AP Physics 2 · Unit 11 · Electric Circuits
11.5 Compound DC circuits
Analyze series and parallel resistor networks, calculate equivalent resistance, and find the current and potential difference for each resistor.
1/5Resistors in series share one current path
Part 1 of 5: Resistors in series share one current path
Think of old holiday lights wired in a single string. When one bulb fails, the whole string goes dark. The charge has only one path to follow.
That layout is a series connection. Every resistor carries the same current . The potential differences add up to the source’s potential difference: .
Applying to each resistor gives the equivalent resistance . It is larger than any single resistor in the chain.
Adding another resistor in series makes it harder for charge to pass. The same source then drives a smaller current.
Key terms · tap one for its definition
series connection
A series connection joins elements end to end along a single path, so the same current passes through each.
equivalent resistance
The equivalent resistance is the single resistance , in ohms, that draws the same current as the whole network from the same source.
Part 2 of 5: Resistors in parallel share one potential difference
Household outlets work differently. Each appliance has its own path to the source, so one can be switched off without affecting the rest. Every appliance receives the full outlet potential difference.
This is a parallel connection. Every branch has the same potential difference . The branch currents add up to the current leaving the source: .
Each branch obeys . This gives . The equivalent resistance is smaller than the smallest branch.
Series and parallel connections compared
- Feature
- Quantity that is the same
- Series
- current
- Parallel
- potential difference
- Feature
- Quantity that adds
- Series
- potential differences
- Parallel
- currents
- Feature
- compared with each resistor
- Series
- larger
- Parallel
- smaller
- Feature
- If one element is removed
- Series
- current stops everywhere
- Parallel
- other branches keep their current
Key term
parallel connection
A parallel connection joins elements across the same two points, so every branch has the same potential difference.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 3 of 5: A compound circuit reduces to one equivalent resistance
Real circuits often mix both layouts. A compound circuit contains series and parallel parts together. The method is to simplify it one piece at a time. Each replacement leaves the rest of the circuit unchanged.
- Find a group of resistors that is purely series or purely parallel.
- Replace that group with its equivalent resistance.
- Redraw the circuit and repeat until one resistor remains.
- Find the source current from .
In the circuit shown, and form a parallel pair. The resistor is in series with that pair.
Key term
compound circuit
A compound circuit is a circuit that combines series connections and parallel connections.
Part 4 of 5: Working back outward gives every current and voltage
Once the source current is known, reverse the reduction. Retrace each simplification in the opposite order. Each step uses the rule for series or for parallel. The series part carries the full source current, and the parallel pair shares whatever potential difference remains.
Worked example
A compound circuit with a 12 V battery
- Parallel pair: , so .
- Total: .
- Source current: . This is also the current in .
- Across : . The pair receives .
- Branches: and .
Answer: : 1.5 A and 6.0 V. : 1.0 A and 6.0 V. : 0.50 A and 6.0 V.
The branch currents add to 1.5 A, matching the current in . The smaller resistor carries the larger share of the current. Both branches have the same 6.0 V across them.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: D · Worked explanation
Part 5 of 5: Current and power checks confirm the answers
A finished solution should pass quick checks. The branch currents must add to the current entering the pair. The potential differences around the series part must add to the source’s potential difference.
Power gives a third check. Power is the rate of energy transfer, found from or . The powers dissipated in all the resistors must add to the power the source supplies.
In the example, the source supplies . The resistors dissipate 9.0 W, 6.0 W and 3.0 W, which also total 18 W.
Check your recall[13 marks]
5 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Calculate[2 marks]
Calculate the equivalent resistance of a resistor and a resistor connected in parallel.
Show mark schemeHide mark scheme
Model answer
, so .
- 1 mark for adding the reciprocals of the resistances
- 1 mark for obtaining
- 2.Describe[3 marks]
Describe how current and potential difference are shared among resistors in a series connection and in a parallel connection.
Show mark schemeHide mark scheme
Model answer
In a series connection every resistor carries the same current, and the potential differences add up to the source’s. In a parallel connection every branch has the same potential difference, and the branch currents add up to the source current.
- 1 mark for stating that resistors in series carry the same current and their potential differences add
- 1 mark for stating that parallel branches have the same potential difference
- 1 mark for stating that parallel branch currents add to the source current
- 3.Determine[4 marks]
A 24 V battery is connected to an resistor in series with a parallel pair of and resistors. Determine the current in each of the three resistors.
Show mark schemeHide mark scheme
Model answer
The pair has , so and in the resistor. It drops 12 V, leaving 12 V across the pair. The currents are and .
- 1 mark for finding the equivalent resistance of the pair as and the total as
- 1 mark for finding in the resistor
- 1 mark for finding 12 V across the parallel pair
- 1 mark for finding and in the branches
- 4.Explain[2 marks]
Explain why adding a resistor in parallel lowers the equivalent resistance of a circuit.
Show mark schemeHide mark scheme
Model answer
The new branch gives the current an extra path. At the same potential difference the source supplies more current, so becomes smaller.
- 1 mark for stating that the new branch provides an additional path for current
- 1 mark for linking a larger total current at the same potential difference to a smaller equivalent resistance
- 5.Predict[2 marks]
Predict what happens to the remaining bulbs when one bulb is removed from a string of bulbs in series, and when one is removed from a set of bulbs in parallel.
Show mark schemeHide mark scheme
Model answer
In series, all the bulbs go out because the single current path is broken. In parallel, the other bulbs keep their brightness because each branch still has the same potential difference.
- 1 mark for series: all remaining bulbs go out because the only path is broken
- 1 mark for parallel: the other bulbs are unaffected because each branch keeps the same potential difference

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyCalculate[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: A · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: A · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: A · Worked explanation
MediumPredict[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: A · Worked explanation
Hard[2 marks]
Show answer and explanation
Answer: C · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: B · Worked explanation