Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Chemistry
  3. ›3.2 Inorganic chemistry
  4. ›3.2.5 Transition metals

AQA A-level Chemistry · Section 3.2 · Inorganic chemistry

3.2.5 Transition metals

Describe the properties of transition metals, explain complex ions, ligands, colour and chelation, and describe ligand substitution and precipitation.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Transition metals have partly filled d sub-levels
  1. 1Transition metals have partly filled d sub-levels
  2. 2Ligands bond to a central ion in complex ions
  3. 3Split d orbitals absorb part of visible light
  4. 4Multidentate ligands form more stable chelate complexes
  5. 5Ligand substitution changes colour and sometimes coordination number
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Transition metals have partly filled d sub-levels

Iron, copper and chromium sit in the middle block of the periodic table. Most of these d-block elements are transition elements. Their behaviour comes from electrons in the d sub-level, which can take part in bonding. They share four properties that most other metals lack.

  • coloured compounds and ions
  • variable oxidation states, such as iron(II) and iron(III)
  • the ability to form complex ions
  • catalytic activity, such as iron in the Haber process

Common mistake

Zinc and scandium are d-block elements but not transition elements. Zinc forms only Zn2+\mathrm{Zn^{2+}}Zn2+ with a full d sub-level, and scandium forms only Sc3+\mathrm{Sc^{3+}}Sc3+ with an empty one.

Key term

transition element

A transition element is a d-block element that forms at least one ion with a partially filled d sub-level.

Part 1 done

2

Part 2 of 5: Ligands bond to a central ion in complex ions

A metal ion in solution does not float alone. It attracts molecules or ions that crowd around it. The result is a complex ion. Each ligand donates a lone pair of electrons to the central metal ion, forming a coordinate bond.

The coordination number counts the coordinate bonds to the central ion. Six small ligands, such as water or ammonia, give an octahedral shape with 90° bond angles. Four larger ligands, such as chloride ions, usually give a tetrahedral shape, as in [CuCl4]2−\mathrm{[CuCl_4]^{2-}}[CuCl4​]2−. Some complexes are square planar, such as cisplatin, and a few are linear.

Figure 1. Six water ligands surround the central copper ion, and each is joined to it by one coordinate bond.

Exam tip

The charge on a complex is the metal ion charge plus the ligand charges. For [CuCl4]2−\mathrm{[CuCl_4]^{2-}}[CuCl4​]2− the sum is (+2)+4×(−1)=−2(+2)+4\times(-1)=-2(+2)+4×(−1)=−2.

Key terms · tap one for its definition

complex ion

A complex ion consists of a central metal ion bonded to ligands by coordinate bonds, carrying the sum of their charges.

ligand

A ligand donates an electron pair to a central metal atom or ion.

coordination number

The coordination number of a complex is the number of coordinate bonds to its central metal ion, which is not always the number of ligands.

Part 2 done

Quick check

One question on the part you just read

Easy

State what is meant by a transition element.
Show answer and explanation

Answer: B · Worked explanation

A transition element is a d-block element with at least one ion that has a partially filled d sub-level. A full d sub-level describes zinc, which forms only Zn2+\mathrm{Zn^{2+}}Zn2+ and is therefore excluded. Calling every d-block metal a transition element ignores this condition, and colour alone is not the definition.
3

Part 3 of 5: Split d orbitals absorb part of visible light

Copper(II) sulfate solution is blue, and many other complex ions are vividly coloured. The cause lies in the d orbitals. Ligands split the five d orbitals into two energy levels, which is called d-orbital splitting.

An electron can absorb light and move to the higher level. The energy gap, ΔE\Delta EΔE, matches the frequency absorbed: ΔE=hν\Delta E=h\nuΔE=hν. Here hhh is the Planck constant and ν\nuν is the frequency of the light.

The solution shows the colour of the light that is not absorbed. A new metal ion, oxidation state, ligand or coordination number changes ΔE\Delta EΔE and so changes the colour. Ions with a full or empty d sub-level, such as Zn2+\mathrm{Zn^{2+}}Zn2+, are colourless.

Worked example

Energy gap from absorbed light

A complex absorbs light of frequency 4.50×1014 s−14.50\times10^{14}\,\mathrm{s^{-1}}4.50×1014s−1. Calculate ΔE\Delta EΔE using h=6.63×10−34 J sh=6.63\times10^{-34}\,\mathrm{J\,s}h=6.63×10−34Js.
  1. 1
    Energy gap = Planck constant × frequency, so ΔE=hν\Delta E=h\nuΔE=hν.
  2. 2
    Substitute: ΔE=6.63×10−34 J s×4.50×1014 s−1\Delta E=6.63\times10^{-34}\,\mathrm{J\,s}\times4.50\times10^{14}\,\mathrm{s^{-1}}ΔE=6.63×10−34Js×4.50×1014s−1.
  3. 3
    Multiply the numbers: 6.63×4.50=29.86.63\times4.50=29.86.63×4.50=29.8, so ΔE=29.8×10−20 J\Delta E=29.8\times10^{-20}\,\mathrm{J}ΔE=29.8×10−20J.

Answer: ΔE≈2.98×10−19 J\Delta E\approx2.98\times10^{-19}\,\mathrm{J}ΔE≈2.98×10−19J

Exam tip

Explain colour in three steps: ligands split the d orbitals, an electron absorbs a frequency that matches ΔE\Delta EΔE, and the remaining light is transmitted.

Key term

d-orbital splitting

The d-orbital splitting is the separation of the d orbitals of a metal ion into two energy levels by the electric field of its ligands.

Part 3 done

4

Part 4 of 5: Multidentate ligands form more stable chelate complexes

So far each ligand has formed one coordinate bond. Ligands that bond through two or more atoms are multidentate. A bidentate ligand uses two atoms, as in 1,2-diaminoethane, written en. Bonding of this kind is chelation. The EDTA ion is hexadentate, so it bonds through six atoms.

Ligands and their donor atoms

LigandFormulaDonor atoms
waterH2O\mathrm{H_2O}H2​O1
ammoniaNH3\mathrm{NH_3}NH3​1
chloride ionCl−\mathrm{Cl^-}Cl−1
1,2-diaminoethaneH2NCH2CH2NH2\mathrm{H_2NCH_2CH_2NH_2}H2​NCH2​CH2​NH2​2
ethanedioate ionC2O42−\mathrm{C_2O_4^{2-}}C2​O42−​2
EDTA ionEDTA4−\mathrm{EDTA^{4-}}EDTA4−6
Ligand
water
Formula
H2O\mathrm{H_2O}H2​O
Donor atoms
1
Ligand
ammonia
Formula
NH3\mathrm{NH_3}NH3​
Donor atoms
1
Ligand
chloride ion
Formula
Cl−\mathrm{Cl^-}Cl−
Donor atoms
1
Ligand
1,2-diaminoethane
Formula
H2NCH2CH2NH2\mathrm{H_2NCH_2CH_2NH_2}H2​NCH2​CH2​NH2​
Donor atoms
2
Ligand
ethanedioate ion
Formula
C2O42−\mathrm{C_2O_4^{2-}}C2​O42−​
Donor atoms
2
Ligand
EDTA ion
Formula
EDTA4−\mathrm{EDTA^{4-}}EDTA4−
Donor atoms
6

Chelates are often more stable than complexes of single-bonded ligands. This is the chelate effect. Replacing monodentate ligands with a multidentate ligand frees more particles, so entropy, a measure of disorder, rises: [Ni(H2O)6]2+(aq)+3en(aq)⇌[Ni(en)3]2+(aq)+6H2O(l)\mathrm{[Ni(H_2O)_6]^{2+}(aq)+3en(aq)\rightleftharpoons[Ni(en)_3]^{2+}(aq)+6H_2O(l)}[Ni(H2​O)6​]2+(aq)+3en(aq)⇌[Ni(en)3​]2+(aq)+6H2​O(l). Four particles become seven.

Go deeperHaem and carbon monoxide

In haemoglobin, each haem group holds an iron(II) ion inside a multidentate ligand ring. Oxygen binds as a sixth ligand and can leave again.

Carbon monoxide binds to the iron more strongly than oxygen does. It is not easily replaced, so it blocks oxygen transport and is toxic.

Key terms · tap one for its definition

bidentate ligand

A bidentate ligand forms two coordinate bonds with one metal ion, one from each of two donor atoms.

chelation

Chelation is the bonding of a multidentate ligand to a metal ion through two or more donor atoms, forming a ring.

chelate effect

The chelate effect is the extra stability of complexes with multidentate ligands, caused mainly by the rise in entropy on substitution.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the observation when sodium hydroxide solution is added dropwise to aqueous copper(II) ions.
Show answer and explanation

Answer: D · Worked explanation

Hydroxide ions remove protons from water ligands and give the neutral complex [Cu(H2O)4(OH)2]\mathrm{[Cu(H_2O)_4(OH)_2]}[Cu(H2​O)4​(OH)2​], an insoluble blue solid. A deep blue solution needs ammonia as a new ligand, and yellow-green comes from chloride ligands in concentrated hydrochloric acid. No gas is released, since hydroxide ions only remove protons from the ligands.
5

Part 5 of 5: Ligand substitution changes colour and sometimes coordination number

Complex ions are not fixed. In ligand substitution, new ligands replace some or all of the old ones. Water and ammonia are similar in size, so swapping them keeps the coordination number at six: [Cu(H2O)6]2+(aq)+4NH3(aq)⇌[Cu(NH3)4(H2O)2]2+(aq)+4H2O(l)\mathrm{[Cu(H_2O)_6]^{2+}(aq)+4NH_3(aq)\rightleftharpoons[Cu(NH_3)_4(H_2O)_2]^{2+}(aq)+4H_2O(l)}[Cu(H2​O)6​]2+(aq)+4NH3​(aq)⇌[Cu(NH3​)4​(H2​O)2​]2+(aq)+4H2​O(l).

Chloride ions are larger. Concentrated hydrochloric acid supplies them, and four replace six water ligands: [Cu(H2O)6]2+(aq)+4Cl−(aq)⇌[CuCl4]2−(aq)+6H2O(l)\mathrm{[Cu(H_2O)_6]^{2+}(aq)+4Cl^-(aq)\rightleftharpoons[CuCl_4]^{2-}(aq)+6H_2O(l)}[Cu(H2​O)6​]2+(aq)+4Cl−(aq)⇌[CuCl4​]2−(aq)+6H2​O(l).

Three copper(II) complexes

ComplexColourCoordination number
[Cu(H2O)6]2+\mathrm{[Cu(H_2O)_6]^{2+}}[Cu(H2​O)6​]2+blue6
[Cu(NH3)4(H2O)2]2+\mathrm{[Cu(NH_3)_4(H_2O)_2]^{2+}}[Cu(NH3​)4​(H2​O)2​]2+deep blue6
[CuCl4]2−\mathrm{[CuCl_4]^{2-}}[CuCl4​]2−yellow-green4
Complex
[Cu(H2O)6]2+\mathrm{[Cu(H_2O)_6]^{2+}}[Cu(H2​O)6​]2+
Colour
blue
Coordination number
6
Complex
[Cu(NH3)4(H2O)2]2+\mathrm{[Cu(NH_3)_4(H_2O)_2]^{2+}}[Cu(NH3​)4​(H2​O)2​]2+
Colour
deep blue
Coordination number
6
Complex
[CuCl4]2−\mathrm{[CuCl_4]^{2-}}[CuCl4​]2−
Colour
yellow-green
Coordination number
4

Hydroxide ions act differently. They remove protons from water ligands and give a neutral complex, which forms a blue precipitate: [Cu(H2O)6]2+(aq)+2OH−(aq)→[Cu(H2O)4(OH)2](s)+2H2O(l)\mathrm{[Cu(H_2O)_6]^{2+}(aq)+2OH^-(aq)\rightarrow[Cu(H_2O)_4(OH)_2](s)+2H_2O(l)}[Cu(H2​O)6​]2+(aq)+2OH−(aq)→[Cu(H2​O)4​(OH)2​](s)+2H2​O(l).

Common mistake

Ligand substitution does not change the oxidation state of the metal. Copper stays at +2 in every complex above.

Key term

ligand substitution

Ligand substitution is a reaction in which one or more ligands in a complex ion are replaced by different ligands.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[3 marks]

    State three characteristic properties of transition elements.

    Show mark schemeHide mark scheme

    Model answer

    Transition elements form coloured compounds, show variable oxidation states and act as catalysts. They also form complex ions.

    • 1 mark for stating that they form coloured compounds or ions
    • 1 mark for stating that they show variable oxidation states
    • 1 mark for stating that they act as catalysts
    • 1 mark for stating that they form complex ions
  2. 2.State[2 marks]

    State what is meant by the coordination number of a complex ion, and give the coordination number of [CuCl4]2−\mathrm{[CuCl_4]^{2-}}[CuCl4​]2−.

    Show mark schemeHide mark scheme

    Model answer

    It is the number of coordinate bonds from ligands to the central metal ion. For [CuCl4]2−\mathrm{[CuCl_4]^{2-}}[CuCl4​]2− it is 4.

    • 1 mark for stating that it is the number of coordinate bonds to the central metal ion
    • 1 mark for giving 4 for the chloro complex
  3. 3.Explain[3 marks]

    Explain why aqueous copper(II) ions are coloured.

    Show mark schemeHide mark scheme

    Model answer

    The ligands split the d orbitals into two energy levels. An electron absorbs light of a frequency matching ΔE=hν\Delta E=h\nuΔE=hν to move to the higher level. The light not absorbed is transmitted, giving the colour seen.

    • 1 mark for stating that ligands split the d orbitals into two energy levels
    • 1 mark for explaining that an electron absorbs light with frequency matching ΔE=hν\Delta E=h\nuΔE=hν
    • 1 mark for stating that the transmitted light gives the colour seen
  4. 4.Calculate[2 marks]

    Calculate the energy gap ΔE\Delta EΔE for a complex that absorbs light of frequency 6.40×1014 s−16.40\times10^{14}\,\mathrm{s^{-1}}6.40×1014s−1. Use h=6.63×10−34 J sh=6.63\times10^{-34}\,\mathrm{J\,s}h=6.63×10−34Js.

    Show mark schemeHide mark scheme

    Model answer

    ΔE=hν=6.63×10−34 J s×6.40×1014 s−1=4.24×10−19 J\Delta E=h\nu=6.63\times10^{-34}\,\mathrm{J\,s}\times6.40\times10^{14}\,\mathrm{s^{-1}}=4.24\times10^{-19}\,\mathrm{J}ΔE=hν=6.63×10−34Js×6.40×1014s−1=4.24×10−19J.

    • 1 mark for substituting into ΔE=hν\Delta E=h\nuΔE=hν
    • 1 mark for obtaining 4.24×10−19 J4.24\times10^{-19}\,\mathrm{J}4.24×10−19J
  5. 5.Suggest[3 marks]

    Suggest why EDTA4−\mathrm{EDTA^{4-}}EDTA4− forms a more stable complex with a metal ion than six water ligands do.

    Show mark schemeHide mark scheme

    Model answer

    One EDTA ion has six donor atoms, so it can replace six water ligands. Two particles then form seven, because six water molecules are released. The rise in the number of particles increases entropy.

    • 1 mark for stating that EDTA has six donor atoms and can replace six water ligands
    • 1 mark for stating that the number of free particles increases
    • 1 mark for linking the rise in particles to an increase in entropy, the chelate effect
  6. 6.Describe[2 marks]

    Describe what you would see when concentrated hydrochloric acid is added to aqueous copper(II) ions, and name the type of reaction.

    Show mark schemeHide mark scheme

    Model answer

    The blue solution turns yellow-green. The reaction is ligand substitution.

    • 1 mark for stating the colour change from blue to yellow-green
    • 1 mark for naming the reaction as ligand substitution

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the bidentate ligand.
Show answer and explanation

Answer: C · Worked explanation

1,2-Diaminoethane has a nitrogen atom at each end of the molecule, and each donates an electron pair to the same metal ion. Ammonia, water and chloride ions each have only one donor atom, so each is monodentate. The word bidentate refers to the number of donor atoms, not to the number of molecules.
4.

Medium·Determine[1 mark]

Determine the oxidation state of chromium in [Cr(H2O)4Cl2]+\mathrm{[Cr(H_2O)_4Cl_2]^+}[Cr(H2​O)4​Cl2​]+.
Show answer and explanation

Answer: B · Worked explanation

Water is neutral and each chloride ligand is 1−. The oxidation state xxx satisfies x+0+2(−1)=+1x+0+2(-1)=+1x+0+2(−1)=+1, so x=+3x=+3x=+3. An answer of +1 copies the overall charge of the complex and ignores the charges on the ligands. Adding back confirms the result: +3+2(−1)=+1+3+2(-1)=+1+3+2(−1)=+1, which matches the complex charge.
5.

Medium·Identify[1 mark]

Identify the reaction in which the coordination number of the metal changes.
Show answer and explanation

Answer: C · Worked explanation

Six water ligands are replaced by four larger chloride ions, so the coordination number falls from six to four. In the other reactions six coordinate bonds remain. Even the en reaction keeps six, because each of the three bidentate ligands forms two bonds.
6.

Medium·Calculate[2 marks]

Calculate the energy gap for a complex that absorbs light of frequency 5.20×1014 s−15.20\times10^{14}\,\mathrm{s^{-1}}5.20×1014s−1. Use h=6.63×10−34 J sh=6.63\times10^{-34}\,\mathrm{J\,s}h=6.63×10−34Js.
Show answer and explanation

Answer: D · Worked explanation

ΔE=hν=6.63×10−34 J s×5.20×1014 s−1=3.45×10−19 J\Delta E=h\nu=6.63\times10^{-34}\,\mathrm{J\,s}\times5.20\times10^{14}\,\mathrm{s^{-1}}=3.45\times10^{-19}\,\mathrm{J}ΔE=hν=6.63×10−34Js×5.20×1014s−1=3.45×10−19J. Dividing hhh by ν\nuν gives 1.28×10−48 J1.28\times10^{-48}\,\mathrm{J}1.28×10−48J, which uses the wrong relationship. The value 3.45×10−20 J3.45\times10^{-20}\,\mathrm{J}3.45×10−20J comes from a slip in the power of ten. The units combine as J s×s−1=J\mathrm{J\,s\times s^{-1}=J}Js×s−1=J, so the answer is an energy in joules. Always show the unit with the answer.
7.

Medium·Explain[1 mark]

Explain why aqueous zinc ions, [Zn(H2O)6]2+\mathrm{[Zn(H_2O)_6]^{2+}}[Zn(H2​O)6​]2+, are colourless.
Show answer and explanation

Answer: A · Worked explanation

In Zn2+\mathrm{Zn^{2+}}Zn2+ the d sub-level is full, so there is no vacant d level to receive an electron and no visible light is absorbed. An empty d sub-level describes Sc3+\mathrm{Sc^{3+}}Sc3+, not zinc. Absorbing every frequency would make a solution look black, not colourless.
8.

Hard·Explain[2 marks]

Explain why replacing six ammonia ligands in [Ni(NH3)6]2+\mathrm{[Ni(NH_3)_6]^{2+}}[Ni(NH3​)6​]2+ with three 1,2-diaminoethane (en) molecules is favourable.
Show answer and explanation

Answer: A · Worked explanation

One complex ion and three en molecules (four particles) form one complex ion and six ammonia molecules (seven particles). The rise in particle number increases entropy, which is the chelate effect. The coordination number stays at six because three bidentate ligands form six bonds, so a rise to nine is wrong.
9.

Hard·Explain[2 marks]

Concentrated hydrochloric acid turns aqueous copper(II) ions from blue to yellow-green. Explain the change in shape and coordination number.
Show answer and explanation

Answer: B · Worked explanation

Chloride ions are larger than water molecules, so only four fit around the copper ion. Six water ligands are replaced by four chloride ligands, giving [CuCl4]2−\mathrm{[CuCl_4]^{2-}}[CuCl4​]2−. Copper stays at +2 because ligand substitution does not change oxidation state, so a reduction to +1 is wrong.
10.

Hard·Determine[2 marks]

A complex contains an iron(III) ion and three ethanedioate ions, C2O42−\mathrm{C_2O_4^{2-}}C2​O42−​, each acting as a bidentate ligand. Determine the charge on the complex and its coordination number.
Show answer and explanation

Answer: C · Worked explanation

The charge is (+3)+3×(−2)=−3(+3)+3\times(-2)=-3(+3)+3×(−2)=−3. Each bidentate ligand forms two coordinate bonds, so three ligands give a coordination number of six. A coordination number of three counts ligands instead of bonds, and a positive charge ignores the charges on the ligands.

Keep going

Next topic3.2.6 Ions in aqueous solutionPrevious topic3.2.4 Period 3 elements and oxides

More in Section 3.2 · Inorganic chemistry

  1. 3.2.1PeriodicityNotes · 10 questions
  2. 3.2.2Group 2Notes · 10 questions
  3. 3.2.3Group 7, the halogensNotes · 10 questions
  4. 3.2.4Period 3 elements and oxidesNotes · 10 questions
  5. 3.2.5Transition metalsNotes · 10 questions
  6. 3.2.6Ions in aqueous solutionNotes · 10 questions

All AQA A-level Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1Transition metals have partly filled d sub-levels
  2. 2Ligands bond to a central ion in complex ions
  3. 3Split d orbitals absorb part of visible light
  4. 4Multidentate ligands form more stable chelate complexes
  5. 5Ligand substitution changes colour and sometimes coordination number
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe