Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›6 Thermochemistry
  4. ›6.1 Endothermic and exothermic processes

AP Chemistry · Unit 6 · Thermochemistry

6.1 Endothermic and exothermic processes

Identify endothermic and exothermic processes, describe temperature changes, and explain heat flow between a system and its surroundings.

  • 2 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4The system and surroundings define where heat flows
  1. 1The system and surroundings define where heat flows
  2. 2Endothermic processes take heat into the system
  3. 3Exothermic processes send heat into the surroundings
  4. 4Temperature observations need a clear measurement location
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: The system and surroundings define where heat flows

The system is the part being studied, such as the reacting chemicals. The surroundings are everything outside that boundary. In an experiment, the container, nearby solution, and air may be part of the surroundings. State the boundary before describing heat flow. Heat entering the system comes from the surroundings. Heat leaving the system goes to the surroundings.

Exam tip

Name both the system and surroundings when describing heat flow. This makes the direction unambiguous.

Key terms · tap one for its definition

system

The system is the part of an experiment chosen for study.

surroundings

The surroundings are everything outside the chosen system.

Part 1 done

2

Part 2 of 4: Endothermic processes take heat into the system

An endothermic process absorbs heat from its surroundings. Heat flows from the surroundings into the system. Melting ice is an example: the ice takes in heat from nearby matter. If an endothermic reaction draws heat from the solution around it, that solution may cool. The temperature change depends on the experiment. A heater could replace the heat being absorbed and keep the surroundings at a steady temperature.

Common mistake

Endothermic does not mean the system must become colder. It describes heat flow into the system, not a required temperature change.

Key term

endothermic process

An endothermic process takes in heat from its surroundings.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the process that is endothermic.
Show answer and explanation

Answer: C · Worked explanation

Melting ice takes in heat from its surroundings, so the process is endothermic. Burning fuel, cooling metal that warms water, and condensation all transfer heat out of the system and are exothermic.
3

Part 3 of 4: Exothermic processes send heat into the surroundings

An exothermic process releases heat to its surroundings. Heat flows from the system into the surroundings. Combustion is an example: the reacting chemicals release heat to nearby matter. If that heat warms the surrounding solution, its temperature rises. The rise may be small if heat also escapes into the wider environment. An exothermic process can even occur while the system’s temperature stays steady.

Figure 1. The arrow reverses when the direction of heat flow reverses.

Key term

exothermic process

An exothermic process releases heat to its surroundings.

Part 3 done

4

Part 4 of 4: Temperature observations need a clear measurement location

A thermometer measures the temperature where its tip sits. During a reaction, it may measure the reacting mixture or a surrounding solution. Those are not always the same part of the setup. If a surrounding solution cools while supplying heat to a reaction, the reaction is endothermic. If the solution warms because the reaction releases heat, the reaction is exothermic. These patterns are most useful when other heat sources and losses are limited.

Exam tip

When using temperature evidence, identify what the thermometer measures. Then state the direction of heat flow.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[2 marks]

    Identify the system and surroundings when the reacting chemicals are chosen for study.

    Show mark schemeHide mark scheme

    Model answer

    The reacting chemicals are the system. Everything outside that chosen boundary is the surroundings.

    • 1 mark for identifying the reacting chemicals as the system
    • 1 mark for identifying everything outside the chosen boundary as the surroundings
  2. 2.Explain[3 marks]

    Explain why a reaction is endothermic when it absorbs heat from a surrounding solution.

    Show mark schemeHide mark scheme

    Model answer

    The reaction is the system. Heat flows from the surrounding solution into the system. Absorbing heat from the surroundings makes the reaction endothermic.

    • 1 mark for identifying the reaction as the system
    • 1 mark for stating that heat flows from the surrounding solution into the system
    • 1 mark for linking heat absorption by the system to an endothermic process
  3. 3.Explain[3 marks]

    Explain what happens to a surrounding solution when an exothermic reaction releases heat into it.

    Show mark schemeHide mark scheme

    Model answer

    Heat flows from the reaction system into the surrounding solution. The solution usually warms, so its temperature rises.

    • 1 mark for stating that heat leaves the reaction system
    • 1 mark for stating that heat enters the surrounding solution
    • 1 mark for predicting a temperature rise in that solution
  4. 4.Interpret[3 marks]

    Interpret a drop in a surrounding solution’s temperature during a reaction, assuming little other heat transfer.

    Show mark schemeHide mark scheme

    Model answer

    The surrounding solution loses heat to the reaction system. The reaction absorbs that heat, so it is endothermic.

    • 1 mark for identifying the solution as the surroundings
    • 1 mark for stating that heat flows from the solution into the reaction system
    • 1 mark for classifying the reaction as endothermic
  5. 5.Explain[2 marks]

    Explain why an endothermic process need not make the system colder.

    Show mark schemeHide mark scheme

    Model answer

    Endothermic describes heat entering the system. It does not require the system’s temperature to fall.

    • 1 mark for stating that endothermic describes heat entering the system
    • 1 mark for stating that the system’s temperature does not necessarily decrease

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A chemical process transfers heat from the reacting system to the surrounding container. Identify the process type.
Show answer and explanation

Answer: A · Worked explanation

A process is exothermic when heat leaves the system and enters the surroundings. The container receiving heat is consistent with this direction. Calling it endothermic because the system loses energy confuses heat leaving the system with heat entering it.
3.

Easy·State[1 mark]

A reaction releases heat into a nearby solution, and little heat escapes elsewhere. State the likely temperature change of the solution.
Show answer and explanation

Answer: C · Worked explanation

The solution receives heat from the reaction, so its temperature will likely rise when other heat transfers are small. The temperature of the reaction mixture does not have to change in the same way; the thermometer’s location matters.
4.

Easy·Identify[1 mark]

In an experiment, the reacting chemicals are defined as the system. Identify the direction of heat flow when the reaction absorbs heat.
Show answer and explanation

Answer: B · Worked explanation

When the reaction absorbs heat, heat crosses the boundary from the surroundings into the system. Heat flowing out of the system would instead describe heat release. A thermometer can measure temperature but does not define the direction of heat transfer.
5.

Medium·Determine[1 mark]

During a process, a heater supplies energy that keeps the system at a steady temperature while heat is absorbed. Determine how the process should be classified.
Show answer and explanation

Answer: A · Worked explanation

The classification depends on heat flow, not whether the system’s temperature changes. Since heat is supplied to and absorbed by the system, the process is endothermic. A steady temperature can result when a heater replaces the heat being absorbed.
6.

Medium·Deduce[1 mark]

A student measures the temperature of the solution surrounding a reaction. It falls from 24.0 °C24.0\,\text{°C}24.0°C to 19.5 °C19.5\,\text{°C}19.5°C, with negligible heat transfer to the wider environment. Deduce the reaction type.
Show answer and explanation

Answer: C · Worked explanation

The surrounding solution cools as it loses heat, and the stated negligible losses mean that heat is transferred into the reaction system. A reaction that takes in heat from its surroundings is endothermic. The tempting claim that the solution’s heat goes to the wider surroundings contradicts the condition that such transfer is negligible.
7.

Medium·Explain[2 marks]

A reaction is the system, and a surrounding liquid is observed to warm during the process. Assuming the liquid is warmed by the reaction, explain the direction of heat flow.
Show answer and explanation

Answer: C · Worked explanation

The liquid is part of the surroundings, and its warming indicates that it receives heat from the reaction system. Thus heat flows outward across the system boundary. The liquid being outside the system does not prevent heat transfer; it is precisely part of the surroundings that can receive heat.
8.

Medium·Compare[2 marks]

Two separate reactions occur in insulated cups. The solution around Reaction P cools, while the solution around Reaction Q warms. Which comparison is best supported, assuming the temperature changes result from the reactions?
Show answer and explanation

Answer: D · Worked explanation

The solution around P cools as it supplies heat to the reaction, indicating an endothermic process. The solution around Q warms as it receives heat from the reaction, indicating an exothermic process. A temperature change alone does not make both processes the same type; its direction and measurement location matter.
9.

Hard·Deduce[2 marks]

A reaction occurs in a vessel whose wall is held at a constant temperature by a temperature-control bath. The bath supplies heat to the vessel throughout the reaction, while the reacting chemicals are the system. Deduce the heat-flow direction and process type.
Show answer and explanation

Answer: B · Worked explanation

The bath supplies heat across the boundary toward the reacting chemicals, so heat enters the system and the reaction is endothermic. A constant wall temperature does not mean heat transfer is absent; the bath can replace heat as it is absorbed. Being outside the system does not make the bath’s heat input exothermic.
10.

Hard·Deduce[2 marks]

In an insulated setup, a thermometer embedded in the reaction mixture records no temperature change, while a separate surrounding solution cools. The reaction is defined as the system. Deduce the best conclusion from these observations.
Show answer and explanation

Answer: B · Worked explanation

The surrounding solution cools in the insulated setup, indicating that it loses heat to the reaction system; heat entering the system makes the reaction endothermic. The mixture can remain at a steady temperature despite absorbing heat, so the tempting inference from its thermometer reading alone is not justified.

Keep going

Next topic6.2 Energy diagramsPrevious topic5.11 Catalysis

More in Unit 6 · Thermochemistry

  1. 6.1Endothermic and exothermic processesNotes · 10 questions
  2. 6.2Energy diagramsNotes · 10 questions
  3. 6.3Heat transfer and thermal equilibriumNotes · 10 questions
  4. 6.4Heat capacity and calorimetryNotes · 10 questions
  5. 6.5Energy of phase changesNotes · 10 questions
  6. 6.6Introduction to enthalpy of reactionNotes · 10 questions
  7. 6.7Bond enthalpiesNotes · 10 questions
  8. 6.8Enthalpy of formationNotes · 10 questions
  9. 6.9Hess's lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1The system and surroundings define where heat flows
  2. 2Endothermic processes take heat into the system
  3. 3Exothermic processes send heat into the surroundings
  4. 4Temperature observations need a clear measurement location
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe