AQA A-level Chemistry · Section 3.3 · Organic chemistry
3.3.12 Polymers
Describe addition and condensation polymerisation, draw repeating units, explain disposal problems and relate the structure of polyesters and polyamides to their properties.
1/6Addition polymers form when alkene monomers join together
- Addition polymers form when alkene monomers join together
- A repeating unit represents the whole polymer chain
- Condensation polymers lose a small molecule at each link
- Polyesters link their monomers through ester links
- Polyamides have strong hydrogen bonding between chains
- Waste polymers raise problems, and each disposal route has costs
- Check your recall
- Practice: 10 questions
Part 1 of 6: Addition polymers form when alkene monomers join together
Plastic bags and drinks bottles are made of very long chain molecules. Each chain is built from many small molecules joined together. A polymer is a very large molecule made from many repeating units, and each small molecule is a monomer.
In addition polymerisation, alkene monomers open their double bonds and join in a chain. Nothing is lost, so the polymer is the only product. Monomers add to the growing chain one after another. The chain can reach a very large number of units. Ethene gives poly(ethene).
The chemistry is always the same: double bonds open and then join to their neighbours. Only the side groups change from one alkene to another.
Key terms · tap one for its definition
polymer
A polymer is a very large molecule formed by joining many small molecules called monomers.
monomer
A monomer is a small molecule that can join with many others to form a polymer.
addition polymerisation
Addition polymerisation is the joining of unsaturated monomers, such as alkenes, into a polymer with no other product.
Part 2 of 6: A repeating unit represents the whole polymer chain
Chemists draw one repeating unit in square brackets, with the bonds extending through the brackets. The subscript shows that the unit repeats many times. For an addition polymer, the repeating unit has the same atoms as the monomer.
- Draw the carbon–carbon double bond as a single bond.
- Keep the two carbons of the former double bond in the main chain.
- Place any side groups above and below the chain.
- Add open bonds and brackets, with outside.
Propene, , gives poly(propene), with repeating unit . Chloroethene gives poly(chloroethene), also known as PVC.
Key term
repeating unit
A repeating unit is the smallest section of a polymer chain that repeats along its length.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 3 of 6: Condensation polymers lose a small molecule at each link
Some monomers have a functional group at each end. When two of them react, they join and release a small molecule, usually water. Repeating this builds a chain by condensation polymerisation.
A dicarboxylic acid has a carboxyl group at both ends of its chain. A diol has two hydroxyl groups, and a diamine has two amine groups. Different pairs of these monomers give different polymers.
- Polyester: a dicarboxylic acid and a diol
- Polyamide: a dicarboxylic acid and a diamine
Key terms · tap one for its definition
condensation polymerisation
Condensation polymerisation is the joining of monomers into a polymer with the loss of a small molecule at each link.
dicarboxylic acid
A dicarboxylic acid is a compound with a carboxyl group at each end of its carbon chain.
Part 4 of 6: Polyesters link their monomers through ester links
Now look at a diol reacting with a dicarboxylic acid. Each hydroxyl group reacts with a carboxyl group, losing water and forming an ester link, . The chain grows from both ends.
Poly(ethylene terephthalate), known as PET, forms from ethane-1,2-diol and benzene-1,4-dicarboxylic acid. Its repeating unit is . PET is used for drinks bottles and fibres.
Ester links are polar and can be hydrolysed, meaning broken by reaction with water. Acids or alkalis speed this up. Polyesters can therefore be broken down more easily than addition polymers.
Key term
ester link
An ester link is the group that joins two carbon chains.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 5 of 6: Polyamides have strong hydrogen bonding between chains
A diamine and a dicarboxylic acid form an amide link, , and water. Nylon-6,6 uses hexane-1,6-diamine and hexanedioic acid. Each monomer has six carbon atoms, which explains the name. The two monomers join alternately along the chain, and nylon-6,6 is spun into fibres for clothing and ropes.
A diacyl chloride can replace the acid. It reacts faster and releases hydrogen chloride instead of water.
Polyester and polyamide compared
- Feature
- Link
- Polyester
- Polyamide
- Feature
- Monomers
- Polyester
- diol and dicarboxylic acid
- Polyamide
- diamine and dicarboxylic acid
- Feature
- Attraction between chains
- Polyester
- dipole–dipole forces
- Polyamide
- hydrogen bonds
- Feature
- Example
- Polyester
- PET
- Polyamide
- nylon-6,6
Hydrogen bonds form between N–H and C=O groups on neighbouring chains. Polyesters have no N–H groups, so these bonds cannot form. Polyamide fibres are therefore usually stronger.
Key term
amide link
An amide link is the group that joins two carbon chains.
Part 6 of 6: Waste polymers raise problems, and each disposal route has costs
Addition polymers have strong carbon–carbon bonds and no polar groups for water to attack. Most are not biodegradable, so they persist in the environment. Most polymers are also made from crude oil, which is a finite resource.
- Landfill: takes up land, and the polymer lasts for many years.
- Incineration: releases energy that can generate electricity, but forms carbon dioxide and, from PVC, toxic hydrogen chloride.
- Recycling: the polymer is melted and remoulded, or broken down into feedstock for new products.
Key term
biodegradable
A biodegradable material is one that microorganisms can break down into simpler substances.
Check your recall[15 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.State[1 mark]
State what is meant by a repeating unit.
Show mark schemeHide mark scheme
Model answer
A repeating unit is the smallest section of a polymer chain that repeats along its length.
- 1 mark for stating that it is the smallest section of the chain that repeats
- 2.Give[2 marks]
Give the repeating unit of poly(chloroethene).
Show mark schemeHide mark scheme
Model answer
- 1 mark for drawing a two-carbon chain unit with one chlorine atom as a side group
- 1 mark for showing open bonds through the brackets
- 3.Compare[3 marks]
Compare addition polymerisation and condensation polymerisation.
Show mark schemeHide mark scheme
Model answer
Addition polymerisation uses monomers with a carbon–carbon double bond and gives only the polymer. Condensation polymerisation uses monomers with two functional groups and loses a small molecule, such as water, at each link.
- 1 mark for stating that addition monomers contain a carbon–carbon double bond
- 1 mark for stating that addition gives only a polymer
- 1 mark for stating that condensation loses a small molecule such as water
- 4.Describe[3 marks]
Describe how nylon-6,6 forms from hexane-1,6-diamine and hexanedioic acid.
Show mark schemeHide mark scheme
Model answer
An amine group on the diamine reacts with a carboxyl group on the acid. An amide link is formed and water is lost. This happens at both ends of each monomer, so a long chain forms.
- 1 mark for stating that amine groups react with carboxyl groups
- 1 mark for stating that an amide link forms and water is lost
- 1 mark for stating that reaction at both ends builds a chain
- 5.Explain[3 marks]
Explain why polyamides have stronger forces between chains than polyesters.
Show mark schemeHide mark scheme
Model answer
Polyamide chains contain N–H and C=O groups. These form hydrogen bonds between neighbouring chains. Polyesters have no N–H groups, so they have only weaker dipole–dipole forces.
- 1 mark for stating that polyamides contain N–H and C=O groups
- 1 mark for stating that hydrogen bonds form between chains
- 1 mark for stating that polyesters cannot form hydrogen bonds between their own chains
- 6.Evaluate[3 marks]
Evaluate incineration as a way of disposing of waste polymers.
Show mark schemeHide mark scheme
Model answer
Incineration releases energy that can generate electricity and reduces the volume of waste in landfill. However, it forms carbon dioxide and burning PVC releases toxic hydrogen chloride, which must be removed from the gases.
- 1 mark for stating an advantage such as energy released or less landfill
- 1 mark for stating a disadvantage such as carbon dioxide formed
- 1 mark for stating that toxic gases such as hydrogen chloride can form from PVC

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyIdentify[1 mark]
Show answer and explanation
Answer: C · Worked explanation
MediumPredict[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumIdentify[1 mark]
Show answer and explanation
Answer: D · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: A · Worked explanation
MediumExplain[1 mark]
Show answer and explanation
Answer: A · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: B · Worked explanation
HardIdentify[2 marks]
Show answer and explanation
Answer: C · Worked explanation
HardIdentify[2 marks]
Show answer and explanation
Answer: A · Worked explanation