Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.4 Mechanics and materials
  4. ›3.4.1.1 Scalars and vectors

AQA A-level Physics · Section 3.4 · Mechanics and materials

3.4.1.1 Scalars and vectors

Distinguish scalar and vector quantities, add and subtract vectors, and resolve a vector into perpendicular components.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Scalars have size only, while vectors also have direction
  1. 1Scalars have size only, while vectors also have direction
  2. 2Distance and displacement describe the same journey differently
  3. 3Vectors add head to tail to give a resultant
  4. 4Subtracting a vector means adding its reverse
  5. 5A vector can be resolved into perpendicular components
  6. 6Components let you add vectors at any angle
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Scalars have size only, while vectors also have direction

Ask how much sugar is in a bag, and a number with a unit is enough. Ask how the bag moved, and you also need a direction. Physical quantities fall into two kinds for this reason.

A scalar quantity has magnitude only. A vector quantity has magnitude and direction. Magnitude is the size of a quantity, given with its unit.

Common scalar and vector quantities

ScalarsVectors
distancedisplacement
speedvelocity
massforce
energyacceleration
timemomentum
Scalars
distance
Vectors
displacement
Scalars
speed
Vectors
velocity
Scalars
mass
Vectors
force
Scalars
energy
Vectors
acceleration
Scalars
time
Vectors
momentum

Exam tip

A full vector answer gives a number, a unit and a direction, such as 5 N upwards. A scalar answer needs only the number and unit.

Key terms · tap one for its definition

scalar

A scalar quantity has magnitude but no direction.

vector

A vector quantity has both magnitude and direction.

Part 1 done

2

Part 2 of 6: Distance and displacement describe the same journey differently

Suppose you walk 4 m east and then 3 m north. The path you followed is 7 m long. You finish 5 m from where you started.

The total length of the path is the distance, so distance is a scalar. The straight-line change in position, with its direction, is the displacement. Displacement is a vector.

Walk once round a 400 m track. Your distance is 400 m, but your displacement is zero because you finish where you started.

Common mistake

Distance is not always the size of the displacement. They are equal only for a straight path in one direction.

Key terms · tap one for its definition

distance

The distance travelled is the total length of the path followed; it is a scalar measured in metres.

displacement

Displacement is the vector change in position from an initial position to a final position.

Part 2 done

Quick check

One question on the part you just read

Easy

Which of these quantities is a vector?
Show answer and explanation

Answer: C · Worked explanation

Force has a magnitude and a direction, so it is a vector. Time and mass are scalars with no direction at all. Speed is the tempting wrong choice because it sounds like velocity, but speed has magnitude only and is a scalar.
3

Part 3 of 6: Vectors add head to tail to give a resultant

Now take two displacements in a row, like the walk above. Draw the first as an arrow. Draw the second so that its tail starts at the head of the first.

The resultant is the single vector with the same effect as the vectors together. It runs from the tail of the first arrow to the head of the last. The order of adding does not change it.

Perpendicular vectors need only Pythagoras and trigonometry. Their resultant has magnitude R=x2+y2R=\sqrt{x^2+y^2}R=x2+y2​, and its angle satisfies tan⁡θ=yx\tan\theta=\frac{y}{x}tanθ=xy​.

Worked example

Adding two perpendicular displacements

A walker goes 4.0 m east and then 3.0 m north. Find the magnitude and direction of the resultant displacement.
  1. 1
    Draw the 4.0 m arrow east, then the 3.0 m arrow north from its head.
  2. 2
    The arrows are perpendicular, so R=(4.0 m)2+(3.0 m)2R=\sqrt{(4.0\,\mathrm{m})^2+(3.0\,\mathrm{m})^2}R=(4.0m)2+(3.0m)2​.
  3. 3
    Calculate: R=25 m2=5.0 mR=\sqrt{25\,\mathrm{m^2}}=5.0\,\mathrm{m}R=25m2​=5.0m.
  4. 4
    Find the angle from east: tan⁡θ=3.04.0\tan\theta=\frac{3.0}{4.0}tanθ=4.03.0​, so θ=37∘\theta=37^{\circ}θ=37∘.

Answer: The resultant displacement is 5.0 m5.0\,\mathrm{m}5.0m at 37∘37^{\circ}37∘ north of east.

Vectors in the same direction add their magnitudes. Vectors in opposite directions partly cancel, and equal opposite vectors give a zero resultant.

Key term

resultant

The resultant of several vectors is the single vector that has the same effect as all of them acting together.

Part 3 done

4

Part 4 of 6: Subtracting a vector means adding its reverse

Adding is only half the job, because a change is always final minus initial. To subtract bbb from aaa, reverse the direction of bbb and add it to aaa. In symbols, a−b=a+(−b)a-b=a+(-b)a−b=a+(−b).

Reversing a vector keeps its magnitude and flips its direction. In one dimension, choose a positive direction and give each vector a sign. Velocity here means speed in a stated direction.

Worked example

Change in velocity

A ball travelling at 5.0 m s−15.0\,\mathrm{m\,s^{-1}}5.0ms−1 east rebounds from a wall at 3.0 m s−13.0\,\mathrm{m\,s^{-1}}3.0ms−1 west. Find its change in velocity.
  1. 1
    Take east as positive, so the initial velocity is +5.0 m s−1+5.0\,\mathrm{m\,s^{-1}}+5.0ms−1.
  2. 2
    The final velocity is −3.0 m s−1-3.0\,\mathrm{m\,s^{-1}}−3.0ms−1.
  3. 3
    Change = final minus initial: (−3.0)−(+5.0)=−8.0 m s−1(-3.0)-(+5.0)=-8.0\,\mathrm{m\,s^{-1}}(−3.0)−(+5.0)=−8.0ms−1.

Answer: The change in velocity is 8.0 m s−18.0\,\mathrm{m\,s^{-1}}8.0ms−1 west.

Common mistake

A minus sign on a vector shows direction only. A value of −8.0 m s−1-8.0\,\mathrm{m\,s^{-1}}−8.0ms−1 is larger in size than +5.0 m s−1+5.0\,\mathrm{m\,s^{-1}}+5.0ms−1.

Part 4 done

Quick check

One question on the part you just read

Easy

Which pair contains only scalar quantities?
Show answer and explanation

Answer: A · Worked explanation

Mass and energy have magnitude only, so both are scalars. Displacement, force and momentum are vectors because each has a direction. The pair of distance and displacement is tempting, because the two words sound alike. It mixes one scalar with one vector, so it fails the test.
5

Part 5 of 6: A vector can be resolved into perpendicular components

Adding combines vectors into one. Resolving does the opposite. Imagine pulling a suitcase with a handle held above the horizontal. Only part of your pull moves the case forwards, and the rest lifts the handle.

To resolve a vector is to split it into two perpendicular components. For a vector FFF at angle θ\thetaθ above the horizontal, the horizontal component is Fcos⁡θF\cos\thetaFcosθ. The vertical component is Fsin⁡θF\sin\thetaFsinθ.

Figure 1. The horizontal component is F cos θ and the vertical component is F sin θ, with θ measured from the horizontal.

Exam tip

Check where the angle is measured from. If θ\thetaθ is measured from the vertical, cosine and sine swap places.

Worked example

Resolving a force

A rope pulls a sledge with a force of 50 N at 30∘30^{\circ}30∘ above the horizontal. Find the horizontal and vertical components.
  1. 1
    Horizontal component =Fcos⁡θ=50 N×cos⁡30∘=43 N=F\cos\theta=50\,\mathrm{N}\times\cos30^{\circ}=43\,\mathrm{N}=Fcosθ=50N×cos30∘=43N.
  2. 2
    Vertical component =Fsin⁡θ=50 N×sin⁡30∘=25 N=F\sin\theta=50\,\mathrm{N}\times\sin30^{\circ}=25\,\mathrm{N}=Fsinθ=50N×sin30∘=25N.

Answer: The components are 43 N43\,\mathrm{N}43N horizontally and 25 N25\,\mathrm{N}25N vertically.

Key terms · tap one for its definition

resolve

To resolve a vector is to split it into two perpendicular components that together have the same effect as the original.

components

The components of a vector are the effective parts of it along two chosen perpendicular directions.

Part 5 done

6

Part 6 of 6: Components let you add vectors at any angle

Pythagoras worked above because the vectors were perpendicular. Components remove that limit. Resolve every vector along the same two perpendicular axes.

Exam tip

Write the axes and the positive directions at the start. Keep a sign with every component, so that west or downward components are negative.

Add all the horizontal components, then add all the vertical components. These sums are the components RxR_xRx​ and RyR_yRy​ of the resultant. Then R=Rx2+Ry2R=\sqrt{R_x^2+R_y^2}R=Rx2​+Ry2​​ and tan⁡θ=RyRx\tan\theta=\frac{R_y}{R_x}tanθ=Rx​Ry​​. The method works for any number of vectors, pointing in any directions. Each vector is reduced to just two numbers.

Worked example

Adding forces at an angle

A force F1=20 NF_1=20\,\mathrm{N}F1​=20N acts at 60∘60^{\circ}60∘ above east. A force F2=10 NF_2=10\,\mathrm{N}F2​=10N acts east. Find the resultant.
  1. 1
    East components: Rx=20cos⁡60∘+10=10+10=20 NR_x=20\cos60^{\circ}+10=10+10=20\,\mathrm{N}Rx​=20cos60∘+10=10+10=20N.
  2. 2
    North components: Ry=20sin⁡60∘=17 NR_y=20\sin60^{\circ}=17\,\mathrm{N}Ry​=20sin60∘=17N.
  3. 3
    Magnitude: R=202+17.32=700=26 NR=\sqrt{20^2+17.3^2}=\sqrt{700}=26\,\mathrm{N}R=202+17.32​=700​=26N.
  4. 4
    Angle: tan⁡θ=17.320\tan\theta=\frac{17.3}{20}tanθ=2017.3​, so θ=41∘\theta=41^{\circ}θ=41∘.

Answer: The resultant is 26 N26\,\mathrm{N}26N at 41∘41^{\circ}41∘ above east.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what is meant by a vector quantity and give two examples.

    Show mark schemeHide mark scheme

    Model answer

    A vector quantity has both magnitude and direction. Examples are force and displacement.

    • 1 mark for stating that a vector has magnitude and direction
    • 1 mark for giving two correct examples, such as force, velocity, displacement or acceleration
  2. 2.Compare[3 marks]

    Compare the distance and the displacement of a runner who completes one full lap of a 400 m track.

    Show mark schemeHide mark scheme

    Model answer

    The distance is 400 m, the total length of the path, and it is a scalar. The displacement is zero because the runner finishes at the starting point. Displacement is a vector.

    • 1 mark for stating that the distance is 400 m
    • 1 mark for stating that the displacement is zero because start and finish are the same point
    • 1 mark for identifying distance as a scalar and displacement as a vector
  3. 3.Calculate[4 marks]

    Calculate the magnitude and direction of the resultant of a 6.0 N force acting east and an 8.0 N force acting north.

    Show mark schemeHide mark scheme

    Model answer

    R=6.02+8.02=10 NR=\sqrt{6.0^2+8.0^2}=10\,\mathrm{N}R=6.02+8.02​=10N. The angle from east is given by tan⁡θ=8.06.0\tan\theta=\frac{8.0}{6.0}tanθ=6.08.0​, so θ=53∘\theta=53^{\circ}θ=53∘. The resultant is 10 N at 53∘53^{\circ}53∘ north of east.

    • 1 mark for using Pythagoras for the magnitude
    • 1 mark for obtaining 10 N
    • 1 mark for using tan⁡θ=8.06.0\tan\theta=\frac{8.0}{6.0}tanθ=6.08.0​ for the angle
    • 1 mark for giving the direction as 53∘53^{\circ}53∘ north of east
  4. 4.Calculate[2 marks]

    Calculate the vertical component of a 40 N force acting at 25∘25^{\circ}25∘ above the horizontal.

    Show mark schemeHide mark scheme

    Model answer

    Vertical component =Fsin⁡θ=40 N×sin⁡25∘=17 N=F\sin\theta=40\,\mathrm{N}\times\sin25^{\circ}=17\,\mathrm{N}=Fsinθ=40N×sin25∘=17N.

    • 1 mark for using Fsin⁡θF\sin\thetaFsinθ with the angle from the horizontal
    • 1 mark for obtaining 17 N
  5. 5.Explain[3 marks]

    Explain why two forces of 5.0 N can have a resultant of either 0 N or 10 N.

    Show mark schemeHide mark scheme

    Model answer

    Forces are vectors, so their directions matter. If both act in the same direction their magnitudes add to 10 N. If they act in opposite directions they cancel, giving 0 N.

    • 1 mark for stating that forces are vectors so direction affects the resultant
    • 1 mark for explaining that forces in the same direction add to give 10 N
    • 1 mark for explaining that equal opposite forces cancel to give 0 N

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Calculate[1 mark]

Calculate the total distance walked by a student who goes 3.0 m east and then 4.0 m north.
Show answer and explanation

Answer: A · Worked explanation

Distance is the total length of the path, so 3.0 m+4.0 m=7.0 m3.0\,\mathrm{m}+4.0\,\mathrm{m}=7.0\,\mathrm{m}3.0m+4.0m=7.0m. The value 5.0 m is the size of the displacement, found with Pythagoras. That answers a different question, because it measures the straight line from start to finish, not the path the student actually walked.
4.

Medium·Calculate[2 marks]

Calculate the magnitude of the resultant of a 9.0 N force acting east and a 12 N force acting north.
Show answer and explanation

Answer: A · Worked explanation

The forces are perpendicular, so R=9.02+122=225=15 NR=\sqrt{9.0^2+12^2}=\sqrt{225}=15\,\mathrm{N}R=9.02+122​=225​=15N. The value 21 N comes from adding the magnitudes, which only works for forces in the same direction. The value 225 N comes from forgetting the final square root. The value 3.0 N comes from subtracting the forces, which would apply only if they pointed in opposite directions.
5.

Medium·Calculate[2 marks]

A force of 80 N acts at 60∘60^{\circ}60∘ above the horizontal. Calculate its horizontal component.
Show answer and explanation

Answer: A · Worked explanation

The horizontal component is 80 N×cos⁡60∘=40 N80\,\mathrm{N}\times\cos60^{\circ}=40\,\mathrm{N}80N×cos60∘=40N. The value 69 N is the vertical component, 80 N×sin⁡60∘80\,\mathrm{N}\times\sin60^{\circ}80N×sin60∘, so it comes from swapping sine and cosine. The value 80 N is the full force, which would be the horizontal component only if the force were exactly horizontal. The wrong angle function also changes the size.
6.

Medium[2 marks]

A velocity has components 3.0 m s−13.0\,\mathrm{m\,s^{-1}}3.0ms−1 east and 4.0 m s−14.0\,\mathrm{m\,s^{-1}}4.0ms−1 north. What is the angle between the resultant velocity and east?
Show answer and explanation

Answer: A · Worked explanation

The angle from east satisfies tan⁡θ=4.03.0\tan\theta=\frac{4.0}{3.0}tanθ=3.04.0​, so θ=53∘\theta=53^{\circ}θ=53∘. The value 37∘37^{\circ}37∘ is the angle from north, found by dividing the components the wrong way round. The value 45∘45^{\circ}45∘ would need equal components, and these components are not equal, so the resultant leans more towards north than east.
7.

Medium·Calculate[2 marks]

A trolley moving at 4.0 m s−14.0\,\mathrm{m\,s^{-1}}4.0ms−1 east rebounds at 1.5 m s−11.5\,\mathrm{m\,s^{-1}}1.5ms−1 west. Calculate its change in velocity.
Show answer and explanation

Answer: A · Worked explanation

Take east as positive. The change is final minus initial, so (−1.5)−(+4.0)=−5.5 m s−1(-1.5)-(+4.0)=-5.5\,\mathrm{m\,s^{-1}}(−1.5)−(+4.0)=−5.5ms−1, which is 5.5 m s−15.5\,\mathrm{m\,s^{-1}}5.5ms−1 west. The value 2.5 comes from subtracting the sizes, 4.0−1.54.0-1.54.0−1.5, and ignoring the reversal of direction. A rebound changes the sign of the velocity, so the two sizes must be added.
8.

Hard·Calculate[2 marks]

Two forces of 10 N act on an object, with 120∘120^{\circ}120∘ between their directions. Calculate the magnitude of the resultant.
Show answer and explanation

Answer: A · Worked explanation

Put one force along the axis. The sum of the components along it is 10+10cos⁡120∘=5.0 N10+10\cos120^{\circ}=5.0\,\mathrm{N}10+10cos120∘=5.0N. The perpendicular sum is 10sin⁡120∘=8.66 N10\sin120^{\circ}=8.66\,\mathrm{N}10sin120∘=8.66N. So R=5.02+8.662=10 NR=\sqrt{5.0^2+8.66^2}=10\,\mathrm{N}R=5.02+8.662​=10N. The value 17 N is the resultant when the forces are 60∘60^{\circ}60∘ apart, and 20 N applies only when they point the same way.
9.

Hard[2 marks]

A 3.0 N force acts east and a 4.0 N force acts north on a stationary object. A third force makes the resultant zero. Which describes the third force?
Show answer and explanation

Answer: A · Worked explanation

The first two forces have a resultant of 5.0 N at 53∘53^{\circ}53∘ north of east. A zero total needs an equal force in the opposite direction, which is 53∘53^{\circ}53∘ south of west. The value 7.0 N comes from adding magnitudes. The option with 37∘37^{\circ}37∘ uses the angle from north.
10.

Hard·Calculate[2 marks]

A 40 N force has a horizontal component of 20 N. Calculate its vertical component.
Show answer and explanation

Answer: A · Worked explanation

The components and the force form a right-angled triangle, so 402−202=1200=35 N\sqrt{40^2-20^2}=\sqrt{1200}=35\,\mathrm{N}402−202​=1200​=35N. The value 45 N comes from adding the squares instead of subtracting them. The value 20 N assumes both components are equal, which would need an angle of 45∘45^{\circ}45∘.

Keep going

Next topic3.4.1.2 MomentsPrevious topic3.3.2.3 Refraction at a plane surface

More in Section 3.4 · Mechanics and materials

  1. 3.4.1.1Scalars and vectorsNotes · 10 questions
  2. 3.4.1.2MomentsNotes · 10 questions
  3. 3.4.1.3Motion in a straight lineNotes · 10 questions
  4. 3.4.1.4Projectile motionNotes · 10 questions
  5. 3.4.1.5Newton's laws of motionNotes · 10 questions
  6. 3.4.1.6MomentumNotes · 10 questions
  7. 3.4.1.7Work, energy and powerNotes · 10 questions
  8. 3.4.1.8Conservation of energyNotes · 9 questions
  9. 3.4.2.1Bulk properties of solidsNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1Scalars have size only, while vectors also have direction
  2. 2Distance and displacement describe the same journey differently
  3. 3Vectors add head to tail to give a resultant
  4. 4Subtracting a vector means adding its reverse
  5. 5A vector can be resolved into perpendicular components
  6. 6Components let you add vectors at any angle
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe