Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›Edexcel A-level Mathematics
  3. ›M Mechanics
  4. ›M9 Moments

Edexcel A-level Mathematics · M · Mechanics

M9 Moments

Calculate the moment of a force, find the resultant moment of several forces, and use the principle of moments for bodies in equilibrium.

  • 5 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A moment measures the turning effect of a force
  1. 1A moment measures the turning effect of a force
  2. 2A force at an angle has a smaller turning effect
  3. 3Opposite turning directions need opposite signs
  4. 4Equilibrium needs zero resultant force and zero resultant moment
  5. 5Take moments about the point where an unknown force acts
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A moment measures the turning effect of a force

Pushing a door close to its hinges is hard, while pushing near the handle is easy. The hinge is a pivot, a fixed point about which the door can turn. The turning effect depends on both the force and its distance from the pivot.

This turning effect is the moment of the force. For a force FFF at perpendicular distance ddd from the pivot, M=FdM=FdM=Fd. The unit is the newton metre, N m\mathrm{N\,m}Nm.

Worked example

A spanner

A force of 40 N acts at right angles to a spanner, 0.25 m from the nut. Calculate its moment about the nut.
  1. 1
    Moment = force × perpendicular distance.
  2. 2
    M=FdM=FdM=Fd.
  3. 3
    M=40×0.25=10M=40\times0.25=10M=40×0.25=10.

Answer: The moment is 10 N m10\,\mathrm{N\,m}10Nm.

Exam tip

Write the unit as N m\mathrm{N\,m}Nm and state the point you take moments about. A moment has no meaning without its point.

Key terms · tap one for its definition

pivot

A pivot is a fixed point about which an object can turn.

moment

The moment of a force about a point is the force multiplied by its perpendicular distance from that point, measured in N m\mathrm{N\,m}Nm.

perpendicular distance

The perpendicular distance is the shortest distance from the point to the line along which the force acts.

Part 1 done

2

Part 2 of 5: A force at an angle has a smaller turning effect

In the spanner example the force was at right angles to the handle. Often it is not. Suppose a force FFF acts at a point ddd along a rod from the pivot. It makes angle θ\thetaθ with the rod. Only the component Fsin⁡θF\sin\thetaFsinθ, at right angles to the rod, turns it.

Worked example

A force at an angle

A force of 50 N acts at 30∘30^{\circ}30∘ to a rod, at a point 0.80 m from the pivot. Find the moment about the pivot.
  1. 1
    The component at right angles to the rod is 50sin⁡30∘=25 N50\sin30^{\circ}=25\,\mathrm{N}50sin30∘=25N.
  2. 2
    Use M=Fdsin⁡θM=Fd\sin\thetaM=Fdsinθ with d=0.80 md=0.80\,\mathrm{m}d=0.80m.
  3. 3
    M=25×0.80=20M=25\times0.80=20M=25×0.80=20.

Answer: The moment is 20 N m20\,\mathrm{N\,m}20Nm.

A force whose line passes through the pivot has zero moment, because its perpendicular distance is zero.

Common mistake

Do not measure the distance along the rod when the force is not at right angles to it. Use the perpendicular distance, or resolve the force.

Part 2 done

Quick check

One question on the part you just read

Easy

State the unit of the moment of a force.
Show answer and explanation

Answer: D · Worked explanation

A moment is force multiplied by perpendicular distance, so multiplying newtons by metres gives the newton metre, N m\mathrm{N\,m}Nm. The unit N\mathrm{N}N alone is the unit of force. The unit N m−1\mathrm{N\,m^{-1}}Nm−1 would arise from dividing force by distance instead of multiplying.
3

Part 3 of 5: Opposite turning directions need opposite signs

Real problems involve several forces, some turning one way and some the other. Choose one direction as positive, usually anticlockwise, and state it. The resultant moment about a point is the sum of the signed moments. A negative total means a net clockwise turn.

To find a direction, picture the point as a pivot. A force pushing the right-hand side down turns the body clockwise. A force pushing the left-hand side down turns it anticlockwise. Always add moments about the same point, because different points give different totals.

Worked example

Several forces about a point

Forces act on a rod about point O. An upward 12 N force is 0.5 m to the right of O. A downward 8 N force is 1.5 m to the right. A downward 5 N force is 0.4 m to the left. Ignore the weight of the rod and find the resultant moment about O.
  1. 1
    Take anticlockwise as positive.
  2. 2
    The upward 12 N force on the right turns anticlockwise: +12×0.5=+6.0+12\times0.5=+6.0+12×0.5=+6.0.
  3. 3
    The downward 8 N force on the right turns clockwise: −8×1.5=−12-8\times1.5=-12−8×1.5=−12.
  4. 4
    The downward 5 N force on the left turns anticlockwise: +5×0.4=+2.0+5\times0.4=+2.0+5×0.4=+2.0.
  5. 5
    Add them: 6.0−12+2.0=−4.06.0-12+2.0=-4.06.0−12+2.0=−4.0.

Answer: The resultant moment is 4.0 N m4.0\,\mathrm{N\,m}4.0Nm clockwise.

Key term

resultant moment

The resultant moment about a point is the sum of the moments of all the forces about it, with clockwise and anticlockwise opposite in sign.

Part 3 done

4

Part 4 of 5: Equilibrium needs zero resultant force and zero resultant moment

A balanced seesaw neither accelerates nor turns. Both the resultant force and the resultant moment are zero. The principle of moments then applies: clockwise and anticlockwise moments about any point are equal. The point is yours to choose.

Figure 1. A downward force acts on each side of the pivot, and each distance is measured from the pivot.

A uniform beam has the same thickness and density all along it, so its weight acts at its midpoint. This point is the centre of mass. A light beam has negligible weight, so you can ignore it.

Exam tip

For a uniform beam, mark the weight at the midpoint, even when the support is somewhere else.

Key terms · tap one for its definition

principle of moments

The principle of moments states that, in equilibrium, the total clockwise moment about any point equals the total anticlockwise moment about it.

centre of mass

The centre of mass is the point through which the whole weight of a body may be taken to act.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the force that has zero moment about a point.
Show answer and explanation

Answer: C · Worked explanation

When the line of the force passes through the point, the perpendicular distance is zero, so M=FdM=FdM=Fd gives zero. A force at right angles to the rod gives the largest moment for its size, not zero. A small force or a distant force still has a moment, because neither makes the distance zero.
5

Part 5 of 5: Take moments about the point where an unknown force acts

Beam problems usually contain unknown reaction forces. A good method removes them one at a time. Check each answer by taking moments about a different point.

  • Draw all the forces, with the weight at the centre of mass.
  • Choose a point where an unknown force acts, so that force has zero moment.
  • Set the clockwise moments equal to the anticlockwise moments.
  • Resolve vertically, with upward forces equal to downward forces, to find the rest.

A support that is about to lose contact with the beam has zero reaction. This condition gives the limit before the beam tilts.

Worked example

A beam on two supports

A uniform beam AB has length 6.00 m and weight 196 N. It rests horizontally on supports at A and at C, where AC = 4.00 m. Find the reactions at A and C.
  1. 1
    The weight acts at the midpoint, 3.00 m from A.
  2. 2
    Take moments about A, where RAR_\mathrm{A}RA​ has zero moment: RC×4.00=196×3.00R_\mathrm{C}\times4.00=196\times3.00RC​×4.00=196×3.00.
  3. 3
    So RC=5884.00=147 NR_\mathrm{C}=\frac{588}{4.00}=147\,\mathrm{N}RC​=4.00588​=147N.
  4. 4
    Resolve vertically: RA+RC=196R_\mathrm{A}+R_\mathrm{C}=196RA​+RC​=196, so RA=49.0 NR_\mathrm{A}=49.0\,\mathrm{N}RA​=49.0N.

Answer: RA=49.0 NR_\mathrm{A}=49.0\,\mathrm{N}RA​=49.0N and RC=147 NR_\mathrm{C}=147\,\mathrm{N}RC​=147N.

Note read

Check your recall[14 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the formula for the moment of a force about a point, and give the unit of moment.

    Show mark schemeHide mark scheme

    Model answer

    M=FdM=FdM=Fd, where ddd is the perpendicular distance from the point to the force. The unit is N m\mathrm{N\,m}Nm.

    • 1 mark for stating M=FdM=FdM=Fd with ddd as the perpendicular distance
    • 1 mark for giving the unit as N m\mathrm{N\,m}Nm
  2. 2.Calculate[2 marks]

    Calculate the moment of an 18 N force acting at right angles to a rod, 0.50 m from the pivot.

    Show mark schemeHide mark scheme

    Model answer

    M=Fd=18×0.50=9.0 N mM=Fd=18\times0.50=9.0\,\mathrm{N\,m}M=Fd=18×0.50=9.0Nm.

    • 1 mark for using M=FdM=FdM=Fd with F=18F=18F=18 and d=0.50d=0.50d=0.50
    • 1 mark for obtaining 9.0 N m9.0\,\mathrm{N\,m}9.0Nm
  3. 3.Calculate[3 marks]

    Calculate the moment about the pivot of a 60 N force acting at 30∘30^{\circ}30∘ to a rod, at a point 0.50 m along the rod from the pivot.

    Show mark schemeHide mark scheme

    Model answer

    The component at right angles to the rod is 60sin⁡30∘=30 N60\sin30^{\circ}=30\,\mathrm{N}60sin30∘=30N. So M=30×0.50=15 N mM=30\times0.50=15\,\mathrm{N\,m}M=30×0.50=15Nm.

    • 1 mark for finding the perpendicular component 60sin⁡30∘=30 N60\sin30^{\circ}=30\,\mathrm{N}60sin30∘=30N
    • 1 mark for multiplying by the distance 0.50 m0.50\,\mathrm{m}0.50m
    • 1 mark for obtaining 15 N m15\,\mathrm{N\,m}15Nm
  4. 4.State[2 marks]

    State the principle of moments.

    Show mark schemeHide mark scheme

    Model answer

    For a body in equilibrium, the total clockwise moment about any point equals the total anticlockwise moment about that point.

    • 1 mark for stating that it applies to a body in equilibrium
    • 1 mark for stating that clockwise moments equal anticlockwise moments about any point
  5. 5.Determine[3 marks]

    Determine the distance from the pivot at which a downward 50 N force must act on the right to balance a light rod, when a downward 80 N force acts 1.5 m to the left of the pivot.

    Show mark schemeHide mark scheme

    Model answer

    Anticlockwise moment =80×1.5=120 N m=80\times1.5=120\,\mathrm{N\,m}=80×1.5=120Nm. Clockwise moment =50d=50d=50d. Setting them equal gives d=12050=2.4 md=\frac{120}{50}=2.4\,\mathrm{m}d=50120​=2.4m.

    • 1 mark for calculating the moment 80×1.5=120 N m80\times1.5=120\,\mathrm{N\,m}80×1.5=120Nm
    • 1 mark for equating clockwise and anticlockwise moments, 50d=12050d=12050d=120
    • 1 mark for obtaining d=2.4 md=2.4\,\mathrm{m}d=2.4m
  6. 6.Explain[2 marks]

    Explain why the weight of a uniform beam can be taken to act at its midpoint.

    Show mark schemeHide mark scheme

    Model answer

    The weight of a uniform beam is spread evenly along its length. Its centre of mass is therefore at the midpoint, and the whole weight may be taken to act there.

    • 1 mark for stating that the weight is spread evenly along the beam
    • 1 mark for stating that the centre of mass is at the midpoint, where the whole weight may be taken to act

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Calculate[1 mark]

Calculate the moment of a 20 N force acting at right angles at 0.30 m from a pivot.
Show answer and explanation

Answer: B · Worked explanation

The force is perpendicular to the line to the pivot, so no resolving is needed. The moment is M=Fd=20×0.30=6.0 N mM=Fd=20\times0.30=6.0\,\mathrm{N\,m}M=Fd=20×0.30=6.0Nm. The value 67 comes from dividing the force by the distance instead of multiplying. The value 20 is just the size of the force, which ignores the distance from the pivot.
4.

Medium·Calculate[2 marks]

A 40 N force acts at 30∘30^{\circ}30∘ to a rod, at a point 1.5 m from the pivot. Calculate its moment about the pivot.
Show answer and explanation

Answer: C · Worked explanation

Resolve the force first, then multiply by the distance. The component at right angles to the rod is 40sin⁡30∘=20 N40\sin30^{\circ}=20\,\mathrm{N}40sin30∘=20N, so M=20×1.5=30 N mM=20\times1.5=30\,\mathrm{N\,m}M=20×1.5=30Nm. The value 52 uses 40cos⁡30∘40\cos30^{\circ}40cos30∘, which is the component along the rod and has no turning effect. The value 60 ignores the angle.
5.

Medium·Determine[2 marks]

About point O, a 10 N downward force acts 2.0 m to the right, a 6.0 N upward force acts 1.0 m to the right, and a 4.0 N downward force acts 3.0 m to the left. Determine the resultant moment about O.
Show answer and explanation

Answer: B · Worked explanation

The 10 N force gives 20 N m clockwise. The 6.0 N force gives 6.0 N m anticlockwise and the 4.0 N force gives 12 N m anticlockwise. Net: 20 clockwise against 18 anticlockwise, so 2.0 N m2.0\,\mathrm{N\,m}2.0Nm clockwise. The value 38 adds all three sizes without regard to direction.
6.

Medium·Determine[2 marks]

A light plank balances on a pivot. A 120 N downward force acts 1.5 m to the left of the pivot, and a 90 N downward force acts on the right. Determine the distance of the 90 N force from the pivot.
Show answer and explanation

Answer: C · Worked explanation

Balance means the clockwise and anticlockwise moments about the pivot are equal. By the principle of moments, 120×1.5=90d120\times1.5=90d120×1.5=90d, so d=18090=2.0d=\frac{180}{90}=2.0d=90180​=2.0 m. The value 1.1 m comes from inverting the ratio, 90×1.5120\frac{90\times1.5}{120}12090×1.5​. The value 3.5 m adds 2.0 m to 1.5 m, measuring from the other force instead of from the pivot.
7.

Medium·Determine[2 marks]

A uniform beam AB of length 5.00 m and weight 100 N rests horizontally on supports at A and at C, where AC = 4.00 m. Determine the reaction at A.
Show answer and explanation

Answer: C · Worked explanation

Take moments about A, with the weight at 2.50 m: RC×4.00=100×2.50R_\mathrm{C}\times4.00=100\times2.50RC​×4.00=100×2.50, so RC=62.5R_\mathrm{C}=62.5RC​=62.5 N. Then RA=100−62.5=37.5R_\mathrm{A}=100-62.5=37.5RA​=100−62.5=37.5 N. The value 62.5 N is the reaction at C. The value 50.0 N assumes an equal split, which holds only if the centre of mass is midway between the supports.
8.

Hard·Determine[2 marks]

A uniform plank AB has length 6.00 m and weight 150 N. It rests on supports at A and at C, where AC = 4.00 m. A child of weight 300 N walks from A towards B. Determine the distance from A at which the plank is about to tilt.
Show answer and explanation

Answer: C · Worked explanation

At the point of tilting the reaction at A is zero. Take moments about C: the plank’s weight acts 1.00 m from C, so 150×1.00=300x150\times1.00=300x150×1.00=300x, giving x=0.500x=0.500x=0.500 m beyond C. The child is then 4.50 m from A. The value 0.500 m is measured from C, not from A.
9.

Hard·Determine[2 marks]

A uniform rod AB of length 2.00 m and weight 30 N is pivoted at A. It is held horizontal by a string fixed to B, making 30∘30^{\circ}30∘ with the rod. Determine the force exerted by the string.
Show answer and explanation

Answer: B · Worked explanation

The string force acts at an angle, so resolve it before taking moments. Take moments about A. Only the component Tsin⁡30∘T\sin30^{\circ}Tsin30∘ at right angles to the rod turns it: Tsin⁡30∘×2.00=30×1.00T\sin30^{\circ}\times2.00=30\times1.00Tsin30∘×2.00=30×1.00, so T=30T=30T=30 N. The value 15 N ignores the angle. The value 17 N uses cos⁡30∘\cos30^{\circ}cos30∘ in place of sin⁡30∘\sin30^{\circ}sin30∘.
10.

Hard·Determine[2 marks]

A light plank rests in equilibrium on a pivot. A downward 80 N force acts 1.5 m to the left of the pivot. A second downward 50 N force acts on the right. Determine the reaction at the pivot.
Show answer and explanation

Answer: D · Worked explanation

The plank is in equilibrium, and the reaction at the pivot is the only upward force. The resultant force is zero, so the upward reaction equals the sum of the downward forces: 80+50=13080+50=13080+50=130 N. The value 30 N subtracts the forces as if they acted in opposite directions, but both act downwards. The value 120 is the moment of the 80 N force in N m, a different quantity.

Keep going

Previous topicM8 Forces and Newton's laws

More in M · Mechanics

  1. M6Quantities and units in mechanicsNotes · 10 questions
  2. M7KinematicsNotes · 10 questions
  3. M8Forces and Newton's lawsNotes · 10 questions
  4. M9MomentsNotes · 10 questions

All Edexcel A-level Mathematics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by Pearson Edexcel or any exam board.

On this page

0/5 read

  1. 1A moment measures the turning effect of a force
  2. 2A force at an angle has a smaller turning effect
  3. 3Opposite turning directions need opposite signs
  4. 4Equilibrium needs zero resultant force and zero resultant moment
  5. 5Take moments about the point where an unknown force acts
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe