Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Chemistry
  3. ›3.2 Inorganic chemistry
  4. ›3.2.4 Period 3 elements and oxides

AQA A-level Chemistry · Section 3.2 · Inorganic chemistry

3.2.4 Period 3 elements and oxides

Describe how Period 3 elements react with oxygen and water, and relate the bonding in their oxides to acid–base character, pH and properties.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Period 3 elements burn in oxygen to form oxides
  1. 1Period 3 elements burn in oxygen to form oxides
  2. 2Sodium reacts vigorously with water, magnesium only slowly
  3. 3Bonding in an oxide decides its structure and melting point
  4. 4Metal oxides are basic and non-metal oxides are acidic
  5. 5Each oxide gives a predictable pH when added to water
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Period 3 elements burn in oxygen to form oxides

Burning magnesium gives a dazzling white flame, and burning sulfur gives a blue one. Each Period 3 element except argon burns in oxygen to form an oxide. All of these reactions are oxidation. Metal atoms lose electrons to oxygen, while non-metal atoms share electrons with it.

Burning Period 3 elements in oxygen

ElementObservationOxide formed
SodiumBright yellow flameNa2O\mathrm{Na_2O}Na2​O
MagnesiumBright white flameMgO\mathrm{MgO}MgO
AluminiumBurns when strongly heatedAl2O3\mathrm{Al_2O_3}Al2​O3​
SiliconNeeds very strong heatingSiO2\mathrm{SiO_2}SiO2​
PhosphorusWhite flame and white smokeP4O10\mathrm{P_4O_{10}}P4​O10​
SulfurBlue flameSO2\mathrm{SO_2}SO2​
Element
Sodium
Observation
Bright yellow flame
Oxide formed
Na2O\mathrm{Na_2O}Na2​O
Element
Magnesium
Observation
Bright white flame
Oxide formed
MgO\mathrm{MgO}MgO
Element
Aluminium
Observation
Burns when strongly heated
Oxide formed
Al2O3\mathrm{Al_2O_3}Al2​O3​
Element
Silicon
Observation
Needs very strong heating
Oxide formed
SiO2\mathrm{SiO_2}SiO2​
Element
Phosphorus
Observation
White flame and white smoke
Oxide formed
P4O10\mathrm{P_4O_{10}}P4​O10​
Element
Sulfur
Observation
Blue flame
Oxide formed
SO2\mathrm{SO_2}SO2​

The equation for magnesium is 2Mg(s)+O2(g)→2MgO(s)\mathrm{2Mg(s)+O_2(g)\rightarrow 2MgO(s)}2Mg(s)+O2​(g)→2MgO(s). Phosphorus forms phosphorus(V) oxide, P4O10\mathrm{P_4O_{10}}P4​O10​. Sulfur dioxide is a gas, whereas the other oxides are solids.

Exam tip

Learn one flame colour and one formula for each element. Write P4O10\mathrm{P_4O_{10}}P4​O10​ for phosphorus(V) oxide, and SO2\mathrm{SO_2}SO2​ for sulfur burning in air.

Key term

oxide

An oxide is a compound of oxygen with one other element.

Part 1 done

2

Part 2 of 5: Sodium reacts vigorously with water, magnesium only slowly

Oxygen is not the only reagent that separates the elements. Sodium reacts vigorously with cold water, giving hydrogen and a strongly alkaline solution: 2Na(s)+2H2O(l)→2NaOH(aq)+H2(g)\mathrm{2Na(s)+2H_2O(l)\rightarrow 2NaOH(aq)+H_2(g)}2Na(s)+2H2​O(l)→2NaOH(aq)+H2​(g).

Magnesium reacts very slowly with cold water. With steam it reacts quickly to give the oxide: Mg(s)+H2O(g)→MgO(s)+H2(g)\mathrm{Mg(s)+H_2O(g)\rightarrow MgO(s)+H_2(g)}Mg(s)+H2​O(g)→MgO(s)+H2​(g).

Aluminium, silicon, phosphorus and sulfur do not react with water under these conditions. Only metals that lose electrons very easily react, and these are sodium and magnesium.

Common mistake

Sodium does not form sodium oxide when it reacts with water. The products are sodium hydroxide and hydrogen.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the flame colour observed when magnesium burns in oxygen.
Show answer and explanation

Answer: B · Worked explanation

Magnesium burns with a bright white flame and forms white magnesium oxide. A bright yellow flame is seen when sodium burns, and a blue flame is seen when sulfur burns. Students often mix up the sodium and magnesium flames because both elements are metals that burn vigorously in oxygen.
3

Part 3 of 5: Bonding in an oxide decides its structure and melting point

The oxides formed above differ greatly in structure. Metals transfer electrons to oxygen, so Na2O\mathrm{Na_2O}Na2​O and MgO\mathrm{MgO}MgO are held together by ionic bonding. Aluminium oxide is also largely ionic.

Silicon dioxide has a giant covalent lattice. Phosphorus(V) oxide and sulfur dioxide are simple molecules, so only weak London forces act between their molecules.

Structure and melting point of Period 3 oxides

OxideStructureMelting point
Na2O\mathrm{Na_2O}Na2​OGiant ionicHigh
MgO\mathrm{MgO}MgOGiant ionicVery high
Al2O3\mathrm{Al_2O_3}Al2​O3​Giant ionicVery high
SiO2\mathrm{SiO_2}SiO2​Giant covalentVery high
P4O10\mathrm{P_4O_{10}}P4​O10​Simple molecularLow
SO2\mathrm{SO_2}SO2​Simple molecularVery low
Oxide
Na2O\mathrm{Na_2O}Na2​O
Structure
Giant ionic
Melting point
High
Oxide
MgO\mathrm{MgO}MgO
Structure
Giant ionic
Melting point
Very high
Oxide
Al2O3\mathrm{Al_2O_3}Al2​O3​
Structure
Giant ionic
Melting point
Very high
Oxide
SiO2\mathrm{SiO_2}SiO2​
Structure
Giant covalent
Melting point
Very high
Oxide
P4O10\mathrm{P_4O_{10}}P4​O10​
Structure
Simple molecular
Melting point
Low
Oxide
SO2\mathrm{SO_2}SO2​
Structure
Simple molecular
Melting point
Very low

Ionic oxides conduct electricity when molten, because their ions are free to move. Simple molecular oxides never conduct. Magnesium oxide melts higher than sodium oxide because its ions carry greater charges, so the attraction between them is stronger.

Key terms · tap one for its definition

ionic bonding

Ionic bonding is the electrostatic attraction between oppositely charged ions.

giant covalent lattice

A giant covalent lattice is a continuous network of atoms joined by strong covalent bonds.

London forces

London forces are weak attractions between molecules caused by temporary dipoles, and they strengthen as the number of electrons increases.

Part 3 done

4

Part 4 of 5: Metal oxides are basic and non-metal oxides are acidic

Structure also affects how an oxide behaves with acids and alkalis. A basic oxide neutralises acids to form a salt and water. Sodium oxide and magnesium oxide are basic, because the oxide ion accepts protons.

An acidic oxide neutralises bases to form a salt and water. Silicon dioxide, phosphorus(V) oxide and sulfur dioxide are acidic.

Aluminium oxide is amphoteric, so it reacts with both. It forms a salt with acid, Al2O3(s)+6HCl(aq)→2AlCl3(aq)+3H2O(l)\mathrm{Al_2O_3(s)+6HCl(aq)\rightarrow 2AlCl_3(aq)+3H_2O(l)}Al2​O3​(s)+6HCl(aq)→2AlCl3​(aq)+3H2​O(l). With hot concentrated sodium hydroxide, it forms NaAl(OH)4\mathrm{NaAl(OH)_4}NaAl(OH)4​.

Common mistake

Silicon dioxide is acidic even though it does not dissolve in water. It reacts with hot concentrated sodium hydroxide, forming a salt and water.

Key terms · tap one for its definition

basic oxide

A basic oxide is an oxide that neutralises acids to form a salt and water.

acidic oxide

An acidic oxide is an oxide that neutralises bases to form a salt and water.

amphoteric

An amphoteric oxide is an oxide that reacts with both acids and bases to form salts.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the products when sodium reacts with cold water.
Show answer and explanation

Answer: D · Worked explanation

Sodium reacts with cold water to form sodium hydroxide and hydrogen, as in 2Na(s)+2H2O(l)→2NaOH(aq)+H2(g)\mathrm{2Na(s)+2H_2O(l)\rightarrow 2NaOH(aq)+H_2(g)}2Na(s)+2H2​O(l)→2NaOH(aq)+H2​(g). Sodium oxide is the product when sodium burns in oxygen, not when it reacts with water. Oxygen is not released, because the hydrogen in water is the element that is displaced.
5

Part 5 of 5: Each oxide gives a predictable pH when added to water

These acid–base properties let us predict the pH of an oxide in water. Soluble basic oxides give hydroxide ions, so the solution is alkaline. Sodium oxide reacts as Na2O(s)+H2O(l)→2NaOH(aq)\mathrm{Na_2O(s)+H_2O(l)\rightarrow 2NaOH(aq)}Na2​O(s)+H2​O(l)→2NaOH(aq).

Acidic oxides form acids. Phosphorus(V) oxide gives phosphoric acid: P4O10(s)+6H2O(l)→4H3PO4(aq)\mathrm{P_4O_{10}(s)+6H_2O(l)\rightarrow 4H_3PO_4(aq)}P4​O10​(s)+6H2​O(l)→4H3​PO4​(aq). Aluminium oxide and silicon dioxide are insoluble, so the pH stays at about 7. Magnesium oxide is only slightly soluble, so its solution is only weakly alkaline. Sulfur dioxide gives a weakly acidic solution.

Approximate pH of Period 3 oxides in water

OxideSpecies in solutionApproximate pH
Na2O\mathrm{Na_2O}Na2​ONaOH\mathrm{NaOH}NaOH13 to 14
MgO\mathrm{MgO}MgOMg(OH)2\mathrm{Mg(OH)_2}Mg(OH)2​, slightly soluble9 to 10
Al2O3\mathrm{Al_2O_3}Al2​O3​ and SiO2\mathrm{SiO_2}SiO2​InsolubleAbout 7
P4O10\mathrm{P_4O_{10}}P4​O10​H3PO4\mathrm{H_3PO_4}H3​PO4​0 to 2
SO2\mathrm{SO_2}SO2​H2SO3\mathrm{H_2SO_3}H2​SO3​2 to 3
Oxide
Na2O\mathrm{Na_2O}Na2​O
Species in solution
NaOH\mathrm{NaOH}NaOH
Approximate pH
13 to 14
Oxide
MgO\mathrm{MgO}MgO
Species in solution
Mg(OH)2\mathrm{Mg(OH)_2}Mg(OH)2​, slightly soluble
Approximate pH
9 to 10
Oxide
Al2O3\mathrm{Al_2O_3}Al2​O3​ and SiO2\mathrm{SiO_2}SiO2​
Species in solution
Insoluble
Approximate pH
About 7
Oxide
P4O10\mathrm{P_4O_{10}}P4​O10​
Species in solution
H3PO4\mathrm{H_3PO_4}H3​PO4​
Approximate pH
0 to 2
Oxide
SO2\mathrm{SO_2}SO2​
Species in solution
H2SO3\mathrm{H_2SO_3}H2​SO3​
Approximate pH
2 to 3

Worked example

Concentration from an oxide

Calculate the concentration of sodium hydroxide formed when 0.0100 mol0.0100\,\mathrm{mol}0.0100mol of sodium oxide dissolves in water to make 250 cm3250\,\mathrm{cm^3}250cm3 of solution.
  1. 1
    Equation: Na2O(s)+H2O(l)→2NaOH(aq)\mathrm{Na_2O(s)+H_2O(l)\rightarrow 2NaOH(aq)}Na2​O(s)+H2​O(l)→2NaOH(aq), so the ratio is 1 : 2.
  2. 2
    Amount of NaOH=2×0.0100 mol=0.0200 mol\mathrm{NaOH}=2\times0.0100\,\mathrm{mol}=0.0200\,\mathrm{mol}NaOH=2×0.0100mol=0.0200mol.
  3. 3
    Volume =2501000 dm3=0.250 dm3=\frac{250}{1000}\,\mathrm{dm^3}=0.250\,\mathrm{dm^3}=1000250​dm3=0.250dm3.
  4. 4
    Use c=nV=0.0200 mol0.250 dm3c=\frac{n}{V}=\frac{0.0200\,\mathrm{mol}}{0.250\,\mathrm{dm^3}}c=Vn​=0.250dm30.0200mol​.

Answer: The concentration is 0.0800 mol dm−30.0800\,\mathrm{mol\,dm^{-3}}0.0800moldm−3.

Exam tip

To predict a pH, write the oxide plus water equation, then decide whether hydroxide ions or hydrogen ions form.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe what you observe when sodium burns and when magnesium burns in oxygen.

    Show mark schemeHide mark scheme

    Model answer

    Sodium burns with a bright yellow flame. Magnesium burns with a bright white flame.

    • 1 mark for stating that sodium burns with a bright yellow flame
    • 1 mark for stating that magnesium burns with a bright white flame
  2. 2.Explain[3 marks]

    Explain why magnesium oxide has a high melting point but sulfur dioxide has a low melting point.

    Show mark schemeHide mark scheme

    Model answer

    Magnesium oxide has a giant ionic lattice with strong ionic bonding, so much energy is needed to melt it. Sulfur dioxide is made of simple molecules. Only weak London forces act between them, so little energy is needed.

    • 1 mark for stating that magnesium oxide has a giant ionic lattice with strong bonding
    • 1 mark for stating that sulfur dioxide is simple molecular with weak London forces between molecules
    • 1 mark for linking the strength of attraction to the energy needed to melt
  3. 3.Give[2 marks]

    Give the equation, with state symbols, for the reaction of sodium oxide with water, and state the approximate pH of the solution formed.

    Show mark schemeHide mark scheme

    Model answer

    Na2O(s)+H2O(l)→2NaOH(aq)\mathrm{Na_2O(s)+H_2O(l)\rightarrow 2NaOH(aq)}Na2​O(s)+H2​O(l)→2NaOH(aq). The pH is about 13 to 14.

    • 1 mark for giving the balanced equation with correct state symbols
    • 1 mark for stating a pH of about 13 to 14
  4. 4.Describe[3 marks]

    Describe how aluminium oxide shows that it is amphoteric.

    Show mark schemeHide mark scheme

    Model answer

    Aluminium oxide reacts with an acid such as hydrochloric acid to form a salt and water. It also reacts with hot concentrated sodium hydroxide to form a salt. This shows that it reacts with both acids and bases.

    • 1 mark for stating that it reacts with an acid to form a salt and water
    • 1 mark for stating that it reacts with a base such as hot concentrated sodium hydroxide
    • 1 mark for concluding that reacting with both shows it is amphoteric
  5. 5.Suggest[2 marks]

    Suggest why silicon dioxide does not change the pH of water.

    Show mark schemeHide mark scheme

    Model answer

    Silicon dioxide has a giant covalent lattice with strong bonds. It is insoluble and does not react with water, so no ions form.

    • 1 mark for stating that it is a giant covalent lattice or is insoluble
    • 1 mark for stating that it does not react with water, so the pH stays at about 7
  6. 6.Compare[3 marks]

    Compare the solutions formed when sodium oxide and phosphorus(V) oxide are added to water.

    Show mark schemeHide mark scheme

    Model answer

    Sodium oxide forms sodium hydroxide, which is strongly alkaline with a pH of about 13 to 14. Phosphorus(V) oxide forms phosphoric acid, which is strongly acidic with a pH of about 0 to 2. Sodium oxide is a basic metal oxide and phosphorus(V) oxide is an acidic non-metal oxide.

    • 1 mark for stating that sodium oxide gives an alkaline solution of sodium hydroxide
    • 1 mark for stating that phosphorus(V) oxide gives an acidic solution of phosphoric acid
    • 1 mark for linking the difference to basic and acidic oxides

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the structure of solid silicon dioxide.
Show answer and explanation

Answer: A · Worked explanation

Silicon dioxide is a giant covalent lattice, with each silicon atom bonded to oxygen atoms throughout a continuous network. This gives it a very high melting point. It is not ionic, because silicon is a non-metal. It is not simple molecular, because that structure has low melting points, which silicon dioxide does not.
4.

Medium·Predict[1 mark]

Predict the approximate pH of the solution formed when phosphorus(V) oxide reacts with excess water.
Show answer and explanation

Answer: C · Worked explanation

Phosphorus(V) oxide is an acidic oxide. It reacts with water to form phosphoric acid, giving a strongly acidic solution of about pH 1. A value of about 13 would apply to a strongly alkaline solution such as sodium hydroxide. A pH of about 7 would apply to an insoluble oxide such as silicon dioxide.
5.

Medium·Identify[1 mark]

Identify the oxide that reacts with both dilute hydrochloric acid and hot concentrated sodium hydroxide solution.
Show answer and explanation

Answer: B · Worked explanation

Aluminium oxide is amphoteric, so it reacts with acids and with bases. Silicon dioxide reacts with hot concentrated sodium hydroxide but does not react with dilute hydrochloric acid. Magnesium oxide is basic and reacts only with acid, and sulfur dioxide is acidic and reacts only with bases.
6.

Medium·Explain[1 mark]

Explain why molten sodium oxide conducts electricity but liquid sulfur dioxide does not.
Show answer and explanation

Answer: A · Worked explanation

Molten sodium oxide contains sodium ions and oxide ions that are free to move and carry charge. Sulfur dioxide is made of neutral molecules, so no charged particles are available. Sodium oxide has no delocalised electrons, because that describes a metal. The strength of covalent bonds is irrelevant to conduction.
7.

Medium·Calculate[2 marks]

0.0250 mol0.0250\,\mathrm{mol}0.0250mol of phosphorus(V) oxide reacts completely with excess water: P4O10(s)+6H2O(l)→4H3PO4(aq)\mathrm{P_4O_{10}(s)+6H_2O(l)\rightarrow 4H_3PO_4(aq)}P4​O10​(s)+6H2​O(l)→4H3​PO4​(aq). Calculate the amount of phosphoric acid formed.
Show answer and explanation

Answer: D · Worked explanation

The equation shows a ratio of 1 : 4, so the amount of phosphoric acid is 4×0.0250=0.100 mol4\times0.0250=0.100\,\mathrm{mol}4×0.0250=0.100mol. The value 0.0250 mol0.0250\,\mathrm{mol}0.0250mol comes from assuming a 1 : 1 ratio. The value 0.150 mol0.150\,\mathrm{mol}0.150mol uses the 6 from the water in the equation instead of the 4 from phosphoric acid.
8.

Hard·Identify[2 marks]

A white solid oxide is insoluble in water and has a very high melting point. It does not react with dilute hydrochloric acid, but it reacts with hot concentrated sodium hydroxide solution. Identify the oxide.
Show answer and explanation

Answer: C · Worked explanation

Silicon dioxide is insoluble, has a giant covalent lattice and very high melting point, and is acidic, so it reacts with hot concentrated sodium hydroxide but not with acid. Aluminium oxide is similar but reacts with dilute hydrochloric acid as well, because it is amphoteric. Phosphorus(V) oxide is a molecular solid and reacts readily with water.
9.

Hard·Explain[2 marks]

A student measures the pH of the solutions formed by adding sodium oxide and magnesium oxide to water. Sodium oxide gives about pH 14 and magnesium oxide gives about pH 10. Identify the best explanation.
Show answer and explanation

Answer: B · Worked explanation

Both oxides are ionic and basic. Magnesium oxide dissolves only slightly, so the solution contains fewer hydroxide ions than a solution of sodium hydroxide and its pH is lower. Magnesium oxide is not acidic, because it reacts with acids, and it is not covalent. A basic oxide cannot form an acid in water.
10.

Hard·Calculate[2 marks]

0.0300 mol0.0300\,\mathrm{mol}0.0300mol of sodium oxide dissolves in water to make 500 cm3500\,\mathrm{cm^3}500cm3 of solution. Calculate the concentration of sodium hydroxide formed.
Show answer and explanation

Answer: A · Worked explanation

The equation Na2O(s)+H2O(l)→2NaOH(aq)\mathrm{Na_2O(s)+H_2O(l)\rightarrow 2NaOH(aq)}Na2​O(s)+H2​O(l)→2NaOH(aq) gives 2×0.0300=0.0600 mol2\times0.0300=0.0600\,\mathrm{mol}2×0.0300=0.0600mol of sodium hydroxide. The volume is 0.500 dm30.500\,\mathrm{dm^3}0.500dm3, so c=0.06000.500=0.120 mol dm−3c=\frac{0.0600}{0.500}=0.120\,\mathrm{mol\,dm^{-3}}c=0.5000.0600​=0.120moldm−3. The value 0.0600 mol dm−30.0600\,\mathrm{mol\,dm^{-3}}0.0600moldm−3 comes from ignoring the 1 : 2 ratio, which is the most tempting slip. The value 0.240 mol dm−30.240\,\mathrm{mol\,dm^{-3}}0.240moldm−3 comes from using 250 cm3250\,\mathrm{cm^3}250cm3 instead of 500 cm3500\,\mathrm{cm^3}500cm3.

Keep going

Next topic3.2.5 Transition metalsPrevious topic3.2.3 Group 7, the halogens

More in Section 3.2 · Inorganic chemistry

  1. 3.2.1PeriodicityNotes · 10 questions
  2. 3.2.2Group 2Notes · 10 questions
  3. 3.2.3Group 7, the halogensNotes · 10 questions
  4. 3.2.4Period 3 elements and oxidesNotes · 10 questions
  5. 3.2.5Transition metalsNotes · 10 questions
  6. 3.2.6Ions in aqueous solutionNotes · 10 questions

All AQA A-level Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1Period 3 elements burn in oxygen to form oxides
  2. 2Sodium reacts vigorously with water, magnesium only slowly
  3. 3Bonding in an oxide decides its structure and melting point
  4. 4Metal oxides are basic and non-metal oxides are acidic
  5. 5Each oxide gives a predictable pH when added to water
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe