Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›Edexcel A-level Mathematics
  3. ›M Mechanics
  4. ›M6 Quantities and units in mechanics

Edexcel A-level Mathematics · M · Mechanics

M6 Quantities and units in mechanics

Convert between SI units for length, mass, time and force, identify base and derived quantities, and use correct units in mechanics problems.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Mechanics is built from three base quantities
  1. 1Mechanics is built from three base quantities
  2. 2Derived quantities combine base quantities into compound units
  3. 3Conversion factors change units without changing the quantity
  4. 4Compound units convert one part at a time
  5. 5Consistent units keep every mechanics calculation correct
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Mechanics is built from three base quantities

A statement such as ‘the car is fast’ means little without numbers and units. Every mechanics measurement is made from a few basic ones. A base quantity is one defined on its own, not through other quantities. In mechanics these are length, mass and time.

Each has a standard unit in the SI unit system. Length is measured in metres (m), mass in kilograms (kg) and time in seconds (s). These are the base units. Using them keeps every calculation consistent.

Exam tip

Always write the unit with the number. A bare 12 could mean 12 m, 12 kg or 12 s.

Key terms · tap one for its definition

base quantity

A base quantity is a physical quantity defined independently of others; in mechanics the base quantities are length, mass and time.

SI unit

An SI unit is a unit from the international system of units, such as the metre, kilogram, second or newton.

Part 1 done

2

Part 2 of 5: Derived quantities combine base quantities into compound units

Speed is not on that list, because it depends on both length and time. A derived quantity is built by multiplying or dividing base quantities. Velocity is length divided by time, so its unit is m s−1\mathrm{m\,s^{-1}}ms−1.

Acceleration is change in velocity divided by time, giving m s−2\mathrm{m\,s^{-2}}ms−2. Force follows from F=maF=maF=ma, so its unit is kg m s−2\mathrm{kg\,m\,s^{-2}}kgms−2. This combination has its own name: one newton (N).

Common derived quantities in mechanics

QuantitySymbolSI unit
Velocityvvvm s−1\mathrm{m\,s^{-1}}ms−1
Accelerationaaam s−2\mathrm{m\,s^{-2}}ms−2
ForceFFFN=kg m s−2\mathrm{N}=\mathrm{kg\,m\,s^{-2}}N=kgms−2
Quantity
Velocity
Symbol
vvv
SI unit
m s−1\mathrm{m\,s^{-1}}ms−1
Quantity
Acceleration
Symbol
aaa
SI unit
m s−2\mathrm{m\,s^{-2}}ms−2
Quantity
Force
Symbol
FFF
SI unit
N=kg m s−2\mathrm{N}=\mathrm{kg\,m\,s^{-2}}N=kgms−2

Weight is the gravitational force on a body, so W=mgW=mgW=mg is measured in newtons. Take g=9.8 m s−2g=9.8\,\mathrm{m\,s^{-2}}g=9.8ms−2. Mass is measured in kilograms, but weight is measured in newtons.

Key terms · tap one for its definition

derived quantity

A derived quantity is a quantity obtained by multiplying or dividing base quantities, so its unit is a combination of base units.

newton

The newton (N) is the SI unit of force: the force that gives a mass of 1 kg an acceleration of 1 m s−21\,\mathrm{m\,s^{-2}}1ms−2.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the SI unit of mass.
Show answer and explanation

Answer: B · Worked explanation

The SI unit of mass is the kilogram. The gram is a smaller unit that must be converted to kilograms. The newton is the unit of force, not mass, and the tonne is a larger non-SI unit of 1000 kg.
3

Part 3 of 5: Conversion factors change units without changing the quantity

Real problems often give data in units that are not SI. A conversion factor is a ratio that equals 1, such as 1000 m1 km\frac{1000\,\mathrm{m}}{1\,\mathrm{km}}1km1000m​. Multiplying by it changes the unit but not the size of the quantity.

Common conversions to SI units

QuantityGiven unitEquals
Length1 km1000 m
Length1 cm0.01 m
Mass1 g0.001 kg
Mass1 tonne1000 kg
Time1 minute60 s
Time1 hour3600 s
Quantity
Length
Given unit
1 km
Equals
1000 m
Quantity
Length
Given unit
1 cm
Equals
0.01 m
Quantity
Mass
Given unit
1 g
Equals
0.001 kg
Quantity
Mass
Given unit
1 tonne
Equals
1000 kg
Quantity
Time
Given unit
1 minute
Equals
60 s
Quantity
Time
Given unit
1 hour
Equals
3600 s

Moving to a smaller unit makes the number larger. Moving to a larger unit makes it smaller. Convert before substituting into any formula. Time conversions are not decimal, because there are 60 seconds in a minute and 3600 in an hour. Write each factor with its units so you can see them cancel.

Worked example

Converting to SI units

Convert 2.4 km to metres, 350 g to kilograms and 3 minutes to seconds.
  1. 1
    Length: 2.4×1000=24002.4\times1000=24002.4×1000=2400 m.
  2. 2
    Mass: 350×0.001=0.350350\times0.001=0.350350×0.001=0.350 kg.
  3. 3
    Time: 3×60=1803\times60=1803×60=180 s.

Answer: 2.4 km=2400 m2.4\,\mathrm{km}=2400\,\mathrm{m}2.4km=2400m, 350 g=0.350 kg350\,\mathrm{g}=0.350\,\mathrm{kg}350g=0.350kg and 3 min=180 s3\,\mathrm{min}=180\,\mathrm{s}3min=180s.

Key term

conversion factor

A conversion factor is a ratio of equal quantities in different units, equal to 1, used to change the unit of a quantity.

Part 3 done

4

Part 4 of 5: Compound units convert one part at a time

Speeds are often given in kilometres per hour, but mechanics works in metres per second. Convert the top and bottom of a compound unit separately. Here 1 km=1000 m1\,\mathrm{km}=1000\,\mathrm{m}1km=1000m and 1 h=3600 s1\,\mathrm{h}=3600\,\mathrm{s}1h=3600s.

So 1 km h−1=10003600 m s−1=13.6 m s−11\,\mathrm{km\,h^{-1}}=\frac{1000}{3600}\,\mathrm{m\,s^{-1}}=\frac{1}{3.6}\,\mathrm{m\,s^{-1}}1kmh−1=36001000​ms−1=3.61​ms−1. Divide by 3.6 to go from km h−1\mathrm{km\,h^{-1}}kmh−1 to m s−1\mathrm{m\,s^{-1}}ms−1. Multiply by 3.6 to go back. Write the units in every line of working. Seeing them cancel shows whether you multiplied or divided correctly.

Worked example

Converting a speed

Convert 72 km h−172\,\mathrm{km\,h^{-1}}72kmh−1 to m s−1\mathrm{m\,s^{-1}}ms−1.
  1. 1
    Convert distance: 72 km=72×1000=72 000 m72\,\mathrm{km}=72\times1000=72\,000\,\mathrm{m}72km=72×1000=72000m.
  2. 2
    Convert time: 1 h=3600 s1\,\mathrm{h}=3600\,\mathrm{s}1h=3600s.
  3. 3
    Divide: 72 0003600=20\frac{72\,000}{3600}=20360072000​=20.

Answer: 72 km h−1=20 m s−172\,\mathrm{km\,h^{-1}}=20\,\mathrm{m\,s^{-1}}72kmh−1=20ms−1.

Common mistake

Do not multiply by 3.6 when converting to m s−1\mathrm{m\,s^{-1}}ms−1. The number must get smaller, because metres per second is the larger unit.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the quantity that is a derived quantity rather than a base quantity.
Show answer and explanation

Answer: C · Worked explanation

Length, mass and time are the base quantities in mechanics. Force is derived, because F=maF=maF=ma combines mass with acceleration, which itself combines length and time. Its unit, the newton, is therefore built from base units.
5

Part 5 of 5: Consistent units keep every mechanics calculation correct

Conversions matter most when you substitute into a formula. Convert every quantity to SI units first. Then the answer comes out in SI units too.

For F=maF=maF=ma, mass in kilograms and acceleration in m s−2\mathrm{m\,s^{-2}}ms−2 give force in newtons. Afterwards, check the unit of your answer. If it does not match the quantity you wanted, an earlier step has gone wrong. Using 1.2 for a mass in tonnes, instead of 1200 kg, makes a force wrong by a factor of 1000.

Worked example

Force from a mass in tonnes

A car has mass 1.2 tonnes and acceleration 2.5 m s−22.5\,\mathrm{m\,s^{-2}}2.5ms−2. Calculate the force acting on it.
  1. 1
    Convert the mass: 1.2×1000=12001.2\times1000=12001.2×1000=1200 kg.
  2. 2
    Use force = mass ×\times× acceleration, so F=maF=maF=ma.
  3. 3
    Substitute: F=1200×2.5=3000F=1200\times2.5=3000F=1200×2.5=3000 N.

Answer: The force is 3.0×103 N3.0\times10^{3}\,\mathrm{N}3.0×103N.

Exam tip

Show each conversion as its own line and state the unit on every answer.

Note read

Check your recall[13 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[3 marks]

    State the SI base units for length, mass and time.

    Show mark schemeHide mark scheme

    Model answer

    Length is measured in metres (m), mass in kilograms (kg) and time in seconds (s).

    • 1 mark for stating metre (m) for length
    • 1 mark for stating kilogram (kg) for mass
    • 1 mark for stating second (s) for time
  2. 2.Explain[2 marks]

    Explain why the newton is a derived unit, and give it in terms of base units.

    Show mark schemeHide mark scheme

    Model answer

    Force is found from F=maF=maF=ma, which combines mass with acceleration, so its unit is built from base units. One newton is 1 kg m s−21\,\mathrm{kg\,m\,s^{-2}}1kgms−2.

    • 1 mark for explaining that force combines base quantities through mass times acceleration
    • 1 mark for giving the newton as kg m s−2\mathrm{kg\,m\,s^{-2}}kgms−2
  3. 3.Calculate[2 marks]

    Calculate 90 km h−190\,\mathrm{km\,h^{-1}}90kmh−1 in m s−1\mathrm{m\,s^{-1}}ms−1.

    Show mark schemeHide mark scheme

    Model answer

    90×10003600=25 m s−1\frac{90\times1000}{3600}=25\,\mathrm{m\,s^{-1}}360090×1000​=25ms−1.

    • 1 mark for converting kilometres to metres and hours to seconds, or dividing by 3.6
    • 1 mark for obtaining 25 m s−125\,\mathrm{m\,s^{-1}}25ms−1
  4. 4.Calculate[3 marks]

    Calculate the force on a body of mass 800 g with acceleration 3 m s−23\,\mathrm{m\,s^{-2}}3ms−2.

    Show mark schemeHide mark scheme

    Model answer

    Mass =0.800=0.800=0.800 kg. Force = mass ×\times× acceleration, so F=ma=0.800×3=2.4F=ma=0.800\times3=2.4F=ma=0.800×3=2.4 N.

    • 1 mark for converting 800 g to 0.800 kg
    • 1 mark for using F=maF=maF=ma with consistent units
    • 1 mark for obtaining 2.4 N with the correct unit
  5. 5.State[1 mark]

    State the SI unit of acceleration in terms of base units.

    Show mark schemeHide mark scheme

    Model answer

    The unit is m s−2\mathrm{m\,s^{-2}}ms−2.

    • 1 mark for stating m s−2\mathrm{m\,s^{-2}}ms−2
  6. 6.Calculate[2 marks]

    Calculate the weight of a body of mass 6.0 kg. Use g=9.8 m s−2g=9.8\,\mathrm{m\,s^{-2}}g=9.8ms−2 and give your answer to 2 significant figures.

    Show mark schemeHide mark scheme

    Model answer

    W=mg=6.0×9.8=58.8≈59W=mg=6.0\times9.8=58.8\approx59W=mg=6.0×9.8=58.8≈59 N.

    • 1 mark for using W=mgW=mgW=mg with the given values
    • 1 mark for obtaining 59 N

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the expression that equals one newton in base units.
Show answer and explanation

Answer: A · Worked explanation

From F=maF=maF=ma, force has units kg multiplied by m s−2\mathrm{m\,s^{-2}}ms−2, giving kg m s−2\mathrm{kg\,m\,s^{-2}}kgms−2. The expression with m s−1\mathrm{m\,s^{-1}}ms−1 omits one factor of time, and the one with m2\mathrm{m^{2}}m2 has an extra factor of length. Only kg m s−2\mathrm{kg\,m\,s^{-2}}kgms−2 matches mass times acceleration.
4.

Medium·Calculate[1 mark]

Calculate the mass in kilograms of an object of 0.35 tonnes.
Show answer and explanation

Answer: D · Worked explanation

One tonne is 1000 kg, so 0.35×1000=3500.35\times1000=3500.35×1000=350 kg. The value 35 kg multiplies by 100 and 3500 kg multiplies by 10000. The value 0.00035 kg divides by 1000, which wrongly treats the tonne as the smaller unit.
5.

Medium·Calculate[1 mark]

Calculate 36 km h−136\,\mathrm{km\,h^{-1}}36kmh−1 in m s−1\mathrm{m\,s^{-1}}ms−1.
Show answer and explanation

Answer: C · Worked explanation

Divide by 3.6: 36×10003600=10\frac{36\times1000}{3600}=10360036×1000​=10. The value 129.6 comes from multiplying by 3.6 instead of dividing. The value 36 000 converts kilometres to metres but forgets to convert hours to seconds. The value 600 divides by 60 instead of 3600.
6.

Medium·Calculate[2 marks]

A body has mass 400 g and acceleration 5 m s−25\,\mathrm{m\,s^{-2}}5ms−2. Calculate the force on it.
Show answer and explanation

Answer: B · Worked explanation

Convert first: 400 g=0.400 kg400\,\mathrm{g}=0.400\,\mathrm{kg}400g=0.400kg. Then F=ma=0.400×5=2.0F=ma=0.400\times5=2.0F=ma=0.400×5=2.0 N. The value 2000 comes from using 400 without converting to kilograms, so the answer would not be in newtons. The value 80 comes from dividing 400 by 5, which does not use F=maF=maF=ma.
7.

Medium·Calculate[2 marks]

A runner covers 3 km in 20 minutes at constant speed. Calculate the speed in m s−1\mathrm{m\,s^{-1}}ms−1.
Show answer and explanation

Answer: A · Worked explanation

Convert: 3 km=3000 m3\,\mathrm{km}=3000\,\mathrm{m}3km=3000m and 20 min=1200 s20\,\mathrm{min}=1200\,\mathrm{s}20min=1200s. Then 30001200=2.5\frac{3000}{1200}=2.512003000​=2.5. The value 0.15 is the speed in kilometres per minute, and 150 is the speed in metres per minute. Seconds, not minutes, are needed for SI units, so both conversions are required.
8.

Hard·Calculate[2 marks]

A van of mass 2.4 tonnes is acted on by a force of 6000 N. Calculate its acceleration in m s−2\mathrm{m\,s^{-2}}ms−2.
Show answer and explanation

Answer: D · Worked explanation

Convert the mass: 2.4 tonnes=2400 kg2.4\,\mathrm{tonnes}=2400\,\mathrm{kg}2.4tonnes=2400kg. Then a=Fm=60002400=2.5a=\frac{F}{m}=\frac{6000}{2400}=2.5a=mF​=24006000​=2.5. The value 2500 comes from dividing by 2.4 without converting tonnes to kilograms. The value 0.40 inverts the fraction, and 0.00040 inverts it while also using tonnes. Check that the answer has a sensible size.
9.

Hard·Identify[2 marks]

A body has mass mmm in kg, speed vvv in m s−1\mathrm{m\,s^{-1}}ms−1 and time ttt in s. Identify the expression that has the units of force.
Show answer and explanation

Answer: B · Worked explanation

Check the units: mvt\frac{mv}{t}tmv​ gives kg m s−1s=kg m s−2\frac{\mathrm{kg\,m\,s^{-1}}}{\mathrm{s}}=\mathrm{kg\,m\,s^{-2}}skgms−1​=kgms−2, which is a newton. The expression mvmvmv has units kg m s−1\mathrm{kg\,m\,s^{-1}}kgms−1, which is one factor of time short. The expression mv2mv^2mv2 has an extra factor of m s−1\mathrm{m\,s^{-1}}ms−1 and is not a force. The expression mt\frac{m}{t}tm​ has units kg s−1\mathrm{kg\,s^{-1}}kgs−1.
10.

Hard·Calculate[2 marks]

A car accelerates uniformly from rest to 72 km h−172\,\mathrm{km\,h^{-1}}72kmh−1 in 5 s. Calculate its acceleration in m s−2\mathrm{m\,s^{-2}}ms−2.
Show answer and explanation

Answer: C · Worked explanation

Convert the speed: 72 km h−1=20 m s−172\,\mathrm{km\,h^{-1}}=20\,\mathrm{m\,s^{-1}}72kmh−1=20ms−1. Then a=205=4.0a=\frac{20}{5}=4.0a=520​=4.0. The value 14.4 divides 72 by 5 without converting the speed. The value 51.8 multiplies by 3.6 instead of dividing. The value 0.80 divides the acceleration by 5 a second time.

Keep going

Next topicM7 KinematicsPrevious topicS5 Hypothesis testing

More in M · Mechanics

  1. M6Quantities and units in mechanicsNotes · 10 questions
  2. M7KinematicsNotes · 10 questions
  3. M8Forces and Newton's lawsNotes · 10 questions
  4. M9MomentsNotes · 10 questions

All Edexcel A-level Mathematics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by Pearson Edexcel or any exam board.

On this page

0/5 read

  1. 1Mechanics is built from three base quantities
  2. 2Derived quantities combine base quantities into compound units
  3. 3Conversion factors change units without changing the quantity
  4. 4Compound units convert one part at a time
  5. 5Consistent units keep every mechanics calculation correct
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe