Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›6.2 Physics: Electricity
  4. ›6.2.1 Current, potential difference and resistance

AQA GCSE Combined Science: Trilogy · Section 6.2 · Physics: Electricity

6.2.1 Current, potential difference and resistance

Explain current, potential difference and resistance, and calculate values using the resistance equation.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Current is the flow of electric charge
  1. 1Current is the flow of electric charge
  2. 2Potential difference gives charge a driving push
  3. 3Resistance opposes the flow of charge
  4. 4The resistance equation links three circuit measurements
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Current is the flow of electric charge

Electric current is the rate at which electric charge flows. Its unit is the ampere (A). In metal wires, the moving charges are electrons. They move through the wire when the circuit is complete. A switch can break the circuit, stopping the continuous flow of charge.

Conventional current is shown flowing from the positive terminal to the negative terminal. Electrons actually move in the opposite direction. This difference in direction does not change circuit calculations. An ammeter measures current and is connected in the path of the current.

Common mistake

Current is not the same as the speed of individual electrons. It measures how much charge passes a point each second.

Key terms · tap one for its definition

Electric current

Electric current is the rate at which electric charge flows past a point.

Electrons

Electrons are negatively charged particles that carry charge through metal wires.

Conventional current

Conventional current is the direction of charge flow taken as positive to negative.

Part 1 done

2

Part 2 of 4: Potential difference gives charge a driving push

Potential difference is the energy transferred per unit of charge between two points. It is measured in volts (V). A cell provides a potential difference, which can drive charge around a complete circuit. A voltmeter measures potential difference between two points. Connect it across the component being measured.

Current tells you how quickly charge flows past a point. Potential difference tells you how much energy each unit of charge transfers between two points. They are different measurements, even though they are linked. For a fixed resistance, a greater potential difference produces a greater current.

Exam tip

Describe current as charge flow per second. Describe potential difference as energy transferred per unit of charge.

Key term

Potential difference

Potential difference is the energy transferred per unit of charge between two points.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify what electric current measures in a circuit.
Show answer and explanation

Answer: C · Worked explanation

Electric current is the rate of flow of electric charge. A larger current means that more charge passes a point in the circuit each second. Energy transferred per unit of charge describes potential difference, while opposition to charge flow describes resistance.
3

Part 3 of 4: Resistance opposes the flow of charge

Resistance describes how strongly a component opposes current. Its unit is the ohm (Ω\OmegaΩ). At a fixed potential difference, greater resistance means less current. At a fixed resistance, greater potential difference means more current.

In a metal wire, moving electrons collide with the metal ions. These collisions make it harder for charge to flow. Resistance can change when conditions change. For example, a metal wire usually has greater resistance when it gets hotter. Therefore, the resistance equation must use values measured under the same conditions.

Figure 1. Hold one setting steady while changing the other. Notice how the current responds.

Common mistake

Resistance does not use up current. Greater resistance reduces the current produced by a given potential difference.

Key term

Resistance

Resistance measures how strongly a component opposes the flow of electric current.

Part 3 done

4

Part 4 of 4: The resistance equation links three circuit measurements

The equation is V=IRV=IRV=IR. Here, VVV is potential difference in volts, III is current in amperes, and RRR is resistance in ohms. Rearrange it to find current: I=VRI=\frac{V}{R}I=RV​. To find resistance, use R=VIR=\frac{V}{I}R=IV​. Use the potential difference across the component and the current through it.

Worked example

Finding the current

A component has a resistance of 4 Ω\OmegaΩ. The potential difference across it is 12 V. Calculate the current.
  1. 1
    Start with V=IRV=IRV=IR.
  2. 2
    Rearrange: I=VRI=\frac{V}{R}I=RV​.
  3. 3
    Substitute: I=124=3I=\frac{12}{4}=3I=412​=3.

Answer: The current is 3 A.

Check that the answer fits the relationship. A larger resistance would give a smaller current if the potential difference stayed at 12 V. Convert values to volts, amperes and ohms before substituting them.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe what electric current measures and how charge flows in a metal wire.

    Show mark schemeHide mark scheme

    Model answer

    Current measures the rate of charge flow. Electrons carry the charge through a metal wire, and they flow when the circuit is complete.

    • 1 mark for stating that current is the rate of charge flow
    • 1 mark for identifying electrons as the moving charges in a metal wire
    • 1 mark for stating that a complete circuit allows continuous charge flow
  2. 2.Explain[2 marks]

    Explain how potential difference differs from current.

    Show mark schemeHide mark scheme

    Model answer

    Potential difference is energy transferred per unit of charge between two points. Current is the rate at which charge flows.

    • 1 mark for describing potential difference as energy transferred per unit of charge
    • 1 mark for describing current as the rate of charge flow
  3. 3.Explain[2 marks]

    Explain what happens to current when resistance increases but potential difference stays constant.

    Show mark schemeHide mark scheme

    Model answer

    The current decreases. A greater resistance opposes the flow of charge more strongly.

    • 1 mark for stating that the current decreases
    • 1 mark for linking the decrease to greater opposition to charge flow
  4. 4.Calculate[3 marks]

    Calculate the resistance of a component with 6 V across it and a current of 0.5 A.

    Show mark schemeHide mark scheme

    Model answer

    R=VI=60.5=12 ΩR=\frac{V}{I}=\frac{6}{0.5}=12\,\OmegaR=IV​=0.56​=12Ω.

    • 1 mark for rearranging the equation to R=VIR=\frac{V}{I}R=IV​
    • 1 mark for substituting 6 V and 0.5 A correctly
    • 1 mark for giving 12 Ω\OmegaΩ
  5. 5.Calculate[2 marks]

    Calculate the potential difference across a 5 Ω\OmegaΩ component carrying 2 A.

    Show mark schemeHide mark scheme

    Model answer

    V=IR=2×5=10 VV=IR=2\times5=10\,\mathrm{V}V=IR=2×5=10V.

    • 1 mark for using V=IRV=IRV=IR with the given values
    • 1 mark for giving 10 V

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State the direction of conventional current in a circuit powered by a cell.
Show answer and explanation

Answer: B · Worked explanation

Conventional current is defined as flowing from the positive terminal of a cell to its negative terminal through the external circuit. Electrons move in the opposite direction, from negative to positive, so the option describing current as moving with the electrons is a common misconception.
3.

Easy·Identify[1 mark]

Identify what potential difference between two points in a circuit describes.
Show answer and explanation

Answer: D · Worked explanation

Potential difference is the energy transferred per unit of charge between two points. It is measured in volts. Charge passing a point per unit time is current, and opposition to charge flow is resistance, so neither of those describes potential difference.
4.

Easy·State[1 mark]

A fixed voltage is applied across a resistor. State what happens to the current if the resistance increases.
Show answer and explanation

Answer: A · Worked explanation

For a fixed potential difference, increasing resistance reduces the current. This follows from I=V/RI = V/RI=V/R: with VVV unchanged, a larger value of RRR gives a smaller value of III. The current does not necessarily become zero; it is simply reduced.
5.

Medium·Calculate[1 mark]

A 12 V12\,\text{V}12V supply is connected across a 4 Ω4\,\Omega4Ω resistor. Calculate the current.
Show answer and explanation

Answer: C · Worked explanation

Use V=IRV = IRV=IR, rearranged to I=V/RI = V/RI=V/R. Substituting the values gives I=12 V/4 Ω=3 AI = 12\,\text{V}/4\,\Omega = 3\,\text{A}I=12V/4Ω=3A. The tempting value 48 A48\,\text{A}48A comes from multiplying voltage by resistance rather than dividing.
6.

Medium·Determine[1 mark]

A current of 0.5 A0.5\,\text{A}0.5A flows through a component with a potential difference of 6 V6\,\text{V}6V. Determine its resistance.
Show answer and explanation

Answer: A · Worked explanation

Rearrange V=IRV = IRV=IR to give R=V/IR = V/IR=V/I. Substituting gives R=6 V/0.5 A=12 ΩR = 6\,\text{V}/0.5\,\text{A} = 12\,\OmegaR=6V/0.5A=12Ω. The value 3 Ω3\,\Omega3Ω results from multiplying the current by the voltage, rather than dividing voltage by current.
7.

Medium·Calculate[1 mark]

A charge of 18 C18\,\text{C}18C passes a point in a circuit in 6 s6\,\text{s}6s. Calculate the current at that point.
Show answer and explanation

Answer: A · Worked explanation

Current is charge flow per unit time, so use I=Q/tI = Q/tI=Q/t. The calculation is I=18 C/6 s=3 AI = 18\,\text{C}/6\,\text{s} = 3\,\text{A}I=18C/6s=3A. Multiplying charge by time gives 108, but that is not the rate of charge flow and has the wrong units for current.
8.

Medium·Compare[1 mark]

A student says that a current of 2 A2\,\text{A}2A and a potential difference of 2 V2\,\text{V}2V mean the same thing because both contain the number 2. Compare what the two measurements describe.
Show answer and explanation

Answer: D · Worked explanation

Current and potential difference describe different quantities: current is the rate of charge flow, while potential difference is energy transferred per unit charge. Their numerical values cannot be compared just because both are 2; they have different units and meanings. The reversed description swaps the definitions.
9.

Medium·Determine[2 marks]

A 10 V10\,\text{V}10V supply is connected first to a 5 Ω5\,\Omega5Ω resistor and then, without changing the supply, to a 10 Ω10\,\Omega10Ω resistor. Determine how the current changes.
Show answer and explanation

Answer: B · Worked explanation

Use I=V/RI = V/RI=V/R for each resistor. With 5 Ω5\,\Omega5Ω, the current is 10 V/5 Ω=2 A10\,\text{V}/5\,\Omega = 2\,\text{A}10V/5Ω=2A; with 10 Ω10\,\Omega10Ω, it is 10 V/10 Ω=1 A10\,\text{V}/10\,\Omega = 1\,\text{A}10V/10Ω=1A. The current halves because the resistance doubles while the potential difference stays fixed.
10.

Hard·Deduce[2 marks]

A component has a potential difference of 9 V9\,\text{V}9V across it and a current of 3 A3\,\text{A}3A through it. It is replaced by another component across the same supply, and the current becomes 1.5 A1.5\,\text{A}1.5A. Deduce the resistance of the replacement component.
Show answer and explanation

Answer: B · Worked explanation

The replacement component still has 9 V9\,\text{V}9V across it, so use R=V/IR = V/IR=V/I. This gives R=9 V/1.5 A=6 ΩR = 9\,\text{V}/1.5\,\text{A} = 6\,\OmegaR=9V/1.5A=6Ω. The value 13.5 Ω13.5\,\Omega13.5Ω comes from multiplying the voltage by the current, not dividing by it.

Keep going

Next topic6.2.2 Series and parallel circuitsPrevious topic6.1.3 Energy resources

More in Section 6.2 · Physics: Electricity

  1. 6.2.1Current, potential difference and resistanceNotes · 10 questions
  2. 6.2.2Series and parallel circuitsNotes · 10 questions
  3. 6.2.3Domestic electricityNotes · 10 questions
  4. 6.2.4Energy transfers in circuitsNotes · 10 questions

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1Current is the flow of electric charge
  2. 2Potential difference gives charge a driving push
  3. 3Resistance opposes the flow of charge
  4. 4The resistance equation links three circuit measurements
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe