Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Chemistry
  3. ›3.3 Organic chemistry
  4. ›3.3.11 Amines

AQA A-level Chemistry · Section 3.3 · Organic chemistry

3.3.11 Amines

Describe and name amines, explain their basicity, and outline how they are made and how they react as nucleophiles.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Amines contain nitrogen bonded to carbon groups
  1. 1Amines contain nitrogen bonded to carbon groups
  2. 2Amines act as bases because nitrogen has a lone pair
  3. 3Groups on nitrogen change how basic an amine is
  4. 4Ammonia reacts with halogenoalkanes to make amines
  5. 5Reduction of nitriles and nitrobenzene also gives amines
  6. 6Amines are nucleophiles, so they substitute repeatedly
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Amines contain nitrogen bonded to carbon groups

Ammonia, NH3\mathrm{NH_3}NH3​, has three hydrogen atoms bonded to nitrogen. Replace one or more of them with alkyl groups and the result is an amine. Rotting fish smells strongly of amines.

A primary amine has one alkyl group on nitrogen, as in CH3CH2NH2\mathrm{CH_3CH_2NH_2}CH3​CH2​NH2​. A secondary amine has two alkyl groups and a tertiary amine has three. Names use the alkyl group plus the ending -amine, or the carbon chain with the ending -amine.

Classes and names of simple amines

FormulaClassName
CH3NH2\mathrm{CH_3NH_2}CH3​NH2​primarymethylamine
CH3CH2CH2NH2\mathrm{CH_3CH_2CH_2NH_2}CH3​CH2​CH2​NH2​primarypropylamine (propan-1-amine)
C6H5NH2\mathrm{C_6H_5NH_2}C6​H5​NH2​primaryphenylamine
(CH3)2NH\mathrm{(CH_3)_2NH}(CH3​)2​NHsecondarydimethylamine
(CH3)3N\mathrm{(CH_3)_3N}(CH3​)3​Ntertiarytrimethylamine
Formula
CH3NH2\mathrm{CH_3NH_2}CH3​NH2​
Class
primary
Name
methylamine
Formula
CH3CH2CH2NH2\mathrm{CH_3CH_2CH_2NH_2}CH3​CH2​CH2​NH2​
Class
primary
Name
propylamine (propan-1-amine)
Formula
C6H5NH2\mathrm{C_6H_5NH_2}C6​H5​NH2​
Class
primary
Name
phenylamine
Formula
(CH3)2NH\mathrm{(CH_3)_2NH}(CH3​)2​NH
Class
secondary
Name
dimethylamine
Formula
(CH3)3N\mathrm{(CH_3)_3N}(CH3​)3​N
Class
tertiary
Name
trimethylamine

Common mistake

Amines are classed by the number of carbon groups on nitrogen. Alcohols are different: they are classed by the carbon atom that carries the hydroxyl group.

Key terms · tap one for its definition

amine

An amine is an organic compound containing nitrogen bonded to carbon, without that nitrogen bonded directly to a carbonyl carbon.

primary amine

A primary amine is an amine in which the nitrogen atom is bonded to one carbon group and two hydrogen atoms.

Part 1 done

2

Part 2 of 6: Amines act as bases because nitrogen has a lone pair

Now look at what the nitrogen atom can do. It has a lone pair, a pair of outer electrons not used in bonding. This pair can form a bond to a hydrogen ion, with both shared electrons supplied by nitrogen.

Figure 1. The lone pair on nitrogen forms a bond to a hydrogen ion. The nitrogen then carries a positive charge.

A Brønsted–Lowry base accepts a proton, so amines are bases. With acids they form salts: CH3CH2NH2(aq)+HCl(aq)→CH3CH2NH3+Cl−(aq)\mathrm{CH_3CH_2NH_2(aq) + HCl(aq) \rightarrow CH_3CH_2NH_3^+Cl^-(aq)}CH3​CH2​NH2​(aq)+HCl(aq)→CH3​CH2​NH3+​Cl−(aq).

In water, a small fraction of molecules accept protons from water. The solution is alkaline: CH3NH2(aq)+H2O(l)⇌CH3NH3+(aq)+OH−(aq)\mathrm{CH_3NH_2(aq) + H_2O(l) \rightleftharpoons CH_3NH_3^+(aq) + OH^-(aq)}CH3​NH2​(aq)+H2​O(l)⇌CH3​NH3+​(aq)+OH−(aq). The equilibrium lies well to the left, so amines are weak bases.

Key terms · tap one for its definition

lone pair

A lone pair is a pair of outer-shell electrons on an atom that is not involved in bonding.

Brønsted–Lowry base

A Brønsted–Lowry base is a species that accepts a proton, H+\mathrm{H^+}H+, from another species.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the secondary amine.
Show answer and explanation

Answer: B · Worked explanation

A secondary amine has two carbon groups bonded to nitrogen, as in (CH3)2NH\mathrm{(CH_3)_2NH}(CH3​)2​NH. The compound (CH3)3N\mathrm{(CH_3)_3N}(CH3​)3​N is tempting but has three carbon groups, so it is tertiary. The other two compounds each have one carbon group on nitrogen, so they are primary.
3

Part 3 of 6: Groups on nitrogen change how basic an amine is

Ammonia, ethylamine and phenylamine are all bases, but they differ in strength. The key is how available the lone pair on nitrogen is for accepting a proton.

An alkyl group pushes electron density towards nitrogen. This makes the lone pair more available, so ethylamine is a stronger base than ammonia. In phenylamine, delocalisation spreads the lone pair into the benzene ring. It is then less available, so phenylamine is the weakest of the three.

Relative strength of three bases

BaseStrengthReason
ethylaminestrongestalkyl group pushes electron density onto nitrogen
ammoniaintermediateno alkyl group and no ring
phenylamineweakestlone pair delocalised into the ring
Base
ethylamine
Strength
strongest
Reason
alkyl group pushes electron density onto nitrogen
Base
ammonia
Strength
intermediate
Reason
no alkyl group and no ring
Base
phenylamine
Strength
weakest
Reason
lone pair delocalised into the ring

Exam tip

When comparing bases, write about how available the lone pair is for accepting a proton. Saying that one amine simply has more electrons earns no credit.

Key term

delocalisation

Delocalisation is the spreading of electrons over more than two atoms instead of keeping them between one pair.

Part 3 done

4

Part 4 of 6: Ammonia reacts with halogenoalkanes to make amines

Amines can be made in the laboratory from halogenoalkanes. Heat the halogenoalkane with an excess of ammonia dissolved in ethanol. Use a sealed tube, because ammonia is a gas and would escape.

Ammonia is a nucleophile, a species that donates a lone pair to form a covalent bond. It attacks the carbon bonded to the halogen, and the halide ion leaves. This is nucleophilic substitution.

CH3CH2Br(l)+2NH3(g)→CH3CH2NH2(g)+NH4Br(s)\mathrm{CH_3CH_2Br(l) + 2NH_3(g) \rightarrow CH_3CH_2NH_2(g) + NH_4Br(s)}CH3​CH2​Br(l)+2NH3​(g)→CH3​CH2​NH2​(g)+NH4​Br(s)

Common mistake

A limited amount of ammonia gives a mixture of products. The amine formed is also a nucleophile, so it can react again with the halogenoalkane.

Key terms · tap one for its definition

nucleophile

A nucleophile is a species that donates a lone pair of electrons to form a new covalent bond.

nucleophilic substitution

Nucleophilic substitution replaces a group attached to carbon with a nucleophile.

Part 4 done

Quick check

One question on the part you just read

Easy

State the feature of an amine that allows it to act as a Brønsted–Lowry base.
Show answer and explanation

Answer: C · Worked explanation

The lone pair on nitrogen can form a bond to a proton, so the amine accepts a proton and acts as a base. A polar carbon–nitrogen bond is present but does not accept protons. Amines have no hydroxyl group and no carbon–nitrogen double bond.
5

Part 5 of 6: Reduction of nitriles and nitrobenzene also gives amines

A second route builds the amine by reduction. In organic chemistry this often means adding hydrogen. A nitrile contains the −C≡N\mathrm{{-}C{\equiv}N}−C≡N group, and reducing it gives a primary amine with the same number of carbon atoms.

  • Nitrile: LiAlH4\mathrm{LiAlH_4}LiAlH4​ in dry ether, then dilute acid
  • Nitrile: hydrogen gas with a nickel catalyst
  • Nitrobenzene: tin and concentrated hydrochloric acid, heated under reflux, then excess sodium hydroxide

The acid step forms a salt of phenylamine, and the alkali then releases the free amine. Using [H] for the reducing agent, CH3CN+4[H]→CH3CH2NH2\mathrm{CH_3CN + 4[H] \rightarrow CH_3CH_2NH_2}CH3​CN+4[H]→CH3​CH2​NH2​ and C6H5NO2+6[H]→C6H5NH2+2H2O\mathrm{C_6H_5NO_2 + 6[H] \rightarrow C_6H_5NH_2 + 2H_2O}C6​H5​NO2​+6[H]→C6​H5​NH2​+2H2​O.

Exam tip

Check that reduction equations balance after you write [H]. Count hydrogen atoms on both sides, since the [H] atoms are easy to miss.

Key terms · tap one for its definition

reduction

Reduction is the gain of electrons by a species.

nitrile

A nitrile is an organic compound containing the −C≡N\mathrm{{-}C{\equiv}N}−C≡N functional group.

Part 5 done

6

Part 6 of 6: Amines are nucleophiles, so they substitute repeatedly

An amine has a lone pair, so it is a nucleophile too. A primary amine can attack another halogenoalkane and form a secondary amine. Repeating this gives a tertiary amine. Excess ammonia in the preparation keeps this to a minimum.

The last stage gives a quaternary ammonium salt. Its nitrogen carries four alkyl groups and a positive charge. With a long alkyl chain, these salts are used as cationic surfactants in fabric conditioners.

Amines also react with acyl chlorides. Ethylamine and ethanoyl chloride form N-ethylethanamide, an amide: CH3COCl+CH3CH2NH2→CH3CONHCH2CH3+HCl\mathrm{CH_3COCl + CH_3CH_2NH_2 \rightarrow CH_3CONHCH_2CH_3 + HCl}CH3​COCl+CH3​CH2​NH2​→CH3​CONHCH2​CH3​+HCl.

Key term

quaternary ammonium salt

A quaternary ammonium salt is an ionic compound containing a positively charged nitrogen atom bonded to four alkyl groups.

Note read

Check your recall[14 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Name[2 marks]

    Name the amine CH3CH2CH2NH2\mathrm{CH_3CH_2CH_2NH_2}CH3​CH2​CH2​NH2​ and give its class.

    Show mark schemeHide mark scheme

    Model answer

    It is propylamine (propan-1-amine), a primary amine.

    • 1 mark for naming it propylamine or propan-1-amine
    • 1 mark for stating that it is a primary amine
  2. 2.Explain[2 marks]

    Explain why ethylamine acts as a base.

    Show mark schemeHide mark scheme

    Model answer

    The nitrogen atom has a lone pair of electrons. This lone pair can accept a proton, so ethylamine is a Brønsted–Lowry base.

    • 1 mark for stating that nitrogen has a lone pair
    • 1 mark for stating that the lone pair accepts a proton
  3. 3.Explain[3 marks]

    Explain why phenylamine is a weaker base than ethylamine.

    Show mark schemeHide mark scheme

    Model answer

    In phenylamine the lone pair on nitrogen is delocalised into the benzene ring, so it is less available to accept a proton. In ethylamine the alkyl group pushes electron density onto nitrogen. This makes the lone pair more available.

    • 1 mark for stating that the lone pair in phenylamine is delocalised into the ring
    • 1 mark for stating that the lone pair is then less available to accept a proton
    • 1 mark for stating that the alkyl group in ethylamine pushes electron density onto nitrogen, making the lone pair more available
  4. 4.Describe[3 marks]

    Describe how bromoethane is converted into ethylamine, including the type of reaction.

    Show mark schemeHide mark scheme

    Model answer

    Heat bromoethane with excess ammonia in ethanol in a sealed tube. Ammonia acts as a nucleophile, so this is nucleophilic substitution.

    • 1 mark for stating excess ammonia dissolved in ethanol
    • 1 mark for stating heating in a sealed tube
    • 1 mark for identifying the reaction as nucleophilic substitution
  5. 5.Suggest[2 marks]

    Suggest why a mixture of amines forms when bromoethane reacts with only a small amount of ammonia.

    Show mark schemeHide mark scheme

    Model answer

    The ethylamine formed is also a nucleophile. It can attack more bromoethane, giving secondary and tertiary amines.

    • 1 mark for stating that ethylamine has a lone pair and is a nucleophile
    • 1 mark for stating that it reacts again with bromoethane to give secondary and tertiary amines
  6. 6.State[2 marks]

    State the reagents used to reduce nitrobenzene to phenylamine.

    Show mark schemeHide mark scheme

    Model answer

    Tin and concentrated hydrochloric acid, heated under reflux, followed by excess sodium hydroxide.

    • 1 mark for stating tin and concentrated hydrochloric acid
    • 1 mark for stating excess sodium hydroxide added afterwards

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Name[1 mark]

Name the compound C6H5NH2\mathrm{C_6H_5NH_2}C6​H5​NH2​.
Show answer and explanation

Answer: A · Worked explanation

The compound has a phenyl ring bonded to an NH2\mathrm{NH_2}NH2​ group, so it is phenylamine. Nitrobenzene is tempting because it contains the same ring and a nitrogen atom, but it carries an NO2\mathrm{NO_2}NO2​ group instead. It is a nitro compound, not an amine.
4.

Medium·Identify[1 mark]

Identify the reagent and conditions that convert 1-bromopropane into propylamine.
Show answer and explanation

Answer: D · Worked explanation

Excess ammonia in ethanol, heated in a sealed tube, substitutes the bromine and gives a primary amine. Aqueous sodium hydroxide is tempting but gives propan-1-ol. A small amount of ammonia would give secondary and tertiary amines as well. Hydrogen with nickel reduces nitriles, which is a different route.
5.

Medium·Predict[1 mark]

Predict the organic product when ethylamine reacts with dilute hydrochloric acid.
Show answer and explanation

Answer: A · Worked explanation

The lone pair on nitrogen accepts a proton, forming the ethylammonium ion, which pairs with chloride ions as a salt. Chloroethane and ammonia would need the carbon–nitrogen bond to break, which does not happen. The amide forms only with acyl chlorides.
6.

Medium·Calculate[2 marks]

Nitrobenzene is reduced to phenylamine in a one-to-one molar ratio. The relative molecular masses are 123 for nitrobenzene and 93 for phenylamine. Calculate the maximum mass of phenylamine from 12.3 g of nitrobenzene.
Show answer and explanation

Answer: A · Worked explanation

Amount of nitrobenzene = 12.3 g123 g mol−1=0.100 mol\frac{12.3\,\mathrm{g}}{123\,\mathrm{g\,mol^{-1}}}=0.100\,\mathrm{mol}123gmol−112.3g​=0.100mol. The ratio is one to one, so mass = 0.100 mol×93 g mol−1=9.30 g0.100\,\mathrm{mol}\times93\,\mathrm{g\,mol^{-1}}=9.30\,\mathrm{g}0.100mol×93gmol−1=9.30g. A mass of 12.3 g comes from assuming the mass stays the same, which ignores the different relative molecular masses. The answer is given to three significant figures to match the data.
7.

Medium·Identify[1 mark]

Ethylamine reacts with ethanoyl chloride. Identify the organic product.
Show answer and explanation

Answer: C · Worked explanation

The nitrogen lone pair attacks the carbonyl carbon and chloride is lost, giving N-ethylethanamide. Ethyl ethanoate is tempting but needs an alcohol, not an amine. Ethanoic acid would form only if the acyl chloride reacted with water. The other product of the reaction is hydrogen chloride.
8.

Hard·Explain[2 marks]

A chemist heats 1-bromopropane with a small amount of ammonia in ethanol. A mixture of amines forms. Identify the best explanation.
Show answer and explanation

Answer: D · Worked explanation

Propylamine still has a lone pair on nitrogen, so it is a nucleophile and attacks another 1-bromopropane molecule. This gives secondary, then tertiary, amines. Bromide ions are the departing ions, not the attacking species, and ethanol does not make amines.
9.

Hard·Predict[2 marks]

Predict the order of increasing base strength.
Show answer and explanation

Answer: A · Worked explanation

The alkyl group in ethylamine pushes electron density onto nitrogen, making its lone pair most available, so it is the strongest base. In phenylamine the lone pair is delocalised into the ring, so it is the weakest. Treating phenylamine as the strongest wrongly assumes the ring donates electron density.
10.

Hard·Identify[2 marks]

Propanenitrile, CH3CH2CN\mathrm{CH_3CH_2CN}CH3​CH2​CN, is reduced using LiAlH4\mathrm{LiAlH_4}LiAlH4​ in dry ether. Identify the amine formed.
Show answer and explanation

Answer: C · Worked explanation

Reduction turns the C≡N\mathrm{C{\equiv}N}C≡N group into CH2NH2\mathrm{CH_2NH_2}CH2​NH2​ and keeps the nitrile carbon, so three carbons remain and the product is propylamine. Butylamine wrongly adds an extra carbon. Ethylamine would need a carbon to be lost, and propan-2-amine would need nitrogen on the middle carbon.

Keep going

Next topic3.3.12 PolymersPrevious topic3.3.10 Aromatic chemistry

More in Section 3.3 · Organic chemistry

  1. 3.3.7Optical isomerismNotes · 10 questions
  2. 3.3.8Aldehydes and ketonesNotes · 10 questions
  3. 3.3.9Carboxylic acids and derivativesNotes · 10 questions
  4. 3.3.10Aromatic chemistryNotes · 10 questions
  5. 3.3.11AminesNotes · 10 questions
  6. 3.3.12PolymersNotes · 10 questions
  7. 3.3.13Amino acids, proteins and DNANotes · 10 questions
  8. 3.3.14Organic synthesisNotes · 10 questions
  9. 3.3.15NMR spectroscopyNotes · 9 questions

All AQA A-level Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1Amines contain nitrogen bonded to carbon groups
  2. 2Amines act as bases because nitrogen has a lone pair
  3. 3Groups on nitrogen change how basic an amine is
  4. 4Ammonia reacts with halogenoalkanes to make amines
  5. 5Reduction of nitriles and nitrobenzene also gives amines
  6. 6Amines are nucleophiles, so they substitute repeatedly
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe