Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›6.2 Physics: Electricity
  4. ›6.2.4 Energy transfers in circuits

AQA GCSE Combined Science: Trilogy · Section 6.2 · Physics: Electricity

6.2.4 Energy transfers in circuits

Calculate power and energy transfer in circuits, and explain how appliances transfer and waste energy.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Power describes how quickly energy transfers
  1. 1Power describes how quickly energy transfers
  2. 2Energy transferred depends on time or charge
  3. 3Appliances transfer energy into useful and unwanted forms
  4. 4Reducing unwanted transfers makes devices more efficient
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Power describes how quickly energy transfers

Power is the rate at which energy is transferred. One watt means one joule is transferred each second. In a circuit, power depends on the potential difference across a component and the current through it. Calculate power using P=VIP=VIP=VI, where PPP is in watts, VVV is in volts and III is in amperes.

For example, a lamp with 6 V across it and a current of 2 A has a power of 6×2=12 W6\times2=12\,\mathrm{W}6×2=12W. At the same potential difference, a larger current means more energy transfers each second. Power tells you the transfer rate, not the total energy transferred.

Exam tip

Use the potential difference across the appliance and the current through it. Give power answers in watts.

Key terms · tap one for its definition

Power

Power is the rate of energy transfer, measured in watts.

potential difference

Potential difference is the energy transferred per unit of charge between two points, measured in volts.

current

Current is the rate of flow of electric charge, measured in amperes.

Part 1 done

2

Part 2 of 4: Energy transferred depends on time or charge

Energy transferred is measured in joules. If an appliance runs at constant power, use E=PtE=PtE=Pt. Here, EEE is energy in joules, PPP is power in watts and ttt is time in seconds. Convert minutes to seconds before using this equation.

You can also use E=QVE=QVE=QV, where QQQ is charge in coulombs and VVV is potential difference in volts. This equation gives the energy transferred when charge passes through a potential difference. Choose the equation that matches the quantities given.

Worked example

Finding energy in two ways

An appliance has 12 V across it. A current of 2 A flows for 30 s. Calculate its power and energy transferred. Check the energy using charge.
  1. 1
    P=VI=12×2=24 WP=VI=12\times2=24\,\mathrm{W}P=VI=12×2=24W.
  2. 2
    E=Pt=24×30=720 JE=Pt=24\times30=720\,\mathrm{J}E=Pt=24×30=720J.
  3. 3
    Q=It=2×30=60 CQ=It=2\times30=60\,\mathrm{C}Q=It=2×30=60C.
  4. 4
    E=QV=60×12=720 JE=QV=60\times12=720\,\mathrm{J}E=QV=60×12=720J.

Answer: Power = 24 W. Energy transferred = 720 J.

Key terms · tap one for its definition

Energy transferred

Energy transferred is the amount of energy moved between stores, measured in joules.

charge

Charge is the quantity of electricity flowing through a circuit, measured in coulombs.

Part 2 done

Quick check

One question on the part you just read

Easy

State the equation linking electrical power, voltage and current.
Show answer and explanation

Answer: B · Worked explanation

Electrical power is calculated by multiplying the potential difference across a component by the current through it: P=VIP = V IP=VI. Dividing voltage by current gives resistance, not power, while adding the two quantities does not give a useful electrical power relationship.
3

Part 3 of 4: Appliances transfer energy into useful and unwanted forms

An electrical appliance transfers energy from its electrical supply. The useful transfer depends on its purpose. A heater warms a room, while a motor transfers energy to movement. A lamp transfers energy to light, but it also warms its surroundings.

Some energy is transferred in unwanted transfers. For example, friction warms the moving parts of a motor. Current also warms wires and other components. Energy is not destroyed: it spreads to the surroundings, where it becomes less useful. In a heater, warming the room is useful, not wasted.

Figure 1. Light is the intended output. The lamp also warms its surroundings.

Common mistake

Do not call every transfer to thermal energy wasted. It is useful when heating is the appliance’s purpose.

Key terms · tap one for its definition

useful transfer

A useful transfer moves energy into the form or place needed for a device’s purpose.

unwanted transfers

Unwanted transfers move energy into forms or places that do not serve a device’s purpose.

Part 3 done

4

Part 4 of 4: Reducing unwanted transfers makes devices more efficient

Efficiency compares useful energy transferred with total energy supplied. A more efficient device transfers a greater proportion of its input usefully. It does not create extra energy. To improve efficiency, first identify where unwanted transfers happen.

  • Lubricate moving parts to reduce friction and unwanted heating.
  • Use low-resistance conductors to reduce heating in electrical connections.
  • Insulate heated parts to reduce unwanted energy transfer to other surroundings.
  • Use efficient lamps to reduce unwanted heating while producing light.

The best change depends on the device’s purpose. Thermal insulation helps a water heater retain energy in its water. It would not make a room heater better if it stopped heat reaching the room.

Key terms · tap one for its definition

Efficiency

Efficiency is the proportion of supplied energy transferred usefully.

Thermal insulation

Thermal insulation reduces the rate of energy transfer by heating.

Note read

Check your recall[14 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what power measures and give its unit.

    Show mark schemeHide mark scheme

    Model answer

    Power measures the rate of energy transfer. Its unit is the watt.

    • 1 mark for stating that power is the rate of energy transfer
    • 1 mark for giving watts as the unit
  2. 2.Calculate[2 marks]

    Calculate the power of an appliance with 15 V across it and a current of 2 A.

    Show mark schemeHide mark scheme

    Model answer

    P=VI=15×2=30 WP=VI=15\times2=30\,\mathrm{W}P=VI=15×2=30W.

    • 1 mark for using P=VIP=VIP=VI with the given values
    • 1 mark for calculating 30 W30\,\mathrm{W}30W
  3. 3.Calculate[3 marks]

    Calculate the energy transferred by a 40 W lamp in 3 minutes.

    Show mark schemeHide mark scheme

    Model answer

    Three minutes is 180 s. E=Pt=40×180=7200 JE=Pt=40\times180=7200\,\mathrm{J}E=Pt=40×180=7200J.

    • 1 mark for converting 3 minutes to 180 seconds
    • 1 mark for using E=PtE=PtE=Pt with the correct values
    • 1 mark for calculating 7200 J7200\,\mathrm{J}7200J
  4. 4.Calculate[2 marks]

    Calculate the energy transferred when 50 C of charge passes through a potential difference of 6 V.

    Show mark schemeHide mark scheme

    Model answer

    E=QV=50×6=300 JE=QV=50\times6=300\,\mathrm{J}E=QV=50×6=300J.

    • 1 mark for using E=QVE=QVE=QV with the given values
    • 1 mark for calculating 300 J300\,\mathrm{J}300J
  5. 5.Explain[3 marks]

    Explain why a lamp warms its surroundings and suggest one way to reduce this unwanted transfer.

    Show mark schemeHide mark scheme

    Model answer

    Some electrical energy transfers to thermal energy in the lamp. This warms the surroundings rather than producing useful light. An efficient lamp reduces this unwanted heating.

    • 1 mark for stating that some electrical energy transfers to thermal energy
    • 1 mark for identifying heating rather than light as unwanted for a lamp
    • 1 mark for suggesting an efficient lamp to reduce unwanted heating
  6. 6.Suggest[2 marks]

    Suggest one way to reduce unwanted energy transfers in a motor and explain how it works.

    Show mark schemeHide mark scheme

    Model answer

    Lubricate the moving parts. This reduces friction, so less energy transfers to unwanted heating.

    • 1 mark for suggesting lubrication of moving parts
    • 1 mark for explaining that reduced friction reduces unwanted heating

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Which equation can be used to calculate the energy transferred by an appliance when its power and operating time are known?
Show answer and explanation

Answer: A · Worked explanation

Energy transferred is the power multiplied by the time for which the appliance operates, so E=PtE = P tE=Pt. Dividing power by time does not give energy; it is the product of power and time that gives the transferred energy in joules when power is in watts and time is in seconds.
3.

Easy·Identify[1 mark]

An electric kettle is switched on. Which description best explains how it transfers energy?
Show answer and explanation

Answer: A · Worked explanation

The supply transfers energy electrically to the kettle’s heating element, and the element transfers energy by heating the water. Some energy also warms the kettle and nearby surroundings. The kettle does not create energy; it transfers energy supplied by the electrical circuit.
4.

Easy·Identify[1 mark]

Which change would reduce unwanted energy transfer from a hot electrical appliance to its surroundings?
Show answer and explanation

Answer: C · Worked explanation

Thermal insulation reduces the rate at which energy is transferred from a hot appliance to its surroundings. Leaving it on for longer increases the time over which unwanted transfer can occur, while a larger temperature difference generally increases the rate of heating of the surroundings.
5.

Medium·Calculate[1 mark]

A lamp operates at a potential difference of 12 V12\,\text{V}12V and has a current of 0.50 A0.50\,\text{A}0.50A. Calculate its power.
Show answer and explanation

Answer: D · Worked explanation

Use P=VIP = V IP=VI: P=12 V×0.50 A=6.0 WP = 12\,\text{V} \times 0.50\,\text{A} = 6.0\,\text{W}P=12V×0.50A=6.0W. The tempting value 24 W24\,\text{W}24W comes from dividing the voltage by the current, which is not the power equation.
6.

Medium·Calculate[1 mark]

A 40 W40\,\text{W}40W fan runs for 3 minutes. Calculate the energy it transfers.
Show answer and explanation

Answer: A · Worked explanation

Convert the time to seconds: 3 min=180 s3\,\text{min} = 180\,\text{s}3min=180s. Then E=Pt=40 W×180 s=7,200 JE = P t = 40\,\text{W} \times 180\,\text{s} = 7{,}200\,\text{J}E=Pt=40W×180s=7,200J. The tempting answer 120 J120\,\text{J}120J results from multiplying by 3 without converting minutes to seconds.
7.

Medium·Calculate[1 mark]

A charge of 15 C15\,\text{C}15C passes through a component with a potential difference of 8.0 V8.0\,\text{V}8.0V. Calculate the energy transferred.
Show answer and explanation

Answer: C · Worked explanation

Use E=QVE = Q VE=QV: E=15 C×8.0 V=120 JE = 15\,\text{C} \times 8.0\,\text{V} = 120\,\text{J}E=15C×8.0V=120J. Dividing the charge by the voltage gives approximately 1.9, but energy is found by multiplying charge by potential difference.
8.

Medium·Explain[2 marks]

A phone charger becomes warm while charging a phone. Explain what happens to the energy supplied to the charger.
Show answer and explanation

Answer: B · Worked explanation

The charger transfers energy electrically to the phone, while some energy is dissipated to the surroundings, including as heating of the charger and nearby air. The warm casing is evidence of this unwanted transfer. Energy is not destroyed, and the charger does not obtain its electrical energy from the surroundings.
9.

Medium·Suggest[2 marks]

A small electric motor loses energy as heat from its casing. Suggest one change that would reduce this unwanted transfer to the surroundings.
Show answer and explanation

Answer: B · Worked explanation

A suitable insulating layer reduces the rate at which thermal energy passes from the motor casing to the surroundings. Increasing current can raise the energy transferred and may increase heating, while a thinner casing or greater friction would not reduce the unwanted heating transfer.
10.

Hard·Determine[2 marks]

A heater has a power of 1.2 kW1.2\,\text{kW}1.2kW and operates from a 240 V240\,\text{V}240V supply. Determine the current through it.
Show answer and explanation

Answer: A · Worked explanation

First convert the power to watts: 1.2 kW=1,200 W1.2\,\text{kW} = 1{,}200\,\text{W}1.2kW=1,200W. Rearranging P=VIP = V IP=VI gives I=P/V=1,200 W/240 V=5.0 AI = P/V = 1{,}200\,\text{W}/240\,\text{V} = 5.0\,\text{A}I=P/V=1,200W/240V=5.0A. The tempting value 288 A288\,\text{A}288A comes from multiplying power in kilowatts by voltage instead of rearranging the equation.

Keep going

Next topic6.3.1 Changes of state and densityPrevious topic6.2.3 Domestic electricity

More in Section 6.2 · Physics: Electricity

  1. 6.2.1Current, potential difference and resistanceNotes · 10 questions
  2. 6.2.2Series and parallel circuitsNotes · 10 questions
  3. 6.2.3Domestic electricityNotes · 10 questions
  4. 6.2.4Energy transfers in circuitsNotes · 10 questions

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1Power describes how quickly energy transfers
  2. 2Energy transferred depends on time or charge
  3. 3Appliances transfer energy into useful and unwanted forms
  4. 4Reducing unwanted transfers makes devices more efficient
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe