Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.4 Mechanics and materials
  4. ›3.4.2.1 Bulk properties of solids

AQA A-level Physics · Section 3.4 · Mechanics and materials

3.4.2.1 Bulk properties of solids

Calculate density, describe elasticity and tensile strength, and interpret force–extension graphs for brittle, ductile and plastic behaviour.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Density compares the mass of a material with its volume
  1. 1Density compares the mass of a material with its volume
  2. 2Hooke’s law links force and extension for a spring
  3. 3Elastic materials return to their shape when unloaded
  4. 4Brittle and ductile materials break in different ways
  5. 5Force–extension graphs show stiffness and stored energy
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Density compares the mass of a material with its volume

Hold a brick in one hand and a similar-sized block of polystyrene in the other. The brick feels far heavier because more mass is packed into the same space. Density measures this, and it belongs to the material, not to the size of the object.

To find a density, measure the mass with a balance. Find the volume from a ruler for a regular shape, or by displacement for an irregular one. Then use ρ=mV\rho=\frac{m}{V}ρ=Vm​, with mass in kg and volume in m3\mathrm{m^{3}}m3.

Exam tip

Convert before you divide. Use 1 cm3=1×10−6 m31\,\mathrm{cm^{3}}=1\times10^{-6}\,\mathrm{m^{3}}1cm3=1×10−6m3 and 1 g=10−3 kg1\,\mathrm{g}=10^{-3}\,\mathrm{kg}1g=10−3kg.

Worked example

Density of a metal block

A block measures 5.0 cm by 4.0 cm by 2.0 cm and has a mass of 108 g. Calculate its density.
  1. 1
    Volume = length × width × height =5.0×4.0×2.0=40 cm3=4.0×10−5 m3=5.0\times4.0\times2.0=40\,\mathrm{cm^{3}}=4.0\times10^{-5}\,\mathrm{m^{3}}=5.0×4.0×2.0=40cm3=4.0×10−5m3.
  2. 2
    Convert the mass: 108 g=0.108 kg108\,\mathrm{g}=0.108\,\mathrm{kg}108g=0.108kg.
  3. 3
    Word equation: density = mass divided by volume, so ρ=mV\rho=\frac{m}{V}ρ=Vm​.
  4. 4
    Substitute: ρ=0.108 kg4.0×10−5 m3\rho=\frac{0.108\,\mathrm{kg}}{4.0\times10^{-5}\,\mathrm{m^{3}}}ρ=4.0×10−5m30.108kg​.

Answer: The density is 2.7×103 kg m−32.7\times10^{3}\,\mathrm{kg\,m^{-3}}2.7×103kgm−3.

Key term

density

Density is mass per unit volume, ρ=mV\rho=\frac{m}{V}ρ=Vm​, measured in kg m−3\mathrm{kg\,m^{-3}}kgm−3.

Part 1 done

2

Part 2 of 5: Hooke’s law links force and extension for a spring

Now hang masses from a spring. Each extra mass stretches it further. For small loads the extension is proportional to the force. This is Hooke’s law, written F=kΔLF=k\Delta LF=kΔL.

Here FFF is the force in newtons and ΔL\Delta LΔL is the extension in metres. The spring constant kkk describes how stiff the spring is. A stiff spring has a large value of kkk.

The law holds only up to the limit of proportionality. Beyond that point the force–extension graph is no longer a straight line.

Key terms · tap one for its definition

Hooke’s law

Hooke’s law states that the extension of a material is proportional to the force applied, provided the limit of proportionality is not exceeded.

spring constant

The spring constant kkk is the force per unit extension, k=FΔLk=\frac{F}{\Delta L}k=ΔLF​, measured in N m−1\mathrm{N\,m^{-1}}Nm−1.

limit of proportionality

The limit of proportionality is the point beyond which force is no longer directly proportional to extension.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the SI unit of density.
Show answer and explanation

Answer: A · Worked explanation

Density is mass divided by volume, so its unit is kilograms divided by cubic metres, written kg m−3\mathrm{kg\,m^{-3}}kgm−3. The unit m3 kg−1\mathrm{m^{3}\,kg^{-1}}m3kg−1 is the reciprocal of this. It would measure the volume taken up by each kilogram, which is a different quantity from density.
3

Part 3 of 5: Elastic materials return to their shape when unloaded

Think of a rubber band after a gentle pull. It goes back to its original length. This is elasticity, and a material that behaves like this is elastic.

Push a spring too far and it stays stretched. The force at which this starts is the elastic limit. Beyond it, the material shows plastic deformation, which is permanent.

A material that deforms plastically keeps its new shape. Modelling clay is a familiar example.

Common mistake

The elastic limit and the limit of proportionality are not always the same point. A material can still be elastic after it stops obeying Hooke’s law.

Key terms · tap one for its definition

elasticity

Elasticity is the ability of a material to return to its original shape once the deforming force is removed.

elastic limit

The elastic limit is the greatest force or extension from which a material still fully recovers its original length.

plastic deformation

Plastic deformation is a permanent change in shape that remains after the deforming force is removed.

Part 3 done

4

Part 4 of 5: Brittle and ductile materials break in different ways

Glass and copper wire both break eventually, but not in the same way. A brittle material fractures suddenly, with almost no plastic deformation first. Its force–extension graph is a straight line that stops at the break.

A ductile material extends plastically by a large amount before it breaks. It can be drawn out into a wire.

Brittle and ductile materials compared

FeatureBrittleDuctile
Plastic deformationLittle or noneLarge
Warning before failureAlmost noneClear stretching
ExampleGlassCopper
Feature
Plastic deformation
Brittle
Little or none
Ductile
Large
Feature
Warning before failure
Brittle
Almost none
Ductile
Clear stretching
Feature
Example
Brittle
Glass
Ductile
Copper

The tensile strength of a material tells you how much stretching force it can survive. A high value means a large force per unit area is needed to break it. It is measured in pascals, where 1 Pa=1 N m−21\,\mathrm{Pa}=1\,\mathrm{N\,m^{-2}}1Pa=1Nm−2.

Figure 1. The brittle sample is stiffer and breaks after a small extension. The ductile sample curves after its limit of proportionality and extends much further.

Key terms · tap one for its definition

brittle

A brittle material breaks without significant plastic deformation, so its extension before fracture stays small.

ductile

A ductile material shows a large amount of plastic deformation before it fractures, so it can be drawn into wires.

tensile strength

The tensile strength of a material is the maximum tensile force per unit cross-sectional area it can bear before it breaks.

Part 4 done

Quick check

One question on the part you just read

Easy

State what is meant by the elasticity of a material.
Show answer and explanation

Answer: B · Worked explanation

Elasticity is the ability of a material to return to its original shape once the deforming force is removed. Resisting breaking up to a maximum force per unit area describes the tensile strength, which is a different property. A permanent change in shape after unloading is plastic deformation, the opposite of elastic behaviour.
5

Part 5 of 5: Force–extension graphs show stiffness and stored energy

Return to the graph. The gradient of the straight part is k=FΔLk=\frac{F}{\Delta L}k=ΔLF​, so a steeper line means a stiffer sample. Where the line curves, the limit of proportionality has been passed.

Unloading shows what kind of deformation occurred. Within the elastic limit the unloading line retraces the loading line. After plastic deformation it returns along a parallel line and ends at a non-zero extension.

Exam tip

When you interpret a graph, say what the gradient and the area represent, and give their units.

The area under the graph is the work done in stretching. Within the elastic limit this is stored as elastic strain energy, Ee=12FΔLE_\mathrm{e}=\frac{1}{2}F\Delta LEe​=21​FΔL.

Worked example

Spring constant and stored energy

A spring extends by 40 mm when a force of 6.0 N is applied. It obeys Hooke’s law. Calculate kkk and the elastic strain energy stored.
  1. 1
    Convert the extension: 40 mm=0.040 m40\,\mathrm{mm}=0.040\,\mathrm{m}40mm=0.040m.
  2. 2
    Rearrange Hooke’s law: k=FΔLk=\frac{F}{\Delta L}k=ΔLF​.
  3. 3
    Substitute: k=6.0 N0.040 m=1.5×102 N m−1k=\frac{6.0\,\mathrm{N}}{0.040\,\mathrm{m}}=1.5\times10^{2}\,\mathrm{N\,m^{-1}}k=0.040m6.0N​=1.5×102Nm−1.
  4. 4
    Energy: Ee=12FΔL=12×6.0 N×0.040 m=0.12 JE_\mathrm{e}=\frac{1}{2}F\Delta L=\frac{1}{2}\times6.0\,\mathrm{N}\times0.040\,\mathrm{m}=0.12\,\mathrm{J}Ee​=21​FΔL=21​×6.0N×0.040m=0.12J.

Answer: k=1.5×102 N m−1k=1.5\times10^{2}\,\mathrm{N\,m^{-1}}k=1.5×102Nm−1 and Ee=0.12 JE_\mathrm{e}=0.12\,\mathrm{J}Ee​=0.12J.

Key term

elastic strain energy

Elastic strain energy EeE_\mathrm{e}Ee​ is the energy stored in a material deformed within its elastic limit, measured in joules.

Note read

Check your recall[16 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what is meant by density and give its SI unit.

    Show mark schemeHide mark scheme

    Model answer

    Density is mass per unit volume. Its unit is kg m−3\mathrm{kg\,m^{-3}}kgm−3.

    • 1 mark for stating that density is mass per unit volume
    • 1 mark for giving the unit as kg m−3\mathrm{kg\,m^{-3}}kgm−3
  2. 2.Calculate[3 marks]

    Calculate the density of a block of mass 0.45 kg0.45\,\mathrm{kg}0.45kg and volume 5.0×10−5 m35.0\times10^{-5}\,\mathrm{m^{3}}5.0×10−5m3.

    Show mark schemeHide mark scheme

    Model answer

    ρ=mV=0.45 kg5.0×10−5 m3=9.0×103 kg m−3\rho=\frac{m}{V}=\frac{0.45\,\mathrm{kg}}{5.0\times10^{-5}\,\mathrm{m^{3}}}=9.0\times10^{3}\,\mathrm{kg\,m^{-3}}ρ=Vm​=5.0×10−5m30.45kg​=9.0×103kgm−3.

    • 1 mark for using ρ=mV\rho=\frac{m}{V}ρ=Vm​
    • 1 mark for substituting the mass and volume correctly
    • 1 mark for obtaining 9.0×103 kg m−39.0\times10^{3}\,\mathrm{kg\,m^{-3}}9.0×103kgm−3
  3. 3.Compare[3 marks]

    Compare the behaviour of a brittle material and a ductile material when each is stretched until it breaks.

    Show mark schemeHide mark scheme

    Model answer

    A brittle material fractures suddenly with little or no plastic deformation, so its extension stays small. A ductile material deforms plastically by a large amount before it breaks. It therefore gives clear visible stretching before failure.

    • 1 mark for stating that a brittle material shows little or no plastic deformation before fracture
    • 1 mark for stating that a ductile material shows a large plastic deformation before breaking
    • 1 mark for linking brittle failure to sudden fracture or ductile failure to visible stretching first
  4. 4.Explain[2 marks]

    Explain why a wire stretched beyond its elastic limit does not return to its original length.

    Show mark schemeHide mark scheme

    Model answer

    Beyond the elastic limit the wire undergoes plastic deformation. This is a permanent change, so some extension remains when the force is removed.

    • 1 mark for stating that plastic deformation occurs beyond the elastic limit
    • 1 mark for stating that the change is permanent so extension remains after unloading
  5. 5.Describe[3 marks]

    Describe the force–extension graph of a ductile metal wire from zero force up to the point where it breaks.

    Show mark schemeHide mark scheme

    Model answer

    The graph begins as a straight line through the origin, with gradient kkk, up to the limit of proportionality. It then curves with a smaller gradient as plastic deformation occurs. The wire extends a long way before it breaks.

    • 1 mark for describing a straight line through the origin up to the limit of proportionality
    • 1 mark for describing a curve with decreasing gradient beyond that point
    • 1 mark for stating that the extension before breaking is large
  6. 6.Calculate[3 marks]

    A spring has k=250 N m−1k=250\,\mathrm{N\,m^{-1}}k=250Nm−1. Calculate the elastic strain energy stored when it is extended by 0.060 m0.060\,\mathrm{m}0.060m within its elastic limit.

    Show mark schemeHide mark scheme

    Model answer

    F=kΔL=250×0.060=15 NF=k\Delta L=250\times0.060=15\,\mathrm{N}F=kΔL=250×0.060=15N. Then Ee=12FΔL=12×15 N×0.060 m=0.45 JE_\mathrm{e}=\frac{1}{2}F\Delta L=\frac{1}{2}\times15\,\mathrm{N}\times0.060\,\mathrm{m}=0.45\,\mathrm{J}Ee​=21​FΔL=21​×15N×0.060m=0.45J.

    • 1 mark for finding the force using F=kΔLF=k\Delta LF=kΔL (15 N15\,\mathrm{N}15N)
    • 1 mark for using Ee=12FΔLE_\mathrm{e}=\frac{1}{2}F\Delta LEe​=21​FΔL
    • 1 mark for obtaining 0.45 J0.45\,\mathrm{J}0.45J

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the best description of a brittle material.
Show answer and explanation

Answer: C · Worked explanation

A brittle material breaks suddenly and shows almost no plastic deformation first, so there is little warning of failure. The ability to be drawn into a long wire describes a ductile material, which deforms plastically by a large amount before it breaks. Brittleness has no link to density.
4.

Medium·Calculate[1 mark]

A rectangular block measures 0.10 m0.10\,\mathrm{m}0.10m by 0.050 m0.050\,\mathrm{m}0.050m by 0.020 m0.020\,\mathrm{m}0.020m and has a mass of 0.79 kg0.79\,\mathrm{kg}0.79kg. Calculate its density.
Show answer and explanation

Answer: D · Worked explanation

The volume is 0.10×0.050×0.020=1.0×10−4 m30.10\times0.050\times0.020=1.0\times10^{-4}\,\mathrm{m^{3}}0.10×0.050×0.020=1.0×10−4m3. Then ρ=mV=0.791.0×10−4=7.9×103 kg m−3\rho=\frac{m}{V}=\frac{0.79}{1.0\times10^{-4}}=7.9\times10^{3}\,\mathrm{kg\,m^{-3}}ρ=Vm​=1.0×10−40.79​=7.9×103kgm−3. The value 7.9×10−57.9\times10^{-5}7.9×10−5 comes from multiplying mass by volume instead of dividing. The value 7.9×10−37.9\times10^{-3}7.9×10−3 comes from dividing by 100 cm3100\,\mathrm{cm^{3}}100cm3 without converting the volume to cubic metres.
5.

Medium·Calculate[2 marks]

A spring extends by 20 mm20\,\mathrm{mm}20mm when a force of 8.0 N8.0\,\mathrm{N}8.0N is applied. It obeys Hooke’s law. Calculate its spring constant.
Show answer and explanation

Answer: B · Worked explanation

Convert the extension to 0.020 m0.020\,\mathrm{m}0.020m. Then k=FΔL=8.00.020=4.0×102 N m−1k=\frac{F}{\Delta L}=\frac{8.0}{0.020}=4.0\times10^{2}\,\mathrm{N\,m^{-1}}k=ΔLF​=0.0208.0​=4.0×102Nm−1. The value 0.40 comes from dividing by 20 without converting millimetres to metres, so it is really a figure in newtons per millimetre. Always convert extensions to metres before using k=FΔLk=\frac{F}{\Delta L}k=ΔLF​ with the unit N m−1\mathrm{N\,m^{-1}}Nm−1.
6.

Medium·Calculate[2 marks]

A spring obeys Hooke’s law. A force of 6.0 N6.0\,\mathrm{N}6.0N stretches it by 0.040 m0.040\,\mathrm{m}0.040m. Calculate the elastic strain energy stored.
Show answer and explanation

Answer: C · Worked explanation

The stored energy is the area under the straight-line graph, so Ee=12FΔL=12×6.0×0.040=0.12 JE_\mathrm{e}=\frac{1}{2}F\Delta L=\frac{1}{2}\times6.0\times0.040=0.12\,\mathrm{J}Ee​=21​FΔL=21​×6.0×0.040=0.12J. The value 0.24 J0.24\,\mathrm{J}0.24J comes from leaving out the factor of one half. The value 1.5×1021.5\times10^{2}1.5×102 is the spring constant in N m−1\mathrm{N\,m^{-1}}Nm−1, not an energy. The elastic strain energy is the area under the force–extension graph, which is a triangle in this case.
7.

Medium·Determine[2 marks]

A wire is loaded until its extension is 8.0 mm8.0\,\mathrm{mm}8.0mm and then unloaded. The force falls to zero when the extension is 2.0 mm2.0\,\mathrm{mm}2.0mm. Determine what this shows.
Show answer and explanation

Answer: A · Worked explanation

A leftover extension of 2.0 mm2.0\,\mathrm{mm}2.0mm means the change is permanent, which is plastic deformation beyond the elastic limit. Staying within the elastic limit would bring the extension back to zero. Calling the wire brittle is wrong, because a brittle material shows almost no plastic deformation.
8.

Hard·Compare[2 marks]

Two wires are made of the same material. Wire B has twice the cross-sectional area of wire A. Compare their tensile strength and the force needed to break each wire.
Show answer and explanation

Answer: B · Worked explanation

Tensile strength is a force per unit area, so it is a property of the material and is the same for both wires. The breaking force equals tensile strength multiplied by area, so B needs twice the force. Saying that B has twice the tensile strength confuses the strength of the material with the size of the sample.
9.

Hard·Predict[2 marks]

A spring has k=250 N m−1k=250\,\mathrm{N\,m^{-1}}k=250Nm−1 and obeys Hooke’s law up to 5.0 N5.0\,\mathrm{N}5.0N. Beyond this its extension grows faster than the force. Predict the extension when a force of 10 N10\,\mathrm{N}10N is applied.
Show answer and explanation

Answer: B · Worked explanation

Hooke’s law would give 10250=0.040 m\frac{10}{250}=0.040\,\mathrm{m}25010​=0.040m, but it fails beyond 5.0 N5.0\,\mathrm{N}5.0N. Past the limit of proportionality each extra newton gives more extension than before, so the real extension is more than 0.040 m0.040\,\mathrm{m}0.040m. An extension of exactly 0.040 m0.040\,\mathrm{m}0.040m wrongly applies the law outside its range.
10.

Hard·Calculate[2 marks]

An irregular object of mass 0.18 kg0.18\,\mathrm{kg}0.18kg is lowered into a measuring cylinder. The water level rises from 50.0 cm350.0\,\mathrm{cm^{3}}50.0cm3 to 70.0 cm370.0\,\mathrm{cm^{3}}70.0cm3. Calculate its density.
Show answer and explanation

Answer: D · Worked explanation

The volume of the object is the rise in level, 20.0 cm3=2.00×10−5 m320.0\,\mathrm{cm^{3}}=2.00\times10^{-5}\,\mathrm{m^{3}}20.0cm3=2.00×10−5m3. Then ρ=0.182.00×10−5=9.0×103 kg m−3\rho=\frac{0.18}{2.00\times10^{-5}}=9.0\times10^{3}\,\mathrm{kg\,m^{-3}}ρ=2.00×10−50.18​=9.0×103kgm−3. The value 2.6×1032.6\times10^{3}2.6×103 comes from using the final reading of 70.0 cm370.0\,\mathrm{cm^{3}}70.0cm3 as the volume of the object. Using the initial reading of 50.0 cm350.0\,\mathrm{cm^{3}}50.0cm3 gives 3.6×1033.6\times10^{3}3.6×103, which is also wrong, because only the change in level is the volume of the object.

Keep going

Next topic3.4.2.2 The Young modulusPrevious topic3.4.1.8 Conservation of energy

More in Section 3.4 · Mechanics and materials

  1. 3.4.1.2MomentsNotes · 10 questions
  2. 3.4.1.3Motion in a straight lineNotes · 10 questions
  3. 3.4.1.4Projectile motionNotes · 10 questions
  4. 3.4.1.5Newton's laws of motionNotes · 10 questions
  5. 3.4.1.6MomentumNotes · 10 questions
  6. 3.4.1.7Work, energy and powerNotes · 10 questions
  7. 3.4.1.8Conservation of energyNotes · 9 questions
  8. 3.4.2.1Bulk properties of solidsNotes · 10 questions
  9. 3.4.2.2The Young modulusNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1Density compares the mass of a material with its volume
  2. 2Hooke’s law links force and extension for a spring
  3. 3Elastic materials return to their shape when unloaded
  4. 4Brittle and ductile materials break in different ways
  5. 5Force–extension graphs show stiffness and stored energy
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Force–extension graphs for two materials

Force (N)0246802468101214Extension (mm)
  • Brittle
  • Ductile, straight part
  • Ductile, curved part
  • Brittle break
  • Ductile limit
  • Ductile break