AQA A-level Physics · Section 3.4 · Mechanics and materials
3.4.1.8 Conservation of energy
State the principle of conservation of energy, describe mechanical energy transfers, calculate changes in kinetic and potential energy and identify energy losses.
1/5Energy is transferred between stores, never destroyed
- Energy is transferred between stores, never destroyed
- A falling object swaps potential energy for kinetic energy
- Energy transfers occur in many mechanical systems
- Friction and air resistance transfer energy to the surroundings
- A fixed method turns energy ideas into answers
- Check your recall
- Practice: 9 questions
Part 1 of 5: Energy is transferred between stores, never destroyed
A ball dropped from your hand speeds up as it falls. Its gravitational potential energy falls while its kinetic energy rises. The energy has moved from one store to another.
The principle of conservation of energy says that energy is never created or destroyed. It is only transferred. The total stays constant provided the system exchanges no energy with its surroundings.
Key terms · tap one for its definition
gravitational potential energy
Gravitational potential energy is the energy an object stores because of its position in a gravitational field.
kinetic energy
Kinetic energy is the energy an object has due to its motion, equal to and measured in joules.
conservation of energy
Conservation of energy means the total energy of a closed system remains constant despite transfers between stores.
Part 2 of 5: A falling object swaps potential energy for kinetic energy
Take the dropped ball and follow the numbers. Ignore air resistance for now. Then the ball’s loss in gravitational potential energy equals its gain in kinetic energy.
The loss in potential energy is , where is the height fallen. The gain in kinetic energy is for a ball dropped from rest. So , and the mass cancels.
This gives . The speed after falling a given height does not depend on mass. Here is the gravitational field strength, .
Worked example
Speed of a falling ball
- Loss in = gain in , so .
- Rearrange: .
- Substitute: .
Answer: .

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: B · Worked explanation
Part 3 of 5: Energy transfers occur in many mechanical systems
Falling is only one case. Many everyday systems follow the same pattern of swapping potential and kinetic energy.
- A ball thrown upwards transfers kinetic energy to gravitational potential energy as it rises.
- A roller-coaster car transfers gravitational potential energy to kinetic energy as it descends.
- A pendulum bob swings with kinetic energy greatest at the lowest point and potential energy greatest at the ends.
A pendulum bob moves along a circular arc. The tension in the string acts at right angles to the movement, so it does no work. Only the Earth’s pull transfers energy.
Worked example
Pendulum at its lowest point
- Loss in = gain in , so .
- Rearrange: .
- Substitute: .
Answer: .
Part 4 of 5: Friction and air resistance transfer energy to the surroundings
Real falling objects do not reach the speed given by the last equation. Air resistance acts against them. A sliding box also stops, even though no one pushes it backwards.
A non-conservative force, such as friction or air resistance, transfers mechanical energy into thermal energy. The energy spreads into the surroundings, so it cannot be fully recovered as useful motion.
The total energy has not changed. Include the thermal energy and the total is again constant. The mechanical energy alone has decreased.
Key term
non-conservative force
A non-conservative force is a force, such as friction, that transfers mechanical energy into thermal energy so it cannot be fully recovered.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 5 of 5: A fixed method turns energy ideas into answers
Now that losses are included, a fixed method handles any case. It works for slopes, swings and falls, with or without friction.
- Identify the start and end positions.
- Find the potential and kinetic energy at each.
- Compare the totals to find the energy transferred to thermal energy.
- Check that the answer is not negative.
Worked example
A car on a slope
- Loss in .
- Gain in .
- Thermal energy = loss in minus gain in .
- Substitute: .
Answer: About is transferred to thermal energy.
Friction and air resistance together account for this energy. Most of it ends up as thermal energy in the car, the road and the air.
Check your recall[15 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.State[2 marks]
State the principle of conservation of energy.
Show mark schemeHide mark scheme
Model answer
Energy cannot be created or destroyed, only transferred between stores. The total energy of a closed system remains constant.
- 1 mark for stating that energy is not created or destroyed, only transferred
- 1 mark for stating that the total energy of a closed system is constant
- 2.Describe[2 marks]
Describe the energy transfers as a pendulum bob swings from the end of its swing to its lowest point.
Show mark schemeHide mark scheme
Model answer
Gravitational potential energy decreases and kinetic energy increases. Potential energy is transferred to kinetic energy, and kinetic energy is greatest at the lowest point.
- 1 mark for stating that gravitational potential energy decreases
- 1 mark for stating that kinetic energy increases, so energy is transferred from potential to kinetic
- 3.Calculate[3 marks]
A ball is dropped from rest from . Ignore air resistance. Calculate its speed just before it hits the ground.
Show mark schemeHide mark scheme
Model answer
, so .
- 1 mark for equating the loss in to the gain in
- 1 mark for rearranging to with correct substitution
- 1 mark for giving
- 4.Explain[3 marks]
Explain why a box that slides to a stop does not break the principle of conservation of energy.
Show mark schemeHide mark scheme
Model answer
Friction acts on the box. Friction transfers the box’s kinetic energy to thermal energy in the box and the surface. The total energy is the same, so the principle is not broken.
- 1 mark for identifying friction as a non-conservative force acting on the box
- 1 mark for stating that kinetic energy is transferred to thermal energy in the surroundings
- 1 mark for stating that total energy is still constant
- 5.Calculate[3 marks]
A block slides down a slope, falling a height of , and reaches a speed of at the bottom. Calculate the energy transferred to thermal energy.
Show mark schemeHide mark scheme
Model answer
Loss in . Gain in . Thermal energy .
- 1 mark for finding the loss in as
- 1 mark for finding the gain in as
- 1 mark for subtracting to give about
- 6.Suggest[2 marks]
Suggest why the real speed of a falling ball is lower than the value from .
Show mark schemeHide mark scheme
Model answer
Air resistance acts against the ball. It transfers some of the ball’s energy to thermal energy, so less potential energy becomes kinetic energy.
- 1 mark for stating that air resistance acts against the motion
- 1 mark for stating that some energy is transferred to thermal energy, so the kinetic energy gained is smaller

Practice this topic
9 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 9 answered
Includes the 2 quick checks in the note above.
EasyCalculate[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: D · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: B · Worked explanation
MediumIdentify[1 mark]
Show answer and explanation
Answer: C · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: C · Worked explanation
HardCalculate[2 marks]
Show answer and explanation
Answer: B · Worked explanation
HardIdentify[1 mark]
Show answer and explanation
Answer: D · Worked explanation