Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›Edexcel A-level Mathematics
  3. ›M Mechanics
  4. ›M7 Kinematics

Edexcel A-level Mathematics · M · Mechanics

M7 Kinematics

Sketch and interpret motion graphs, calculate speed, velocity and acceleration, use the equations of motion for constant acceleration, and explain negative signs.

  • 5 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Displacement and velocity carry direction, but speed does not
  1. 1Displacement and velocity carry direction, but speed does not
  2. 2Gradients and areas on motion graphs give velocity and acceleration
  3. 3Five equations link the variables when acceleration is constant
  4. 4Choose the equation by listing what you know and need
  5. 5Negative signs show direction, not whether something slows down
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Displacement and velocity carry direction, but speed does not

Walk 3 m east along a corridor, then 3 m back. You have travelled 6 m, yet you end where you began. Displacement records the change in position, so here it is zero.

Now think about how fast you moved. Velocity is the rate at which displacement changes. For displacement sss and time ttt, v=dsdtv=\frac{\mathrm{d}s}{\mathrm{d}t}v=dtds​, and its sign gives the direction. Speed is the size of the velocity, so it is never negative.

Average speed is total distance divided by total time, whereas average velocity is displacement divided by time, with a direction.

Worked example

Average speed and average velocity

A runner goes 80 m east in 20 s, then 20 m west in 5 s. Find the average speed and the average velocity for the whole run.
  1. 1
    Total distance =80+20=100 m=80+20=100\,\mathrm{m}=80+20=100m and total time =20+5=25 s=20+5=25\,\mathrm{s}=20+5=25s.
  2. 2
    Average speed =100 m25 s=4.0 m s−1=\frac{100\,\mathrm{m}}{25\,\mathrm{s}}=4.0\,\mathrm{m\,s^{-1}}=25s100m​=4.0ms−1.
  3. 3
    Displacement =80−20=60 m=80-20=60\,\mathrm{m}=80−20=60m east.
  4. 4
    Average velocity =60 m25 s=2.4 m s−1=\frac{60\,\mathrm{m}}{25\,\mathrm{s}}=2.4\,\mathrm{m\,s^{-1}}=25s60m​=2.4ms−1 east.

Answer: The average speed is 4.0 m s−14.0\,\mathrm{m\,s^{-1}}4.0ms−1. The average velocity is 2.4 m s−12.4\,\mathrm{m\,s^{-1}}2.4ms−1 east.

Common mistake

Average speed is not the size of the average velocity. The two differ whenever the direction changes.

Key terms · tap one for its definition

displacement

Displacement is final position minus initial position, including its sign.

velocity

For position x(t)x(t)x(t), velocity is v(t)=x′(t)v(t)=x'(t)v(t)=x′(t); its sign indicates direction.

speed

Speed is the magnitude of velocity, equal to distance travelled divided by time taken for steady motion, in m s−1\mathrm{m\,s^{-1}}ms−1.

Part 1 done

2

Part 2 of 5: Gradients and areas on motion graphs give velocity and acceleration

Now that velocity has a meaning, a graph can show it at a glance. On a displacement-time graph, the gradient is the velocity. A straight line means constant velocity, a curve means changing velocity, and a flat line means rest.

On a velocity-time graph, the gradient is the acceleration. It is measured in m s−2\mathrm{m\,s^{-2}}ms−2 and given by a=dvdta=\frac{\mathrm{d}v}{\mathrm{d}t}a=dtdv​. The area between the graph and the time axis is the change in displacement.

What the gradient and area represent

GraphGradientArea under graph
Displacement-timeVelocityNo simple meaning
Velocity-timeAccelerationChange in displacement
Graph
Displacement-time
Gradient
Velocity
Area under graph
No simple meaning
Graph
Velocity-time
Gradient
Acceleration
Area under graph
Change in displacement

Area above the time axis counts as positive and area below counts as negative. Add the signed areas to find displacement, or add the unsigned areas to find the total distance travelled.

Figure 1. Three straight sections show speeding up, steady motion and slowing down.

Worked example

Reading a velocity-time graph

The figure shows a car that accelerates from rest to 8 m s−18\,\mathrm{m\,s^{-1}}8ms−1 in 4 s, travels at that speed for 6 s, then slows to rest in 4 s. Find the acceleration in the first stage and the total distance.
  1. 1
    Acceleration is the gradient, so a=8−04a=\frac{8-0}{4}a=48−0​.
  2. 2
    Hence a=2 m s−2a=2\,\mathrm{m\,s^{-2}}a=2ms−2 for the first 4 s.
  3. 3
    The shape is a trapezium with parallel sides of 14 s and 6 s, and height 8 m s−18\,\mathrm{m\,s^{-1}}8ms−1.
  4. 4
    Area =12(14+6)×8=80=\frac{1}{2}(14+6)\times8=80=21​(14+6)×8=80.

Answer: The acceleration is 2 m s−22\,\mathrm{m\,s^{-2}}2ms−2 and the car travels 80 m.

Key term

acceleration

Acceleration is the rate of change of velocity with respect to time.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the quantity that always has a direction.
Show answer and explanation

Answer: C · Worked explanation

Velocity includes direction, shown by its sign once a positive direction is chosen. Speed is only the size of the velocity, so it is never negative. Distance travelled is the length of the path and also has no direction. Time taken is simply a duration.
3

Part 3 of 5: Five equations link the variables when acceleration is constant

A car braking evenly or a ball falling has constant acceleration. Its velocity-time graph is a straight line. Five variables describe such motion.

  • sss: displacement from the start, in m\mathrm{m}m
  • uuu: initial velocity, in m s−1\mathrm{m\,s^{-1}}ms−1
  • vvv: final velocity, in m s−1\mathrm{m\,s^{-1}}ms−1
  • aaa: acceleration, in m s−2\mathrm{m\,s^{-2}}ms−2
  • ttt: time taken, in s\mathrm{s}s

The five equations and the variable each one leaves out

EquationMissing variable
v=u+atv=u+atv=u+atsss
s=ut+12at2s=ut+\frac{1}{2}at^2s=ut+21​at2vvv
s=vt−12at2s=vt-\frac{1}{2}at^2s=vt−21​at2uuu
v2=u2+2asv^2=u^2+2asv2=u2+2asttt
s=12(u+v)ts=\frac{1}{2}(u+v)ts=21​(u+v)taaa
Equation
v=u+atv=u+atv=u+at
Missing variable
sss
Equation
s=ut+12at2s=ut+\frac{1}{2}at^2s=ut+21​at2
Missing variable
vvv
Equation
s=vt−12at2s=vt-\frac{1}{2}at^2s=vt−21​at2
Missing variable
uuu
Equation
v2=u2+2asv^2=u^2+2asv2=u2+2as
Missing variable
ttt
Equation
s=12(u+v)ts=\frac{1}{2}(u+v)ts=21​(u+v)t
Missing variable
aaa

Each equation leaves out one variable, so knowing three of the five lets you find the other two.

Common mistake

These equations hold only while the acceleration stays constant. If it changes, split the motion into stages.

Key term

constant acceleration

Constant acceleration is acceleration whose value does not change with time, so the velocity-time graph is a straight line.

Part 3 done

4

Part 4 of 5: Choose the equation by listing what you know and need

Knowing the equations is half the work. The other half is choosing the right one.

  • Draw a sketch and mark a positive direction.
  • List the known values of sss, uuu, vvv, aaa and ttt.
  • Mark the variable you need and pick the equation that has no other unknown.
  • Substitute with signs, then solve.

Falling and thrown objects near the Earth’s surface have an acceleration of 9.8 m s−29.8\,\mathrm{m\,s^{-2}}9.8ms−2 downwards, ignoring air resistance. Give aaa the sign that matches your chosen positive direction. If up is positive, then a=−9.8a=-9.8a=−9.8.

Worked example

A ball thrown upwards

A ball is thrown straight up at 14 m s−114\,\mathrm{m\,s^{-1}}14ms−1. Ignore air resistance and take g=9.8 m s−2g=9.8\,\mathrm{m\,s^{-2}}g=9.8ms−2. Find the greatest height and the time taken to reach it.
  1. 1
    Take up as positive, so u=14u=14u=14, a=−9.8a=-9.8a=−9.8 and v=0v=0v=0 at the top.
  2. 2
    Use v2=u2+2asv^2=u^2+2asv2=u2+2as: 0=142+2(−9.8)s0=14^2+2(-9.8)s0=142+2(−9.8)s.
  3. 3
    So 19.6s=19619.6s=19619.6s=196, giving s=10s=10s=10.
  4. 4
    Use v=u+atv=u+atv=u+at: 0=14−9.8t0=14-9.8t0=14−9.8t, so t=149.8≈1.4t=\frac{14}{9.8}\approx1.4t=9.814​≈1.4.

Answer: The greatest height is 10 m, reached after about 1.4 s.

Part 4 done

Quick check

One question on the part you just read

Easy

State what the gradient of a displacement-time graph gives.
Show answer and explanation

Answer: B · Worked explanation

Gradient is change in displacement divided by change in time, which is velocity. Acceleration is the gradient of a velocity-time graph instead, so it is the most tempting wrong idea. The gradient of a displacement-time graph is not a distance, and time is plotted on the horizontal axis.
5

Part 5 of 5: Negative signs show direction, not whether something slows down

In the ball example, the acceleration was negative while the ball rose. The sign only gives direction relative to your chosen positive direction. A negative velocity means motion in the negative direction. A negative acceleration means the velocity is changing towards the negative direction.

Signs of velocity and acceleration

VelocityAccelerationMotion
PositivePositiveSpeeding up
PositiveNegativeSlowing down
NegativeNegativeSpeeding up
NegativePositiveSlowing down
Velocity
Positive
Acceleration
Positive
Motion
Speeding up
Velocity
Positive
Acceleration
Negative
Motion
Slowing down
Velocity
Negative
Acceleration
Negative
Motion
Speeding up
Velocity
Negative
Acceleration
Positive
Motion
Slowing down

An object slows down when velocity and acceleration have opposite signs. This slowing is called deceleration. On a velocity-time graph, a line below the time axis shows motion in the negative direction.

Common mistake

Negative acceleration does not always mean slowing down. A body moving in the negative direction with negative acceleration speeds up.

Go deeperWhen acceleration changes with time

The five equations fail if the acceleration varies. Calculus then links the quantities through v=dsdtv=\frac{\mathrm{d}s}{\mathrm{d}t}v=dtds​ and a=dvdta=\frac{\mathrm{d}v}{\mathrm{d}t}a=dtdv​.

For example, if s=t3−6t2s=t^3-6t^2s=t3−6t2 in metres, then v=3t2−12tv=3t^2-12tv=3t2−12t and a=6t−12a=6t-12a=6t−12. At t=4 st=4\,\mathrm{s}t=4s the velocity is zero, so the object is momentarily at rest.

Integration runs the process backwards. The constant of integration comes from a known value, such as the initial velocity.

Key term

deceleration

A deceleration is a decrease in speed, which happens when velocity and acceleration have opposite signs.

Note read

Check your recall[13 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State two differences between speed and velocity.

    Show mark schemeHide mark scheme

    Model answer

    Velocity has a direction and can be negative. Speed has no direction and is never negative.

    • 1 mark for stating that velocity has a direction (or sign)
    • 1 mark for stating that speed has no direction and is never negative (it is the size of the velocity)
  2. 2.Describe[2 marks]

    Describe what the gradient and the area under a velocity-time graph represent.

    Show mark schemeHide mark scheme

    Model answer

    The gradient gives the acceleration. The area between the graph and the time axis gives the change in displacement.

    • 1 mark for stating that the gradient is the acceleration
    • 1 mark for stating that the area is the change in displacement
  3. 3.Calculate[3 marks]

    Calculate the displacement of a car that moves with constant acceleration 1.5 m s−21.5\,\mathrm{m\,s^{-2}}1.5ms−2 for 8 s, starting at 20 m s−120\,\mathrm{m\,s^{-1}}20ms−1.

    Show mark schemeHide mark scheme

    Model answer

    Use s=ut+12at2=20×8+12×1.5×82=160+48=208 ms=ut+\frac{1}{2}at^2=20\times8+\frac{1}{2}\times1.5\times8^2=160+48=208\,\mathrm{m}s=ut+21​at2=20×8+21​×1.5×82=160+48=208m.

    • 1 mark for choosing s=ut+12at2s=ut+\frac{1}{2}at^2s=ut+21​at2
    • 1 mark for substituting u=20u=20u=20, a=1.5a=1.5a=1.5 and t=8t=8t=8 correctly
    • 1 mark for obtaining 208 m208\,\mathrm{m}208m
  4. 4.Explain[2 marks]

    Explain why a negative acceleration does not always mean that an object is slowing down.

    Show mark schemeHide mark scheme

    Model answer

    The sign of acceleration gives only its direction. An object slows down only when velocity and acceleration have opposite signs, so a body moving in the negative direction with negative acceleration speeds up.

    • 1 mark for stating that the sign gives direction only
    • 1 mark for stating that slowing needs velocity and acceleration of opposite signs (so negative velocity with negative acceleration speeds up)
  5. 5.Calculate[3 marks]

    Calculate the time taken for a stone dropped from rest to fall 19.6 m. Take g=9.8 m s−2g=9.8\,\mathrm{m\,s^{-2}}g=9.8ms−2 and ignore air resistance.

    Show mark schemeHide mark scheme

    Model answer

    With u=0u=0u=0, s=ut+12at2s=ut+\frac{1}{2}at^2s=ut+21​at2 gives 19.6=4.9t219.6=4.9t^219.6=4.9t2, so t2=4t^2=4t2=4 and t=2.0 st=2.0\,\mathrm{s}t=2.0s.

    • 1 mark for using s=ut+12at2s=ut+\frac{1}{2}at^2s=ut+21​at2 with u=0u=0u=0 and a=9.8a=9.8a=9.8
    • 1 mark for obtaining 19.6=4.9t219.6=4.9t^219.6=4.9t2 (or t2=4t^2=4t2=4)
    • 1 mark for giving t=2.0 st=2.0\,\mathrm{s}t=2.0s
  6. 6.State[1 mark]

    State the equation of motion for constant acceleration that does not contain time.

    Show mark schemeHide mark scheme

    Model answer

    v2=u2+2asv^2=u^2+2asv2=u2+2as.

    • 1 mark for stating v2=u2+2asv^2=u^2+2asv2=u2+2as

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the unit of acceleration.
Show answer and explanation

Answer: C · Worked explanation

Acceleration is change in velocity (m s−1\mathrm{m\,s^{-1}}ms−1) divided by time (s\mathrm{s}s), which gives m s−2\mathrm{m\,s^{-2}}ms−2. The unit m s−1\mathrm{m\,s^{-1}}ms−1 is the unit of velocity, not of its rate of change. The units m s2\mathrm{m\,s^{2}}ms2 and m2 s−1\mathrm{m^2\,s^{-1}}m2s−1 do not come from dividing a velocity by a time, so neither can be the unit of acceleration.
4.

Medium·Calculate[1 mark]

Calculate the acceleration of a car that speeds up uniformly from 6 m s−16\,\mathrm{m\,s^{-1}}6ms−1 to 18 m s−118\,\mathrm{m\,s^{-1}}18ms−1 in 4 s.
Show answer and explanation

Answer: D · Worked explanation

Acceleration is the change in velocity divided by the time taken, so both velocities must be used. Use a=v−ut=18−64=3 m s−2a=\frac{v-u}{t}=\frac{18-6}{4}=3\,\mathrm{m\,s^{-2}}a=tv−u​=418−6​=3ms−2. The value 4.5 comes from dividing only the final velocity by the time, which ignores the starting velocity. The value 12 is the change in velocity before dividing by the time.
5.

Medium·Determine[2 marks]

A velocity-time graph rises in a straight line from 0 to 12 m s−112\,\mathrm{m\,s^{-1}}12ms−1 over 5 s, then stays at 12 m s−112\,\mathrm{m\,s^{-1}}12ms−1 for 3 s. Determine the displacement over the 8 s.
Show answer and explanation

Answer: C · Worked explanation

The area is a triangle plus a rectangle: 12×5×12=30\frac{1}{2}\times5\times12=3021​×5×12=30 m and 3×12=363\times12=363×12=36 m, giving 66 m. The value 96 m comes from treating the whole 8 s as steady motion at 12 m s−112\,\mathrm{m\,s^{-1}}12ms−1. The value 36 m counts only the steady section.
6.

Medium·Determine[2 marks]

Determine the speed of a stone after 3.0 s of free fall from rest. Take g=9.8 m s−2g=9.8\,\mathrm{m\,s^{-2}}g=9.8ms−2 and ignore air resistance.
Show answer and explanation

Answer: D · Worked explanation

Free fall from rest has u=0u=0u=0 and constant acceleration ggg, so the speed grows steadily with time. Use v=u+at=0+9.8×3.0=29.4≈29 m s−1v=u+at=0+9.8\times3.0=29.4\approx29\,\mathrm{m\,s^{-1}}v=u+at=0+9.8×3.0=29.4≈29ms−1. The value 44 is the distance fallen, 12×9.8×3.02=44.1\frac{1}{2}\times9.8\times3.0^2=44.121​×9.8×3.02=44.1 m, which is not a speed. The value 15 is the average speed over the 3.0 s, not the final speed.
7.

Medium·Describe[1 mark]

Describe the motion of a particle that has velocity −4 m s−1-4\,\mathrm{m\,s^{-1}}−4ms−1 and acceleration +2 m s−2+2\,\mathrm{m\,s^{-2}}+2ms−2.
Show answer and explanation

Answer: A · Worked explanation

The negative velocity means motion in the negative direction. The acceleration has the opposite sign, so it reduces the speed and the particle slows down. Speeding up in the negative direction would need a negative acceleration, so that option is wrong. The positive sign does not mean the particle speeds up.
8.

Hard·Determine[2 marks]

A train travelling at 30 m s−130\,\mathrm{m\,s^{-1}}30ms−1 brakes uniformly and stops in 150 m. Determine the time taken to stop.
Show answer and explanation

Answer: D · Worked explanation

Time is the unknown and the acceleration is not given, so choose the equation that leaves out aaa. Use s=12(u+v)ts=\frac{1}{2}(u+v)ts=21​(u+v)t: 150=12(30+0)t=15t150=\frac{1}{2}(30+0)t=15t150=21​(30+0)t=15t, so t=10t=10t=10 s. The value 5 s comes from 150÷30150\div30150÷30, which wrongly assumes the train keeps its initial speed all the way. The value 3 is the size of the acceleration in m s−2\mathrm{m\,s^{-2}}ms−2, not a time.
9.

Hard·Calculate[2 marks]

Calculate the time a ball thrown upwards at 20 m s−120\,\mathrm{m\,s^{-1}}20ms−1 takes to return to its launch height. Take g=9.8 m s−2g=9.8\,\mathrm{m\,s^{-2}}g=9.8ms−2 and ignore air resistance.
Show answer and explanation

Answer: B · Worked explanation

Up is positive, so a=−9.8a=-9.8a=−9.8, and the displacement is zero when the ball is back at its launch height. With s=0s=0s=0, s=ut+12at2s=ut+\frac{1}{2}at^2s=ut+21​at2 gives 0=20t−4.9t20=20t-4.9t^20=20t−4.9t2, so t=204.9≈4.1t=\frac{20}{4.9}\approx4.1t=4.920​≈4.1 s. The value 2.0 s is the time to reach the highest point only. The return journey takes as long again.
10.

Hard·Determine[2 marks]

A particle moves in a straight line with initial velocity 6 m s−16\,\mathrm{m\,s^{-1}}6ms−1 and constant acceleration −2 m s−2-2\,\mathrm{m\,s^{-2}}−2ms−2. Determine the total distance it travels in the first 5 s.
Show answer and explanation

Answer: B · Worked explanation

The velocity is zero when t=3t=3t=3 s, and by then s=6(3)−32=9s=6(3)-3^2=9s=6(3)−32=9 m. At t=5t=5t=5 s, s=6(5)−52=5s=6(5)-5^2=5s=6(5)−52=5 m, so the particle came back 4 m. The distance is 9+4=139+4=139+4=13 m. The value 5 m is the displacement, which is not the distance travelled.

Keep going

Next topicM8 Forces and Newton's lawsPrevious topicM6 Quantities and units in mechanics

More in M · Mechanics

  1. M6Quantities and units in mechanicsNotes · 10 questions
  2. M7KinematicsNotes · 10 questions
  3. M8Forces and Newton's lawsNotes · 10 questions
  4. M9MomentsNotes · 10 questions

All Edexcel A-level Mathematics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by Pearson Edexcel or any exam board.

On this page

0/5 read

  1. 1Displacement and velocity carry direction, but speed does not
  2. 2Gradients and areas on motion graphs give velocity and acceleration
  3. 3Five equations link the variables when acceleration is constant
  4. 4Choose the equation by listing what you know and need
  5. 5Negative signs show direction, not whether something slows down
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Velocity against time for a car journey

Velocity (m s⁻¹)024681012140246810Time (s)
  • Speeding up
  • Steady
  • Slowing down