AQA A-level Chemistry · Section 3.3 · Organic chemistry
3.3.14 Organic synthesis
Plan multi-step synthetic routes, choose reagents and conditions for key reactions, and predict products from reaction schemes.
1/6A synthetic route links compounds through functional group changes
- A synthetic route links compounds through functional group changes
- A few key reactions link alkenes, halogenoalkanes and alcohols
- Oxidation and reduction steps interconvert alcohols and carbonyl compounds
- Nitriles let a route add one carbon atom to the chain
- Aromatic compounds lead to amines through nitration and reduction
- Each step loses product, so overall yield falls quickly
- Check your recall
- Practice: 10 questions
Part 1 of 6: A synthetic route links compounds through functional group changes
Chemists make a target compound by changing one functional group into another. Few targets can be made in one step, so they plan a synthetic route of several steps. Each step needs its own reagent and conditions.
A reaction scheme shows the route. Boxes hold the compounds and arrows carry the reagents and conditions. Work backwards from the target, asking which compound could give it in one step. Each change involves a functional group.
Key terms · tap one for its definition
synthetic route
A synthetic route is a sequence of reactions that converts a starting material into a target compound.
functional group
A functional group is an atom or group of atoms that determines the characteristic reactions of a compound.
Part 2 of 6: A few key reactions link alkenes, halogenoalkanes and alcohols
Some steps are substitutions, where one group replaces another. Others are elimination reactions, where a small molecule such as HBr or water is removed to leave a double bond. The table gathers the main conversions. A halogenoalkane is the most flexible intermediate, because it leads to alcohols, amines and nitriles. Each product can then become the starting material for the next step.
Conversions between alkenes, halogenoalkanes and alcohols
- Conversion
- alkene to halogenoalkane
- Reagent and conditions
- hydrogen bromide at room temperature
- Conversion
- alkene to alcohol
- Reagent and conditions
- steam with a phosphoric acid catalyst
- Conversion
- halogenoalkane to alcohol
- Reagent and conditions
- aqueous sodium hydroxide, heated
- Conversion
- halogenoalkane to amine
- Reagent and conditions
- excess ammonia in ethanol, sealed tube
- Conversion
- alcohol to alkene
- Reagent and conditions
- concentrated sulfuric acid, heated
Key term
elimination
Elimination is a reaction in which a small molecule is removed from a compound to form a double bond.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 3 of 6: Oxidation and reduction steps interconvert alcohols and carbonyl compounds
Alcohols are oxidised using acidified potassium dichromate(VI). The conditions decide the product. Apparatus matters too. Use distillation to collect a product as it forms. Use reflux to heat the mixture with a vertical condenser, so vapours return to the flask. Orange dichromate turns green as it is reduced.
Oxidation of alcohols
- Alcohol
- primary
- Conditions
- distil off the product as it forms
- Product
- aldehyde
- Alcohol
- primary
- Conditions
- excess oxidising agent, reflux
- Product
- carboxylic acid
- Alcohol
- secondary
- Conditions
- heat under reflux
- Product
- ketone
The reverse step uses a reducing agent. Aldehydes and ketones are reduced to alcohols by in aqueous solution. An aldehyde gives a primary alcohol and a ketone gives a secondary alcohol.
Key terms · tap one for its definition
distillation
Distillation is heating a mixture so that a liquid evaporates, then condensing and collecting it separately.
reflux
Reflux is heating a mixture with a condenser fitted vertically, so that vapours condense and return to the flask.
Part 4 of 6: Nitriles let a route add one carbon atom to the chain
Most steps keep the number of carbon atoms the same. Cyanide ions are different. Heating a halogenoalkane with potassium cyanide in ethanol gives a nitrile, so the carbon chain grows by one atom. Bromoethane gives propanenitrile. Choose this step whenever the target has one more carbon than the halogenoalkane available.
A nitrile contains the group, and it can go two ways. Reduction gives a primary amine. hydrolysis, the breaking of bonds by reaction with water, gives a carboxylic acid when heated with dilute acid.
Key term
hydrolysis
Hydrolysis is the breaking of a bond by reaction with water.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 5 of 6: Aromatic compounds lead to amines through nitration and reduction
Benzene is a useful starting point for aromatic products, but it does not react directly with ammonia. Warm it with concentrated nitric and sulfuric acids, keeping the temperature below 55 °C, to form nitrobenzene. This is nitration, the substitution of a hydrogen atom by a nitro group.
Nitrobenzene is then reduced to phenylamine. Heat it under reflux with tin and concentrated hydrochloric acid, then add excess sodium hydroxide. Keeping the temperature low in the first step avoids more than one nitro group joining the ring.
Key term
nitration
Nitration is the substitution of a hydrogen atom on a ring by a nitro group, .
Part 6 of 6: Each step loses product, so overall yield falls quickly
No reaction gives its full theoretical amount, because some product is lost in side reactions and purification. The percentage yield compares the actual and theoretical amounts: .
In a multi-step route, multiply the yields of the steps to find the overall yield.
Worked example
Overall yield of a three-step synthesis
- Write each yield as a fraction: 0.80, 0.70 and 0.60.
- Multiply the fractions: .
- Convert to a percentage: .
Answer: The overall yield is .
Fewer steps give a higher overall yield, so choose the shortest route that works. Purify each product before the next step:
- Liquids: wash in a separating funnel, dry with anhydrous calcium chloride, then redistil.
- Solids: recrystallise, then check the melting point.
Key term
percentage yield
The percentage yield is the actual amount of product divided by the theoretical amount, multiplied by .
Check your recall[16 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Give[2 marks]
Give the reagent and conditions needed to oxidise a primary alcohol to a carboxylic acid.
Show mark schemeHide mark scheme
Model answer
Use acidified potassium dichromate(VI) in excess, and heat under reflux.
- 1 mark for stating acidified potassium dichromate(VI)
- 1 mark for stating excess oxidising agent and heating under reflux
- 2.Describe[4 marks]
Describe a two-step route to convert bromoethane into propylamine.
Show mark schemeHide mark scheme
Model answer
Heat bromoethane with potassium cyanide in ethanol to form propanenitrile. Then reduce the nitrile using LiAlH4 in dry ether, followed by dilute acid, to form propylamine.
- 1 mark for stating potassium cyanide in ethanol, heated
- 1 mark for naming the intermediate as propanenitrile
- 1 mark for stating reduction with LiAlH4 in dry ether (or hydrogen with a nickel catalyst)
- 1 mark for naming the product as propylamine
- 3.Compare[3 marks]
Compare the products when bromoethane is heated with aqueous hydroxide ions and with ethanolic hydroxide ions.
Show mark schemeHide mark scheme
Model answer
Aqueous hydroxide ions give ethanol by substitution. Ethanolic hydroxide ions give ethene by elimination of hydrogen bromide.
- 1 mark for stating that aqueous conditions give an alcohol, ethanol
- 1 mark for stating that aqueous conditions involve substitution
- 1 mark for stating that ethanolic conditions give ethene by elimination
- 4.Calculate[2 marks]
A two-step synthesis has step yields of 75% and 60%. Calculate the overall percentage yield.
Show mark schemeHide mark scheme
Model answer
Overall yield = .
- 1 mark for multiplying the two fractional yields
- 1 mark for giving 45%
- 5.Suggest[2 marks]
Suggest why chemists prefer a synthetic route with fewer steps.
Show mark schemeHide mark scheme
Model answer
Each step loses some product, so fewer steps give a higher overall yield. Fewer steps also need less purification.
- 1 mark for stating that each step loses product
- 1 mark for linking fewer steps to a higher overall yield or less waste
- 6.Describe[3 marks]
Describe how a liquid product is purified after a reaction.
Show mark schemeHide mark scheme
Model answer
Wash the product in a separating funnel. Dry it with an anhydrous drying agent such as calcium chloride. Redistil it and collect the fraction at the boiling point of the product.
- 1 mark for stating washing in a separating funnel
- 1 mark for stating drying with an anhydrous drying agent
- 1 mark for stating redistillation, collecting the fraction at the product’s boiling point

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyIdentify[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumIdentify[1 mark]
Show answer and explanation
Answer: D · Worked explanation
MediumPredict[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: C · Worked explanation
MediumIdentify[1 mark]
Show answer and explanation
Answer: B · Worked explanation
HardPredict[2 marks]
Show answer and explanation
Answer: A · Worked explanation
HardIdentify[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardIdentify[2 marks]
Show answer and explanation
Answer: B · Worked explanation