Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Environmental Science
  3. ›6 Energy Resources and Consumption
  4. ›6.13 Energy conservation

AP Environmental Science · Unit 6 · Energy Resources and Consumption

6.13 Energy conservation

Define energy conservation as saving energy, explain why it matters, and describe ways to reduce energy use at home and in industry.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Conserving energy means using less energy to get the same benefit
  1. 1Conserving energy means using less energy to get the same benefit
  2. 2Saving energy protects resources, air quality and money
  3. 3Homes can save energy through insulation, appliances and habits
  4. 4Industry and transportation save energy by recovering and reusing it
  5. 5Costs, savings and policy decide which strategies people adopt
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Conserving energy means using less energy to get the same benefit

Switching off a light in an empty room saves energy. So does wearing a sweater instead of turning up the heat. Conserving energy means reducing the amount of energy used, by using less or by wasting less.

Wasting less is the job of energy efficiency. An efficient device turns more of its input into useful work and less into waste heat. In symbols, efficiency is useful outputtotal input×100%\frac{\mathrm{useful\ output}}{\mathrm{total\ input}}\times100\%total inputuseful output​×100%.

Common mistake

The physical law of conservation of energy says energy is never created or destroyed. Saving energy here means something different: using less of a resource.

Key terms · tap one for its definition

conserving energy

Conserving energy means reducing the amount of energy used, either by using less or by wasting less.

energy efficiency

Energy efficiency is the percentage of a device’s total energy input that is converted into useful output.

Part 1 done

2

Part 2 of 5: Saving energy protects resources, air quality and money

The value of saving energy becomes clear when you trace energy back to its source. Much of the world’s energy comes from burning fossil fuels such as coal, oil and natural gas. Every unit saved means less fuel burned.

  • Less burning releases fewer air pollutants and less carbon dioxide.
  • Nonrenewable fuels last longer when demand falls.
  • Households and businesses pay lower energy bills.
  • Fewer new power plants, mines and pipelines disturb habitat.
  • Countries depend less on imported fuel.

Saved energy never has to be produced. It needs no fuel, no power plant and no transmission line.

Part 2 done

Quick check

One question on the part you just read

Easy

Which action best illustrates conserving energy?
Show answer and explanation

Answer: A · Worked explanation

Conserving energy means reducing the amount of energy used. Switching off lights in an empty room does exactly that. Leaving appliances on standby keeps them drawing standby power, so it wastes energy. Heating unused rooms and removing insulation both increase the energy needed, so neither conserves it.
3

Part 3 of 5: Homes can save energy through insulation, appliances and habits

Households are a practical place to start, because many savings need only small changes. Much home energy goes to heating, cooling and hot water. Insulation slows heat flow through walls, roofs and floors, so heating and cooling systems run less.

  • Seal air leaks around doors and windows.
  • Choose efficient appliances and LED lighting.
  • Set a programmable thermostat to match daily routines.
  • Turn off lights and unplug idle chargers.

Many devices draw standby power while plugged in but not in use. Each device draws little, but the total adds up over a year.

Household electricity is billed by the kilowatt-hour (kWh). Energy in kilowatt-hours equals power in kilowatts multiplied by time in hours.

Worked example

Energy saved by an LED bulb

A 60 W incandescent bulb is replaced by a 10 W LED that gives similar light. The lamp runs 5 hours a day for 30 days. Calculate the energy saved.
  1. 1
    Energy = power × time.
  2. 2
    Power saved = 60 W−10 W=50 W60\,\mathrm{W}-10\,\mathrm{W}=50\,\mathrm{W}60W−10W=50W.
  3. 3
    Energy saved = 50 W×5 h/day×30 days=7,500 Wh50\,\mathrm{W}\times5\,\mathrm{h/day}\times30\,\mathrm{days}=7{,}500\,\mathrm{Wh}50W×5h/day×30days=7,500Wh.
  4. 4
    Convert to kilowatt-hours: 7,500 Wh1,000 Wh/kWh=7.5 kWh\frac{7{,}500\,\mathrm{Wh}}{1{,}000\,\mathrm{Wh/kWh}}=7.5\,\mathrm{kWh}1,000Wh/kWh7,500Wh​=7.5kWh.

Answer: The LED saves 7.5 kWh in 30 days.

Key terms · tap one for its definition

insulation

Insulation is material that slows the transfer of heat through walls, roofs and floors.

standby power

Standby power is the electricity a device draws while switched off or idle but still plugged in.

kilowatt-hour

A kilowatt-hour (kWh) is the energy used by a 1 kilowatt device running for 1 hour, equal to 3.6 million joules.

Part 3 done

4

Part 4 of 5: Industry and transportation save energy by recovering and reusing it

Factories and vehicles use large amounts of energy, so improvements there can save a great deal. Cogeneration captures heat that a power process would otherwise waste and uses it for heating or manufacturing. Factories can also upgrade motors and tune processes to avoid overuse.

Recycling often takes less energy than making materials from raw ore, as with aluminum. In transportation, efficient vehicles, public transit and carpooling move people using less fuel.

Examples of strategies that reduce energy use

StrategyWhere usedHow it saves energy
InsulationHomesSlows heat loss, so less heating is needed
CogenerationIndustryUses heat that would be wasted
Recycling aluminumIndustryAvoids energy-intensive processing of ore
Public transitCitiesMoves more people per unit of fuel
LED lightingHomes and industryGives light using less electricity
Strategy
Insulation
Where used
Homes
How it saves energy
Slows heat loss, so less heating is needed
Strategy
Cogeneration
Where used
Industry
How it saves energy
Uses heat that would be wasted
Strategy
Recycling aluminum
Where used
Industry
How it saves energy
Avoids energy-intensive processing of ore
Strategy
Public transit
Where used
Cities
How it saves energy
Moves more people per unit of fuel
Strategy
LED lighting
Where used
Homes and industry
How it saves energy
Gives light using less electricity

Exam tip

Name a strategy and state how it cuts energy use, such as ‘cogeneration uses heat that would be wasted’. A name alone earns less credit.

Key term

cogeneration

Cogeneration is the production of electricity and useful heat from a single fuel source.

Part 4 done

Quick check

One question on the part you just read

Easy

What is the main purpose of insulation in a home?
Show answer and explanation

Answer: A · Worked explanation

Insulation slows the transfer of heat through walls, roofs and floors. The building keeps its warmth in winter and its coolness in summer, so heating and cooling systems run less. Insulation does not produce heat or store electricity, and it does not add fresh air.
5

Part 5 of 5: Costs, savings and policy decide which strategies people adopt

Many efficient options cost more at purchase than ordinary ones. People compare that extra cost with the savings that follow.

The payback period is the time needed for energy savings to equal the extra upfront cost: payback period=extra costannual savings\mathrm{payback\ period}=\frac{\mathrm{extra\ cost}}{\mathrm{annual\ savings}}payback period=annual savingsextra cost​. A shorter payback makes a strategy more attractive. If the payback is shorter than the device’s life, the purchase saves money overall.

An energy audit finds where a building wastes energy and which fixes pay off fastest. Governments also help through building codes, efficiency standards and rebates.

Key terms · tap one for its definition

payback period

The payback period is the time for accumulated energy savings to equal the extra upfront cost of an efficient option.

energy audit

An energy audit is an assessment of how a building or facility uses energy and where use can be reduced.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe what is meant by conserving energy and give one example in a home.

    Show mark schemeHide mark scheme

    Model answer

    Conserving energy means reducing the amount of energy used, by using less or wasting less. An example is switching off lights in empty rooms or adding insulation.

    • 1 mark for stating that it means reducing the amount of energy used
    • 1 mark for giving a valid home example such as switching off lights, insulating or using LED bulbs
  2. 2.Explain[2 marks]

    Explain why conserving energy can reduce air pollution.

    Show mark schemeHide mark scheme

    Model answer

    Much energy comes from burning fossil fuels. Using less energy means less fuel is burned, so fewer pollutants and less carbon dioxide are released.

    • 1 mark for linking energy use to the burning of fossil fuels
    • 1 mark for stating that less burning releases fewer pollutants or less carbon dioxide
  3. 3.Calculate[3 marks]

    A 100 W device is replaced by a 25 W device that does the same task. Each runs 4 hours a day. Calculate the energy saved over 10 days, in kWh.

    Show mark schemeHide mark scheme

    Model answer

    Power saved = 100−25=75 W100-25=75\,\mathrm{W}100−25=75W. Energy saved = 75 W×4 h/day×10 days=3,000 Wh=3.0 kWh75\,\mathrm{W}\times4\,\mathrm{h/day}\times10\,\mathrm{days}=3{,}000\,\mathrm{Wh}=3.0\,\mathrm{kWh}75W×4h/day×10days=3,000Wh=3.0kWh.

    • 1 mark for finding the power difference of 75 W
    • 1 mark for multiplying by 4 h/day and 10 days to get 3,000 Wh
    • 1 mark for converting to 3.0 kWh
  4. 4.Identify[2 marks]

    Identify two ways a factory can reduce its energy use.

    Show mark schemeHide mark scheme

    Model answer

    A factory can use cogeneration to make use of waste heat. It can also upgrade motors, tune its processes or recycle materials.

    • 1 mark for identifying one valid industrial strategy
    • 1 mark for identifying a second valid industrial strategy
  5. 5.Justify[3 marks]

    Justify whether a household should buy an appliance that costs 500 dollars more than a standard one but saves 100 dollars a year and lasts 8 years.

    Show mark schemeHide mark scheme

    Model answer

    Payback period = 500 / 100 = 5 years, which is shorter than the 8-year life. Total savings are 800 dollars, so the net saving is 300 dollars. The household should buy it.

    • 1 mark for calculating a payback period of 5 years
    • 1 mark for comparing the payback period with the 8-year life
    • 1 mark for concluding that it is worthwhile, with a net saving of 300 dollars

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the unit commonly used to bill household electrical energy.
Show answer and explanation

Answer: A · Worked explanation

A kilowatt-hour is an amount of energy: the use of a 1 kilowatt device for 1 hour. A kilowatt and a watt are units of power, which is a rate of energy use, not an amount of energy. A volt measures electrical potential difference and is not used to bill energy.
4.

Medium·Calculate[2 marks]

A 75 W device runs 4 hours a day. Calculate the energy it uses in 20 days, in kWh.
Show answer and explanation

Answer: A · Worked explanation

Energy = 75 W×4 h/day×20 days=6,000 Wh75\,\mathrm{W}\times4\,\mathrm{h/day}\times20\,\mathrm{days}=6{,}000\,\mathrm{Wh}75W×4h/day×20days=6,000Wh. Dividing by 1,000 Wh/kWh gives 6.0 kWh, which has two significant figures like the data. The value 0.30 kWh is the energy used in only one day. The value 6,000 comes from forgetting to convert watt-hours to kilowatt-hours.
5.

Medium[1 mark]

Which description of cogeneration is correct?
Show answer and explanation

Answer: A · Worked explanation

Cogeneration produces electricity and useful heat from a single fuel source. Heat that would normally be wasted is put to use, so less extra fuel is needed for heating. It does not double electricity output, store electricity or replace fuels with recycled materials.
6.

Medium·Calculate[2 marks]

Efficient windows cost 600 dollars more than ordinary windows and save 150 dollars per year. Calculate the payback period.
Show answer and explanation

Answer: A · Worked explanation

Payback period = extra costannual savings=600150=4\frac{\mathrm{extra\ cost}}{\mathrm{annual\ savings}}=\frac{600}{150}=4annual savingsextra cost​=150600​=4 years. The value 0.25 years comes from dividing the savings by the cost, which inverts the ratio. The value 450 comes from subtracting the savings from the cost, which has no meaning here.
7.

Medium[1 mark]

Which industrial strategy reduces total energy use?
Show answer and explanation

Answer: A · Worked explanation

Recycling aluminum generally takes much less energy than producing it from raw ore, so it cuts total energy use. Running motors at full speed wastes energy when full speed is not needed. Venting waste heat throws away energy that cogeneration could use, and older equipment usually wastes more of its input.
8.

Hard·Calculate[2 marks]

Machine A converts 60% of its input energy into useful work, and machine B converts 80%. Each must deliver 2,400 kJ of useful work. Calculate how much input energy machine B saves compared with machine A.
Show answer and explanation

Answer: A · Worked explanation

Machine A needs 2,4000.60=4,000 kJ\frac{2{,}400}{0.60}=4{,}000\,\mathrm{kJ}0.602,400​=4,000kJ of input. Machine B needs 2,4000.80=3,000 kJ\frac{2{,}400}{0.80}=3{,}000\,\mathrm{kJ}0.802,400​=3,000kJ. The saving is 4,000 − 3,000 = 1,000 kJ, because the more efficient machine wastes less. The value 480 kJ is 20% of the useful work, but the efficiency difference applies to the input energy, not the useful output.
9.

Hard[1 mark]

Which statement correctly separates saving energy from the physical law of conservation of energy?
Show answer and explanation

Answer: A · Worked explanation

Saving energy is about reducing how much energy people use, for example by using efficient devices. The physical law states that total energy is never created or destroyed, even when it spreads out as waste heat. The two ideas answer different questions, so neither one can replace the other.
10.

Hard·Determine[2 marks]

Appliance X costs 400 dollars, saves 80 dollars a year and lasts 10 years. Appliance Y costs 300 dollars, saves 30 dollars a year and lasts 15 years. Net saving is total savings minus purchase price. Determine the better choice.
Show answer and explanation

Answer: A · Worked explanation

For X, payback is 400 / 80 = 5 years and the net saving is 800 − 400 = 400 dollars. For Y, payback is 10 years and the net saving is 450 − 300 = 150 dollars. X is better on both measures. The value 800 dollars ignores the purchase price, and 450 dollars is Y’s total savings, not its net saving.

Keep going

Next topic7.1 Introduction to air pollutionPrevious topic6.12 Wind energy

More in Unit 6 · Energy Resources and Consumption

  1. 6.5Fossil fuelsNotes · 10 questions
  2. 6.6Nuclear powerNotes · 10 questions
  3. 6.7Energy from biomassNotes · 10 questions
  4. 6.8Solar energyNotes · 10 questions
  5. 6.9Hydroelectric powerNotes · 10 questions
  6. 6.10Geothermal energyNotes · 10 questions
  7. 6.11Hydrogen fuel cellsNotes · 10 questions
  8. 6.12Wind energyNotes · 10 questions
  9. 6.13Energy conservationNotes · 10 questions

All AP Environmental Science topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Conserving energy means using less energy to get the same benefit
  2. 2Saving energy protects resources, air quality and money
  3. 3Homes can save energy through insulation, appliances and habits
  4. 4Industry and transportation save energy by recovering and reusing it
  5. 5Costs, savings and policy decide which strategies people adopt
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe