Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Chemistry
  3. ›3.2 Inorganic chemistry
  4. ›3.2.6 Ions in aqueous solution

AQA A-level Chemistry · Section 3.2 · Inorganic chemistry

3.2.6 Ions in aqueous solution

Describe how metal aqua ions form, explain their acidity and reactions with bases, and use precipitation tests to identify metal ions.

  • 3 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Metal ions in water bond to six water ligands
  1. 1Metal ions in water bond to six water ligands
  2. 2Highly charged metal ions make aqua ions acidic
  3. 3Hydroxide ions remove protons to form precipitates
  4. 4Excess reagent can dissolve a precipitate
  5. 5A few reagents are enough to identify unknown ions
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Metal ions in water bond to six water ligands

Dissolve copper(II) sulfate in water and the solution turns blue. Water molecules are polar, and each has lone pairs on its oxygen atom. They act as a ligand, donating a lone pair to the metal ion.

The result is an aqua ion, usually with six water ligands in an octahedral arrangement. Ions with a 2+ charge have the form [M(H2O)6]2+\mathrm{[M(H_2O)_6]^{2+}}[M(H2​O)6​]2+. Ions with a 3+ charge have the form [M(H2O)6]3+\mathrm{[M(H_2O)_6]^{3+}}[M(H2​O)6​]3+.

Colours of dilute aqueous solutions

Aqua ionColour
[Cu(H2O)6]2+\mathrm{[Cu(H_2O)_6]^{2+}}[Cu(H2​O)6​]2+blue
[Fe(H2O)6]2+\mathrm{[Fe(H_2O)_6]^{2+}}[Fe(H2​O)6​]2+pale green
[Fe(H2O)6]3+\mathrm{[Fe(H_2O)_6]^{3+}}[Fe(H2​O)6​]3+yellow-brown
[Al(H2O)6]3+\mathrm{[Al(H_2O)_6]^{3+}}[Al(H2​O)6​]3+colourless
[Mg(H2O)6]2+\mathrm{[Mg(H_2O)_6]^{2+}}[Mg(H2​O)6​]2+colourless
Aqua ion
[Cu(H2O)6]2+\mathrm{[Cu(H_2O)_6]^{2+}}[Cu(H2​O)6​]2+
Colour
blue
Aqua ion
[Fe(H2O)6]2+\mathrm{[Fe(H_2O)_6]^{2+}}[Fe(H2​O)6​]2+
Colour
pale green
Aqua ion
[Fe(H2O)6]3+\mathrm{[Fe(H_2O)_6]^{3+}}[Fe(H2​O)6​]3+
Colour
yellow-brown
Aqua ion
[Al(H2O)6]3+\mathrm{[Al(H_2O)_6]^{3+}}[Al(H2​O)6​]3+
Colour
colourless
Aqua ion
[Mg(H2O)6]2+\mathrm{[Mg(H_2O)_6]^{2+}}[Mg(H2​O)6​]2+
Colour
colourless

Exam tip

For questions on acidity or precipitates, write the full aqua ion, such as [Fe(H2O)6]3+\mathrm{[Fe(H_2O)_6]^{3+}}[Fe(H2​O)6​]3+, not just Fe3+\mathrm{Fe^{3+}}Fe3+.

Key terms · tap one for its definition

ligand

A ligand donates an electron pair to a central metal atom or ion.

aqua ion

An aqua ion is a metal ion surrounded by water ligands, such as [Cu(H2O)6]2+\mathrm{[Cu(H_2O)_6]^{2+}}[Cu(H2​O)6​]2+.

Part 1 done

2

Part 2 of 5: Highly charged metal ions make aqua ions acidic

The water ligands in an aqua ion are not quite the same as free water. The metal ion pulls electron density from them. This weakens their O–H bonds, so a ligand can lose a proton to a nearby water molecule.

The effect grows with charge density. A 3+ ion has a higher charge density than a 2+ ion of similar size. Its solution is therefore more acidic. A 2+ aqua ion is only weakly acidic.

[Fe(H2O)6]3+(aq)+H2O(l)⇌[Fe(H2O)5(OH)]2+(aq)+H3O+(aq)\mathrm{[Fe(H_2O)_6]^{3+}(aq)+H_2O(l)\rightleftharpoons[Fe(H_2O)_5(OH)]^{2+}(aq)+H_3O^+(aq)}[Fe(H2​O)6​]3+(aq)+H2​O(l)⇌[Fe(H2​O)5​(OH)]2+(aq)+H3​O+(aq)

The aqua ion is the proton donor, so it acts as an acid.

Common mistake

Do not say that the metal ion itself releases a proton. The proton comes from a water ligand.

Key term

charge density

The charge density of an ion is its charge relative to its radius, so small ions with a high charge have a high charge density.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the formula of the aqua ion formed by iron(III) ions in water.
Show answer and explanation

Answer: A · Worked explanation

Iron(III) is the 3+ ion, and it is surrounded by six neutral water ligands, so the charge stays 3+. The version with a 2+ charge is the iron(II) aqua ion. A formula with three water ligands gives the wrong coordination number.
3

Part 3 of 5: Hydroxide ions remove protons to form precipitates

A stronger base removes more protons from the ligands. Each loss lowers the charge on the complex. After two or three protons are lost, the complex is neutral. A neutral complex is insoluble, so it separates as a precipitate.

Each step removes one proton from one water ligand. A 2+ ion needs two hydroxide ions to become neutral, and a 3+ ion needs three. The colour of the precipitate depends on the metal, which makes it a useful test.

[Cu(H2O)6]2+(aq)+2OH−(aq)→[Cu(H2O)4(OH)2](s)+2H2O(l)\mathrm{[Cu(H_2O)_6]^{2+}(aq)+2OH^-(aq)\rightarrow[Cu(H_2O)_4(OH)_2](s)+2H_2O(l)}[Cu(H2​O)6​]2+(aq)+2OH−(aq)→[Cu(H2​O)4​(OH)2​](s)+2H2​O(l)

[Fe(H2O)6]3+(aq)+3OH−(aq)→[Fe(H2O)3(OH)3](s)+3H2O(l)\mathrm{[Fe(H_2O)_6]^{3+}(aq)+3OH^-(aq)\rightarrow[Fe(H_2O)_3(OH)_3](s)+3H_2O(l)}[Fe(H2​O)6​]3+(aq)+3OH−(aq)→[Fe(H2​O)3​(OH)3​](s)+3H2​O(l)

Dilute ammonia solution acts as a base in the same way and gives the same precipitates. Ammonia takes each proton and becomes NH4+\mathrm{NH_4^+}NH4+​: [Cu(H2O)6]2+(aq)+2NH3(aq)→[Cu(H2O)4(OH)2](s)+2NH4+(aq)\mathrm{[Cu(H_2O)_6]^{2+}(aq)+2NH_3(aq)\rightarrow[Cu(H_2O)_4(OH)_2](s)+2NH_4^+(aq)}[Cu(H2​O)6​]2+(aq)+2NH3​(aq)→[Cu(H2​O)4​(OH)2​](s)+2NH4+​(aq).

Key term

precipitate

A precipitate is an insoluble solid formed from dissolved ions during a reaction in solution.

Part 3 done

4

Part 4 of 5: Excess reagent can dissolve a precipitate

Some precipitates vanish when more reagent is added. Aluminium hydroxide dissolves in excess sodium hydroxide. It reacts with hydroxide ions as an acid would. It also dissolves in acid, where it behaves as a base. A hydroxide that reacts with both acids and bases is amphoteric.

[Al(H2O)3(OH)3](s)+OH−(aq)→[Al(H2O)2(OH)4]−(aq)+H2O(l)\mathrm{[Al(H_2O)_3(OH)_3](s)+OH^-(aq)\rightarrow[Al(H_2O)_2(OH)_4]^-(aq)+H_2O(l)}[Al(H2​O)3​(OH)3​](s)+OH−(aq)→[Al(H2​O)2​(OH)4​]−(aq)+H2​O(l)

Copper(II) hydroxide behaves differently. Excess ammonia replaces ligands, and the precipitate dissolves to a deep blue solution: [Cu(H2O)4(OH)2](s)+4NH3(aq)→[Cu(NH3)4(H2O)2]2+(aq)+2H2O(l)+2OH−(aq)\mathrm{[Cu(H_2O)_4(OH)_2](s)+4NH_3(aq)\rightarrow[Cu(NH_3)_4(H_2O)_2]^{2+}(aq)+2H_2O(l)+2OH^-(aq)}[Cu(H2​O)4​(OH)2​](s)+4NH3​(aq)→[Cu(NH3​)4​(H2​O)2​]2+(aq)+2H2​O(l)+2OH−(aq).

Observations with hydroxide and ammonia

IonFew drops NaOHExcess NaOHExcess NH3
Cu2+\mathrm{Cu^{2+}}Cu2+blue precipitateno changedeep blue solution
Fe2+\mathrm{Fe^{2+}}Fe2+green precipitateno changeno change
Fe3+\mathrm{Fe^{3+}}Fe3+brown precipitateno changeno change
Al3+\mathrm{Al^{3+}}Al3+white precipitatecolourless solutionno change
Mg2+\mathrm{Mg^{2+}}Mg2+white precipitateno changeno change
Ion
Cu2+\mathrm{Cu^{2+}}Cu2+
Few drops NaOH
blue precipitate
Excess NaOH
no change
Excess NH3
deep blue solution
Ion
Fe2+\mathrm{Fe^{2+}}Fe2+
Few drops NaOH
green precipitate
Excess NaOH
no change
Excess NH3
no change
Ion
Fe3+\mathrm{Fe^{3+}}Fe3+
Few drops NaOH
brown precipitate
Excess NaOH
no change
Excess NH3
no change
Ion
Al3+\mathrm{Al^{3+}}Al3+
Few drops NaOH
white precipitate
Excess NaOH
colourless solution
Excess NH3
no change
Ion
Mg2+\mathrm{Mg^{2+}}Mg2+
Few drops NaOH
white precipitate
Excess NaOH
no change
Excess NH3
no change

Common mistake

Do not explain a dissolving precipitate as the effect of more base. Name the change: an amphoteric reaction with hydroxide, or ligand exchange with ammonia.

Key term

amphoteric

An amphoteric hydroxide is one that reacts with both acids and excess alkali, forming soluble products in each case.

Part 4 done

Quick check

One question on the part you just read

Easy

State the colour of the precipitate formed when a few drops of sodium hydroxide solution are added to aqueous iron(III) ions.
Show answer and explanation

Answer: C · Worked explanation

Hydroxide ions remove protons and form the neutral complex [Fe(H2O)3(OH)3]\mathrm{[Fe(H_2O)_3(OH)_3]}[Fe(H2​O)3​(OH)3​], a brown precipitate. Green is the colour of iron(II) hydroxide, and blue belongs to copper(II) hydroxide. White is the colour of aluminium and magnesium hydroxides. Colour is the main clue used in these tests.
5

Part 5 of 5: A few reagents are enough to identify unknown ions

Now the patterns can serve as tests. Add sodium hydroxide dropwise to a sample, note the precipitate colour, then add excess. The colour separates copper(II), iron(II) and iron(III). A white precipitate that dissolves in excess points to aluminium. One that stays points to magnesium.

Sodium carbonate gives a second test. A 2+ ion forms a metal carbonate precipitate, such as Mg2+(aq)+CO32−(aq)→MgCO3(s)\mathrm{Mg^{2+}(aq)+CO_3^{2-}(aq)\rightarrow MgCO_3(s)}Mg2+(aq)+CO32−​(aq)→MgCO3​(s). A 3+ aqua ion is acidic enough to release protons, which react with carbonate ions to give carbon dioxide.

2[Fe(H2O)6]3+(aq)+3CO32−(aq)→2[Fe(H2O)3(OH)3](s)+3CO2(g)+3H2O(l)\mathrm{2[Fe(H_2O)_6]^{3+}(aq)+3CO_3^{2-}(aq)\rightarrow2[Fe(H_2O)_3(OH)_3](s)+3CO_2(g)+3H_2O(l)}2[Fe(H2​O)6​]3+(aq)+3CO32−​(aq)→2[Fe(H2​O)3​(OH)3​](s)+3CO2​(g)+3H2​O(l)

Exam tip

Report the colour of each precipitate and what happens in excess. One observation alone rarely identifies an ion.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the formula and colour of the aqua ion present in aqueous copper(II) sulfate.

    Show mark schemeHide mark scheme

    Model answer

    The aqua ion is [Cu(H2O)6]2+\mathrm{[Cu(H_2O)_6]^{2+}}[Cu(H2​O)6​]2+ and it is blue.

    • 1 mark for giving the formula [Cu(H2O)6]2+\mathrm{[Cu(H_2O)_6]^{2+}}[Cu(H2​O)6​]2+
    • 1 mark for stating that the colour is blue
  2. 2.Explain[3 marks]

    Explain why an aqueous solution of iron(III) ions is more acidic than a solution of iron(II) ions of the same concentration.

    Show mark schemeHide mark scheme

    Model answer

    The 3+ ion has a higher charge density than the 2+ ion. It polarises the O–H bonds in its water ligands more strongly. A ligand therefore loses a proton more readily, producing more H3O+\mathrm{H_3O^+}H3​O+.

    • 1 mark for stating that the 3+ ion has a higher charge density
    • 1 mark for explaining that it polarises or weakens the O–H bonds in the water ligands more
    • 1 mark for stating that more protons are released, so more H3O+\mathrm{H_3O^+}H3​O+ forms
  3. 3.Describe[3 marks]

    Describe what you would observe when sodium hydroxide solution is added dropwise, and then in excess, to aqueous aluminium ions.

    Show mark schemeHide mark scheme

    Model answer

    A white precipitate forms. It dissolves in excess sodium hydroxide to give a colourless solution.

    • 1 mark for stating that a white precipitate forms
    • 1 mark for stating that the precipitate dissolves in excess sodium hydroxide
    • 1 mark for stating that the final solution is colourless
  4. 4.Give[2 marks]

    Give the equation, with state symbols, for the reaction of [Cu(H2O)6]2+(aq)\mathrm{[Cu(H_2O)_6]^{2+}(aq)}[Cu(H2​O)6​]2+(aq) with hydroxide ions to form a precipitate.

    Show mark schemeHide mark scheme

    Model answer

    [Cu(H2O)6]2+(aq)+2OH−(aq)→[Cu(H2O)4(OH)2](s)+2H2O(l)\mathrm{[Cu(H_2O)_6]^{2+}(aq)+2OH^-(aq)\rightarrow[Cu(H_2O)_4(OH)_2](s)+2H_2O(l)}[Cu(H2​O)6​]2+(aq)+2OH−(aq)→[Cu(H2​O)4​(OH)2​](s)+2H2​O(l)

    • 1 mark for giving [Cu(H2O)4(OH)2](s)\mathrm{[Cu(H_2O)_4(OH)_2](s)}[Cu(H2​O)4​(OH)2​](s) as the precipitate
    • 1 mark for balancing the equation with 2OH−\mathrm{2OH^-}2OH− and 2H2O\mathrm{2H_2O}2H2​O and correct state symbols
  5. 5.Explain[2 marks]

    Explain why aluminium hydroxide dissolves in excess sodium hydroxide solution.

    Show mark schemeHide mark scheme

    Model answer

    Aluminium hydroxide is amphoteric. It reacts with excess hydroxide ions to form the soluble complex [Al(H2O)2(OH)4]−\mathrm{[Al(H_2O)_2(OH)_4]^-}[Al(H2​O)2​(OH)4​]−.

    • 1 mark for stating that aluminium hydroxide is amphoteric and reacts as an acid with hydroxide ions
    • 1 mark for stating that a soluble complex such as [Al(H2O)2(OH)4]−\mathrm{[Al(H_2O)_2(OH)_4]^-}[Al(H2​O)2​(OH)4​]− forms
  6. 6.Suggest[3 marks]

    Suggest a test that distinguishes aqueous iron(II) ions from aqueous iron(III) ions, and state the observations.

    Show mark schemeHide mark scheme

    Model answer

    Add sodium hydroxide solution to each sample. Iron(II) gives a green precipitate and iron(III) gives a brown precipitate.

    • 1 mark for adding sodium hydroxide solution to each sample
    • 1 mark for stating that iron(II) gives a green precipitate
    • 1 mark for stating that iron(III) gives a brown precipitate

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the proton donor in the forward reaction [Fe(H2O)6]3++H2O⇌[Fe(H2O)5(OH)]2++H3O+\mathrm{[Fe(H_2O)_6]^{3+}+H_2O\rightleftharpoons[Fe(H_2O)_5(OH)]^{2+}+H_3O^+}[Fe(H2​O)6​]3++H2​O⇌[Fe(H2​O)5​(OH)]2++H3​O+.
Show answer and explanation

Answer: D · Worked explanation

The 3+ aqua ion loses a proton from one of its water ligands, so it is the proton donor. The free water molecule accepts that proton to form H3O+\mathrm{H_3O^+}H3​O+, so it is the proton acceptor in the forward direction. The reverse direction also occurs, which is why the equation uses equilibrium arrows.
4.

Medium·Identify[1 mark]

Two aqueous solutions of iron salts have the same concentration. Identify the more acidic solution and the reason.
Show answer and explanation

Answer: B · Worked explanation

A 3+ ion has a higher charge density than a 2+ ion of similar size, so it polarises the O–H bonds in its water ligands more strongly and releases protons more readily. The claim that the 2+ ion has the higher charge density reverses this link, and both ions have the same number of ligands.
5.

Medium·Determine[1 mark]

An aluminium aqua ion reacts with three hydroxide ions per ion. Determine the number of water ligands in the neutral solid formed.
Show answer and explanation

Answer: C · Worked explanation

Each hydroxide ion removes a proton from a water ligand and turns it into OH−\mathrm{OH^-}OH−. Three removals leave three water ligands, giving [Al(H2O)3(OH)3]\mathrm{[Al(H_2O)_3(OH)_3]}[Al(H2​O)3​(OH)3​]. Four water ligands remain in the neutral solid from a 2+ ion, which loses only two protons.
6.

Medium·Determine[1 mark]

Determine the oxidation state of iron in [Fe(H2O)5(OH)]2+\mathrm{[Fe(H_2O)_5(OH)]^{2+}}[Fe(H2​O)5​(OH)]2+.
Show answer and explanation

Answer: D · Worked explanation

Water is neutral and hydroxide is 1−, so x+0+(−1)=+2x+0+(-1)=+2x+0+(−1)=+2 and x=+3x=+3x=+3. An answer of +2 copies the charge on the complex and ignores the hydroxide ligand. The complex forms when the iron(III) aqua ion loses a proton, which leaves the oxidation state unchanged.
7.

Medium·Identify[1 mark]

A solution gives a white precipitate with a few drops of sodium hydroxide. The precipitate stays white in excess sodium hydroxide. Identify the ion the solution could contain.
Show answer and explanation

Answer: A · Worked explanation

Magnesium hydroxide is white and does not dissolve in excess hydroxide. Aluminium hydroxide is also white but dissolves in excess, so its precipitate would disappear. Iron(II) and copper(II) hydroxides are green and blue, not white. Excess hydroxide is the key step, because it separates aluminium from magnesium.
8.

Hard·Predict[2 marks]

Predict the observations when sodium carbonate solution is added to aqueous iron(III) chloride.
Show answer and explanation

Answer: B · Worked explanation

The 3+ aqua ion is acidic enough to release protons, which react with carbonate ions to give carbon dioxide. Loss of protons leaves [Fe(H2O)3(OH)3]\mathrm{[Fe(H_2O)_3(OH)_3]}[Fe(H2​O)3​(OH)3​], a brown solid. A carbonate precipitate with no gas is the pattern for 2+ ions, such as magnesium.
9.

Hard·Explain[2 marks]

Explain why aluminium hydroxide dissolves in excess sodium hydroxide but iron(III) hydroxide does not.
Show answer and explanation

Answer: C · Worked explanation

Aluminium hydroxide is amphoteric. With excess hydroxide it acts as an acid and forms [Al(H2O)2(OH)4]−\mathrm{[Al(H_2O)_2(OH)_4]^-}[Al(H2​O)2​(OH)4​]−, which is soluble. Iron(III) hydroxide does not react in this way. Calling aluminium hydroxide a stronger base is wrong, because dissolving in alkali shows acidic behaviour.
10.

Hard·Predict[2 marks]

Ammonia solution is added slowly, and then in excess, to aqueous copper(II) sulfate. Predict the observations in order.
Show answer and explanation

Answer: D · Worked explanation

Limited ammonia acts as a base and forms the blue precipitate [Cu(H2O)4(OH)2]\mathrm{[Cu(H_2O)_4(OH)_2]}[Cu(H2​O)4​(OH)2​]. Excess ammonia replaces ligands and gives the deep blue [Cu(NH3)4(H2O)2]2+\mathrm{[Cu(NH_3)_4(H_2O)_2]^{2+}}[Cu(NH3​)4​(H2​O)2​]2+. A precipitate that stays is the pattern for iron hydroxides, and a colourless solution belongs to aluminium in excess sodium hydroxide.

Keep going

Next topic3.3.1 Introduction to organic chemistryPrevious topic3.2.5 Transition metals

More in Section 3.2 · Inorganic chemistry

  1. 3.2.1PeriodicityNotes · 10 questions
  2. 3.2.2Group 2Notes · 10 questions
  3. 3.2.3Group 7, the halogensNotes · 10 questions
  4. 3.2.4Period 3 elements and oxidesNotes · 10 questions
  5. 3.2.5Transition metalsNotes · 10 questions
  6. 3.2.6Ions in aqueous solutionNotes · 10 questions

All AQA A-level Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1Metal ions in water bond to six water ligands
  2. 2Highly charged metal ions make aqua ions acidic
  3. 3Hydroxide ions remove protons to form precipitates
  4. 4Excess reagent can dissolve a precipitate
  5. 5A few reagents are enough to identify unknown ions
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe