer and explanation

Answer: C · Worked explanation

With almost no thickness, the two reflected waves travel nearly equal distances. Because exactly one is inverted, they are half a cycle apart and cancel. If neither reflection were inverted, the waves would add and the film would look bright, so cancellation would not happen in that case.
10.

Hard·Determine[2 marks]

A film with index of refraction 1.45 and thickness 200 nm lies on glass with index 1.52, with air above. Light of wavelength 580 nm in air strikes it almost perpendicular. Determine the appearance of the reflection.
Show answer and explanation

Answer: A · Worked explanation

Here λfilm=580 nm1.45=400 nm\lambda_\mathrm{film}=\frac{580\,\mathrm{nm}}{1.45}=400\,\mathrm{nm}λfilm​=1.45580nm​=400nm and 2t=400 nm2t=400\,\mathrm{nm}2t=400nm, which equals one film wavelength. Both reflections go to a higher index, so both are inverted. With both inverted, 2t=mλfilm2t=m\lambda_\mathrm{film}2t=mλfilm​ gives bright reflection. Assuming only one inversion would wrongly give dark.

Keep going

Next topic15.1 Quantum theory and wave-particle dualityPrevious topic14.8 Double slits and diffraction gratings

More in Unit 14 · Waves, Sound and Physical Optics

  1. 14.1Wave pulses and wavesNotes · 10 questions
  2. 14.2Periodic wavesNotes · 10 questions
  3. 14.3Boundary behavior and polarizationNotes · 10 questions
  4. 14.4Electromagnetic wavesNotes · 10 questions
  5. 14.5The Doppler effectNotes · 10 questions
  6. 14.6Interference and standing wavesNotes · 10 questions
  7. 14.7DiffractionNotes · 10 questions
  8. 14.8Double slits and diffraction gratingsNotes · 10 questions
  9. 14.9Thin-film interferenceNotes · 10 questions

All AP Physics 2 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Soap bubbles show colors because light reflects twice
  2. 2The extra trip through the film creates a path difference
  3. 3Reflection can flip a wave by half a cycle
  4. 4Path difference and phase change together set the result
  5. 5Thin films appear in coatings, bubbles and oil layers
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe