Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.5 Electricity
  4. ›3.5.1.4 Circuits

AQA A-level Physics · Section 3.5 · Electricity

3.5.1.4 Circuits

Draw circuit diagrams with standard symbols, apply the series and parallel rules, and calculate total resistance and the sharing of potential difference.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A circuit diagram uses standard symbols for components
  1. 1A circuit diagram uses standard symbols for components
  2. 2Components in series share the same current
  3. 3Components in parallel share the same potential difference
  4. 4Adding resistors raises series resistance but lowers parallel resistance
  5. 5Potential difference divides in proportion to resistance in series
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A circuit diagram uses standard symbols for components

Directions are easier to follow on a map than in a long description. A circuit diagram does the same job for a circuit. It uses standard symbols joined by straight lines.

Common circuit symbols

ComponentSymbol is drawn asRole
Cellone long line and one short linesupplies energy
Resistora small rectangleopposes current
Switcha line with a gap that can closeopens or closes the circuit
Lampa circle containing a crosstransfers energy as light
Ammetera circle containing Ameasures current
Voltmetera circle containing Vmeasures potential difference
Component
Cell
Symbol is drawn as
one long line and one short line
Role
supplies energy
Component
Resistor
Symbol is drawn as
a small rectangle
Role
opposes current
Component
Switch
Symbol is drawn as
a line with a gap that can close
Role
opens or closes the circuit
Component
Lamp
Symbol is drawn as
a circle containing a cross
Role
transfers energy as light
Component
Ammeter
Symbol is drawn as
a circle containing A
Role
measures current
Component
Voltmeter
Symbol is drawn as
a circle containing V
Role
measures potential difference

Draw wires as straight lines with right-angled corners. A dot marks a junction where wires join. Wires that cross without a dot are not connected. Each symbol stands for one component, so anyone can read the diagram without seeing the real parts.

Exam tip

Draw a dot at every junction. Without it, a marker may read your crossing wires as unconnected.

Key term

circuit diagram

A circuit diagram uses standard symbols and lines to show how electrical components connect.

Part 1 done

2

Part 2 of 5: Components in series share the same current

Picture runners on a single track. Every runner passes each point at the same rate. Components in series behave in the same way. This is why one faulty bulb can stop a whole string of lights wired in series.

There is only one route, so the current III is the same everywhere. The cell transfers energy to every component along the way. The potential difference (p.d.) across the cell equals the sum of the p.d. across the components.

Recall that resistance RRR is VI\frac{V}{I}IV​ for a component, where VVV is the p.d. across it. Because III is common, V=IR1+IR2+IR3V=IR_1+IR_2+IR_3V=IR1​+IR2​+IR3​. Dividing by III gives Rtotal=R1+R2+R3R_\mathrm{total}=R_1+R_2+R_3Rtotal​=R1​+R2​+R3​.

The total is always larger than the largest single resistance.

Key terms · tap one for its definition

series

Components in series lie on one path and carry the same current.

potential difference

The energy transferred per unit charge between two points, measured in volts.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify how a voltmeter should be connected to measure the potential difference across a resistor.
Show answer and explanation

Answer: C · Worked explanation

A voltmeter measures the p.d. between two points, so it connects across the two ends of the resistor, in parallel with it. A voltmeter placed in series would sit on the single path and measure the wrong quantity. An ammeter, not a voltmeter, is placed in series because it measures the current.
3

Part 3 of 5: Components in parallel share the same potential difference

Now picture a road that splits into two lanes and then joins again. Cars choose either lane. Components in parallel connect across the same two points. A junction is a point where branches meet.

Each branch has the same p.d. as the source. Charge is not lost at a junction, so the currents in the branches add to the total: I=I1+I2I=I_1+I_2I=I1​+I2​.

Figure 1. In the series circuit the resistors lie on one path. In the parallel circuit each resistor has its own branch across the same two points.

Each branch carries I=VRI=\frac{V}{R}I=RV​, and VVV is common. Adding the currents and dividing by VVV gives 1Rtotal=1R1+1R2+⋯\frac{1}{R_\mathrm{total}}=\frac{1}{R_1}+\frac{1}{R_2}+\cdotsRtotal​1​=R1​1​+R2​1​+⋯. The total is smaller than the smallest single resistance.

Worked example

Total resistance in parallel

A 6.0 Ω6.0\,\Omega6.0Ω resistor and a 3.0 Ω3.0\,\Omega3.0Ω resistor are connected in parallel across a 12 V supply. Calculate the total resistance and the total current.
  1. 1
    Use 1Rtotal=1R1+1R2\frac{1}{R_\mathrm{total}}=\frac{1}{R_1}+\frac{1}{R_2}Rtotal​1​=R1​1​+R2​1​.
  2. 2
    Substitute: 1Rtotal=16.0+13.0=16.0+26.0=36.0\frac{1}{R_\mathrm{total}}=\frac{1}{6.0}+\frac{1}{3.0}=\frac{1}{6.0}+\frac{2}{6.0}=\frac{3}{6.0}Rtotal​1​=6.01​+3.01​=6.01​+6.02​=6.03​.
  3. 3
    Invert: Rtotal=2.0 ΩR_\mathrm{total}=2.0\,\OmegaRtotal​=2.0Ω.
  4. 4
    Total current: I=VRtotal=12 V2.0 Ω=6.0 AI=\frac{V}{R_\mathrm{total}}=\frac{12\,\mathrm{V}}{2.0\,\Omega}=6.0\,\mathrm{A}I=Rtotal​V​=2.0Ω12V​=6.0A.

Answer: The total resistance is 2.0 Ω2.0\,\Omega2.0Ω and the total current is 6.0 A.

Key term

parallel

Components in parallel connect across the same two points and share a potential difference.

Part 3 done

4

Part 4 of 5: Adding resistors raises series resistance but lowers parallel resistance

A resistor added in series makes the single path harder to push charge along. The total resistance rises and the current falls. For example, two lamps in series with one cell are dimmer than a single lamp.

A resistor added in parallel gives charge a new route. The total resistance falls, so the supply delivers more current. Each new branch adds its own current to the total. Plugging more appliances into a home circuit works this way.

Series and parallel rules compared

QuantitySeriesParallel
Currentsame in every componentdivides between the branches
Potential differenceshared between the componentssame across every branch
Total resistanceRtotal=R1+R2R_\mathrm{total}=R_1+R_2Rtotal​=R1​+R2​1Rtotal=1R1+1R2\frac{1}{R_\mathrm{total}}=\frac{1}{R_1}+\frac{1}{R_2}Rtotal​1​=R1​1​+R2​1​
Adding a resistortotal resistance risestotal resistance falls
Quantity
Current
Series
same in every component
Parallel
divides between the branches
Quantity
Potential difference
Series
shared between the components
Parallel
same across every branch
Quantity
Total resistance
Series
Rtotal=R1+R2R_\mathrm{total}=R_1+R_2Rtotal​=R1​+R2​
Parallel
1Rtotal=1R1+1R2\frac{1}{R_\mathrm{total}}=\frac{1}{R_1}+\frac{1}{R_2}Rtotal​1​=R1​1​+R2​1​
Quantity
Adding a resistor
Series
total resistance rises
Parallel
total resistance falls

Common mistake

Adding a resistor does not always raise the total resistance. In parallel it lowers the total, because charge gains another path.

Part 4 done

Quick check

One question on the part you just read

Easy

Three resistors are connected in series. The current in the first resistor is 0.50 A. Determine the current in the third resistor.
Show answer and explanation

Answer: D · Worked explanation

Components in series lie on one path, so the same current flows through each of them. The current in the third resistor is therefore 0.50 A0.50\,\mathrm{A}0.50A. The value 1.5 A comes from adding the currents, which is the rule for branches in parallel. The value 0.17 A comes from dividing the current between the three resistors.
5

Part 5 of 5: Potential difference divides in proportion to resistance in series

Return to a series circuit. The current is the same through every resistor, so V=IRV=IRV=IR decides each share. A larger resistor has a larger p.d. across it. Think of the supply p.d. as a fixed amount that is shared out, with the parts adding up to the whole.

Equal resistors share the supply equally. A resistor twice as large takes twice the p.d. The ratio of two p.d. equals the ratio of the two resistances: V1V2=R1R2\frac{V_1}{V_2}=\frac{R_1}{R_2}V2​V1​​=R2​R1​​.

Worked example

Sharing potential difference

A 12 V supply is connected across a 4.0 Ω4.0\,\Omega4.0Ω resistor and an 8.0 Ω8.0\,\Omega8.0Ω resistor in series. Calculate the p.d. across each resistor.
  1. 1
    Total resistance: Rtotal=4.0 Ω+8.0 Ω=12 ΩR_\mathrm{total}=4.0\,\Omega+8.0\,\Omega=12\,\OmegaRtotal​=4.0Ω+8.0Ω=12Ω.
  2. 2
    Current: I=VRtotal=12 V12 Ω=1.0 AI=\frac{V}{R_\mathrm{total}}=\frac{12\,\mathrm{V}}{12\,\Omega}=1.0\,\mathrm{A}I=Rtotal​V​=12Ω12V​=1.0A.
  3. 3
    Across the first resistor: V1=IR1=1.0 A×4.0 Ω=4.0 VV_1=IR_1=1.0\,\mathrm{A}\times4.0\,\Omega=4.0\,\mathrm{V}V1​=IR1​=1.0A×4.0Ω=4.0V.
  4. 4
    Across the second resistor: V2=IR2=1.0 A×8.0 Ω=8.0 VV_2=IR_2=1.0\,\mathrm{A}\times8.0\,\Omega=8.0\,\mathrm{V}V2​=IR2​=1.0A×8.0Ω=8.0V.

Answer: The p.d. values are 4.0 V and 8.0 V, which add to 12 V.

Exam tip

Give the reason: the current is the same, so the p.d. is proportional to resistance.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State how current and potential difference are shared between components in series.

    Show mark schemeHide mark scheme

    Model answer

    The current is the same through every component in series. The supply p.d. is shared between the components, so the p.d. across the components add up to the supply p.d.

    • 1 mark for stating that the current is the same in all components in series
    • 1 mark for stating that the p.d. across the components add up to the supply p.d.
  2. 2.Calculate[3 marks]

    Calculate the total resistance of a 12 Ω12\,\Omega12Ω resistor and a 4.0 Ω4.0\,\Omega4.0Ω resistor connected in parallel.

    Show mark schemeHide mark scheme

    Model answer

    1Rtotal=112+14.0=112+312=412\frac{1}{R_\mathrm{total}}=\frac{1}{12}+\frac{1}{4.0}=\frac{1}{12}+\frac{3}{12}=\frac{4}{12}Rtotal​1​=121​+4.01​=121​+123​=124​, so Rtotal=3.0 ΩR_\mathrm{total}=3.0\,\OmegaRtotal​=3.0Ω.

    • 1 mark for using 1Rtotal=1R1+1R2\frac{1}{R_\mathrm{total}}=\frac{1}{R_1}+\frac{1}{R_2}Rtotal​1​=R1​1​+R2​1​
    • 1 mark for adding the fractions to obtain 412\frac{4}{12}124​ or 13\frac{1}{3}31​
    • 1 mark for obtaining 3.0 Ω3.0\,\Omega3.0Ω
  3. 3.Calculate[3 marks]

    Calculate the p.d. across a 200 Ω200\,\Omega200Ω resistor that is in series with a 100 Ω100\,\Omega100Ω resistor across a 9.0 V supply.

    Show mark schemeHide mark scheme

    Model answer

    Rtotal=100+200=300 ΩR_\mathrm{total}=100+200=300\,\OmegaRtotal​=100+200=300Ω. I=9.0300=0.030 AI=\frac{9.0}{300}=0.030\,\mathrm{A}I=3009.0​=0.030A. V=IR=0.030×200=6.0 VV=IR=0.030\times200=6.0\,\mathrm{V}V=IR=0.030×200=6.0V.

    • 1 mark for adding the resistances to obtain 300 Ω300\,\Omega300Ω
    • 1 mark for obtaining the current 0.030 A0.030\,\mathrm{A}0.030A
    • 1 mark for obtaining 6.0 V across the 200 Ω200\,\Omega200Ω resistor
  4. 4.Explain[3 marks]

    Explain why adding a resistor in parallel decreases the total resistance of a circuit.

    Show mark schemeHide mark scheme

    Model answer

    The extra resistor provides another path for charge. The supply p.d. is unchanged, so more current flows in total. The total resistance equals the p.d. divided by the total current, so it falls.

    • 1 mark for stating that the extra resistor provides another path
    • 1 mark for stating that the total current increases for the same supply p.d.
    • 1 mark for linking the larger current to a smaller total resistance, using R=VIR=\frac{V}{I}R=IV​
  5. 5.Compare[3 marks]

    Compare what happens to the current in a lamp, connected to a supply that keeps a constant p.d., when an identical second lamp is added in series and when it is added in parallel.

    Show mark schemeHide mark scheme

    Model answer

    In series, the total resistance doubles and the current in the lamp falls. In parallel, the first lamp still has the full supply p.d., so its current is unchanged. The total current from the supply rises.

    • 1 mark for stating that in series the total resistance rises, so the current in the lamp falls
    • 1 mark for stating that in parallel the first lamp keeps the same p.d. and the same current
    • 1 mark for stating that in parallel the total current from the supply increases

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Determine[1 mark]

Two resistors are connected in parallel across a 6.0 V supply. Determine the potential difference across each resistor.
Show answer and explanation

Answer: D · Worked explanation

Components in parallel connect across the same two points and share a potential difference, so each resistor has 6.0 V6.0\,\mathrm{V}6.0V across it. The value 3.0 V comes from splitting the supply equally, which applies to equal resistors in series. The value 12 V comes from adding the p.d. across the two branches.
4.

Medium·Calculate[1 mark]

Resistors of 22 Ω22\,\Omega22Ω, 33 Ω33\,\Omega33Ω and 45 Ω45\,\Omega45Ω are connected in series. Calculate the total resistance.
Show answer and explanation

Answer: B · Worked explanation

For resistors in series, Rtotal=22+33+45=100 ΩR_\mathrm{total}=22+33+45=100\,\OmegaRtotal​=22+33+45=100Ω. The value 10 Ω10\,\Omega10Ω is close to what the parallel rule would give, which is the wrong rule here. The value 33 Ω33\,\Omega33Ω is the mean of the three resistances, and 45 Ω45\,\Omega45Ω is just the largest of them. The series total must exceed every single resistor.
5.

Medium·Calculate[2 marks]

Calculate the total resistance of an 8.0 Ω8.0\,\Omega8.0Ω resistor and a 24 Ω24\,\Omega24Ω resistor connected in parallel.
Show answer and explanation

Answer: B · Worked explanation

Use 1Rtotal=18.0+124=324+124=424\frac{1}{R_\mathrm{total}}=\frac{1}{8.0}+\frac{1}{24}=\frac{3}{24}+\frac{1}{24}=\frac{4}{24}Rtotal​1​=8.01​+241​=243​+241​=244​, so Rtotal=6.0 ΩR_\mathrm{total}=6.0\,\OmegaRtotal​=6.0Ω. The value 0.17 Ω0.17\,\Omega0.17Ω is the sum of the reciprocals, 1Rtotal\frac{1}{R_\mathrm{total}}Rtotal​1​, before inverting. The value 32 Ω32\,\Omega32Ω comes from adding the resistances, which is the series rule. A parallel total must also be smaller than 8.0 Ω8.0\,\Omega8.0Ω.
6.

Medium·Calculate[2 marks]

A 12 V supply is connected across a 20 Ω20\,\Omega20Ω resistor and a 40 Ω40\,\Omega40Ω resistor in series. Calculate the potential difference across the 20 Ω20\,\Omega20Ω resistor.
Show answer and explanation

Answer: C · Worked explanation

The total resistance is 60 Ω60\,\Omega60Ω, so I=1260=0.20 AI=\frac{12}{60}=0.20\,\mathrm{A}I=6012​=0.20A. Then V=IR=0.20×20=4.0 VV=IR=0.20\times20=4.0\,\mathrm{V}V=IR=0.20×20=4.0V. The value 8.0 V is the p.d. across the 40 Ω40\,\Omega40Ω resistor, the other share of the supply. The value 6.0 V comes from sharing the supply equally, which would need equal resistors.
7.

Medium·Predict[1 mark]

Two identical lamps are connected in parallel across a supply that keeps a constant p.d. across its terminals. A third identical lamp is added in parallel. Predict the effect.
Show answer and explanation

Answer: D · Worked explanation

The new lamp provides another path, so the total resistance falls and the supply gives more current. Each original lamp still has the full supply p.d. across it, so its current does not change. The idea that the original lamps receive less current would apply to lamps added in series.
8.

Hard·Determine[2 marks]

A 4.0 Ω4.0\,\Omega4.0Ω resistor is in series with a parallel pair made of a 6.0 Ω6.0\,\Omega6.0Ω and a 12 Ω12\,\Omega12Ω resistor. A 24 V supply is connected across the whole arrangement. Determine the current in the 6.0 Ω6.0\,\Omega6.0Ω resistor.
Show answer and explanation

Answer: B · Worked explanation

The parallel pair has 1R=16.0+112=312\frac{1}{R}=\frac{1}{6.0}+\frac{1}{12}=\frac{3}{12}R1​=6.01​+121​=123​, so R=4.0 ΩR=4.0\,\OmegaR=4.0Ω. The total is 8.0 Ω8.0\,\Omega8.0Ω and the supply current is 3.0 A3.0\,\mathrm{A}3.0A. The 4.0 Ω4.0\,\Omega4.0Ω resistor takes 12 V, leaving 12 V across the pair, so I=126.0=2.0 AI=\frac{12}{6.0}=2.0\,\mathrm{A}I=6.012​=2.0A. The value 3.0 A is the total current, not the current in one branch.
9.

Hard·Determine[2 marks]

Three identical resistors connected in parallel have a total resistance of 4.0 Ω4.0\,\Omega4.0Ω. Determine the resistance of one resistor.
Show answer and explanation

Answer: C · Worked explanation

For three equal resistors in parallel, 1Rtotal=3R\frac{1}{R_\mathrm{total}}=\frac{3}{R}Rtotal​1​=R3​, so R=3×Rtotal=12 ΩR=3\times R_\mathrm{total}=12\,\OmegaR=3×Rtotal​=12Ω. The value 1.3 Ω1.3\,\Omega1.3Ω comes from dividing the total by three, which reverses the relationship. The total of a parallel set must be smaller than any single resistor, so each resistor must exceed 4.0 Ω4.0\,\Omega4.0Ω.
10.

Hard·Determine[2 marks]

A 9.0 V supply is connected across a 50 Ω50\,\Omega50Ω resistor in series with a second resistor RRR. The p.d. across the 50 Ω50\,\Omega50Ω resistor is 6.0 V. Determine RRR.
Show answer and explanation

Answer: C · Worked explanation

The current is I=6.050=0.12 AI=\frac{6.0}{50}=0.12\,\mathrm{A}I=506.0​=0.12A. The p.d. across RRR is 9.0−6.0=3.0 V9.0-6.0=3.0\,\mathrm{V}9.0−6.0=3.0V, so R=3.00.12=25 ΩR=\frac{3.0}{0.12}=25\,\OmegaR=0.123.0​=25Ω. The value 75 Ω75\,\Omega75Ω is the total resistance of the circuit, not the second resistor. The value 100 Ω100\,\Omega100Ω comes from reversing the ratio, although the smaller p.d. belongs to the smaller resistance.

Keep going

Next topic3.5.1.5 Potential dividersPrevious topic3.5.1.3 Resistivity

More in Section 3.5 · Electricity

  1. 3.5.1.1Basics of electricityNotes · 10 questions
  2. 3.5.1.2Current–voltage characteristicsNotes · 10 questions
  3. 3.5.1.3ResistivityNotes · 10 questions
  4. 3.5.1.4CircuitsNotes · 10 questions
  5. 3.5.1.5Potential dividersNotes · 10 questions
  6. 3.5.1.6EMF and internal resistanceNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1A circuit diagram uses standard symbols for components
  2. 2Components in series share the same current
  3. 3Components in parallel share the same potential difference
  4. 4Adding resistors raises series resistance but lowers parallel resistance
  5. 5Potential difference divides in proportion to resistance in series
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe