Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›5 Kinetics
  4. ›5.11 Catalysis

AP Chemistry · Unit 5 · Kinetics

5.11 Catalysis

Explain how catalysts speed reactions, distinguish catalyst types, and identify catalysts in mechanisms.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Catalysts speed reactions without being consumed overall
  1. 1Catalysts speed reactions without being consumed overall
  2. 2An alternative pathway has a lower activation energy
  3. 3Catalyst phases distinguish two common types of catalysis
  4. 4A catalyst is consumed and regenerated within a mechanism
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Catalysts speed reactions without being consumed overall

A catalyst increases reaction rate by providing a different reaction pathway. It participates in the reaction but is regenerated before the reaction ends. Therefore, it does not appear in the overall chemical equation. A catalyst can speed both the forward and reverse reactions. It does not change the energies of reactants or products. It also does not change the equilibrium position. It only helps the system reach equilibrium faster.

Common mistake

A catalyst is not permanently used up. It can appear in an early step and be regenerated in a later step.

Key term

catalyst

A catalyst increases reaction rate through an alternative pathway and is regenerated overall.

Part 1 done

2

Part 2 of 4: An alternative pathway has a lower activation energy

Activation energy is the energy barrier that reacting particles must overcome. A catalyzed pathway has a lower barrier than the uncatalyzed pathway. At the same temperature, more reacting particles can overcome that lower barrier. The reaction therefore proceeds faster. The alternative pathway may contain several steps and more than one energy peak. Its highest relevant barrier is lower than the barrier for the uncatalyzed reaction. The overall energy change stays the same because the starting and ending substances stay the same.

Figure 1. Both pathways begin and end at the same energies. The catalyzed pathway has lower energy peaks.

Key term

activation energy

Activation energy is the energy barrier that must be overcome for a reaction step to occur.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the statement that best describes what happens to a catalyst during a reaction.
Show answer and explanation

Answer: C · Worked explanation

A catalyst participates in a reaction pathway and is regenerated, so it is not consumed overall. The option saying it becomes a product confuses a catalyst with a substance that is used up; a catalyst can appear in individual steps but does not increase the amount of product permitted by the reaction.
3

Part 3 of 4: Catalyst phases distinguish two common types of catalysis

In homogeneous catalysis, the catalyst and reactants are in the same phase. For example, dissolved iodide ions can catalyze the decomposition of dissolved hydrogen peroxide. In heterogeneous catalysis, the catalyst and reactants are in different phases. A solid catalyst can provide a surface for gaseous reactants. Reactants attach to the surface, react, then leave it. Surface interactions can weaken bonds or hold reactants near each other. The solid remains available for further reactions. Neither type changes the reaction's overall products.

Exam tip

Classify catalysis by comparing phases. Do not classify it only by whether the catalyst is a solid.

Key terms · tap one for its definition

homogeneous catalysis

Homogeneous catalysis occurs when the catalyst and reactants are in the same phase.

heterogeneous catalysis

Heterogeneous catalysis occurs when the catalyst and reactants are in different phases.

Part 3 done

4

Part 4 of 4: A catalyst is consumed and regenerated within a mechanism

Identify a catalyst by tracking substances through the mechanism. A catalyst is consumed in one step and regenerated in a later step. An intermediate follows the opposite pattern: it forms in one step and is consumed later. Both cancel when the steps are added, so cancellation alone cannot distinguish them.

Consider these steps for hydrogen peroxide decomposition. First, H2O2+I−→H2O+IO−\mathrm{H_2O_2+I^-\rightarrow H_2O+IO^-}H2​O2​+I−→H2​O+IO−. Next, H2O2+IO−→H2O+O2+I−\mathrm{H_2O_2+IO^-\rightarrow H_2O+O_2+I^-}H2​O2​+IO−→H2​O+O2​+I−. Iodide is consumed first and regenerated second, so it is the catalyst. Hypoiodite forms first and is consumed second, so it is an intermediate. Adding the steps gives 2H2O2→2H2O+O2\mathrm{2H_2O_2\rightarrow 2H_2O+O_2}2H2​O2​→2H2​O+O2​.

Key term

intermediate

An intermediate forms during a mechanism and is consumed in a later step.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain how a catalyst speeds a reaction without changing its equilibrium position.

    Show mark schemeHide mark scheme

    Model answer

    A catalyst provides an alternative pathway with lower activation energy. It speeds both forward and reverse reactions, so it does not change the equilibrium position.

    • 1 mark for stating that a catalyst provides an alternative pathway
    • 1 mark for stating that the pathway has lower activation energy
    • 1 mark for explaining that both forward and reverse reactions speed up, leaving equilibrium position unchanged
  2. 2.Describe[3 marks]

    Describe how the catalyzed and uncatalyzed energy pathways differ.

    Show mark schemeHide mark scheme

    Model answer

    The pathways start at the same reactant energy and end at the same product energy. The catalyzed pathway has a lower energy barrier and may include several steps.

    • 1 mark for stating that both pathways start at the same reactant energy
    • 1 mark for stating that both pathways end at the same product energy
    • 1 mark for stating that the catalyzed pathway has a lower energy barrier
  3. 3.Compare[3 marks]

    Compare homogeneous and heterogeneous catalysis using phases and one example of each.

    Show mark schemeHide mark scheme

    Model answer

    In homogeneous catalysis, catalyst and reactants share a phase, as with dissolved iodide and hydrogen peroxide. In heterogeneous catalysis, they occupy different phases, as with a solid catalyst and gaseous reactants.

    • 1 mark for stating that homogeneous catalysts and reactants share a phase
    • 1 mark for stating that heterogeneous catalysts and reactants occupy different phases
    • 1 mark for giving appropriate examples of both types
  4. 4.Identify[3 marks]

    Identify the catalyst and intermediate in the two hydrogen peroxide steps, and explain how you know.

    Show mark schemeHide mark scheme

    Model answer

    Iodide is the catalyst because it is consumed first and regenerated later. Hypoiodite is the intermediate because it forms first and is consumed later.

    • 1 mark for identifying iodide as the catalyst
    • 1 mark for explaining that iodide is consumed and then regenerated
    • 1 mark for identifying hypoiodite as the intermediate because it forms and is then consumed
  5. 5.Explain[2 marks]

    Explain why a catalyst can appear in mechanism steps but not in the overall equation.

    Show mark schemeHide mark scheme

    Model answer

    The catalyst participates in an early step and is regenerated in a later step. It cancels when the steps are added.

    • 1 mark for stating that the catalyst is consumed and later regenerated
    • 1 mark for stating that it cancels when the mechanism steps are added

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

On an energy profile, which quantity is reduced by introducing a catalyst while the identities of the reactants and products remain unchanged?
Show answer and explanation

Answer: B · Worked explanation

A catalyst provides an alternative pathway with a lower activation-energy barrier. Because the reactants and products are unchanged, their energies and the overall energy difference between them do not change. Lowering product energy would alter the reaction's overall energy change rather than simply provide a catalyzed route.
3.

Easy·Identify[1 mark]

Identify the type of catalysis when a dissolved catalyst and dissolved reactants are all present in one liquid solution.
Show answer and explanation

Answer: D · Worked explanation

In homogeneous catalysis, the catalyst and reactants occupy the same phase; here they are all dissolved in one liquid solution. Heterogeneous catalysis requires the catalyst and reactants to be in different phases, so the fact that a catalyst may be a particular chemical substance does not determine the classification.
4.

Easy·Identify[1 mark]

Consider a mechanism in which X is used up in the first step and reappears in a later step. Identify the role of X.
Show answer and explanation

Answer: B · Worked explanation

A catalyst is consumed in an early mechanism step and regenerated in a later step, so it is not consumed overall. An intermediate has the opposite pattern: it is formed in one step and used up later. The fact that X appears in a step does not by itself make it an overall reactant or product.
5.

Medium·Deduce[2 marks]

A reversible reaction is allowed to reach equilibrium in two identical vessels at the same temperature. One vessel contains a catalyst. Deduce the expected comparison between the vessels.
Show answer and explanation

Answer: A · Worked explanation

A catalyst speeds both the forward and reverse reactions, allowing equilibrium to be reached sooner without changing the equilibrium position. The option predicting more products is tempting because product formation is faster initially, but the reverse reaction is accelerated as well, so the final equilibrium composition remains the same.
6.

Medium·Calculate[2 marks]

For an uncatalyzed pathway, the reactants have an energy of 25 kJ/mol25\,\text{kJ/mol}25kJ/mol and the transition state has an energy of 100 kJ/mol100\,\text{kJ/mol}100kJ/mol. For a catalyzed pathway, the reactants remain at 25 kJ/mol25\,\text{kJ/mol}25kJ/mol and the highest transition state is at 70 kJ/mol70\,\text{kJ/mol}70kJ/mol. Calculate the activation energy of the catalyzed pathway.
Show answer and explanation

Answer: A · Worked explanation

Activation energy is the energy difference between the reactants and the relevant transition state. For the catalyzed pathway, Ea=70−25=45 kJ/molE_a = 70 - 25 = 45\,\text{kJ/mol}Ea​=70−25=45kJ/mol. The tempting value 70 kJ/mol70\,\text{kJ/mol}70kJ/mol is the transition-state energy measured from an arbitrary zero, not the barrier measured from the reactants.
7.

Medium·Classify[2 marks]

A solid catalyst is added to a mixture of liquid reactants, and the reaction occurs at the solid surface. Classify the catalysis by phase.
Show answer and explanation

Answer: A · Worked explanation

The catalyst is a solid while the reactants are liquids, so they occupy different phases and the catalysis is heterogeneous. Sharing a vessel does not make substances homogeneous, and phase classification does not depend on whether the catalyst is consumed; a catalyst is regenerated overall.
8.

Medium·Identify[2 marks]

A proposed mechanism has two steps: A+Q→B+R\mathrm{A + Q \rightarrow B + R}A+Q→B+R and B+R→C+Q\mathrm{B + R \rightarrow C + Q}B+R→C+Q. Which species is the catalyst?
Show answer and explanation

Answer: A · Worked explanation

Q is consumed in the first step and regenerated in the second, so it acts as the catalyst. R and B are formed in the first step and consumed in the second, which is the pattern for intermediates. C appears as a product and is not regenerated within these steps.
9.

Hard·Deduce[2 marks]

An uncatalyzed reaction has a single activation-energy barrier of 80 kJ/mol80\,\text{kJ/mol}80kJ/mol. A catalyzed mechanism has two steps with activation-energy barriers of 35 kJ/mol35\,\text{kJ/mol}35kJ/mol and 60 kJ/mol60\,\text{kJ/mol}60kJ/mol, each measured from the preceding species. The reactants and products are unchanged. Deduce the best comparison.
Show answer and explanation

Answer: C · Worked explanation

The catalyzed pathway's highest stated barrier is 60 kJ/mol60\,\text{kJ/mol}60kJ/mol, below the uncatalyzed barrier of 80 kJ/mol80\,\text{kJ/mol}80kJ/mol. The overall energy change stays the same because the starting and ending substances are unchanged. Adding the step barriers to claim a 95 kJ/mol95\,\text{kJ/mol}95kJ/mol activation energy is not justified: the steps have separate barriers measured from different species.
10.

Hard·Explain[2 marks]

A gaseous reactant reacts faster after contact with a solid catalyst. The gas molecules attach to the solid surface, react there, and then leave as products. Explain why this is classified as heterogeneous catalysis and how the surface can help the reaction proceed faster.
Show answer and explanation

Answer: B · Worked explanation

The catalyst is solid and the reactant is gaseous, so they are in different phases and the catalysis is heterogeneous. Interactions at the surface can weaken reactant bonds or hold molecules close together, helping an alternative pathway occur. The solid is not permanently consumed, and a catalyst does not shift the equilibrium position.

Keep going

Next topic6.1 Endothermic and exothermic processesPrevious topic5.10 Multistep reaction energy profile

More in Unit 5 · Kinetics

  1. 5.3Concentration changes over timeNotes · 10 questions
  2. 5.4Elementary reactionsNotes · 10 questions
  3. 5.5Collision modelNotes · 10 questions
  4. 5.6Reaction energy profileNotes · 10 questions
  5. 5.7Introduction to reaction mechanismsNotes · 10 questions
  6. 5.8Reaction mechanism and rate lawNotes · 10 questions
  7. 5.9Steady-state approximationNotes · 10 questions
  8. 5.10Multistep reaction energy profileNotes · 10 questions
  9. 5.11CatalysisNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Catalysts speed reactions without being consumed overall
  2. 2An alternative pathway has a lower activation energy
  3. 3Catalyst phases distinguish two common types of catalysis
  4. 4A catalyst is consumed and regenerated within a mechanism
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe