Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.5 Electricity
  4. ›3.5.1.2 Current–voltage characteristics

AQA A-level Physics · Section 3.5 · Electricity

3.5.1.2 Current–voltage characteristics

Sketch and interpret I–V graphs for resistors, filament lamps and diodes, compare ohmic and non-ohmic conductors, and explain why a diode conducts in one direction.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5An ohmic conductor gives a straight line through the origin
  1. 1An ohmic conductor gives a straight line through the origin
  2. 2The resistance of a filament lamp rises as it heats
  3. 3A diode conducts current in only one direction
  4. 4A junction between two semiconductors acts as a one-way barrier
  5. 5Comparing the three graphs shows how resistance varies
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: An ohmic conductor gives a straight line through the origin

A graph of current against potential difference shows how a component behaves. This graph is the component’s I–V characteristic. Put potential difference VVV on the horizontal axis and current III on the vertical axis.

Now link the graph to resistance, R=VIR=\frac{V}{I}R=IV​. When RRR is constant, doubling VVV doubles III. The graph is then a straight line through the origin.

A component that behaves like this is an ohmic conductor. A fixed resistor at constant temperature is the standard example. Reversing the supply gives a matching line through the negative axes.

Key terms · tap one for its definition

I–V characteristic

An I–V characteristic is a graph of the current through a component against the potential difference across it.

resistance

Resistance is the ratio of potential difference across a component to current through it.

ohmic conductor

An ohmic conductor is a component whose current is proportional to the potential difference across it at constant temperature.

Part 1 done

2

Part 2 of 5: The resistance of a filament lamp rises as it heats

A filament lamp behaves differently. As the potential difference rises, the current rises more slowly. The characteristic curves and flattens at larger values, and it is symmetrical about the origin.

Such a component is a non-ohmic conductor. Its resistance is not constant, so its current is not proportional to the potential difference.

The cause is temperature. A larger current heats the filament. Its ions vibrate with greater amplitude, so the free electrons collide with them more often. The resistance rises.

Figure 1. The resistor’s line is straight. The lamp’s curve flattens as the potential difference increases, so its resistance rises.

Common mistake

Resistance at a point is VI\frac{V}{I}IV​ at that point. It is not the gradient of the curve, and it is not the reciprocal of the tangent’s gradient.

Worked example

Resistance of a filament lamp

A lamp passes 0.30 A at 3.0 V and 0.60 A at 12 V. Calculate its resistance at each potential difference.
  1. 1
    Use R=VIR=\frac{V}{I}R=IV​ at each point.
  2. 2
    At 3.0 V3.0\,\mathrm{V}3.0V: R=3.0 V0.30 A=10 ΩR=\frac{3.0\,\mathrm{V}}{0.30\,\mathrm{A}}=10\,\OmegaR=0.30A3.0V​=10Ω.
  3. 3
    At 12 V12\,\mathrm{V}12V: R=12 V0.60 A=20 ΩR=\frac{12\,\mathrm{V}}{0.60\,\mathrm{A}}=20\,\OmegaR=0.60A12V​=20Ω.

Answer: The resistance rises from 10 Ω10\,\Omega10Ω to 20 Ω20\,\Omega20Ω. The potential difference quadrupled, but the current only doubled.

Key term

non-ohmic conductor

A non-ohmic conductor is a component whose current is not proportional to the potential difference across it.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the shape of the I–V characteristic of a fixed resistor at constant temperature.
Show answer and explanation

Answer: B · Worked explanation

A fixed resistor at constant temperature has constant resistance, so current is proportional to potential difference. This gives a straight line through the origin. A curve that flattens is the characteristic of a filament lamp, and a flat line followed by a steep rise is the characteristic of a diode.
3

Part 3 of 5: A diode conducts current in only one direction

A diode is a third kind of component. Its symbol is a triangle with a bar at the tip. Current passes easily in the direction the triangle points.

In this forward direction, almost no current flows at first. Above the threshold voltage, about 0.6 V for a typical silicon diode, the current rises very steeply.

In the reverse direction, the current is negligible. The characteristic is almost flat on the negative side.

Connecting the diode the wrong way round therefore stops the current. This makes diodes useful for protecting a circuit from a reversed supply.

Figure 2. Current is negligible in the reverse direction and below the threshold voltage. It then rises very steeply.

Key terms · tap one for its definition

diode

A diode is a component with very low resistance in its forward direction and very high resistance in the reverse direction.

threshold voltage

The threshold voltage of a diode is the forward potential difference above which it conducts a significant current.

Part 3 done

4

Part 4 of 5: A junction between two semiconductors acts as a one-way barrier

Now consider why this happens. A diode contains a junction between two types of semiconductor. The junction forms a barrier that charge carriers must cross.

In the forward direction, the applied potential difference works against the barrier. Above the threshold voltage the barrier is overcome, carriers cross easily and the resistance falls sharply.

In the reverse direction, the applied potential difference strengthens the barrier. Almost no carriers cross, so the resistance is extremely high.

Common mistake

A diode in reverse has a very high resistance, not an infinite one. The reverse current is tiny rather than exactly zero.

Go deeperWhat the barrier is

One side of the junction has extra electrons and the other has spaces called holes. Near the junction, electrons and holes combine, leaving a thin layer with no free charge carriers and a built-in potential difference.

A forward potential difference thins this layer, so carriers cross easily once the barrier is overcome. A reverse potential difference widens it, so almost nothing crosses.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the component that conducts current in only one direction.
Show answer and explanation

Answer: D · Worked explanation

A diode has a very low resistance in its forward direction and a very high resistance in the reverse direction, so it conducts in one direction only. A filament lamp, a fixed resistor and a copper wire all conduct in both directions, though the lamp’s resistance changes as it heats.
5

Part 5 of 5: Comparing the three graphs shows how resistance varies

Collect the three results together. The table shows how each component’s resistance changes as the current increases.

I–V behaviour of three components

ComponentI–V graphResistance as I risesType
Fixed resistorStraight line through originConstantOhmic
Filament lampCurve that flattensIncreasesNon-ohmic
DiodeFlat, then steep riseFalls once conductingNon-ohmic
Component
Fixed resistor
I–V graph
Straight line through origin
Resistance as I rises
Constant
Type
Ohmic
Component
Filament lamp
I–V graph
Curve that flattens
Resistance as I rises
Increases
Type
Non-ohmic
Component
Diode
I–V graph
Flat, then steep rise
Resistance as I rises
Falls once conducting
Type
Non-ohmic

The lamp’s resistance rises because of heating. The diode’s resistance falls because the barrier is overcome. In the reverse direction the diode’s resistance is very high.

A fixed resistor is ohmic only while its temperature stays constant. If it heats up a lot, its resistance changes and its line curves.

Exam tip

When you sketch an I–V graph, label both axes with units and mark the origin. Show the diode flat on the reverse side.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what is meant by an ohmic conductor.

    Show mark schemeHide mark scheme

    Model answer

    An ohmic conductor is a component whose current is proportional to the potential difference across it. This holds when physical conditions such as temperature stay constant.

    • 1 mark for stating that current is proportional to potential difference
    • 1 mark for stating that temperature or physical conditions are constant
  2. 2.Describe[2 marks]

    Describe the shape of the I–V characteristic of a filament lamp.

    Show mark schemeHide mark scheme

    Model answer

    It is a curve through the origin that is symmetrical for positive and negative values. The gradient decreases as the potential difference increases, so the curve flattens.

    • 1 mark for stating that it is a curve through the origin, symmetrical for both directions
    • 1 mark for stating that it flattens, with current rising more slowly at higher potential difference
  3. 3.Explain[3 marks]

    Explain why the resistance of a filament lamp increases as the current increases.

    Show mark schemeHide mark scheme

    Model answer

    A larger current heats the filament. The ions vibrate with greater amplitude. The free electrons therefore collide with ions more often, so the resistance rises.

    • 1 mark for stating that the filament temperature rises with current
    • 1 mark for stating that the ions vibrate more
    • 1 mark for linking more frequent collisions with free electrons to higher resistance
  4. 4.Calculate[2 marks]

    Calculate the resistance of a filament lamp when the potential difference across it is 9.0 V9.0\,\mathrm{V}9.0V and the current is 0.45 A0.45\,\mathrm{A}0.45A.

    Show mark schemeHide mark scheme

    Model answer

    R=VI=9.0 V0.45 A=20 ΩR=\frac{V}{I}=\frac{9.0\,\mathrm{V}}{0.45\,\mathrm{A}}=20\,\OmegaR=IV​=0.45A9.0V​=20Ω.

    • 1 mark for using R=VIR=\frac{V}{I}R=IV​
    • 1 mark for obtaining 20 Ω20\,\Omega20Ω
  5. 5.Explain[3 marks]

    Explain why a diode conducts in one direction only.

    Show mark schemeHide mark scheme

    Model answer

    A diode contains a junction between two types of semiconductor that acts as a barrier to charge carriers. In the forward direction, above the threshold voltage, carriers cross it easily. In the reverse direction the barrier is strengthened, so almost no current flows.

    • 1 mark for stating that the junction acts as a barrier to charge carriers
    • 1 mark for stating that forward potential difference above the threshold lets carriers cross
    • 1 mark for stating that reverse potential difference strengthens the barrier so almost no current flows
  6. 6.Compare[3 marks]

    Compare the I–V characteristics of a fixed resistor and a diode.

    Show mark schemeHide mark scheme

    Model answer

    The resistor’s characteristic is a straight line through the origin, symmetrical for both directions, so its resistance is constant. The diode’s characteristic is almost flat in the reverse direction and below the threshold voltage. It then rises steeply, so its resistance falls.

    • 1 mark for stating that the resistor gives a straight line through the origin with constant resistance
    • 1 mark for stating that the diode conducts almost nothing in reverse or below the threshold
    • 1 mark for stating that the diode current rises steeply above the threshold so its resistance falls

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State how the resistance of a filament lamp changes as the current through it increases.
Show answer and explanation

Answer: B · Worked explanation

A larger current heats the filament, so its ions vibrate more and collide with free electrons more often. The resistance therefore rises. Saying that it stays the same describes an ohmic conductor at constant temperature, which a heating filament is not.
4.

Medium·Calculate[1 mark]

The potential difference across a lamp is 6.0 V6.0\,\mathrm{V}6.0V and the current through it is 0.40 A0.40\,\mathrm{A}0.40A. Calculate its resistance.
Show answer and explanation

Answer: B · Worked explanation

Resistance is the ratio of potential difference to current, so R=VI=6.00.40=15 ΩR=\frac{V}{I}=\frac{6.0}{0.40}=15\,\OmegaR=IV​=0.406.0​=15Ω. The value 2.4 Ω2.4\,\Omega2.4Ω comes from multiplying the two quantities. The value 0.067 Ω0.067\,\Omega0.067Ω comes from dividing current by potential difference, which gives the reciprocal. The unit of the correct answer is the ohm, which is a volt per ampere.
5.

Medium·Determine[2 marks]

A lamp passes 0.20 A0.20\,\mathrm{A}0.20A at 2.0 V2.0\,\mathrm{V}2.0V and 0.30 A0.30\,\mathrm{A}0.30A at 4.0 V4.0\,\mathrm{V}4.0V. Determine how its resistance changes.
Show answer and explanation

Answer: A · Worked explanation

At 2.0 V2.0\,\mathrm{V}2.0V, R=2.00.20=10 ΩR=\frac{2.0}{0.20}=10\,\OmegaR=0.202.0​=10Ω. At 4.0 V4.0\,\mathrm{V}4.0V, R=4.00.30=13 ΩR=\frac{4.0}{0.30}=13\,\OmegaR=0.304.0​=13Ω, so the resistance rises. The value 6.7 Ω6.7\,\Omega6.7Ω comes from pairing 2.0 V2.0\,\mathrm{V}2.0V with 0.30 A0.30\,\mathrm{A}0.30A, which mixes readings from different rows. The value 20 Ω20\,\Omega20Ω would need the current to stay at 0.20 A0.20\,\mathrm{A}0.20A. A rising resistance is what a heating filament produces.
6.

Medium·Explain[1 mark]

Explain why the resistance of a filament lamp rises as the current increases.
Show answer and explanation

Answer: A · Worked explanation

A larger current heats the filament and the ions vibrate with greater amplitude. Free electrons then collide with the ions more often, so the resistance rises. The number of free electrons in a metal does not fall as it heats, so fewer free electrons is a common but incorrect explanation.
7.

Medium·Predict[2 marks]

A diode is connected so that the potential difference across it is −3.0 V-3.0\,\mathrm{V}−3.0V, in the reverse direction. Predict the current.
Show answer and explanation

Answer: C · Worked explanation

In the reverse direction the applied potential difference strengthens the barrier at the junction, so almost no carriers cross and the current is negligible. The threshold voltage applies only to the forward direction, so a large reverse potential difference does not cause a large current. A reversed copy of the forward current would suggest a resistor-like response.
8.

Hard·Calculate[2 marks]

The point on a lamp’s I–V curve at 8.0 V8.0\,\mathrm{V}8.0V and 0.50 A0.50\,\mathrm{A}0.50A has a tangent with gradient 0.020 A V−10.020\,\mathrm{A\,V^{-1}}0.020AV−1. Calculate the resistance of the lamp at this point.
Show answer and explanation

Answer: D · Worked explanation

Resistance at a point is VI=8.00.50=16 Ω\frac{V}{I}=\frac{8.0}{0.50}=16\,\OmegaIV​=0.508.0​=16Ω. The tangent’s gradient is not needed. The value 50 Ω50\,\Omega50Ω comes from taking the reciprocal of the tangent’s gradient, which is the mistake of treating the curve’s slope as if it gave the resistance at the point.
9.

Hard·Identify[2 marks]

A fixed resistor gives a straight I–V line at low potential differences, but the line curves towards the potential difference axis at high values. Identify the most likely explanation.
Show answer and explanation

Answer: D · Worked explanation

A line that curves towards the potential difference axis means the current is rising more slowly than proportionally, so the resistance is increasing. A resistor that warms up has rising resistance, and Ohm’s law only holds at constant temperature. Ohm’s law does not fail for every conductor at a fixed voltage, because the limit is set by physical conditions.
10.

Hard·Calculate[2 marks]

A lamp passes 0.60 A0.60\,\mathrm{A}0.60A at 12.0 V12.0\,\mathrm{V}12.0V and 0.25 A0.25\,\mathrm{A}0.25A at 3.0 V3.0\,\mathrm{V}3.0V. Calculate the ratio of its resistance at 12.0 V12.0\,\mathrm{V}12.0V to its resistance at 3.0 V3.0\,\mathrm{V}3.0V.
Show answer and explanation

Answer: D · Worked explanation

At 12.0 V12.0\,\mathrm{V}12.0V, R=12.00.60=20 ΩR=\frac{12.0}{0.60}=20\,\OmegaR=0.6012.0​=20Ω. At 3.0 V3.0\,\mathrm{V}3.0V, R=3.00.25=12 ΩR=\frac{3.0}{0.25}=12\,\OmegaR=0.253.0​=12Ω. The ratio is 2012=1.7\frac{20}{12}=1.71220​=1.7. The value 2.4 is the ratio of the currents, and 4.0 is the ratio of the potential differences. Neither of these is a ratio of resistances. Resistance is potential difference divided by current, so each value must be found separately before the ratio is taken.

Keep going

Next topic3.5.1.3 ResistivityPrevious topic3.5.1.1 Basics of electricity

More in Section 3.5 · Electricity

  1. 3.5.1.1Basics of electricityNotes · 10 questions
  2. 3.5.1.2Current–voltage characteristicsNotes · 10 questions
  3. 3.5.1.3ResistivityNotes · 10 questions
  4. 3.5.1.4CircuitsNotes · 10 questions
  5. 3.5.1.5Potential dividersNotes · 10 questions
  6. 3.5.1.6EMF and internal resistanceNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1An ohmic conductor gives a straight line through the origin
  2. 2The resistance of a filament lamp rises as it heats
  3. 3A diode conducts current in only one direction
  4. 4A junction between two semiconductors acts as a one-way barrier
  5. 5Comparing the three graphs shows how resistance varies
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

I–V characteristics of a resistor and a lamp

Current (A)-6-4-20246-0.4-0.200.20.40.6Potential difference (V)
  • Fixed resistor
  • Filament lamp

I–V characteristic of a diode

Current (mA)-1-0.500.51010203040Potential difference (V)
  • Diode
  • Threshold, about 0.6 V