Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Environmental Science
  3. ›6 Energy Resources and Consumption
  4. ›6.12 Wind energy

AP Environmental Science · Unit 6 · Energy Resources and Consumption

6.12 Wind energy

Explain how wind turbines generate electricity, describe what controls their output, and weigh the benefits and drawbacks of wind energy.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Wind turbines convert moving air into electricity
  1. 1Wind turbines convert moving air into electricity
  2. 2Each turbine part has a job in the energy chain
  3. 3Wind speed and blade length control how much power a turbine delivers
  4. 4Capacity factor compares actual output with the maximum possible
  5. 5Location determines how much wind a turbine receives
  6. 6Wind energy offers clean power but has real limits
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Wind turbines convert moving air into electricity

A pinwheel spins when you blow on it. A wind turbine works in the same way on a much larger scale. Moving air pushes on its blades, and the blades turn a shaft.

The shaft drives a generator, a machine that converts the energy of motion into electrical energy. Inside it, magnets and coils of wire move relative to each other. This movement pushes charges through the wire as an electric current.

No fuel is burned. The energy of moving air is the only input, and the turbine releases no exhaust gases while it runs.

Key terms · tap one for its definition

wind turbine

A wind turbine is a machine that converts the kinetic energy of moving air into electrical energy through rotating blades and a generator.

generator

A generator is a device that converts mechanical energy into electrical energy by moving a conductor through a magnetic field.

Part 1 done

2

Part 2 of 6: Each turbine part has a job in the energy chain

Now follow the energy from the blades to the power line. Wind turns the blades first. Several other parts then carry the energy onward.

  • Blades: catch the wind and turn the hub.
  • Hub and shaft: carry the rotation into the housing at the top of the tower.
  • Gearbox: in many designs, raises the slow rotation to suit the generator.
  • Generator: turns the fast rotation into electricity.
  • Tower: lifts the machinery into stronger, steadier wind.
  • Transformer and cables: raise the voltage and carry power to the grid.
Figure 1. Wind turns the blades, and the rotation passes through the gearbox to the generator. Electricity then leaves toward the grid.

Exam tip

When asked how a turbine works, give the energy changes in order: moving air, rotation, then electrical energy.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the part of a wind turbine that converts rotational energy into electrical energy.
Show answer and explanation

Answer: A · Worked explanation

The generator moves magnets and coils of wire relative to each other, which produces an electric current. The gearbox only raises the rotation speed so the generator can work well. It does not make electricity itself. The tower and blades support and capture wind energy but do not produce current.
3

Part 3 of 6: Wind speed and blade length control how much power a turbine delivers

Now consider what decides the size of that output. Wind speed matters most. The power in wind rises with the cube of wind speed, so doubling the speed gives eight times the power.

Common mistake

Doubling the wind speed does not double the power. It multiplies the power by eight.

Blade length also matters. Longer blades sweep a larger circle, and that area grows with the square of the blade length. Doubling the blade length therefore gives four times the swept area.

These effects multiply. Taller towers reach faster wind, because wind speed usually increases with height. A turbine with long blades on a tall tower can produce far more than a small one. It must also stand in a windy place.

Part 3 done

4

Part 4 of 6: Capacity factor compares actual output with the maximum possible

A turbine’s rated power is what it produces in ideal wind. Rated power is measured in megawatts (MW), and energy produced is measured in megawatt-hours (MWh). Real output is lower, because wind rises and falls. Turbines also shut down in very weak wind and in dangerously strong wind.

The capacity factor shows how close a turbine comes to its maximum. It is the actual energy produced divided by the maximum possible, as a percentage: capacity factor=actual energymaximum energy×100%\mathrm{capacity\ factor}=\frac{\mathrm{actual\ energy}}{\mathrm{maximum\ energy}}\times100\%capacity factor=maximum energyactual energy​×100%.

Worked example

Calculating a capacity factor

A 2.0 MW turbine produces 4,380 MWh of electricity in one year of 8,760 hours. Calculate its capacity factor.
  1. 1
    Maximum energy = rated power × time.
  2. 2
    Maximum energy = 2.0 MW×8,760 h=17,520 MWh2.0\,\mathrm{MW}\times8{,}760\,\mathrm{h}=17{,}520\,\mathrm{MWh}2.0MW×8,760h=17,520MWh.
  3. 3
    Capacity factor = 4,380 MWh17,520 MWh×100%=25%\frac{4{,}380\,\mathrm{MWh}}{17{,}520\,\mathrm{MWh}}\times100\%=25\%17,520MWh4,380MWh​×100%=25%.

Answer: The capacity factor is 25%.

A capacity factor below 100% is normal for wind. It reflects changing wind, not a faulty turbine.

Key term

capacity factor

The capacity factor is the actual energy a turbine produces over a period divided by the maximum possible, as a percentage.

Part 4 done

Quick check

One question on the part you just read

Easy

Which feature is a benefit of wind power during normal operation?
Show answer and explanation

Answer: A · Worked explanation

Wind turbines use moving air rather than burned fuel, so they release no carbon dioxide or exhaust pollutants while running. Output is not constant, because wind speed varies. Turbines and their lines also need land, and blades can kill birds and bats, so the claim of no wildlife effect is wrong.
5

Part 5 of 6: Location determines how much wind a turbine receives

Because output depends so strongly on wind speed, site choice is a major decision. A group of turbines built together is a wind farm. Good sites share several features.

  • Open plains, ridge tops and coastlines with strong, steady wind
  • Offshore areas, where wind is often stronger and smoother
  • Few nearby obstacles such as hills, forests and tall buildings
  • Reasonable access to existing transmission lines

Turbines in a wind farm are spaced apart. Each turbine slows the air behind it, so close spacing would starve the next turbine of wind.

Offshore turbines cost more to build and maintain. Their steadier wind can partly offset that cost.

Key term

wind farm

A wind farm is a group of wind turbines built together to supply electricity to a grid.

Part 5 done

6

Part 6 of 6: Wind energy offers clean power but has real limits

Weighing these factors, wind energy has strong benefits and clear costs. Its main limit is that output is intermittent, meaning it starts, stops and varies with the weather.

Benefits and drawbacks of wind energy

BenefitsDrawbacks
No carbon dioxide or air pollutants from burned fuel while operatingOutput varies with wind, so it is intermittent
No fuel to mine, burn or transportSpinning blades can kill birds and bats
Almost no water needed to generate powerNoise and appearance can upset nearby residents
Land between turbines can still be farmed or grazedBest sites can be far from cities, so new power lines are needed
Low running costs once builtHigh upfront cost to build and connect
Benefits
No carbon dioxide or air pollutants from burned fuel while operating
Drawbacks
Output varies with wind, so it is intermittent
Benefits
No fuel to mine, burn or transport
Drawbacks
Spinning blades can kill birds and bats
Benefits
Almost no water needed to generate power
Drawbacks
Noise and appearance can upset nearby residents
Benefits
Land between turbines can still be farmed or grazed
Drawbacks
Best sites can be far from cities, so new power lines are needed
Benefits
Low running costs once built
Drawbacks
High upfront cost to build and connect

Neither list settles the question alone. Local wind, land use and wildlife all affect the decision. Several approaches cover calm periods. Batteries and other storage hold surplus power. A mix of other sources and wider grid connections also helps.

Common mistake

Wind energy is renewable, but that does not make it free of environmental impact. Turbines can harm birds and bats and change views.

Key term

intermittent

Intermittent describes a source that does not supply power at a steady rate, because its output starts, stops or varies.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe how a wind turbine produces electricity.

    Show mark schemeHide mark scheme

    Model answer

    Moving air pushes on the blades and turns the shaft. The rotating shaft drives a generator. The generator converts the energy of motion into electrical energy.

    • 1 mark for stating that moving air turns the blades
    • 1 mark for stating that the rotation drives a generator
    • 1 mark for stating that the generator converts motion energy into electrical energy
  2. 2.Explain[2 marks]

    Explain why a turbine on a tall tower in an open area usually produces more electricity.

    Show mark schemeHide mark scheme

    Model answer

    Wind speed is usually higher at greater height and in open areas with few obstacles. Power rises with the cube of wind speed, so a faster wind gives much more power.

    • 1 mark for stating that wind is faster higher up or where obstacles are few
    • 1 mark for linking faster wind to a large rise in power, since power rises with the cube of wind speed
  3. 3.Calculate[3 marks]

    Calculate the capacity factor of a 1.5 MW turbine that produces 4,599 MWh in a year of 8,760 hours.

    Show mark schemeHide mark scheme

    Model answer

    Maximum energy = 1.5 MW×8,760 h=13,140 MWh1.5\,\mathrm{MW}\times8{,}760\,\mathrm{h}=13{,}140\,\mathrm{MWh}1.5MW×8,760h=13,140MWh. Capacity factor = 4,59913,140×100%=35%\frac{4{,}599}{13{,}140}\times100\%=35\%13,1404,599​×100%=35%.

    • 1 mark for finding maximum energy of 13,140 MWh
    • 1 mark for dividing actual energy by maximum energy
    • 1 mark for giving the answer as 35%
  4. 4.Identify[2 marks]

    Identify two disadvantages of wind energy.

    Show mark schemeHide mark scheme

    Model answer

    Output is intermittent because wind varies. Blades can kill birds and bats. High upfront cost, noise and the need for new power lines are also acceptable.

    • 1 mark for identifying one valid disadvantage
    • 1 mark for identifying a second valid disadvantage
  5. 5.Justify[3 marks]

    Justify why developers often prefer open coastal or offshore sites to sheltered valleys for wind farms.

    Show mark schemeHide mark scheme

    Model answer

    Open coastal and offshore sites have stronger, steadier wind with fewer obstacles. Because power rises with the cube of wind speed, output is much higher. A higher capacity factor means more energy from each turbine.

    • 1 mark for stating that wind is stronger or steadier with fewer obstacles
    • 1 mark for linking wind speed to power output, which rises with the cube of wind speed
    • 1 mark for concluding that output or capacity factor is higher

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

Which term describes a power source whose output rises and falls with the weather?
Show answer and explanation

Answer: A · Worked explanation

An intermittent source does not deliver power at a steady rate. Wind output changes as wind speed changes. Renewable describes a resource that nature replaces, which is true of wind but says nothing about variation in output. Rated power is the output in ideal wind, not a description of variation.
4.

Medium·Predict[1 mark]

Predict how the power available in the wind changes if wind speed doubles from 5 m/s to 10 m/s.
Show answer and explanation

Answer: A · Worked explanation

Power in wind rises with the cube of wind speed. Doubling the speed gives 23=82^3=823=8 times the power. A factor of 4 comes from squaring the speed, but the relationship is a cube. Simple doubling would be true only if power were directly proportional to speed, which it is not.
5.

Medium·Calculate[2 marks]

Calculate the capacity factor of a 3.0 MW turbine that produces 7,884 MWh in a year of 8,760 hours.
Show answer and explanation

Answer: A · Worked explanation

Maximum energy is 3.0 MW×8,760 h=26,280 MWh3.0\,\mathrm{MW}\times8{,}760\,\mathrm{h}=26{,}280\,\mathrm{MWh}3.0MW×8,760h=26,280MWh. The capacity factor is 7,88426,280×100%=30%\frac{7{,}884}{26{,}280}\times100\%=30\%26,2807,884​×100%=30%. A value of 90% comes from dividing the energy by the number of hours only, which gives an average power of 0.9 MW and ignores the rating of the turbine. The value 70% is simply 100% minus 30%.
6.

Medium·Explain[1 mark]

Explain why a turbine on a taller tower usually produces more electricity.
Show answer and explanation

Answer: A · Worked explanation

Friction with the ground and obstacles slows air near the surface, so wind is usually faster higher up. Because power rises with the cube of wind speed, a modest gain in speed gives a large gain in power. Denser air would help, but air generally becomes thinner, not denser, with height.
7.

Medium[1 mark]

Which site would most likely give a turbine the highest capacity factor?
Show answer and explanation

Answer: A · Worked explanation

A high capacity factor needs strong, steady wind, and open ridge tops and coasts supply it with few obstacles. Forests and buildings slow and disturb the air, so a turbine near them runs below its rating more often. A sheltered cove has light breezes, so a turbine there would sit idle often.
8.

Hard·Calculate[2 marks]

A turbine’s blade length doubles and the wind speed also doubles. Swept area grows with the square of blade length, and wind power with the cube of wind speed. Calculate the factor by which the available power changes.
Show answer and explanation

Answer: A · Worked explanation

Swept area increases by 22=42^2=422=4 and the power in the wind by 23=82^3=823=8. These effects multiply, so the available power increases by 4×8=324\times8=324×8=32. The value 10 comes from adding 2 and 8 instead of multiplying, and 64 comes from cubing both changes.
9.

Hard·Determine[2 marks]

Determine which site produces more electricity in a year of 8,760 hours. Site X has a 2.0 MW turbine with a capacity factor of 40%. Site Y has a 3.0 MW turbine with a capacity factor of 25%.
Show answer and explanation

Answer: A · Worked explanation

Site X produces 2.0×8,760×0.40=7,008 MWh2.0\times8{,}760\times0.40=7{,}008\,\mathrm{MWh}2.0×8,760×0.40=7,008MWh. Site Y produces 3.0×8,760×0.25=6,570 MWh3.0\times8{,}760\times0.25=6{,}570\,\mathrm{MWh}3.0×8,760×0.25=6,570MWh. The difference is 438 MWh in favor of site X. Choosing site Y because of its larger rating ignores that actual output depends on the capacity factor. The value 7,008 MWh is the total for site X, not the difference between the sites.
10.

Hard[1 mark]

Which statement about wind energy is correct?
Show answer and explanation

Answer: A · Worked explanation

Wind turbines burn no fuel, so they emit no exhaust, but spinning blades can kill birds and bats. Being renewable does not remove every impact. Towers raise output by reaching faster wind but cannot make it constant. A capacity factor of 100% would need full-power wind every hour of the year.

Keep going

Next topic6.13 Energy conservationPrevious topic6.11 Hydrogen fuel cells

More in Unit 6 · Energy Resources and Consumption

  1. 6.5Fossil fuelsNotes · 10 questions
  2. 6.6Nuclear powerNotes · 10 questions
  3. 6.7Energy from biomassNotes · 10 questions
  4. 6.8Solar energyNotes · 10 questions
  5. 6.9Hydroelectric powerNotes · 10 questions
  6. 6.10Geothermal energyNotes · 10 questions
  7. 6.11Hydrogen fuel cellsNotes · 10 questions
  8. 6.12Wind energyNotes · 10 questions
  9. 6.13Energy conservationNotes · 10 questions

All AP Environmental Science topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/6 read

  1. 1Wind turbines convert moving air into electricity
  2. 2Each turbine part has a job in the energy chain
  3. 3Wind speed and blade length control how much power a turbine delivers
  4. 4Capacity factor compares actual output with the maximum possible
  5. 5Location determines how much wind a turbine receives
  6. 6Wind energy offers clean power but has real limits
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe