Edexcel A-level Mathematics · M · Mechanics
M8 Forces and Newton's laws
Draw force diagrams, apply Newton’s first and second laws, distinguish weight from mass, and resolve forces on an inclined plane.
1/6A force diagram shows every force acting on one object
- A force diagram shows every force acting on one object
- Zero resultant force means no change in velocity
- Resultant force equals mass times acceleration
- Mass stays fixed but weight depends on gravity
- On a slope, resolve forces along and across it
- Friction opposes sliding and is limited by the normal reaction
- Check your recall
- Practice: 10 questions
Part 1 of 6: A force diagram shows every force acting on one object
A book rests on a table. Gravity pulls it down and the table pushes it up. A force is a push or pull, and it has both size and direction.
The table’s push is the normal reaction, . It acts at right angles to the surface. When several forces act, their resultant force is the single force with the same effect as all of them together.
- Draw the object as a box or a dot.
- Draw the weight straight down.
- Add contact forces, with at right angles to the surface.
- Add other forces, such as friction (which opposes sliding) or a driving force.
- Label every force and mark a positive direction.
Key terms · tap one for its definition
force
A force is a push or pull on an object, with size and direction, measured in newtons ().
normal reaction
The normal reaction is the contact force from a surface on an object, acting perpendicular to the surface.
resultant force
The resultant force is the single force with the same effect as all the forces acting on an object, found by adding them with direction.
Part 2 of 6: Zero resultant force means no change in velocity
Now that forces can be added, we can look at what happens when they balance. Newton’s first law says an object keeps its velocity unless a resultant force acts on it. With zero resultant force, it stays at rest or moves at constant velocity. The object is then in equilibrium.
A book on a table is in equilibrium, so . A car cruising at constant speed on a straight road is also in equilibrium. Its driving force equals the total resistance.
This works in every direction separately. Forces up must equal forces down, and forces left must equal forces right.
Key term
equilibrium
An object is in equilibrium when the resultant force on it is zero, so its acceleration is zero.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: B · Worked explanation
Part 3 of 6: Resultant force equals mass times acceleration
Unbalanced forces change velocity, and Newton’s second law says by how much. The acceleration is proportional to the resultant force and inversely proportional to the mass. In symbols, , where is the resultant force, is the mass and is the acceleration.
The acceleration points in the direction of the resultant force. Add forces along the direction of motion and subtract those against it. Use mass in kilograms and acceleration in . The newton is the unit of force that results.
Worked example
A car accelerating
- Resultant force = driving force − resistance .
- Resultant force = mass × acceleration, so and .
- Substitute: .
Answer: The acceleration is in the direction of the driving force.
Key term
newton
A newton is the force that gives a mass of 1 kg an acceleration of .
Part 4 of 6: Mass stays fixed but weight depends on gravity
Newton’s second law also explains weight. Mass is the amount of matter in an object, and it stays the same everywhere. Weight is the gravitational force on the object. An astronaut keeps the same mass on the Moon but has a smaller weight, because gravity there is weaker.
Mass compared with weight
- Feature
- Unit
- Mass
- kilogram
- Weight
- newton
- Feature
- Changes with location?
- Mass
- No
- Weight
- Yes
- Feature
- Direction
- Mass
- None
- Weight
- Vertically downwards
Weight follows from with . So , where near the Earth’s surface. Always convert mass to kilograms first. Kilograms measure mass, and newtons measure weight. Mass has no direction, but weight acts vertically downwards.
Worked example
A lift accelerating upwards
- Weight downwards.
- The resultant force upwards is .
- Use : .
- So .
Answer: The force in the cable is .
Key terms · tap one for its definition
mass
Mass is the amount of matter in an object, measured in kilograms (), and it does not depend on location.
weight
Weight is the gravitational force on an object, , measured in newtons () and acting vertically downwards.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: B · Worked explanation
Part 5 of 6: On a slope, resolve forces along and across it
Many problems involve a slope, where forces no longer line up with horizontal and vertical. Split a force into perpendicular components to deal with this. A force at angle to a chosen direction has component along it and across it.
Take a plane at angle to the horizontal. The weight then has component down the slope and into it.
Across the slope there is no acceleration, so . On a smooth plane, which has no friction, the resultant force along the slope is .
Worked example
A block on a smooth slope
- Along the slope: .
- So .
- Across the slope: .
Answer: The acceleration is down the slope and .
Key term
component
A component of a force is its effect in a chosen direction; for a force at angle to that direction it is .
Part 6 of 6: Friction opposes sliding and is limited by the normal reaction
So far the plane has been smooth. Real surfaces resist sliding. Friction is a force along the surface. It acts up the slope when an object moves, or tends to move, down it.
Friction has a limit. Its size satisfies , where the coefficient of friction depends on the two surfaces. When sliding is about to start, .
Key terms · tap one for its definition
friction
Friction is a contact force parallel to the surfaces that opposes sliding between them.
coefficient of friction
The coefficient of friction is the constant in when sliding is about to start; it has no units.
Check your recall[14 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.State[2 marks]
State Newton’s first law.
Show mark schemeHide mark scheme
Model answer
An object stays at rest, or keeps moving at constant velocity, unless a resultant force acts on it.
- 1 mark for stating that an object at rest stays at rest or one moving keeps constant velocity
- 1 mark for stating that this happens when the resultant force is zero (no resultant force acts)
- 2.Calculate[3 marks]
Calculate the acceleration of a cyclist and bicycle of total mass 90 kg when the driving force is 420 N and the total resistance is 60 N.
Show mark schemeHide mark scheme
Model answer
Resultant force . Then .
- 1 mark for finding the resultant force
- 1 mark for using with
- 1 mark for obtaining
- 3.Explain[2 marks]
Explain the difference between mass and weight.
Show mark schemeHide mark scheme
Model answer
Mass is the amount of matter, measured in kilograms, and it does not change with location. Weight is the gravitational force on the object, measured in newtons, and it depends on the strength of gravity.
- 1 mark for stating that mass is the amount of matter in kilograms and does not change with location
- 1 mark for stating that weight is a gravitational force in newtons that depends on gravity
- 4.Calculate[2 marks]
Calculate the weight of a 15 kg object. Take .
Show mark schemeHide mark scheme
Model answer
.
- 1 mark for using with and
- 1 mark for obtaining
- 5.Determine[3 marks]
Determine the force, parallel to the slope, needed to hold a 6.0 kg block at rest on a smooth plane at to the horizontal. Take .
Show mark schemeHide mark scheme
Model answer
The holding force equals the component of weight down the slope: .
- 1 mark for identifying the component of weight down the slope as
- 1 mark for substituting , and
- 1 mark for obtaining about
- 6.Explain[2 marks]
Explain why the normal reaction on a smooth slope is less than the weight of the object.
Show mark schemeHide mark scheme
Model answer
Only the component of the weight into the slope, , is balanced by . This is smaller than because is less than 1 for a slope.
- 1 mark for stating that balances only the component of weight perpendicular to the slope,
- 1 mark for stating that is smaller than (the rest of the weight acts along the slope)

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyIdentify[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: C · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: B · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: C · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: B · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: B · Worked explanation
HardCalculate[2 marks]
Show answer and explanation
Answer: D · Worked explanation