Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›6.2 Physics: Electricity
  4. ›6.2.2 Series and parallel circuits

AQA GCSE Combined Science: Trilogy · Section 6.2 · Physics: Electricity

6.2.2 Series and parallel circuits

Compare series and parallel circuits, draw their diagrams, and explain changes in resistance and bulb brightness.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Circuit symbols show whether components share one path
  1. 1Circuit symbols show whether components share one path
  2. 2Current and potential difference follow different rules
  3. 3Adding resistors changes total resistance in opposite ways
  4. 4Bulb brightness depends on how bulbs are connected
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Circuit symbols show whether components share one path

In a series circuit, components follow one another around a single path. In a parallel circuit, the path divides into branches and joins again. Draw wires as straight lines and show each bulb as a circle with a cross inside. Show a cell with two unequal parallel lines. The longer line marks its positive terminal.

To draw two bulbs in series, place both symbols on the same loop. To draw them in parallel, place one bulb on each branch. Join both branches to the cell. A diagram shows electrical connections, not the physical positions of the parts.

Figure 1. Both diagrams use one cell and two bulbs. Trace the paths from one cell terminal to the other.

Key terms · tap one for its definition

series circuit

A series circuit connects components along a single path for current.

parallel circuit

A parallel circuit has branches that provide separate paths for current.

Part 1 done

2

Part 2 of 4: Current and potential difference follow different rules

Current is the same everywhere in a series circuit. At a junction in a parallel circuit, current splits between branches. The branch currents add to give the total current. Current may differ between branches if their resistances differ.

Potential difference is shared between components in series. The potential differences across those components add to the supply potential difference. In parallel, each branch has the full supply potential difference. This applies when each branch connects across the same two points of the supply.

Common mistake

Current is not used up by a bulb. In series, the same current flows before and after it.

Key terms · tap one for its definition

Current

Current is the rate of flow of electric charge.

Potential difference

Potential difference is the energy transferred per unit charge between two points.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the statement that describes current in a series circuit.
Show answer and explanation

Answer: C · Worked explanation

A series circuit has only one path for charge to flow, so the current has the same value at every point in that path. The idea that current is divided between components describes a parallel circuit, where there are separate branches for the charge to flow through.
3

Part 3 of 4: Adding resistors changes total resistance in opposite ways

In series, total resistance is the sum of the individual resistances. Adding another resistor increases the total resistance. With an unchanged supply, this reduces the current throughout the circuit.

In parallel, each new branch provides another path for current. Adding a branch reduces the total resistance, provided its components allow current to flow. The total resistance is less than the resistance of any individual branch. With an unchanged supply, the total current increases. The current in an existing branch stays the same if that branch and the supply remain unchanged.

Worked example

Finding resistance in series

Two resistors of 2 Ω and 3 Ω are connected in series. Find their total resistance.
  1. 1
    For series resistors, add the individual resistances.
  2. 2
    Rtotal=2 Ω+3 Ω=5 ΩR_{\mathrm{total}}=2\,\Omega+3\,\Omega=5\,\OmegaRtotal​=2Ω+3Ω=5Ω.

Answer: The total resistance is 5 Ω.

Key term

total resistance

Total resistance is the resistance of the whole circuit as seen by the supply.

Part 3 done

4

Part 4 of 4: Bulb brightness depends on how bulbs are connected

With identical bulbs and an unchanged supply, adding a bulb in series makes each bulb dimmer. Total resistance rises, so the current falls. The supply potential difference is also shared among more bulbs.

Adding an identical bulb on a new parallel branch does not dim the existing bulbs. Each branch still has the full supply potential difference. More current is drawn from the supply overall. These comparisons assume the supply potential difference stays constant. Real cells may not maintain it exactly when more current is drawn.

Exam tip

When comparing brightness, state whether the bulbs are identical and whether the supply stays unchanged.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Draw[3 marks]

    Draw a circuit with one cell and two bulbs connected in parallel.

    Show mark schemeHide mark scheme

    Model answer

    Draw a cell using unequal parallel lines. Draw two branches between junctions, with one bulb symbol on each branch. Connect the branches to the cell to make complete paths.

    • 1 mark for showing a cell with the correct symbol
    • 1 mark for showing two branches between junctions, with one bulb symbol on each
    • 1 mark for connecting both branches to the cell to make complete paths
  2. 2.Compare[4 marks]

    Compare current and potential difference across two bulbs in series and parallel circuits.

    Show mark schemeHide mark scheme

    Model answer

    In series, current is the same through both bulbs. Their potential differences add to the supply potential difference. In parallel, current splits between the branches. Each branch has the full supply potential difference.

    • 1 mark for stating that current is the same through both series bulbs
    • 1 mark for stating that potential differences across series bulbs add to the supply potential difference
    • 1 mark for stating that current splits between parallel branches
    • 1 mark for stating that each parallel branch has the full supply potential difference
  3. 3.Calculate[2 marks]

    Calculate the total resistance of 4 Ω and 6 Ω resistors connected in series.

    Show mark schemeHide mark scheme

    Model answer

    Add the resistances: Rtotal=4 Ω+6 Ω=10 ΩR_{\mathrm{total}}=4\,\Omega+6\,\Omega=10\,\OmegaRtotal​=4Ω+6Ω=10Ω.

    • 1 mark for adding the two resistances
    • 1 mark for giving 10 Ω as the total resistance
  4. 4.Explain[3 marks]

    Explain how adding a resistor on a new parallel branch affects total resistance and total current.

    Show mark schemeHide mark scheme

    Model answer

    The new branch gives current another path. This reduces total resistance. If the supply potential difference stays unchanged, total current increases.

    • 1 mark for stating that the new branch provides another path for current
    • 1 mark for stating that total resistance decreases
    • 1 mark for stating that total current increases if the supply potential difference stays unchanged
  5. 5.Explain[3 marks]

    Explain how adding an identical bulb affects existing bulbs in series and in parallel.

    Show mark schemeHide mark scheme

    Model answer

    With an unchanged supply, existing series bulbs become dimmer because total resistance increases and current falls. Existing parallel bulbs stay at the same brightness because each branch still has the full supply potential difference.

    • 1 mark for stating that existing series bulbs become dimmer as total resistance increases and current falls
    • 1 mark for stating that existing parallel bulbs stay at the same brightness
    • 1 mark for explaining that each parallel branch still has the full supply potential difference

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify the standard circuit symbol made from one long line beside one short line.
Show answer and explanation

Answer: C · Worked explanation

A cell is represented by a pair of parallel lines of unequal length: the longer line represents the positive terminal and the shorter line the negative terminal. A resistor is shown as a rectangular box in a circuit diagram, while a lamp and a switch have different symbols.
3.

Easy·State[1 mark]

State how the total resistance changes when an additional resistor is connected in series.
Show answer and explanation

Answer: A · Worked explanation

In a series circuit, the total resistance is the sum of the resistances of all the components. Adding another resistor therefore increases the total resistance. The idea that resistance decreases applies to adding a branch in parallel, not to adding a component in series.
4.

Easy·Identify[1 mark]

Identify what happens to the brightness of identical bulbs when a second bulb is added in parallel across an ideal battery.
Show answer and explanation

Answer: D · Worked explanation

Each parallel branch is connected across the battery, so the original bulb still has the same potential difference across it and remains about as bright. The claim that its current is shared confuses the current in the main circuit with the current in an individual branch.
5.

Medium·Determine[1 mark]

A 6.0 V6.0\,\text{V}6.0V battery is connected to two components in series. One component has a potential difference of 2.5 V2.5\,\text{V}2.5V. Determine the potential difference across the other component.
Show answer and explanation

Answer: B · Worked explanation

The potential differences across components in series add to the battery potential difference. Therefore, the other component has a potential difference of 6.0 V−2.5 V=3.5 V6.0\,\text{V} - 2.5\,\text{V} = 3.5\,\text{V}6.0V−2.5V=3.5V. Assigning the full 6.0 V6.0\,\text{V}6.0V to each component would incorrectly treat the components as separate parallel branches.
6.

Medium·Calculate[2 marks]

A current of 0.80 A0.80\,\text{A}0.80A reaches a junction and splits between two parallel branches. One branch carries 0.35 A0.35\,\text{A}0.35A. Calculate the current in the other branch.
Show answer and explanation

Answer: D · Worked explanation

The current entering a junction equals the total current leaving it, so the two branch currents add to 0.80 A0.80\,\text{A}0.80A. The other branch carries 0.80 A−0.35 A=0.45 A0.80\,\text{A} - 0.35\,\text{A} = 0.45\,\text{A}0.80A−0.35A=0.45A. The full 0.80 A0.80\,\text{A}0.80A is the total current, not the current in each branch.
7.

Medium·Identify[1 mark]

A student must draw a circuit containing one cell and two lamps connected in parallel. Which description correctly specifies the connections and symbols to use?
Show answer and explanation

Answer: C · Worked explanation

For two lamps in parallel, each lamp must form a branch connected across the same pair of junctions, and the cell is shown with its standard symbol. Putting the lamps one after the other gives a single series path. Branches that share only one junction do not make both lamps parallel with each other.
8.

Medium·Calculate[2 marks]

Two resistors of 4.0 Ω4.0\,\Omega4.0Ω and 7.0 Ω7.0\,\Omega7.0Ω are connected in series. Calculate their total resistance.
Show answer and explanation

Answer: D · Worked explanation

For resistors in series, add their resistances: 4.0 Ω+7.0 Ω=11.0 Ω4.0\,\Omega + 7.0\,\Omega = 11.0\,\Omega4.0Ω+7.0Ω=11.0Ω. Subtracting the values would not give the total resistance, and multiplying them is not the rule for combining series resistors.
9.

Medium·Explain[2 marks]

Two identical bulbs are added one after the other in a series circuit with a fixed battery. Explain why each bulb is dimmer than a single bulb connected to the battery.
Show answer and explanation

Answer: D · Worked explanation

In series, the battery potential difference is shared between the bulbs, and the combined resistance is greater than that of one bulb alone. This reduces the current and the power delivered to each bulb, making them dimmer. The tempting claim that each bulb receives the full battery potential difference confuses a series circuit with parallel branches.
10.

Hard·Deduce[2 marks]

A 12 V12\,\text{V}12V supply is connected to two parallel branches. The first branch has a potential difference of 12 V12\,\text{V}12V and a current of 0.50 A0.50\,\text{A}0.50A. The current in the second branch is 0.30 A0.30\,\text{A}0.30A. Deduce the total current supplied and the potential difference across the second branch.
Show answer and explanation

Answer: D · Worked explanation

In parallel, the total current is the sum of the branch currents: 0.50 A+0.30 A=0.80 A0.50\,\text{A} + 0.30\,\text{A} = 0.80\,\text{A}0.50A+0.30A=0.80A. Each branch is connected across the supply, so the second branch also has a potential difference of 12 V12\,\text{V}12V. The 6 V6\,\text{V}6V distractors incorrectly assume the supply voltage is divided between parallel branches.

Keep going

Next topic6.2.3 Domestic electricityPrevious topic6.2.1 Current, potential difference and resistance

More in Section 6.2 · Physics: Electricity

  1. 6.2.1Current, potential difference and resistanceNotes · 10 questions
  2. 6.2.2Series and parallel circuitsNotes · 10 questions
  3. 6.2.3Domestic electricityNotes · 10 questions
  4. 6.2.4Energy transfers in circuitsNotes · 10 questions

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1Circuit symbols show whether components share one path
  2. 2Current and potential difference follow different rules
  3. 3Adding resistors changes total resistance in opposite ways
  4. 4Bulb brightness depends on how bulbs are connected
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe