Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 2
  3. ›11 Electric Circuits
  4. ›11.1 Electric current

AP Physics 2 · Unit 11 · Electric Circuits

11.1 Electric current

Define electric current as the rate of flow of charge, identify the direction of conventional current, and calculate current from charge and time.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Electric current is the rate at which charge flows
  1. 1Electric current is the rate at which charge flows
  2. 2Dividing charge by time gives the average current
  3. 3Conventional current points the way positive charge would move
  4. 4Different materials carry current with different moving charges
  5. 5Current is the same at every point along a single path
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Electric current is the rate at which charge flows

Imagine counting the water that passes one spot in a river each second. Electric current works the same way, but you count charge instead.

The electric current in a wire is the amount of charge passing a point each second. If charge ΔQ\Delta QΔQ passes in a time Δt\Delta tΔt, then I=ΔQΔtI=\frac{\Delta Q}{\Delta t}I=ΔtΔQ​. A larger flow of charge in the same time means a larger current.

Current is measured in ampere units, abbreviated A\mathrm{A}A. One ampere means one coulomb of charge passing each second, so 1 A=1 C/s1\,\mathrm{A}=1\,\mathrm{C/s}1A=1C/s. A wire carrying a large current moves a large amount of charge past each point every second.

Key terms · tap one for its definition

electric current

The electric current III in a conductor is the charge ΔQ\Delta QΔQ passing a point per unit time, I=ΔQ/ΔtI=\Delta Q/\Delta tI=ΔQ/Δt, measured in amperes.

ampere

The ampere is the SI unit of electric current, where 1 A=1 C/s1\,\mathrm{A}=1\,\mathrm{C/s}1A=1C/s.

Part 1 done

2

Part 2 of 5: Dividing charge by time gives the average current

Now put numbers into the definition. Because I=ΔQΔtI=\frac{\Delta Q}{\Delta t}I=ΔtΔQ​ is a rate, the time must be in seconds. If the current is steady, the same relation gives the charge: ΔQ=IΔt\Delta Q=I\Delta tΔQ=IΔt.

Worked example

Current through a bulb

A flashlight bulb passes 45 C45\,\mathrm{C}45C of charge in 1.5 minutes. Calculate the average current.
  1. 1
    Convert the time to seconds: Δt=1.5×60 s=90 s\Delta t=1.5\times60\,\mathrm{s}=90\,\mathrm{s}Δt=1.5×60s=90s.
  2. 2
    Current equals charge divided by time: I=ΔQΔtI=\frac{\Delta Q}{\Delta t}I=ΔtΔQ​.
  3. 3
    Substitute: I=45 C90 s=0.50 C/sI=\frac{45\,\mathrm{C}}{90\,\mathrm{s}}=0.50\,\mathrm{C/s}I=90s45C​=0.50C/s.

Answer: The average current is 0.50 A0.50\,\mathrm{A}0.50A.

The relation also works in reverse. A steady current of 0.50 A0.50\,\mathrm{A}0.50A lasting 10 s10\,\mathrm{s}10s moves 5.0 C5.0\,\mathrm{C}5.0C.

A single electron carries a charge of magnitude e=1.60×10−19 Ce=1.60\times10^{-19}\,\mathrm{C}e=1.60×10−19C. So the number of electrons passing a point equals the total charge divided by eee.

Exam tip

Convert minutes or hours to seconds before dividing. A current in amperes needs a time in seconds.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the SI unit of electric current.
Show answer and explanation

Answer: B · Worked explanation

Current is charge per unit time, and its unit is the ampere, where 1 A=1 C/s1\,\mathrm{A}=1\,\mathrm{C/s}1A=1C/s. The coulomb is the unit of charge itself, not of a rate. The volt measures potential difference, and the joule measures energy. Remember that one ampere equals one coulomb per second.
3

Part 3 of 5: Conventional current points the way positive charge would move

So far we have not said which way the charge moves. That needs a convention.

By convention, current direction is the direction positive charge would flow. This is conventional current. Outside a battery, it runs from the positive terminal around the circuit to the negative terminal.

Early scientists chose this convention before they knew what carries charge in metals. It still works. Positive charge moving one way has the same circuit effect as negative charge moving the other way.

Common mistake

In a metal wire, conventional current points opposite to the motion of the electrons. The electrons drift toward the positive terminal.

Key term

conventional current

Conventional current is the direction in which positive charge would move, from the positive terminal to the negative terminal outside a battery.

Part 3 done

4

Part 4 of 5: Different materials carry current with different moving charges

What actually moves depends on the material. The atoms in a metal stay in place. Only the free electrons travel through the wire.

Each electron is a charge carrier, a charged particle free to move and carry current. In salt water, both positive and negative ions move.

Both kinds contribute to the same conventional current. Negative carriers moving left count the same as positive carriers moving right.

Charge carriers and conventional current

CarrierSignMotion compared with conventional current
Electrons in a metalnegativeopposite direction
Positive ions in solutionpositivesame direction
Negative ions in solutionnegativeopposite direction
Carrier
Electrons in a metal
Sign
negative
Motion compared with conventional current
opposite direction
Carrier
Positive ions in solution
Sign
positive
Motion compared with conventional current
same direction
Carrier
Negative ions in solution
Sign
negative
Motion compared with conventional current
opposite direction
Figure 1. Electrons drift to the left, while conventional current is drawn to the right. The two directions are always opposite in a metal.

Whichever carriers move, the current is the total charge crossing a point each second.

Key term

charge carrier

A charge carrier is a charged particle, such as an electron or an ion, that is free to move and so carry electric current.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the correct description of conventional current outside a battery.
Show answer and explanation

Answer: C · Worked explanation

Conventional current is the direction positive charge would flow, which is from the positive terminal toward the negative terminal outside the battery. Electrons actually move the opposite way, so describing conventional current as the electron direction reverses the convention. Any statement about conventional current should mention positive charge.
5

Part 5 of 5: Current is the same at every point along a single path

Next, follow the current around one loop. Charge does not pile up or vanish inside a wire. With no branches, the same amount of charge passes every point each second.

An ammeter measures this current. It is connected so that the current passes through it. A good ammeter has very little effect on the current it measures.

Common mistake

A bulb does not use up current. The same current leaves the bulb as enters it. The bulb transfers energy from the moving charge.

Key term

ammeter

An ammeter is an instrument that measures electric current when the current passes through it.

Note read

Check your recall[13 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe what is meant by electric current and give its unit.

    Show mark schemeHide mark scheme

    Model answer

    Electric current is the rate at which charge passes a point in a conductor, I=ΔQΔtI=\frac{\Delta Q}{\Delta t}I=ΔtΔQ​. Its unit is the ampere, equal to one coulomb per second.

    • 1 mark for stating that current is the rate at which charge passes a point
    • 1 mark for giving the unit as the ampere, equal to 1 C/s1\,\mathrm{C/s}1C/s
  2. 2.Calculate[3 marks]

    Calculate the average current when 72 C72\,\mathrm{C}72C of charge passes through a lamp in 3.0 minutes.

    Show mark schemeHide mark scheme

    Model answer

    Δt=3.0×60 s=180 s\Delta t=3.0\times60\,\mathrm{s}=180\,\mathrm{s}Δt=3.0×60s=180s. Then I=ΔQΔt=72 C180 s=0.40 AI=\frac{\Delta Q}{\Delta t}=\frac{72\,\mathrm{C}}{180\,\mathrm{s}}=0.40\,\mathrm{A}I=ΔtΔQ​=180s72C​=0.40A.

    • 1 mark for converting 3.0 minutes to 180 s
    • 1 mark for using I=ΔQ/ΔtI=\Delta Q/\Delta tI=ΔQ/Δt with correct substitution
    • 1 mark for obtaining 0.40 A0.40\,\mathrm{A}0.40A
  3. 3.Identify[1 mark]

    Identify the direction of conventional current outside a battery, in terms of its terminals.

    Show mark schemeHide mark scheme

    Model answer

    Conventional current runs from the positive terminal to the negative terminal.

    • 1 mark for stating from the positive terminal toward the negative terminal
  4. 4.Explain[2 marks]

    Explain why conventional current in a metal wire points opposite to the motion of the electrons.

    Show mark schemeHide mark scheme

    Model answer

    Conventional current is defined as the direction positive charge would move. Electrons carry negative charge, so they move opposite to that direction.

    • 1 mark for stating that conventional current is the direction positive charge would flow
    • 1 mark for stating that electrons are negative, so they move the opposite way
  5. 5.Determine[3 marks]

    Determine the number of electrons that pass a point in 2.0 s2.0\,\mathrm{s}2.0s when the current is 0.80 A0.80\,\mathrm{A}0.80A. Use e=1.60×10−19 Ce=1.60\times10^{-19}\,\mathrm{C}e=1.60×10−19C.

    Show mark schemeHide mark scheme

    Model answer

    ΔQ=IΔt=(0.80 A)(2.0 s)=1.6 C\Delta Q=I\Delta t=(0.80\,\mathrm{A})(2.0\,\mathrm{s})=1.6\,\mathrm{C}ΔQ=IΔt=(0.80A)(2.0s)=1.6C. The number of electrons is 1.6 C1.60×10−19 C=1.0×1019\frac{1.6\,\mathrm{C}}{1.60\times10^{-19}\,\mathrm{C}}=1.0\times10^{19}1.60×10−19C1.6C​=1.0×1019.

    • 1 mark for finding the charge ΔQ=IΔt=1.6 C\Delta Q=I\Delta t=1.6\,\mathrm{C}ΔQ=IΔt=1.6C
    • 1 mark for dividing the charge by the charge of one electron
    • 1 mark for obtaining 1.0×10191.0\times10^{19}1.0×1019 electrons
  6. 6.Predict[2 marks]

    Predict the reading of a second ammeter placed further along a single wire with no branches, when the first reads 0.30 A. Give a reason.

    Show mark schemeHide mark scheme

    Model answer

    The second ammeter also reads 0.30 A. Charge does not pile up or vanish, so the same charge passes every point each second.

    • 1 mark for predicting 0.30 A0.30\,\mathrm{A}0.30A
    • 1 mark for giving the reason that charge does not pile up or vanish in a single path

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the expression for the average current when charge ΔQ\Delta QΔQ passes a point in time Δt\Delta tΔt.
Show answer and explanation

Answer: C · Worked explanation

Current is a rate, so it is charge divided by time. Its units confirm this: coulombs divided by seconds gives amperes. Inverting the ratio gives seconds per coulomb, which is not a unit of current. Multiplying or subtracting the quantities would not give a rate, because a rate always divides by time.
4.

Medium·Calculate[2 marks]

Calculate the average current when 36 C36\,\mathrm{C}36C of charge passes a point in 12 s12\,\mathrm{s}12s.
Show answer and explanation

Answer: D · Worked explanation

I=ΔQΔt=36 C12 s=3.0 AI=\frac{\Delta Q}{\Delta t}=\frac{36\,\mathrm{C}}{12\,\mathrm{s}}=3.0\,\mathrm{A}I=ΔtΔQ​=12s36C​=3.0A. The value of 0.33 A0.33\,\mathrm{A}0.33A comes from dividing time by charge instead of charge by time. The value of 432 A432\,\mathrm{A}432A multiplies the two quantities. Check the units: coulombs divided by seconds gives amperes. The value of 24 A24\,\mathrm{A}24A subtracts the quantities, which has no physical meaning for a rate.
5.

Medium·Determine[2 marks]

A steady current of 0.25 A0.25\,\mathrm{A}0.25A flows for 2.0 minutes. Determine the total charge that passes.
Show answer and explanation

Answer: A · Worked explanation

Convert the time first: 2.0 min=120 s2.0\,\mathrm{min}=120\,\mathrm{s}2.0min=120s. Then ΔQ=IΔt=(0.25 A)(120 s)=30 C\Delta Q=I\Delta t=(0.25\,\mathrm{A})(120\,\mathrm{s})=30\,\mathrm{C}ΔQ=IΔt=(0.25A)(120s)=30C. The value of 0.50 C0.50\,\mathrm{C}0.50C multiplies by 2.0 without converting minutes to seconds. The value of 480 C480\,\mathrm{C}480C divides the time by the current, which inverts the relation. Current is defined per second, so the time must be in seconds.
6.

Medium·Determine[2 marks]

A steady current of 0.40 A0.40\,\mathrm{A}0.40A flows for 2.0 s2.0\,\mathrm{s}2.0s. Determine how many electrons pass a point, given e=1.60×10−19 Ce=1.60\times10^{-19}\,\mathrm{C}e=1.60×10−19C.
Show answer and explanation

Answer: C · Worked explanation

The charge is ΔQ=IΔt=0.80 C\Delta Q=I\Delta t=0.80\,\mathrm{C}ΔQ=IΔt=0.80C. The number of electrons is 0.80 C1.60×10−19 C=5.0×1018\frac{0.80\,\mathrm{C}}{1.60\times10^{-19}\,\mathrm{C}}=5.0\times10^{18}1.60×10−19C0.80C​=5.0×1018. The value of 2.5×10182.5\times10^{18}2.5×1018 divides the current by eee and forgets to include the time. Dividing by eee converts coulombs into a count of electrons, since each electron carries 1.60×10−19 C1.60\times10^{-19}\,\mathrm{C}1.60×10−19C.
7.

Medium·Predict[2 marks]

In a single loop with no branches, an ammeter before a bulb reads 0.60 A0.60\,\mathrm{A}0.60A. Predict the reading of an ammeter placed just after the bulb.
Show answer and explanation

Answer: B · Worked explanation

Charge does not pile up or vanish, so the same charge passes every point in the loop each second. The second ammeter also reads 0.60 A0.60\,\mathrm{A}0.60A. A reading of 0.30 A0.30\,\mathrm{A}0.30A wrongly assumes the bulb uses up half of the current. The bulb transfers energy, but it does not change how much charge passes.
8.

Hard·Determine[2 marks]

In a salt solution, positive ions carrying a total of 6.0 C6.0\,\mathrm{C}6.0C move right through a cross-section in 2.0 s2.0\,\mathrm{s}2.0s. In the same time, negative ions carrying a total of 4.0 C4.0\,\mathrm{C}4.0C move left through it. Determine the current.
Show answer and explanation

Answer: A · Worked explanation

Negative ions moving left count as conventional current to the right, so both kinds add. I=6.0 C+4.0 C2.0 s=5.0 AI=\frac{6.0\,\mathrm{C}+4.0\,\mathrm{C}}{2.0\,\mathrm{s}}=5.0\,\mathrm{A}I=2.0s6.0C+4.0C​=5.0A to the right. The value of 1.0 A1.0\,\mathrm{A}1.0A subtracts the two flows, which treats them as opposing. The value of 3.0 A3.0\,\mathrm{A}3.0A counts only the positive ions, and 5.0 A5.0\,\mathrm{A}5.0A to the left reverses the direction of conventional current.
9.

Hard·Determine[2 marks]

A meter records the total charge that has passed a point as 0 C0\,\mathrm{C}0C at t=0t=0t=0, 8.0 C8.0\,\mathrm{C}8.0C at t=4.0 st=4.0\,\mathrm{s}t=4.0s, and 20.0 C20.0\,\mathrm{C}20.0C at t=8.0 st=8.0\,\mathrm{s}t=8.0s. Determine the average current between t=4.0 st=4.0\,\mathrm{s}t=4.0s and t=8.0 st=8.0\,\mathrm{s}t=8.0s.
Show answer and explanation

Answer: D · Worked explanation

Between the two times, the extra charge is 20.0 C−8.0 C=12.0 C20.0\,\mathrm{C}-8.0\,\mathrm{C}=12.0\,\mathrm{C}20.0C−8.0C=12.0C in 4.0 s4.0\,\mathrm{s}4.0s, so I=3.0 AI=3.0\,\mathrm{A}I=3.0A. The value of 2.5 A2.5\,\mathrm{A}2.5A uses the whole record from t=0t=0t=0, which gives the average over the full 8.0 s8.0\,\mathrm{s}8.0s instead. Average current uses only the charge passed in the chosen interval divided by that interval’s duration. The value of 5.0 A5.0\,\mathrm{A}5.0A divides the final reading by only 4.0 s4.0\,\mathrm{s}4.0s.
10.

Hard·Calculate[2 marks]

A steady current transfers 5.4×103 C5.4\times10^{3}\,\mathrm{C}5.4×103C of charge in 1.0 hour. Calculate the current.
Show answer and explanation

Answer: C · Worked explanation

Convert the time: 1.0 h=3600 s1.0\,\mathrm{h}=3600\,\mathrm{s}1.0h=3600s. Then I=5.4×103 C3600 s=1.5 AI=\frac{5.4\times10^{3}\,\mathrm{C}}{3600\,\mathrm{s}}=1.5\,\mathrm{A}I=3600s5.4×103C​=1.5A. The value of 5.4×103 A5.4\times10^{3}\,\mathrm{A}5.4×103A divides by 1.0 without converting hours to seconds, and 90 A90\,\mathrm{A}90A treats an hour as 60 seconds. Current is a rate, so the time must be in seconds before dividing. The value of 0.67 A0.67\,\mathrm{A}0.67A inverts the ratio.

Keep going

Next topic11.2 Simple circuitsPrevious topic10.7 Conservation of electric energy

More in Unit 11 · Electric Circuits

  1. 11.1Electric currentNotes · 10 questions
  2. 11.2Simple circuitsNotes · 10 questions
  3. 11.3Resistance, resistivity and Ohm's lawNotes · 10 questions
  4. 11.4Electric powerNotes · 10 questions
  5. 11.5Compound DC circuitsNotes · 10 questions
  6. 11.6Kirchhoff's loop ruleNotes · 10 questions
  7. 11.7Kirchhoff's junction ruleNotes · 10 questions
  8. 11.8RC circuitsNotes · 10 questions

All AP Physics 2 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Electric current is the rate at which charge flows
  2. 2Dividing charge by time gives the average current
  3. 3Conventional current points the way positive charge would move
  4. 4Different materials carry current with different moving charges
  5. 5Current is the same at every point along a single path
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe