Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.4 Mechanics and materials
  4. ›3.4.1.2 Moments

AQA A-level Physics · Section 3.4 · Mechanics and materials

3.4.1.2 Moments

Calculate the moment of a force about a point and use the principle of moments to solve problems about equilibrium.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6A force has a turning effect called its moment
  1. 1A force has a turning effect called its moment
  2. 2Moment equals force multiplied by perpendicular distance
  3. 3Equilibrium needs zero resultant force and zero resultant moment
  4. 4The principle of moments links clockwise and anticlockwise moments
  5. 5Weight acts at the centre of mass of an object
  6. 6A couple turns an object without a resultant force
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: A force has a turning effect called its moment

Push a door close to its hinges and it barely moves. Push at the handle and it swings easily. The force is the same, but the turning effect is not.

The turning effect of a force is its moment. The fixed point an object turns about is the pivot. A moment is sometimes called a torque.

A force also has a line of action. This is the straight line along which the force acts. Its distance from the pivot decides how large the moment is.

Key terms · tap one for its definition

moment

The moment of a force is the force multiplied by the perpendicular distance from the pivot to its line of action, measured in newton metres.

pivot

A pivot is the fixed point about which an object can turn.

line of action

The line of action of a force is the straight line, extended in both directions, along which the force acts.

Part 1 done

2

Part 2 of 6: Moment equals force multiplied by perpendicular distance

Now put numbers on that turning effect. The distance that counts is the perpendicular distance from the pivot to the line of action. Perpendicular means measured at a right angle to that line.

In words, moment equals force multiplied by perpendicular distance. In symbols, moment=Fd\mathrm{moment}=Fdmoment=Fd. Here FFF is the force in newtons and ddd is the distance in metres. The unit is the newton metre, N m\mathrm{N\,m}Nm.

If a force acts at an angle, resolve it. Only the component perpendicular to the line from the pivot turns the object. A force whose line of action passes through the pivot has no moment.

Worked example

Moment of an angled force

A force of 40 N acts on a spanner 0.50 m long. The force makes an angle of 30∘30^{\circ}30∘ with the spanner. Find the moment about the nut.
  1. 1
    Resolve the force perpendicular to the spanner: Fsin⁡30∘=40 N×0.50=20 NF\sin30^{\circ}=40\,\mathrm{N}\times0.50=20\,\mathrm{N}Fsin30∘=40N×0.50=20N.
  2. 2
    Use moment=Fd\mathrm{moment}=Fdmoment=Fd with d=0.50 md=0.50\,\mathrm{m}d=0.50m.
  3. 3
    moment=20 N×0.50 m=10 N m\mathrm{moment}=20\,\mathrm{N}\times0.50\,\mathrm{m}=10\,\mathrm{N\,m}moment=20N×0.50m=10Nm.

Answer: The moment about the nut is 10 N m10\,\mathrm{N\,m}10Nm.

Exam tip

Always say which point you take moments about. Give the unit as N m\mathrm{N\,m}Nm.

Part 2 done

Quick check

One question on the part you just read

Easy

Which is the unit of the moment of a force?
Show answer and explanation

Answer: A · Worked explanation

Moment is force multiplied by distance, so its unit is the newton metre, N m\mathrm{N\,m}Nm. The unit N m−1\mathrm{N\,m^{-1}}Nm−1 would suit a force per unit length. The unit N m−2\mathrm{N\,m^{-2}}Nm−2 would suit a force spread over an area. The unit N s\mathrm{N\,s}Ns comes from force multiplied by time.
3

Part 3 of 6: Equilibrium needs zero resultant force and zero resultant moment

So far one moment acted alone. Real objects usually feel several forces at once, and they may stay perfectly still.

An object is in equilibrium when two conditions hold. First, the resultant force on it is zero. Second, the resultant moment about any point is zero.

Each condition does separate work. A zero resultant force stops the object accelerating. A zero resultant moment stops it starting to turn.

Common mistake

A zero resultant force does not guarantee equilibrium. Two equal and opposite forces with separated lines of action can still turn an object.

Key term

equilibrium

Translational equilibrium occurs when the resultant force on an object is zero; a rigid body is in equilibrium only if the resultant torque is also zero.

Part 3 done

4

Part 4 of 6: The principle of moments links clockwise and anticlockwise moments

The second condition can be written as a simple rule. A moment tends to turn an object clockwise or anticlockwise. The principle of moments says that in equilibrium, the total clockwise moment equals the total anticlockwise moment, about any point.

For two forces, either side of a pivot, this gives F1d1=F2d2F_1d_1=F_2d_2F1​d1​=F2​d2​.

Figure 1. Each force has a moment equal to the force multiplied by its perpendicular distance from the pivot.

You may take moments about any point. Choose the point where an unknown force acts. That force then has zero moment and drops out of the equation. This makes many problems much shorter.

Worked example

Balancing a seesaw

A child weighing 300 N sits 1.5 m from the pivot of a seesaw. The other child sits 3.0 m from the pivot, on the opposite side. The seesaw balances. Find the weight of the second child.
  1. 1
    Balanced, so clockwise moment equals anticlockwise moment.
  2. 2
    300 N×1.5 m=W×3.0 m300\,\mathrm{N}\times1.5\,\mathrm{m}=W\times3.0\,\mathrm{m}300N×1.5m=W×3.0m.
  3. 3
    450 N m=W×3.0 m450\,\mathrm{N\,m}=W\times3.0\,\mathrm{m}450Nm=W×3.0m, so W=450 N m3.0 m=150 NW=\frac{450\,\mathrm{N\,m}}{3.0\,\mathrm{m}}=150\,\mathrm{N}W=3.0m450Nm​=150N.

Answer: The second child weighs 150 N150\,\mathrm{N}150N.

Key term

principle of moments

The principle of moments states that, in equilibrium, the sum of clockwise moments about any point equals the sum of anticlockwise moments about it.

Part 4 done

Quick check

One question on the part you just read

Easy

State the rule that applies to the moments on an object in rotational balance.
Show answer and explanation

Answer: A · Worked explanation

The principle of moments says that the total clockwise moment equals the total anticlockwise moment about any point. Balancing forces alone is not enough, because a moment depends on distance as well as force. Equal distances alone are not enough either, since forces on the two sides may differ.
5

Part 5 of 6: Weight acts at the centre of mass of an object

The seesaw example treated each weight as a single force. Every part of a real object has weight. We replace all of these by one force acting at the centre of mass.

A uniform beam has the same material and thickness throughout. Its centre of mass is at its midpoint. Balance a uniform metre rule at the 50 cm mark and its own weight has no moment about the pivot. If the beam is not uniform, its centre of mass lies closer to the heavier end.

Worked example

A plank on two supports

A uniform plank 3.0 m long weighs 60 N. It rests on supports AAA and BBB at its ends. A 90 N load sits 1.0 m from AAA. Find the support forces.
  1. 1
    Take moments about AAA, so the unknown force at AAA drops out.
  2. 2
    B×3.0 m=60 N×1.5 m+90 N×1.0 m=180 N mB\times3.0\,\mathrm{m}=60\,\mathrm{N}\times1.5\,\mathrm{m}+90\,\mathrm{N}\times1.0\,\mathrm{m}=180\,\mathrm{N\,m}B×3.0m=60N×1.5m+90N×1.0m=180Nm.
  3. 3
    B=180 N m3.0 m=60 NB=\frac{180\,\mathrm{N\,m}}{3.0\,\mathrm{m}}=60\,\mathrm{N}B=3.0m180Nm​=60N.
  4. 4
    The upward forces balance the downward forces: A+B=60 N+90 NA+B=60\,\mathrm{N}+90\,\mathrm{N}A+B=60N+90N, so A=90 NA=90\,\mathrm{N}A=90N.

Answer: The support forces are A=90 NA=90\,\mathrm{N}A=90N and B=60 NB=60\,\mathrm{N}B=60N.

Key term

centre of mass

The centre of mass of an object is the point where its whole weight can be considered to act.

Part 5 done

6

Part 6 of 6: A couple turns an object without a resultant force

Two equal forces can sometimes turn an object without pushing it sideways. A couple is a pair of equal and opposite parallel forces whose lines of action do not coincide. Turning a tap or a steering wheel with two hands is an example.

The resultant force is zero, but there is still a moment. The moment of a couple equals one force multiplied by the perpendicular distance between the two lines of action. So moment of a couple=Fd\mathrm{moment\,of\,a\,couple}=Fdmomentofacouple=Fd.

Take a wheel 0.30 m across. Two hands push with 15 N each, on opposite sides, in opposite directions. The moment is 15 N×0.30 m=4.5 N m15\,\mathrm{N}\times0.30\,\mathrm{m}=4.5\,\mathrm{N\,m}15N×0.30m=4.5Nm.

Key term

couple

A couple is a pair of equal and opposite parallel forces whose lines of action are separated, producing a turning effect with no resultant force.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what is meant by the moment of a force about a point.

    Show mark schemeHide mark scheme

    Model answer

    The moment is the force multiplied by the perpendicular distance from the point to the line of action of the force.

    • 1 mark for stating that moment is force multiplied by distance
    • 1 mark for stating that the distance is perpendicular, from the point to the line of action of the force
  2. 2.Calculate[3 marks]

    A force of 50 N pushes on a door 0.80 m from the hinge. The force makes an angle of 40∘40^{\circ}40∘ with the door. Calculate the moment of the force about the hinge.

    Show mark schemeHide mark scheme

    Model answer

    The perpendicular component is 50sin⁡40∘=32 N50\sin40^{\circ}=32\,\mathrm{N}50sin40∘=32N. The moment is 32 N×0.80 m=26 N m32\,\mathrm{N}\times0.80\,\mathrm{m}=26\,\mathrm{N\,m}32N×0.80m=26Nm.

    • 1 mark for resolving the force perpendicular to the door using sin⁡40∘\sin40^{\circ}sin40∘
    • 1 mark for multiplying by the distance of 0.80 m
    • 1 mark for obtaining 26 N m26\,\mathrm{N\,m}26Nm
  3. 3.Calculate[3 marks]

    A child weighing 400 N sits 1.2 m from the pivot of a seesaw. Calculate the distance from the pivot at which a 600 N child must sit to balance it.

    Show mark schemeHide mark scheme

    Model answer

    Clockwise moment equals anticlockwise moment, so 400 N×1.2 m=600 N×d400\,\mathrm{N}\times1.2\,\mathrm{m}=600\,\mathrm{N}\times d400N×1.2m=600N×d. Then d=480 N m600 N=0.80 md=\frac{480\,\mathrm{N\,m}}{600\,\mathrm{N}}=0.80\,\mathrm{m}d=600N480Nm​=0.80m.

    • 1 mark for applying the principle of moments
    • 1 mark for substituting the forces and distances correctly
    • 1 mark for obtaining 0.80 m
  4. 4.State[2 marks]

    State the two conditions needed for an object to be in equilibrium.

    Show mark schemeHide mark scheme

    Model answer

    The resultant force on the object is zero. The resultant moment about any point is zero.

    • 1 mark for stating that the resultant force is zero
    • 1 mark for stating that the resultant moment about any point is zero
  5. 5.Explain[3 marks]

    Explain why a couple can make an object turn although the resultant force on it is zero.

    Show mark schemeHide mark scheme

    Model answer

    The two forces are equal and opposite, so the resultant force is zero. Their lines of action are separated by a perpendicular distance. Each force has a moment about the same point in the same sense, so there is a turning effect.

    • 1 mark for stating that the forces are equal and opposite so the resultant force is zero
    • 1 mark for stating that the lines of action are separated by a perpendicular distance
    • 1 mark for explaining that the moments act in the same sense, giving a turning effect
  6. 6.Calculate[2 marks]

    Two forces of 12 N, acting in opposite directions, form a couple. Their lines of action are 0.25 m apart. Calculate the moment of the couple.

    Show mark schemeHide mark scheme

    Model answer

    moment=Fd=12 N×0.25 m=3.0 N m\mathrm{moment}=Fd=12\,\mathrm{N}\times0.25\,\mathrm{m}=3.0\,\mathrm{N\,m}moment=Fd=12N×0.25m=3.0Nm.

    • 1 mark for using one force multiplied by the distance between the lines of action
    • 1 mark for obtaining 3.0 N m3.0\,\mathrm{N\,m}3.0Nm

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Calculate[1 mark]

Calculate the moment of a 20 N force acting at a perpendicular distance of 0.50 m from a pivot.
Show answer and explanation

Answer: A · Worked explanation

Moment equals Fd=20 N×0.50 m=10 N mFd=20\,\mathrm{N}\times0.50\,\mathrm{m}=10\,\mathrm{N\,m}Fd=20N×0.50m=10Nm. The value 40 N m40\,\mathrm{N\,m}40Nm comes from dividing the force by the distance instead of multiplying. The value 0.025 N m0.025\,\mathrm{N\,m}0.025Nm comes from dividing the distance by the force. Both divide when the quantities should be multiplied. Check that the result has the unit of force times distance.
4.

Medium·Calculate[2 marks]

A 60 N force acts on a spanner 0.25 m long. The force makes an angle of 30∘30^{\circ}30∘ with the spanner. Calculate the moment about the nut.
Show answer and explanation

Answer: A · Worked explanation

Only the component perpendicular to the spanner turns the nut: 60sin⁡30∘=30 N60\sin30^{\circ}=30\,\mathrm{N}60sin30∘=30N. The moment is 30 N×0.25 m=7.5 N m30\,\mathrm{N}\times0.25\,\mathrm{m}=7.5\,\mathrm{N\,m}30N×0.25m=7.5Nm. The value 13 N m13\,\mathrm{N\,m}13Nm uses cosine instead of sine. The value 15 N m15\,\mathrm{N\,m}15Nm ignores the angle and uses the whole force. The value 30 N m30\,\mathrm{N\,m}30Nm is the perpendicular force alone, with no distance.
5.

Medium·Calculate[2 marks]

A seesaw balances. A 250 N child sits 1.6 m from the pivot. The other child sits 2.0 m from the pivot on the opposite side. Calculate the weight of the second child.
Show answer and explanation

Answer: A · Worked explanation

The moments are equal, so 250 N×1.6 m=W×2.0 m250\,\mathrm{N}\times1.6\,\mathrm{m}=W\times2.0\,\mathrm{m}250N×1.6m=W×2.0m. This gives W=4002.0=200 NW=\frac{400}{2.0}=200\,\mathrm{N}W=2.0400​=200N. The value 313 N comes from swapping the two distances. The value 400 N is the moment itself, quoted as a force because the final division by the distance was left out.
6.

Medium·Calculate[2 marks]

A uniform metre rule is pivoted at its 50 cm mark. A 2.0 N weight hangs from the 20 cm mark. At which mark must a 3.0 N weight hang to balance the rule?
Show answer and explanation

Answer: A · Worked explanation

The 2.0 N weight is 30 cm from the pivot, so its moment is 60 N cm60\,\mathrm{N\,cm}60Ncm. The 3.0 N weight needs a distance of 603.0=20 cm\frac{60}{3.0}=20\,\mathrm{cm}3.060​=20cm, which is the 70 cm mark. The rule’s own weight acts at the pivot and has no moment. The 80 cm mark would balance two equal weights.
7.

Medium·Calculate[2 marks]

Two forces of 8.0 N act in opposite directions on opposite sides of a wheel. The lines of action are 0.30 m apart. Calculate the moment of this couple.
Show answer and explanation

Answer: A · Worked explanation

The moment of a couple is one force multiplied by the distance between the lines of action: 8.0 N×0.30 m=2.4 N m8.0\,\mathrm{N}\times0.30\,\mathrm{m}=2.4\,\mathrm{N\,m}8.0N×0.30m=2.4Nm. The value 0 N m0\,\mathrm{N\,m}0Nm wrongly links the zero resultant force to zero turning effect. The value 4.8 N m4.8\,\mathrm{N\,m}4.8Nm wrongly adds the two forces before multiplying.
8.

Hard·Calculate[2 marks]

A uniform plank 4.0 m long weighs 100 N. It rests on supports at its two ends. A 60 N load sits 1.0 m from the left end. Calculate the force from the left support.
Show answer and explanation

Answer: A · Worked explanation

Take moments about the right end: L×4.0=100×2.0+60×3.0=380L\times4.0=100\times2.0+60\times3.0=380L×4.0=100×2.0+60×3.0=380. So L=95 NL=95\,\mathrm{N}L=95N. The value 65 N is the force at the right support. The value 80 N assumes the supports share the 160 N load equally, which cannot be true because the load is off centre.
9.

Hard·Calculate[2 marks]

A 100 N force acts along a line that passes through a pivot. It is applied at a point 0.50 m from the pivot. Calculate the moment of the force about the pivot.
Show answer and explanation

Answer: A · Worked explanation

The line of action passes through the pivot, so the perpendicular distance from the pivot to that line is zero. The moment is zero. The value 50 N m50\,\mathrm{N\,m}50Nm wrongly uses the distance along the line from the pivot to the point of application. The value 200 N m200\,\mathrm{N\,m}200Nm comes from dividing the force by that distance.
10.

Hard·Calculate[2 marks]

A uniform beam of length 2.0 m and weight 40 N is hinged at one end. A vertical cable attached 1.5 m from the hinge holds the beam horizontal. Calculate the tension in the cable.
Show answer and explanation

Answer: A · Worked explanation

Take moments about the hinge. The weight acts at the midpoint, 1.0 m away, so T×1.5=40×1.0T\times1.5=40\times1.0T×1.5=40×1.0. This gives T=27 NT=27\,\mathrm{N}T=27N. The value 53 N wrongly places the weight at the far end, 2.0 m from the hinge. The value 20 N wrongly puts the cable at 2.0 m. The value 40 N wrongly assumes the tension equals the weight.

Keep going

Next topic3.4.1.3 Motion in a straight linePrevious topic3.4.1.1 Scalars and vectors

More in Section 3.4 · Mechanics and materials

  1. 3.4.1.1Scalars and vectorsNotes · 10 questions
  2. 3.4.1.2MomentsNotes · 10 questions
  3. 3.4.1.3Motion in a straight lineNotes · 10 questions
  4. 3.4.1.4Projectile motionNotes · 10 questions
  5. 3.4.1.5Newton's laws of motionNotes · 10 questions
  6. 3.4.1.6MomentumNotes · 10 questions
  7. 3.4.1.7Work, energy and powerNotes · 10 questions
  8. 3.4.1.8Conservation of energyNotes · 9 questions
  9. 3.4.2.1Bulk properties of solidsNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1A force has a turning effect called its moment
  2. 2Moment equals force multiplied by perpendicular distance
  3. 3Equilibrium needs zero resultant force and zero resultant moment
  4. 4The principle of moments links clockwise and anticlockwise moments
  5. 5Weight acts at the centre of mass of an object
  6. 6A couple turns an object without a resultant force
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe