AQA A-level Physics · Section 3.4 · Mechanics and materials
3.4.1.7 Work, energy and power
Calculate work done, kinetic and potential energy changes and power, and use these equations in practical problems.
1/5Work is done when a force moves an object
Part 1 of 5: Work is done when a force moves an object
Pushing a stalled car along a road is tiring, even when it moves slowly. Energy is being transferred from you to the car as it moves.
The work done by a force measures this energy transfer. When the force acts along the movement, . Here is the work done and is the force in newtons. The distance moved in the direction of the force is .
Work is measured in the joule, J. A force that causes no movement does no work. Holding a heavy bag still transfers no energy to it, however tiring it feels.
Key terms · tap one for its definition
work done
Work done by a force is the energy transferred when its component along a displacement acts through that displacement.
joule
The joule is the unit of work and energy, equal to the work done when a force of moves its point of application along the force.
Part 2 of 5: Only the part of a force along the movement does work
Often a force does not point along the movement. A child pulls a sledge using a rope held above the ground. Only the part of the pull that points along the ground moves the sledge forwards.
For a force at angle to the movement, . When , this becomes . A force at right angles to the movement does no work, because .
Worked example
Pulling a sledge
- Word equation: work done = force × distance moved in the direction of the force.
- Symbol equation: .
- Substitute: .
- Evaluate: .
Answer: .

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: B · Worked explanation
Part 3 of 5: Moving and raised objects store energy they can transfer
Work transfers energy, so an object that has work done on it gains energy. A moving car stores energy because of its speed.
A moving object has kinetic energy, . Here is the mass in kilograms and is the speed in . Doubling the speed makes the kinetic energy four times larger.
A raised object has gravitational potential energy because of its position in a gravitational field. Near the Earth’s surface, . The gravitational field strength is the force per kilogram, , and is the change in height.
Worked example
Lifting a box
- Word equation: change in potential energy = mass × field strength × change in height.
- Symbol equation: .
- Substitute: .
- Evaluate: .
Answer: .
Key terms · tap one for its definition
kinetic energy
Kinetic energy is the energy an object has due to its motion, equal to and measured in joules.
gravitational potential energy
Gravitational potential energy is the energy an object stores because of its position in a gravitational field.
Part 4 of 5: Power measures how fast work is done
Two people can lift the same box to the same height, yet one does it faster. They do the same work, but their power differs.
The power of a process is how quickly it transfers energy. In symbols, . The unit of power is the watt, W.
Power depends on time. A machine with twice the power does the same work in half the time.
Suppose a constant force moves an object at constant speed along the force. In time it moves . So .
Worked example
Power of a lifting motor
- Work done .
- Symbol equation: .
- Substitute: .
Answer: .
Key terms · tap one for its definition
power
Power is the rate at which work is done or energy is transferred.
watt
The watt is the unit of power, equal to .

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 5 of 5: Energy and power equations combine to solve practical problems
Now that all the equations are in place, the table collects them. Choose the one that links the quantities you are given.
Equations for work, energy and power
- Quantity
- Work done
- Equation
- Unit
- J
- Quantity
- Kinetic energy
- Equation
- Unit
- J
- Quantity
- Potential energy change
- Equation
- Unit
- J
- Quantity
- Power
- Equation
- Unit
- W
Real machines waste some energy, so useful output is less than total input. The efficiency of a machine compares the two. It can be found from energy or from power.
Worked example
Efficiency of the motor
- Word equation: efficiency = useful output power divided by total input power.
- Substitute: .
- Evaluate: 0.82, or .
Answer: The efficiency is 0.82, which is .
Efficiency has no unit. It is a number between 0 and 1, or a percentage. Input and output must use the same unit, such as joules or watts.
Key term
efficiency
Efficiency is the useful energy output divided by the total energy input, often given as a percentage.
Check your recall[14 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.State[2 marks]
State what is meant by work done by a force.
Show mark schemeHide mark scheme
Model answer
Work done is the energy transferred when the force acts through a displacement. Only the part of the force along the displacement counts.
- 1 mark for stating that work done is an energy transfer
- 1 mark for stating that it involves the part of the force along the displacement acting through that displacement
- 2.Calculate[2 marks]
A force of acts at to the direction in which a trolley moves . Calculate the work done.
Show mark schemeHide mark scheme
Model answer
.
- 1 mark for using with correct substitution
- 1 mark for giving
- 3.Calculate[2 marks]
Calculate the kinetic energy of a car moving at .
Show mark schemeHide mark scheme
Model answer
.
- 1 mark for using with correct substitution
- 1 mark for giving
- 4.Calculate[4 marks]
A motor lifts a load through in at constant speed. Calculate the useful power output of the motor.
Show mark schemeHide mark scheme
Model answer
. .
- 1 mark for using
- 1 mark for obtaining or about
- 1 mark for using
- 1 mark for giving
- 5.Explain[2 marks]
Explain why a force at right angles to the movement of an object does no work.
Show mark schemeHide mark scheme
Model answer
Work done is . At right angles and , so the force has no part along the movement and transfers no energy.
- 1 mark for stating that and
- 1 mark for stating that there is no part of the force along the movement
- 6.Suggest[2 marks]
Suggest why the efficiency of a real machine is always less than 100%.
Show mark schemeHide mark scheme
Model answer
Some input energy is transferred to other stores, such as thermal energy in the surroundings, through friction. This energy is not useful output, so useful output is less than total input.
- 1 mark for stating that some energy is transferred to thermal energy or other wasted stores
- 1 mark for stating that this energy is not useful output so output is less than input

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyIdentify[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: D · Worked explanation
Medium[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: C · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: A · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: C · Worked explanation
HardCalculate[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardIdentify[1 mark]
Show answer and explanation
Answer: B · Worked explanation