AQA A-level Chemistry · Section 3.2 · Inorganic chemistry
3.2.1 Periodicity
Describe and explain the trends in atomic radius, ionisation energy, electronegativity, melting point and reactivity across Period 3.
1/5Atomic radius shrinks across Period 3 as nuclear charge rises
- Atomic radius shrinks across Period 3 as nuclear charge rises
- First ionisation energy rises overall but dips twice
- Electronegativity rises across the period and separates metals from non-metals
- Melting points depend on the structure and bonding of each element
- Metals become less reactive and non-metals more reactive across the period
- Check your recall
- Practice: 10 questions
Part 1 of 5: Atomic radius shrinks across Period 3 as nuclear charge rises
A period is a horizontal row of the periodic table. Period 3 runs from sodium to argon, and the outer electrons of each atom are in the third shell.
Across the period, each element has one more proton than the one before. The extra electron enters the same shell. The inner shells stay the same, so the shielding of the outer electrons barely changes.
Nuclear charge therefore rises while shielding stays about constant. The outer electrons are pulled in more strongly. The atomic radius decreases from sodium to chlorine.
Key terms · tap one for its definition
period
A period is a horizontal row of the periodic table.
shielding
Shielding is the repulsion of outer electrons by inner-shell electrons, which reduces the attraction they feel from the nucleus.
atomic radius
The atomic radius is half the distance between the nuclei of two bonded atoms of the same element.
Part 2 of 5: First ionisation energy rises overall but dips twice
Atomic size affects how firmly an atom holds its outer electron. Smaller atoms hold it more tightly, so removing it takes more energy. The first ionisation energy measures this, and it generally rises across Period 3.
For magnesium the process is .
Two dips break the pattern, and each has a clear cause.
- Magnesium to aluminium: aluminium’s outer electron is in a 3p subshell, which is higher in energy than 3s. The 3s electrons also shield it.
- Phosphorus to sulfur: two electrons share one 3p orbital in sulfur. Repulsion between them makes one easier to remove.
Key term
first ionisation energy
The first ionisation energy is the energy needed to remove one electron from each atom in one mole of gaseous atoms, in .

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: B · Worked explanation
Part 3 of 5: Electronegativity rises across the period and separates metals from non-metals
Atoms in a covalent bond also compete for the shared pair of electrons. The winner is the atom with the higher electronegativity. Rising nuclear charge and falling radius make it increase from sodium to chlorine. This follows the trend in atomic radius.
Argon forms no covalent bonds, so it has no electronegativity value. Sodium and the other metals have low values and tend to lose electrons. Chlorine and the other non-metals have high values and tend to gain or share them. Silicon lies between the two and is a semiconductor.
Physical properties of metals and non-metals in Period 3
- Property
- Electrical conductivity
- Metals (Na, Mg, Al)
- Good, because electrons can move through the structure
- Non-metals (P, S, Cl, Ar)
- Poor, because no electrons are free to move
- Property
- When struck
- Metals (Na, Mg, Al)
- Malleable and ductile
- Non-metals (P, S, Cl, Ar)
- Brittle if solid
- Property
- State at 25 °C
- Metals (Na, Mg, Al)
- Solid
- Non-metals (P, S, Cl, Ar)
- Solid (P, S) or gas (Cl, Ar)
Key terms · tap one for its definition
electronegativity
A measure of an atom’s ability to attract the shared electrons in a covalent bond.
metals
Metals are elements that generally conduct electricity and can be shaped without breaking.
non-metals
Non-metals are elements that generally conduct electricity poorly and occupy the upper-right region of the periodic table.
Part 4 of 5: Melting points depend on the structure and bonding of each element
Now compare how strongly the particles in each element are held together. Sodium, magnesium and aluminium have metallic bonding. Positive ions attract delocalised electrons that move freely through the lattice.
Each atom supplies one, two or three electrons, and the ions become smaller and more highly charged. Melting points therefore rise from sodium to aluminium.
Silicon has a giant covalent lattice, so melting breaks many strong bonds. Its melting point is the highest in the period.
Phosphorus, sulfur and chlorine form small molecules, and argon is single atoms. Weak London forces act between them and grow with the number of electrons. So melts higher than , then , then Ar.
Key terms · tap one for its definition
metallic bonding
Metallic bonding is the attraction between positive metal ions and delocalised electrons, which are free to move through the lattice.
giant covalent lattice
A giant covalent lattice is a continuous network of atoms joined by strong covalent bonds.
London forces
London forces are weak attractions between molecules caused by temporary dipoles, and they strengthen as the number of electrons increases.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 5 of 5: Metals become less reactive and non-metals more reactive across the period
These patterns explain how reactive each element is. Chemical reactivity depends on how easily an atom loses or gains electrons.
Metals react by losing electrons, so a low ionisation energy favours reaction. Sodium loses one electron easily and is the most reactive metal in the period. Magnesium and aluminium must lose two and three electrons, so they react less readily.
Non-metals react by gaining or sharing electrons, so a high electronegativity favours reaction. Chlorine attracts electrons strongly and is the most reactive non-metal in the period. Argon has a full outer shell and is unreactive.
Check your recall[15 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Explain[3 marks]
Explain why the atomic radius decreases from sodium to chlorine.
Show mark schemeHide mark scheme
Model answer
Nuclear charge increases because each element has one more proton. The extra electrons enter the same shell, so shielding stays about the same. The outer electrons are pulled closer to the nucleus.
- 1 mark for stating that nuclear charge increases across the period
- 1 mark for stating that electrons are added to the same shell so shielding is about constant
- 1 mark for concluding that the outer electrons are attracted more strongly and pulled closer
- 2.Explain[3 marks]
Explain why the first ionisation energy of sulfur is lower than that of phosphorus.
Show mark schemeHide mark scheme
Model answer
In sulfur, two electrons occupy the same 3p orbital. Repulsion between the paired electrons makes one of them easier to remove. Less energy is therefore needed than for phosphorus.
- 1 mark for stating that sulfur has two electrons paired in a 3p orbital
- 1 mark for explaining that repulsion between the paired electrons makes one easier to remove
- 1 mark for concluding that less energy is needed, so the ionisation energy is lower
- 3.Compare[3 marks]
Compare the melting points of sodium and aluminium using ideas about metallic bonding.
Show mark schemeHide mark scheme
Model answer
Aluminium has the higher melting point. Its ions have a higher charge and are smaller, and each atom gives more delocalised electrons. The attraction in the lattice is therefore stronger, so more energy is needed to melt it.
- 1 mark for stating that aluminium has the higher melting point
- 1 mark for stating that aluminium ions have a higher charge, are smaller and release more delocalised electrons
- 1 mark for explaining that the attraction is stronger so more energy is needed
- 4.Suggest[3 marks]
Suggest why sulfur has a higher melting point than chlorine.
Show mark schemeHide mark scheme
Model answer
Both are simple molecules held by London forces. A sulfur molecule, S₈, has more electrons than a chlorine molecule, Cl₂. Its London forces are stronger, so more energy is needed to separate the molecules.
- 1 mark for recognising that both are simple molecules with London forces between them
- 1 mark for stating that sulfur molecules have more electrons
- 1 mark for explaining that stronger London forces need more energy to overcome
- 5.State[1 mark]
State why argon has no electronegativity value.
Show mark schemeHide mark scheme
Model answer
Argon forms no covalent bonds, so it does not attract shared electrons.
- 1 mark for stating that argon does not form covalent bonds
- 6.Describe[2 marks]
Describe how the reactivity of sodium, magnesium and aluminium changes, and link it to ionisation energy.
Show mark schemeHide mark scheme
Model answer
Reactivity decreases from sodium to aluminium. This is because the ionisation energy increases, so electrons are harder to remove.
- 1 mark for stating that reactivity decreases from sodium to aluminium
- 1 mark for linking this to increasing ionisation energy and harder loss of electrons

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyIdentify[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumIdentify[1 mark]
Show answer and explanation
Answer: D · Worked explanation
MediumExplain[2 marks]
Show answer and explanation
Answer: B · Worked explanation
MediumExplain[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumExplain[1 mark]
Show answer and explanation
Answer: C · Worked explanation
HardIdentify[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardIdentify[2 marks]
Show answer and explanation
Answer: B · Worked explanation
HardIdentify[2 marks]
Show answer and explanation
Answer: A · Worked explanation