Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›5 Kinetics
  4. ›5.10 Multistep reaction energy profile

AP Chemistry · Unit 5 · Kinetics

5.10 Multistep reaction energy profile

Draw and interpret multistep energy profiles, identify their key features, and compare step activation energies.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Each reaction step adds a peak to the profile
  1. 1Each reaction step adds a peak to the profile
  2. 2Peaks and valleys identify distinct points in the mechanism
  3. 3Measure each activation energy from its preceding valley
  4. 4The largest step barrier points to the slow step
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Each reaction step adds a peak to the profile

A multistep energy profile shows potential energy as a reaction proceeds through several steps. Draw potential energy on the vertical axis and reaction progress on the horizontal axis. Start at the reactants and end at the products. Draw one peak for each step, with a valley between neighboring peaks. The peaks show transition states, where the system has especially high energy. The valleys between peaks show substances formed in one step and consumed in another.

Exam tip

Label both axes and every peak and valley. Use relative heights to show the intended energy changes.

Key terms · tap one for its definition

multistep energy profile

A graph of potential energy against reaction progress for a reaction that proceeds through more than one step.

transition states

High-energy arrangements at the peaks of an energy profile, each associated with one reaction step.

Part 1 done

2

Part 2 of 4: Peaks and valleys identify distinct points in the mechanism

An intermediate occupies a valley between two peaks. It is produced during the reaction, then used in a later step. A transition state sits at a peak, not a valley. It is a brief, high-energy arrangement along a step's pathway. Neither intermediate valleys nor transition-state peaks represent the initial reactants or final products. A profile with two peaks has two steps and one intermediate. A profile with three peaks has three steps and two intermediate valleys.

Figure 1. Each peak marks a transition state. The valley between them marks an intermediate.

Common mistake

A peak is not an intermediate. Intermediates lie in valleys between peaks.

Key term

intermediate

A substance formed in one reaction step and consumed in a later step.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the correct axis labels for a multistep energy profile.
Show answer and explanation

Answer: D · Worked explanation

A multistep energy profile tracks how potential energy changes as a reaction proceeds, so potential energy belongs on the vertical axis and reaction progress on the horizontal axis. Putting reaction progress on the vertical axis reverses the conventions used for this profile.
3

Part 3 of 4: Measure each activation energy from its preceding valley

The activation energy for a forward step is the difference between its peak and the energy where that step begins. For the first step, begin at the reactants. For the second, begin at the intermediate. Do not measure every barrier from the reactants. The overall energy change compares only products with reactants. A lower product energy means the overall reaction releases energy, even if every step requires an activation barrier.

Worked example

Compare two step barriers

Reactants are at 40 kJ mol⁻¹, the first peak at 100 kJ mol⁻¹, the intermediate at 60 kJ mol⁻¹, the second peak at 140 kJ mol⁻¹, and products at 20 kJ mol⁻¹. Find both forward activation energies and the overall energy change.
  1. 1
    First step: Ea,1=100−40=60 kJ mol−1E_{\mathrm{a},1}=100-40=60\ \mathrm{kJ\,mol^{-1}}Ea,1​=100−40=60 kJmol−1.
  2. 2
    Second step: Ea,2=140−60=80 kJ mol−1E_{\mathrm{a},2}=140-60=80\ \mathrm{kJ\,mol^{-1}}Ea,2​=140−60=80 kJmol−1.
  3. 3
    Overall: ΔE=20−40=−20 kJ mol−1\Delta E=20-40=-20\ \mathrm{kJ\,mol^{-1}}ΔE=20−40=−20 kJmol−1.

Answer: The barriers are 60 kJ mol⁻¹ and 80 kJ mol⁻¹. The overall energy change is −20 kJ mol⁻¹.

Key terms · tap one for its definition

activation energy

The energy difference between a step's starting level and its transition-state peak.

overall energy change

The energy of the products minus the energy of the reactants.

Part 3 done

4

Part 4 of 4: The largest step barrier points to the slow step

In a simplified multistep profile, the step with the largest forward activation energy is usually the rate-determining step. Its barrier is hardest to overcome, so that step tends to proceed most slowly. Compare the vertical rise from each step's starting level to its peak. Do not choose a step merely because its peak is highest on the page. In the worked example, the second barrier is 80 kJ mol⁻¹, compared with 60 kJ mol⁻¹ for the first. The second step is therefore predicted to be rate-determining.

Common mistake

The highest peak does not always mark the largest barrier. Compare each peak with the valley immediately before it.

Key term

rate-determining step

The slow step that most strongly limits the rate of a multistep reaction.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify what a valley between two peaks represents on a multistep energy profile.

    Show mark schemeHide mark scheme

    Model answer

    It represents an intermediate.

    • 1 mark for identifying an intermediate
  2. 2.Describe[3 marks]

    Describe how to draw an energy profile for a reaction with three steps.

    Show mark schemeHide mark scheme

    Model answer

    Put potential energy on the vertical axis and reaction progress on the horizontal axis. Draw three peaks, with two intermediate valleys between them. Start at the reactants and end at the products.

    • 1 mark for placing potential energy on the vertical axis and reaction progress on the horizontal axis
    • 1 mark for drawing three peaks separated by two intermediate valleys
    • 1 mark for showing reactants at the start and products at the end
  3. 3.Calculate[3 marks]

    Calculate both forward activation energies when reactants are at 30 kJ mol⁻¹, the first peak is at 90 kJ mol⁻¹, the intermediate is at 50 kJ mol⁻¹, and the second peak is at 120 kJ mol⁻¹.

    Show mark schemeHide mark scheme

    Model answer

    The first activation energy is 90−30=60 kJ mol−190-30=60\ \mathrm{kJ\,mol^{-1}}90−30=60 kJmol−1. The second is 120−50=70 kJ mol−1120-50=70\ \mathrm{kJ\,mol^{-1}}120−50=70 kJmol−1.

    • 1 mark for subtracting the reactant energy from the first peak energy
    • 1 mark for giving the first activation energy as 60 kJ mol⁻¹
    • 1 mark for giving the second activation energy as 70 kJ mol⁻¹ by subtracting the intermediate energy from the second peak energy
  4. 4.Explain[3 marks]

    Explain how a multistep energy profile can suggest the rate-determining step.

    Show mark schemeHide mark scheme

    Model answer

    Compare each peak with the starting level of its step. The largest forward activation energy usually identifies the slowest step in a simplified profile. That step is predicted to be rate-determining.

    • 1 mark for comparing each peak with the starting energy for that step
    • 1 mark for identifying the step with the largest forward activation energy as usually the slowest
    • 1 mark for linking the slowest step to the rate-determining step
  5. 5.Calculate[2 marks]

    Calculate the overall energy change when reactants are at 75 kJ mol⁻¹ and products are at 45 kJ mol⁻¹. State whether the overall reaction releases energy.

    Show mark schemeHide mark scheme

    Model answer

    ΔE=45−75=−30 kJ mol−1\Delta E=45-75=-30\ \mathrm{kJ\,mol^{-1}}ΔE=45−75=−30 kJmol−1. The overall reaction releases energy.

    • 1 mark for calculating an overall energy change of −30 kJ mol⁻¹
    • 1 mark for stating that the overall reaction releases energy

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify the feature represented by a peak on a multistep energy profile.
Show answer and explanation

Answer: C · Worked explanation

Each peak represents a transition state, a brief, high-energy arrangement associated with one reaction step. An intermediate is instead represented by a valley between peaks, while reactants and products occupy the beginning and end of the profile.
3.

Easy·Determine[1 mark]

A profile has four peaks, with a valley between each neighboring pair. Determine how many reaction steps and intermediate valleys it represents.
Show answer and explanation

Answer: B · Worked explanation

Each peak corresponds to one reaction step, so four peaks indicate four steps. The valleys between neighboring peaks are intermediate states; four peaks have three spaces between them, giving three intermediate valleys. The starting reactants and final products are not counted as intermediate valleys.
4.

Easy·Deduce[1 mark]

A multistep profile ends at a lower potential energy than it begins. Deduce the overall energy change for the reaction.
Show answer and explanation

Answer: A · Worked explanation

The overall energy change is the product energy minus the reactant energy. If the products are at a lower energy, this difference is negative, indicating that energy is released overall. The activation energy of an individual step is a separate difference between that step's peak and its starting level.
5.

Medium·Calculate[1 mark]

In a reaction profile, the reactants are at 52 kJ/mol52\ \text{kJ/mol}52 kJ/mol and the products are at 67 kJ/mol67\ \text{kJ/mol}67 kJ/mol. Calculate the overall energy change.
Show answer and explanation

Answer: A · Worked explanation

The overall energy change is product energy minus reactant energy: 67−52=+15 kJ/mol67-52=+15\ \text{kJ/mol}67−52=+15 kJ/mol. The positive result means the products are higher in energy than the reactants. Subtracting in the opposite order gives the tempting negative value but does not follow the defined order.
6.

Medium·Calculate[2 marks]

A two-step profile has reactants at 25 kJ/mol25\ \text{kJ/mol}25 kJ/mol, a first peak at 83 kJ/mol83\ \text{kJ/mol}83 kJ/mol, an intermediate at 48 kJ/mol48\ \text{kJ/mol}48 kJ/mol, and a second peak at 101 kJ/mol101\ \text{kJ/mol}101 kJ/mol. Calculate the forward activation energy for the second step.
Show answer and explanation

Answer: D · Worked explanation

The second step begins at the intermediate, so its forward activation energy is the second peak minus the intermediate energy: 101−48=53 kJ/mol101-48=53\ \text{kJ/mol}101−48=53 kJ/mol. The tempting value of 76 kJ/mol76\ \text{kJ/mol}76 kJ/mol comes from subtracting the reactant energy instead, which incorrectly measures the second barrier from the start of the entire reaction.
7.

Medium·Identify[1 mark]

A profile starts at 30 kJ/mol30\ \text{kJ/mol}30 kJ/mol, rises to a peak at 90 kJ/mol90\ \text{kJ/mol}90 kJ/mol, falls to a valley at 55 kJ/mol55\ \text{kJ/mol}55 kJ/mol, and rises to a second peak at 110 kJ/mol110\ \text{kJ/mol}110 kJ/mol. Identify the energy level that represents the intermediate.
Show answer and explanation

Answer: D · Worked explanation

The intermediate is the substance formed in the first step and consumed in the second, so it occupies the valley between the two peaks. In this profile that valley is at 55 kJ/mol55\ \text{kJ/mol}55 kJ/mol. The peak energies correspond to transition states, and the initial energy is the reactant level.
8.

Medium·Determine[2 marks]

A reaction has two forward steps. Step 1 begins at 20 kJ/mol20\ \text{kJ/mol}20 kJ/mol and reaches a peak at 72 kJ/mol72\ \text{kJ/mol}72 kJ/mol. Step 2 begins at 46 kJ/mol46\ \text{kJ/mol}46 kJ/mol and reaches a peak at 88 kJ/mol88\ \text{kJ/mol}88 kJ/mol. Determine which step is predicted to be rate-determining.
Show answer and explanation

Answer: B · Worked explanation

Step 1 has a forward barrier of 72−20=52 kJ/mol72-20=52\ \text{kJ/mol}72−20=52 kJ/mol, while step 2 has a barrier of 88−46=42 kJ/mol88-46=42\ \text{kJ/mol}88−46=42 kJ/mol. The larger barrier makes step 1 the predicted rate-determining step in this simplified profile. Choosing step 2 just because its peak is higher ignores that its starting energy is also higher.
9.

Medium·Compare[2 marks]

In a three-step profile, the forward activation energies are 35 kJ/mol35\ \text{kJ/mol}35 kJ/mol, 61 kJ/mol61\ \text{kJ/mol}61 kJ/mol, and 44 kJ/mol44\ \text{kJ/mol}44 kJ/mol. Compare the barriers to determine the predicted rate-determining step.
Show answer and explanation

Answer: B · Worked explanation

The second step has the largest forward activation energy, 61 kJ/mol61\ \text{kJ/mol}61 kJ/mol, compared with 35 kJ/mol35\ \text{kJ/mol}35 kJ/mol and 44 kJ/mol44\ \text{kJ/mol}44 kJ/mol for the other steps. It is therefore predicted to be the slowest and rate-determining step. Being first in the mechanism does not by itself make a step rate-determining.
10.

Hard·Deduce[2 marks]

A three-step profile has reactants at 40 kJ/mol40\ \text{kJ/mol}40 kJ/mol, peaks at 95, 120, and 105 kJ/mol105\ \text{kJ/mol}105 kJ/mol, intermediate valleys at 70 and 80 kJ/mol80\ \text{kJ/mol}80 kJ/mol, and products at 25 kJ/mol25\ \text{kJ/mol}25 kJ/mol. Deduce the overall energy change and whether the reaction releases energy overall.
Show answer and explanation

Answer: D · Worked explanation

The overall change depends only on the endpoints: 25−40=−15 kJ/mol25-40=-15\ \text{kJ/mol}25−40=−15 kJ/mol, so the reaction releases energy overall. The intermediate and peak energies do not enter this calculation. The value −80 kJ/mol-80\ \text{kJ/mol}−80 kJ/mol incorrectly compares the products with the third peak rather than with the reactants.

Keep going

Next topic5.11 CatalysisPrevious topic5.9 Steady-state approximation

More in Unit 5 · Kinetics

  1. 5.3Concentration changes over timeNotes · 10 questions
  2. 5.4Elementary reactionsNotes · 10 questions
  3. 5.5Collision modelNotes · 10 questions
  4. 5.6Reaction energy profileNotes · 10 questions
  5. 5.7Introduction to reaction mechanismsNotes · 10 questions
  6. 5.8Reaction mechanism and rate lawNotes · 10 questions
  7. 5.9Steady-state approximationNotes · 10 questions
  8. 5.10Multistep reaction energy profileNotes · 10 questions
  9. 5.11CatalysisNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Each reaction step adds a peak to the profile
  2. 2Peaks and valleys identify distinct points in the mechanism
  3. 3Measure each activation energy from its preceding valley
  4. 4The largest step barrier points to the slow step
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe