Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Chemistry
  3. ›3.3 Organic chemistry
  4. ›3.3.10 Aromatic chemistry

AQA A-level Chemistry · Section 3.3 · Organic chemistry

3.3.10 Aromatic chemistry

Describe the structure and bonding of benzene, explain electrophilic substitution, draw nitration and acylation mechanisms, and compare benzene with alkenes.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Benzene is a planar ring with delocalised electrons
  1. 1Benzene is a planar ring with delocalised electrons
  2. 2Hydrogenation data show benzene is more stable than expected
  3. 3Benzene reacts by substitution while alkenes react by addition
  4. 4Nitration adds a nitro group through a nitronium ion
  5. 5Friedel–Crafts acylation joins an acyl group to the ring
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Benzene is a planar ring with delocalised electrons

Benzene has the formula C6H6\mathrm{C_6H_6}C6​H6​ and is the simplest arene, a hydrocarbon containing a benzene ring. Its six carbon atoms form a flat hexagon. Every bond angle is 120∘120^{\circ}120∘.

Each carbon forms three σ\sigmaσ bonds, to two carbons and one hydrogen. The fourth outer electron sits in a p orbital. These six p orbitals overlap sideways above and below the ring, forming a ring of six delocalised electrons.

Figure 1. The Kekulé drawing shows alternating bonds. The circle shows six delocalised electrons shared equally around the ring.

As a result, all six carbon–carbon bonds have the same length. That length lies between a single bond and a double bond.

Common mistake

Benzene does not switch between double and single bonds. All six bonds are identical, and the ring of electrons is shared evenly.

Key terms · tap one for its definition

arene

An arene is a hydrocarbon whose molecules contain one or more benzene rings.

delocalised electrons

Delocalised electrons are electrons shared over three or more atoms, not held between just two atoms.

Part 1 done

2

Part 2 of 5: Hydrogenation data show benzene is more stable than expected

Early chemists proposed the Kekulé structure, with alternating double and single bonds. This structure predicts that benzene should behave like three separate double bonds.

The enthalpy of hydrogenation measures the energy released when a compound reacts with hydrogen. Cyclohexene has one double bond and gives −120 kJ mol−1-120\,\mathrm{kJ\,mol^{-1}}−120kJmol−1. Three double bonds would give about three times as much. A more stable compound releases less energy, because it starts at a lower energy.

Worked example

Comparing hydrogenation enthalpies

Cyclohexene has ΔH=−120 kJ mol−1\Delta H=-120\,\mathrm{kJ\,mol^{-1}}ΔH=−120kJmol−1 for hydrogenation. Benzene has ΔH=−208 kJ mol−1\Delta H=-208\,\mathrm{kJ\,mol^{-1}}ΔH=−208kJmol−1. Calculate how much more stable benzene is than the Kekulé structure predicts.
  1. 1
    Predicted value for three double bonds: 3×(−120 kJ mol−1)=−360 kJ mol−13\times(-120\,\mathrm{kJ\,mol^{-1}})=-360\,\mathrm{kJ\,mol^{-1}}3×(−120kJmol−1)=−360kJmol−1.
  2. 2
    Measured value for benzene: −208 kJ mol−1-208\,\mathrm{kJ\,mol^{-1}}−208kJmol−1.
  3. 3
    Difference, measured minus predicted: −208−(−360)=+152 kJ mol−1-208-(-360)=+152\,\mathrm{kJ\,mol^{-1}}−208−(−360)=+152kJmol−1.

Answer: Benzene is 152 kJ mol−1152\,\mathrm{kJ\,mol^{-1}}152kJmol−1 more stable than the Kekulé structure predicts.

The extra stability comes from delocalisation. The Kekulé structure also cannot explain why all the bonds are equal in length.

Key term

enthalpy of hydrogenation

The enthalpy of hydrogenation is the enthalpy change, in kJ mol−1\mathrm{kJ\,mol^{-1}}kJmol−1, when one mole of an unsaturated compound is fully hydrogenated.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the carbon–carbon–carbon bond angle in the benzene ring.
Show answer and explanation

Answer: B · Worked explanation

The benzene ring is a planar hexagon, and each carbon bonds to three atoms in a flat arrangement, so the angle is 120∘120^{\circ}120∘. The angle 109.5∘109.5^{\circ}109.5∘ belongs to a tetrahedral carbon with four single bonds, which is not the case here.
3

Part 3 of 5: Benzene reacts by substitution while alkenes react by addition

Because benzene is unusually stable, its reactions differ from those of alkenes. An alkene has a localised region of high electron density in its C=C\mathrm{C=C}C=C bond. An electrophile is strongly attracted to it, so addition occurs and bromine water is decolourised.

In benzene, the electrons are spread over six carbons. The electron density between any two atoms is therefore lower, and benzene does not decolourise bromine water. Addition would also destroy the delocalised ring.

Alkenes compared with benzene

FeatureAlkenesBenzene
Electron densityHigh and localisedLower, spread over ring
Bromine waterDecolourisedNo change
Typical reactionElectrophilic additionElectrophilic substitution
Feature
Electron density
Alkenes
High and localised
Benzene
Lower, spread over ring
Feature
Bromine water
Alkenes
Decolourised
Benzene
No change
Feature
Typical reaction
Alkenes
Electrophilic addition
Benzene
Electrophilic substitution

Instead, benzene undergoes electrophilic substitution. This keeps the delocalised ring in the product.

Exam tip

Say that benzene’s electron density is spread over the whole ring. Do not say that it has no electron density between carbons.

Key terms · tap one for its definition

electrophile

An electrophile is a species that accepts a pair of electrons to form a covalent bond, often a positive ion.

electrophilic substitution

Electrophilic substitution is a reaction in which an electrophile replaces an atom, usually hydrogen, on a ring.

Part 3 done

4

Part 4 of 5: Nitration adds a nitro group through a nitronium ion

Nitration needs a strong electrophile. A mixture of concentrated nitric acid and concentrated sulfuric acid forms it. The sulfuric acid protonates nitric acid, which then loses water to give the nitronium ion, NO2+\mathrm{NO_2^+}NO2+​.

HNO3(l)+H2SO4(l)→NO2++HSO4−+H2O(l)\mathrm{HNO_3(l) + H_2SO_4(l) \rightarrow NO_2^+ + HSO_4^- + H_2O(l)}HNO3​(l)+H2​SO4​(l)→NO2+​+HSO4−​+H2​O(l)

  • The delocalised ring donates a pair of electrons to NO2+\mathrm{NO_2^+}NO2+​, forming a bond to one carbon.
  • The result is a positively charged intermediate, with delocalisation partly lost.
  • The C−H\mathrm{C{-}H}C−H bond breaks, its electrons return to the ring, and H+\mathrm{H^+}H+ leaves.
  • The H+\mathrm{H^+}H+ combines with HSO4−\mathrm{HSO_4^-}HSO4−​, re-forming H2SO4\mathrm{H_2SO_4}H2​SO4​.

Overall: C6H6(l)+HNO3(l)→C6H5NO2(l)+H2O(l)\mathrm{C_6H_6(l) + HNO_3(l) \rightarrow C_6H_5NO_2(l) + H_2O(l)}C6​H6​(l)+HNO3​(l)→C6​H5​NO2​(l)+H2​O(l), giving nitrobenzene.

Exam tip

Quote the condition: concentrated acids at no more than 50 °C. Hotter mixtures give products with more than one nitro group.

Key term

nitronium ion

The nitronium ion is the cation NO2+\mathrm{NO_2^+}NO2+​, the electrophile that attacks benzene in nitration.

Part 4 done

Quick check

One question on the part you just read

Easy

State the number of delocalised electrons in the ring of one benzene molecule.
Show answer and explanation

Answer: D · Worked explanation

Each of the six carbon atoms donates one electron from its p orbital to the shared ring, giving six delocalised electrons. A count of 3 comes from counting only the double bonds in the Kekulé drawing. Twelve counts every electron in the three Kekulé double bonds, including the σ\sigmaσ pairs, which are not delocalised.
5

Part 5 of 5: Friedel–Crafts acylation joins an acyl group to the ring

Nitration attaches a nitrogen-containing group. Friedel–Crafts acylation instead attaches an acyl group, forming a new carbon–carbon bond. The reagents are an acyl chloride, RCOCl\mathrm{RCOCl}RCOCl, and anhydrous aluminium chloride, AlCl3\mathrm{AlCl_3}AlCl3​, heated under reflux.

The aluminium chloride removes chloride from the acyl chloride. This forms the acylium ion, RCO+\mathrm{RCO^+}RCO+, which is the electrophile.

CH3COCl(l)+AlCl3(s)→CH3CO++AlCl4−\mathrm{CH_3COCl(l) + AlCl_3(s) \rightarrow CH_3CO^+ + AlCl_4^-}CH3​COCl(l)+AlCl3​(s)→CH3​CO++AlCl4−​

The mechanism then matches that of nitration. The ring attacks the acylium ion, an intermediate forms, and H+\mathrm{H^+}H+ leaves. The H+\mathrm{H^+}H+ reacts with AlCl4−\mathrm{AlCl_4^-}AlCl4−​ to re-form AlCl3\mathrm{AlCl_3}AlCl3​ and give hydrogen chloride.

With ethanoyl chloride, the organic product is phenylethanone, C6H5COCH3\mathrm{C_6H_5COCH_3}C6​H5​COCH3​. It is a ketone, so its carbonyl carbon is bonded to two carbon groups.

Common mistake

Aluminium chloride is regenerated at the end, so it is a catalyst. It does not appear in the overall equation.

Key terms · tap one for its definition

Friedel–Crafts acylation

Friedel–Crafts acylation is the electrophilic substitution of an arene by an acyl chloride, with aluminium chloride as catalyst, forming an aromatic ketone.

acylium ion

An acylium ion is the cation RCO+\mathrm{RCO^+}RCO+ formed when an acyl chloride reacts with aluminium chloride.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe the bonding and shape of the benzene molecule.

    Show mark schemeHide mark scheme

    Model answer

    The molecule is a planar hexagon with bond angles of 120∘120^{\circ}120∘. Each carbon forms three σ\sigmaσ bonds. The fourth electrons in p orbitals overlap sideways to form a ring of delocalised electrons, so all six carbon–carbon bonds are equal in length.

    • 1 mark for stating that the ring is planar with 120∘120^{\circ}120∘ bond angles
    • 1 mark for stating that the p orbitals overlap sideways to form a ring of delocalised electrons above and below the plane
    • 1 mark for stating that all six carbon–carbon bonds are equal in length, between single and double
  2. 2.Calculate[2 marks]

    Cyclohexene has ΔH=−120 kJ mol−1\Delta H=-120\,\mathrm{kJ\,mol^{-1}}ΔH=−120kJmol−1 for hydrogenation, and benzene has ΔH=−208 kJ mol−1\Delta H=-208\,\mathrm{kJ\,mol^{-1}}ΔH=−208kJmol−1. Calculate how much more stable benzene is than the Kekulé structure predicts.

    Show mark schemeHide mark scheme

    Model answer

    Predicted value is 3×(−120)=−360 kJ mol−13\times(-120)=-360\,\mathrm{kJ\,mol^{-1}}3×(−120)=−360kJmol−1. The difference is −208−(−360)=+152 kJ mol−1-208-(-360)=+152\,\mathrm{kJ\,mol^{-1}}−208−(−360)=+152kJmol−1, so benzene is 152 kJ mol−1152\,\mathrm{kJ\,mol^{-1}}152kJmol−1 more stable.

    • 1 mark for calculating the predicted value as −360 kJ mol−1-360\,\mathrm{kJ\,mol^{-1}}−360kJmol−1
    • 1 mark for obtaining a difference of 152 kJ mol−1152\,\mathrm{kJ\,mol^{-1}}152kJmol−1 with the correct unit
  3. 3.Explain[2 marks]

    Explain why benzene undergoes substitution reactions rather than addition reactions.

    Show mark schemeHide mark scheme

    Model answer

    Addition would break the delocalised ring and lose its extra stability. Substitution keeps the delocalised ring in the product.

    • 1 mark for stating that addition would destroy the delocalised ring
    • 1 mark for stating that substitution keeps the stable delocalised ring
  4. 4.Compare[3 marks]

    Compare the reactions of cyclohexene and benzene with bromine water.

    Show mark schemeHide mark scheme

    Model answer

    Cyclohexene decolourises bromine water, but benzene does not react. In cyclohexene the electron density in the C=C\mathrm{C=C}C=C bond is high and localised. In benzene the electron density is spread over the ring and is lower between any two carbons.

    • 1 mark for stating that cyclohexene decolourises bromine water and benzene does not
    • 1 mark for stating that the electron density in the C=C bond is high and localised
    • 1 mark for stating that in benzene the electron density is spread out and lower
  5. 5.State[3 marks]

    State the reagents and the temperature limit used to nitrate benzene, and give the formula of the electrophile.

    Show mark schemeHide mark scheme

    Model answer

    The reagents are concentrated nitric acid and concentrated sulfuric acid, kept at no more than 50 °C. The electrophile is NO2+\mathrm{NO_2^+}NO2+​.

    • 1 mark for stating concentrated nitric acid and concentrated sulfuric acid
    • 1 mark for stating a temperature of no more than 50 °C
    • 1 mark for giving the electrophile as NO2+\mathrm{NO_2^+}NO2+​
  6. 6.Suggest[2 marks]

    Suggest the role of aluminium chloride in the acylation of benzene.

    Show mark schemeHide mark scheme

    Model answer

    It reacts with the acyl chloride to form the acylium ion, which is the electrophile. It is regenerated at the end, so it is a catalyst.

    • 1 mark for stating that it helps form the acylium ion electrophile from the acyl chloride
    • 1 mark for stating that it is regenerated, so it acts as a catalyst

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the typical reaction type of benzene.
Show answer and explanation

Answer: A · Worked explanation

The electron-rich ring attracts electrophiles, and a hydrogen atom is replaced so that the delocalised ring remains. Electrophilic addition is the typical reaction of alkenes, which lack the stabilising delocalised ring. Nucleophilic reactions are not typical, because nucleophiles are repelled by the electron-rich ring and are not attracted to it.
4.

Medium·Identify[1 mark]

Identify the observation that supports the delocalised model of benzene over the Kekulé structure.
Show answer and explanation

Answer: C · Worked explanation

The Kekulé structure predicts alternating long and short bonds, but measured bonds are all equal in length, which fits delocalisation. The formula, the smoky flame and the physical state are consistent with either model, so they cannot tell the two apart.
5.

Medium·Calculate[1 mark]

Hydrogenating cyclohexene releases 120 kJ mol−1120\,\mathrm{kJ\,mol^{-1}}120kJmol−1 and hydrogenating benzene releases 208 kJ mol−1208\,\mathrm{kJ\,mol^{-1}}208kJmol−1. Calculate how much more stable benzene is than the Kekulé structure predicts.
Show answer and explanation

Answer: C · Worked explanation

The Kekulé structure has three double bonds, so the predicted energy release is 3×120=360 kJ mol−13\times120=360\,\mathrm{kJ\,mol^{-1}}3×120=360kJmol−1. The measured release is 208 kJ mol−1208\,\mathrm{kJ\,mol^{-1}}208kJmol−1, so the difference is 360−208=152 kJ mol−1360-208=152\,\mathrm{kJ\,mol^{-1}}360−208=152kJmol−1. A value of 88 comes from subtracting 120 from 208, which compares benzene with only one double bond.
6.

Medium·Identify[1 mark]

Identify the conditions for nitrating benzene to make nitrobenzene.
Show answer and explanation

Answer: A · Worked explanation

A strong electrophile, NO2+\mathrm{NO_2^+}NO2+​, is needed, and it forms only when concentrated nitric acid reacts with concentrated sulfuric acid. The temperature is held below 50 °C to avoid more than one substitution. Aluminium chloride is used in acylation, not in nitration.
7.

Medium·Identify[1 mark]

Identify the organic product when benzene reacts with ethanoyl chloride in the presence of aluminium chloride.
Show answer and explanation

Answer: D · Worked explanation

Friedel–Crafts acylation replaces a hydrogen atom of the ring with the acyl group CH3CO−\mathrm{CH_3CO{-}}CH3​CO−, giving the ketone phenylethanone. Ethylbenzene would contain an −CH2CH3\mathrm{{-}CH_2CH_3}−CH2​CH3​ group, with no carbonyl group. Chlorobenzene and nitrobenzene would need different electrophiles, so neither can form from an acyl chloride and aluminium chloride.
8.

Hard·Identify[2 marks]

In the nitration of benzene, identify the species that removes H+\mathrm{H^+}H+ from the intermediate and the catalyst that is re-formed.
Show answer and explanation

Answer: B · Worked explanation

The hydrogensulfate ion formed when the nitronium ion is made accepts H+\mathrm{H^+}H+, so sulfuric acid is regenerated and acts as a catalyst. Aluminium chloride and AlCl4−\mathrm{AlCl_4^-}AlCl4−​ belong to acylation. The nitronium ion is the electrophile that attacks the ring, so it cannot also remove H+\mathrm{H^+}H+ from the intermediate.
9.

Hard·Explain[2 marks]

Explain why benzene does not decolourise bromine water.
Show answer and explanation

Answer: C · Worked explanation

The delocalised electrons are shared over the whole ring, so the electron density between any two carbons is lower than in a localised C=C\mathrm{C=C}C=C bond. Benzene therefore does not attract bromine strongly enough to react. It is not true that the ring has no electrons, because it readily reacts with strong electrophiles.
10.

Hard·Explain[2 marks]

A student nitrates benzene at 90 °C and obtains a mixture of products. Explain what has most likely happened.
Show answer and explanation

Answer: A · Worked explanation

Higher temperatures allow a second and third nitro group to replace more hydrogen atoms on the ring, so a mixture forms. Substitution keeps the ring intact, so the ring does not break. Sulfuric acid is regenerated as a catalyst, so it is not used up.

Keep going

Next topic3.3.11 AminesPrevious topic3.3.9 Carboxylic acids and derivatives

More in Section 3.3 · Organic chemistry

  1. 3.3.6Organic analysisNotes · 10 questions
  2. 3.3.7Optical isomerismNotes · 10 questions
  3. 3.3.8Aldehydes and ketonesNotes · 10 questions
  4. 3.3.9Carboxylic acids and derivativesNotes · 10 questions
  5. 3.3.10Aromatic chemistryNotes · 10 questions
  6. 3.3.11AminesNotes · 10 questions
  7. 3.3.12PolymersNotes · 10 questions
  8. 3.3.13Amino acids, proteins and DNANotes · 10 questions
  9. 3.3.14Organic synthesisNotes · 10 questions

All AQA A-level Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1Benzene is a planar ring with delocalised electrons
  2. 2Hydrogenation data show benzene is more stable than expected
  3. 3Benzene reacts by substitution while alkenes react by addition
  4. 4Nitration adds a nitro group through a nitronium ion
  5. 5Friedel–Crafts acylation joins an acyl group to the ring
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe