Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 2
  3. ›11 Electric Circuits
  4. ›11.8 RC circuits

AP Physics 2 · Unit 11 · Electric Circuits

11.8 RC circuits

Describe how a capacitor charges and discharges through a resistor, sketch the graphs, and calculate the time constant.

  • 3 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A capacitor charges gradually through a resistor
  1. 1A capacitor charges gradually through a resistor
  2. 2Charging current starts large and falls toward zero
  3. 3The time constant sets how fast charging happens
  4. 4Discharging drives the same quantities back down
  5. 5Voltage and current graphs share one exponential shape
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A capacitor charges gradually through a resistor

Think of filling a bucket through a narrow pipe. Water rushes in at first, then slows as the bucket fills. A capacitor charged through a resistor behaves in a similar way.

A capacitor stores charge on two plates. Its capacitance tells how much charge it holds for each volt across it, so C=QΔVC=\frac{Q}{\Delta V}C=ΔVQ​. A resistor and a capacitor in series with a battery form an RC circuit.

The resistor limits how fast charge can move. That is why the capacitor needs time to charge instead of filling instantly.

Exam tip

Italic CCC means capacitance. An upright C\mathrm{C}C inside a unit means coulomb, as in μC\mathrm{\mu C}μC.

Key terms · tap one for its definition

capacitance

The capacitance CCC of a capacitor is the charge stored per unit potential difference, C=QΔVC=\frac{Q}{\Delta V}C=ΔVQ​, measured in farads (F\mathrm{F}F).

RC circuit

An RC circuit is a circuit that contains a resistor and a capacitor in series, so charge moves onto or off the capacitor gradually.

Part 1 done

2

Part 2 of 5: Charging current starts large and falls toward zero

Now follow the circuit after the switch closes. At that instant the capacitor holds no charge, so the potential difference across it is zero. The battery’s whole potential difference, ε\varepsilonε, appears across the resistor. The current is then at its maximum, I0=εRI_0=\frac{\varepsilon}{R}I0​=Rε​.

As charge builds up, the capacitor’s potential difference rises. Kirchhoff’s loop rule requires ε=IR+QC\varepsilon=IR+\frac{Q}{C}ε=IR+CQ​ at every moment. So the resistor’s share shrinks and the current falls.

After a long time, the capacitor’s potential difference equals ε\varepsilonε. The resistor then has none, so the current stops.

Charging through a resistor

QuantityJust after closingAfter a long time
Capacitor potential differencezeroε\varepsilonε
Resistor potential differenceε\varepsilonεzero
CurrentεR\frac{\varepsilon}{R}Rε​zero
Charge on capacitorzeroCεC\varepsilonCε
Quantity
Capacitor potential difference
Just after closing
zero
After a long time
ε\varepsilonε
Quantity
Resistor potential difference
Just after closing
ε\varepsilonε
After a long time
zero
Quantity
Current
Just after closing
εR\frac{\varepsilon}{R}Rε​
After a long time
zero
Quantity
Charge on capacitor
Just after closing
zero
After a long time
CεC\varepsilonCε

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the expression for the time constant of an RC circuit.
Show answer and explanation

Answer: B · Worked explanation

The time constant is the product of resistance and capacitance, τ=RC\tau=RCτ=RC. Its unit works out as ohm times farad, which is the second. Writing RC\frac{R}{C}CR​ or CR\frac{C}{R}RC​ fails because the unit would not be a time, and 1RC\frac{1}{RC}RC1​ would make larger resistance charge faster, the reverse of reality.
3

Part 3 of 5: The time constant sets how fast charging happens

A large resistor limits the flow, so charging is slower. A large capacitor needs more charge to fill, so charging is slower again. Their product is the time constant, τ=RC\tau=RCτ=RC.

Its unit is the second, because 1 Ω×1 F=1 s1\,\Omega\times1\,\mathrm{F}=1\,\mathrm{s}1Ω×1F=1s. After one time constant, a charging capacitor has about 63% of its final charge. A discharging one has fallen to about 37% of its starting charge. After five time constants, either process is within 1% of finished.

Worked example

Calculate a time constant

A 2.0 kΩ2.0\,\mathrm{k\Omega}2.0kΩ resistor is in series with a 50 μF50\,\mathrm{\mu F}50μF capacitor. Calculate the time constant.
  1. 1
    Write the word equation: time constant = resistance × capacitance.
  2. 2
    Write the symbol equation: τ=RC\tau=RCτ=RC.
  3. 3
    Substitute: τ=(2.0×103 Ω)(50×10−6 F)\tau=(2.0\times10^{3}\,\Omega)(50\times10^{-6}\,\mathrm{F})τ=(2.0×103Ω)(50×10−6F).
  4. 4
    Multiply: 2.0×103×50×10−6=0.102.0\times10^{3}\times50\times10^{-6}=0.102.0×103×50×10−6=0.10.

Answer: The time constant is τ=0.10 s\tau=0.10\,\mathrm{s}τ=0.10s.

Common mistake

The time constant is not the total charging time. The charge keeps approaching its final value for much longer.

Key term

time constant

The time constant τ=RC\tau=RCτ=RC, in seconds, is the time for a charging capacitor to reach about 63% of its final charge.

Part 3 done

4

Part 4 of 5: Discharging drives the same quantities back down

Suppose the capacitor is full and the battery is replaced by a wire. The capacitor now acts as the source. It pushes charge through the resistor until little is left.

The capacitor’s potential difference and charge fall together, quickly at first and then more slowly. The current has the same shape, since it equals the resistor’s potential difference divided by RRR. It flows in the opposite direction to the charging current.

Figure 1. The capacitor’s potential difference rises toward the battery value when charging and falls toward zero when discharging.

Both curves use the same time constant. Only the starting value and the direction of the current differ.

Part 4 done

Quick check

One question on the part you just read

Easy

A battery is connected to an uncharged capacitor through a resistor. What is the current just after the switch closes?
Show answer and explanation

Answer: B · Worked explanation

With no charge on the capacitor, its potential difference is zero. The whole battery potential difference is across the resistor, so I=εRI=\frac{\varepsilon}{R}I=Rε​, the largest current in the process. The idea that the capacitor blocks flow fails because charge must flow onto the plates to charge it; the current falls afterward, not rises.
5

Part 5 of 5: Voltage and current graphs share one exponential shape

Now you can sketch each graph. Every curve is steepest at t=0t=0t=0 and flattens afterward. Each one approaches its final value without ever reaching it.

  • Charging, capacitor potential difference: starts at zero and rises toward ε\varepsilonε.
  • Charging, current: starts at εR\frac{\varepsilon}{R}Rε​ and falls toward zero.
  • Discharging, capacitor potential difference: starts at its initial value and falls toward zero.
  • Discharging, current magnitude: starts at the initial potential difference divided by RRR and falls toward zero.

Exam tip

On a sketch, label both axes with units. Mark the starting value, the final value, and show the curve flattening without touching its final value.

Go deeperThe equations behind the curves

For charging, Q(t)=Cε(1−e−t/τ)Q(t)=C\varepsilon\left(1-e^{-t/\tau}\right)Q(t)=Cε(1−e−t/τ) and I(t)=εRe−t/τI(t)=\frac{\varepsilon}{R}e^{-t/\tau}I(t)=Rε​e−t/τ. The capacitor’s potential difference is QC\frac{Q}{C}CQ​, so it follows the same rise as the charge.

For discharging from an initial charge Q0Q_0Q0​, Q(t)=Q0e−t/τQ(t)=Q_0e^{-t/\tau}Q(t)=Q0​e−t/τ. The current magnitude falls by the same factor. At t=τt=\taut=τ, the factor is e−1≈0.37e^{-1}\approx0.37e−1≈0.37.

Note read

Check your recall[12 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe how the current and the capacitor’s potential difference change while an uncharged capacitor charges through a resistor.

    Show mark schemeHide mark scheme

    Model answer

    The current starts at its maximum value, εR\frac{\varepsilon}{R}Rε​, and falls toward zero. The capacitor’s potential difference rises from zero toward ε\varepsilonε, quickly at first and then more slowly.

    • 1 mark for stating that the current starts at its maximum value ε/R\varepsilon/Rε/R
    • 1 mark for stating that the current falls toward zero as charge builds up
    • 1 mark for stating that the capacitor’s potential difference rises from zero toward ε\varepsilonε, quickly at first and then more slowly
  2. 2.Calculate[2 marks]

    Calculate the time constant for a 3.0 kΩ3.0\,\mathrm{k\Omega}3.0kΩ resistor in series with a 40 μF40\,\mathrm{\mu F}40μF capacitor.

    Show mark schemeHide mark scheme

    Model answer

    τ=RC=(3.0×103 Ω)(40×10−6 F)=0.12 s\tau=RC=(3.0\times10^{3}\,\Omega)(40\times10^{-6}\,\mathrm{F})=0.12\,\mathrm{s}τ=RC=(3.0×103Ω)(40×10−6F)=0.12s.

    • 1 mark for substituting R=3.0×103 ΩR=3.0\times10^{3}\,\OmegaR=3.0×103Ω and C=40×10−6 FC=40\times10^{-6}\,\mathrm{F}C=40×10−6F into τ=RC\tau=RCτ=RC
    • 1 mark for giving the answer 0.12 s0.12\,\mathrm{s}0.12s
  3. 3.Explain[2 marks]

    Explain why doubling the resistance makes a capacitor charge more slowly.

    Show mark schemeHide mark scheme

    Model answer

    A larger resistance reduces the current for a given potential difference. Charge therefore builds up more slowly, and the time constant doubles.

    • 1 mark for stating that a larger resistance gives a smaller current
    • 1 mark for linking the smaller current to slower buildup of charge, or a larger time constant
  4. 4.Justify[2 marks]

    Justify the statement that the current in a charging RC circuit is zero after a long time.

    Show mark schemeHide mark scheme

    Model answer

    After a long time, the capacitor’s potential difference equals ε\varepsilonε. The resistor then has no potential difference across it, so the current is 0R=0\frac{0}{R}=0R0​=0.

    • 1 mark for stating that the capacitor’s potential difference equals ε\varepsilonε
    • 1 mark for concluding that the resistor has zero potential difference, so the current is zero
  5. 5.Identify[1 mark]

    Identify the unit of the time constant.

    Show mark schemeHide mark scheme

    Model answer

    The unit is the second.

    • 1 mark for identifying the second
  6. 6.Predict[2 marks]

    Predict how the time constant changes when the capacitance of a discharging RC circuit is halved and the resistance is unchanged.

    Show mark schemeHide mark scheme

    Model answer

    The time constant is also halved, because τ=RC\tau=RCτ=RC. The capacitor therefore discharges faster.

    • 1 mark for predicting that τ\tauτ is halved
    • 1 mark for justifying this using τ=RC\tau=RCτ=RC with RRR constant

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the quantity that equals 1 Ω×1 F1\,\Omega\times1\,\mathrm{F}1Ω×1F.
Show answer and explanation

Answer: C · Worked explanation

Resistance times capacitance gives a time, so the product is 1 second. This is why RCRCRC is a suitable quantity to describe how long charging takes. A coulomb would be charge, a volt a potential difference, and an ampere a current, none of which come from multiplying these two units.
4.

Medium·Calculate[1 mark]

Calculate the time constant of a circuit with a 5.0 kΩ5.0\,\mathrm{k\Omega}5.0kΩ resistor and a 20 μF20\,\mathrm{\mu F}20μF capacitor.
Show answer and explanation

Answer: D · Worked explanation

τ=RC=(5.0×103 Ω)(20×10−6 F)=0.10 s\tau=RC=(5.0\times10^{3}\,\Omega)(20\times10^{-6}\,\mathrm{F})=0.10\,\mathrm{s}τ=RC=(5.0×103Ω)(20×10−6F)=0.10s. The value 100 s100\,\mathrm{s}100s comes from multiplying 5.0×205.0\times205.0×20 while ignoring both the kilo and the micro prefixes. The values 4.0×10−3 s4.0\times10^{-3}\,\mathrm{s}4.0×10−3s and 1.0×10−3 s1.0\times10^{-3}\,\mathrm{s}1.0×10−3s come from slips in the powers of ten, so convert each prefix before multiplying. Check the unit too: ohms times farads gives seconds, and a tenth of a second is a reasonable result for these values.
5.

Medium·Determine[2 marks]

A 9.0 V9.0\,\mathrm{V}9.0V battery charges an initially uncharged capacitor through a resistor. Determine the capacitor’s potential difference after one time constant.
Show answer and explanation

Answer: C · Worked explanation

After one time constant a charging capacitor reaches about 63% of its final value: 0.63×9.0 V≈5.7 V0.63\times9.0\,\mathrm{V}\approx5.7\,\mathrm{V}0.63×9.0V≈5.7V. The value 4.5 V4.5\,\mathrm{V}4.5V wrongly assumes half the final value. The value 3.3 V3.3\,\mathrm{V}3.3V is 37% of 9.0 V9.0\,\mathrm{V}9.0V, which applies to a discharging capacitor, not a charging one.
6.

Medium·Predict[2 marks]

A capacitor holds 100 μC100\,\mathrm{\mu C}100μC and discharges through a resistor. Predict its charge after one time constant.
Show answer and explanation

Answer: D · Worked explanation

A discharging capacitor falls to about 37% of its starting charge after one time constant, so 0.37×100 μC≈37 μC0.37\times100\,\mathrm{\mu C}\approx37\,\mathrm{\mu C}0.37×100μC≈37μC. The value 63 μC63\,\mathrm{\mu C}63μC is the fraction gained when charging, not the fraction left. Zero is wrong because discharging only approaches zero over many time constants.
7.

Medium·Describe[1 mark]

How does the magnitude of the current change in a discharging RC circuit?
Show answer and explanation

Answer: B · Worked explanation

The current is the resistor’s potential difference divided by RRR, and that equals the capacitor’s potential difference. As the capacitor empties, the current decreases exponentially: steepest at the start, flattening later. A straight-line fall to zero at one time constant is wrong because at that moment about 37% of the initial current still flows.
8.

Hard·Calculate[2 marks]

An RC circuit has a time constant of 0.20 s0.20\,\mathrm{s}0.20s. Both the resistance and the capacitance are doubled. Calculate the new time constant.
Show answer and explanation

Answer: D · Worked explanation

The time constant is τ=RC\tau=RCτ=RC. Doubling RRR doubles it, and doubling CCC doubles it again, so the factor is 2×2=42\times2=42×2=4 and τ=4×0.20 s=0.80 s\tau=4\times0.20\,\mathrm{s}=0.80\,\mathrm{s}τ=4×0.20s=0.80s. The value 0.40 s0.40\,\mathrm{s}0.40s comes from counting only one of the two doublings, as if the changes added instead of multiplying. The value 0.20 s0.20\,\mathrm{s}0.20s would mean nothing had changed.
9.

Hard·Determine[2 marks]

A 12 V12\,\mathrm{V}12V battery charges an uncharged capacitor through a 2.0 kΩ2.0\,\mathrm{k\Omega}2.0kΩ resistor. Determine the current when the capacitor’s potential difference is 9.0 V9.0\,\mathrm{V}9.0V.
Show answer and explanation

Answer: C · Worked explanation

The resistor’s potential difference is 12 V−9.0 V=3.0 V12\,\mathrm{V}-9.0\,\mathrm{V}=3.0\,\mathrm{V}12V−9.0V=3.0V. The current is I=3.0 V2.0×103 Ω=1.5×10−3 AI=\frac{3.0\,\mathrm{V}}{2.0\times10^{3}\,\Omega}=1.5\times10^{-3}\,\mathrm{A}I=2.0×103Ω3.0V​=1.5×10−3A. The value 6.0 mA6.0\,\mathrm{mA}6.0mA is the starting current, and 4.5 mA4.5\,\mathrm{mA}4.5mA comes from dividing the capacitor’s 9.0 V9.0\,\mathrm{V}9.0V by RRR instead of the resistor’s share. The zero option would apply only after a very long time, when the capacitor is fully charged.
10.

Hard·Justify[2 marks]

A capacitor with the same initial potential difference discharges first through a small resistor and then through a larger one. Which statement is correct?
Show answer and explanation

Answer: C · Worked explanation

The initial current is ΔVR\frac{\Delta V}{R}RΔV​, so a larger resistance gives a smaller starting current. The time constant RCRCRC is also larger, so the capacitor takes longer to discharge. A larger initial current would require a smaller resistance, and a faster discharge would require a smaller time constant.

Keep going

Next topic12.1 Magnetic fieldsPrevious topic11.7 Kirchhoff's junction rule

More in Unit 11 · Electric Circuits

  1. 11.1Electric currentNotes · 10 questions
  2. 11.2Simple circuitsNotes · 10 questions
  3. 11.3Resistance, resistivity and Ohm's lawNotes · 10 questions
  4. 11.4Electric powerNotes · 10 questions
  5. 11.5Compound DC circuitsNotes · 10 questions
  6. 11.6Kirchhoff's loop ruleNotes · 10 questions
  7. 11.7Kirchhoff's junction ruleNotes · 10 questions
  8. 11.8RC circuitsNotes · 10 questions

All AP Physics 2 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1A capacitor charges gradually through a resistor
  2. 2Charging current starts large and falls toward zero
  3. 3The time constant sets how fast charging happens
  4. 4Discharging drives the same quantities back down
  5. 5Voltage and current graphs share one exponential shape
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Charging and discharging curves

Capacitor potential difference (V)00.10.20.30.40.5024681012Time (s)
  • Charging
  • Discharging
  • One time constant