Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.6 Further mechanics and thermal physics
  4. ›3.6.1.2 Simple harmonic motion

AQA A-level Physics · Section 3.6 · Further mechanics and thermal physics

3.6.1.2 Simple harmonic motion

Describe the conditions for simple harmonic motion, and use its equations and graphs to find displacement, velocity, acceleration and period.

  • 3 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Simple harmonic motion has a restoring acceleration
  1. 1Simple harmonic motion has a restoring acceleration
  2. 2Amplitude, period and frequency describe each oscillation
  3. 3Equations give displacement, velocity and acceleration at any time
  4. 4Displacement, velocity and acceleration graphs are shifted versions of one curve
  5. 5A straight-line graph of acceleration against displacement identifies SHM
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Simple harmonic motion has a restoring acceleration

Pull a mass on a spring aside and let go. It oscillates about its equilibrium position, where the resultant force on it is zero. The object always accelerates back towards the middle.

The displacement, xxx, is measured from the equilibrium position, with direction given by sign. The motion is simple harmonic motion when the acceleration is proportional to the displacement and directed towards equilibrium.

In symbols, a=−ω2xa=-\omega^2xa=−ω2x, where ω\omegaω is a constant for the system. The minus sign shows that acceleration is opposite to displacement.

Common mistake

Proportional to displacement is not enough on its own. The acceleration must also point towards equilibrium, which is what the minus sign shows.

Key terms · tap one for its definition

displacement

Displacement is the vector change in position from an initial position to a final position.

simple harmonic motion

Oscillation in which acceleration is proportional to displacement from equilibrium and directed towards equilibrium.

Part 1 done

2

Part 2 of 5: Amplitude, period and frequency describe each oscillation

Now we can name the features of a single oscillation. The amplitude, AAA, is the largest displacement from equilibrium. The period, TTT, is the time for one full oscillation. The frequency, fff, is the number of oscillations each second.

Frequency is measured in hertz, Hz\mathrm{Hz}Hz, where 1 Hz=1 s−11\,\mathrm{Hz}=1\,\mathrm{s^{-1}}1Hz=1s−1. Period and frequency are linked by f=1Tf=\frac{1}{T}f=T1​. The constant ω\omegaω in the acceleration equation obeys ω=2πf=2πT\omega=2\pi f=\frac{2\pi}{T}ω=2πf=T2π​.

In SHM the period does not depend on the amplitude. A large swing and a small swing take the same time. The larger swing simply moves faster.

Key terms · tap one for its definition

amplitude

Amplitude is the maximum displacement of an oscillation from its undisturbed position.

period

The time taken to complete one oscillation.

frequency

Frequency is the number of complete oscillations per second.

Part 2 done

Quick check

One question on the part you just read

Easy

State the condition for motion to be simple harmonic.
Show answer and explanation

Answer: A · Worked explanation

In SHM the acceleration depends on position: it grows with the displacement and always points back towards equilibrium. A constant acceleration would give a different motion. Acceleration directed away from equilibrium would push the object further out rather than give oscillation.
3

Part 3 of 5: Equations give displacement, velocity and acceleration at any time

Now we can write the motion as a function of time. If the object starts at maximum displacement, x=Acos⁡ωtx=A\cos\omega tx=Acosωt. If it starts at equilibrium, x=Asin⁡ωtx=A\sin\omega tx=Asinωt. The angle ωt\omega tωt is in radians and increases steadily, so the motion repeats every period. Three more results are worth knowing.

  • Speed at displacement xxx is v=±ωA2−x2v=\pm\omega\sqrt{A^2-x^2}v=±ωA2−x2​.
  • Maximum speed is vmax=ωAv_\mathrm{max}=\omega Avmax​=ωA, reached at equilibrium.
  • Maximum acceleration is amax=ω2Aa_\mathrm{max}=\omega^2Aamax​=ω2A, reached at maximum displacement.

Exam tip

Set your calculator to radians when evaluating cos⁡ωt\cos\omega tcosωt or sin⁡ωt\sin\omega tsinωt. Degree mode gives wrong values, because ωt\omega tωt is an angle in radians.

Worked example

Maximum speed and acceleration

A mass oscillates with amplitude 0.040 m and period 0.50 s. Calculate its maximum speed and maximum acceleration.
  1. 1
    Angular frequency: ω=2πT=2π0.50 s=12.6 rad s−1\omega=\frac{2\pi}{T}=\frac{2\pi}{0.50\,\mathrm{s}}=12.6\,\mathrm{rad\,s^{-1}}ω=T2π​=0.50s2π​=12.6rads−1.
  2. 2
    Maximum speed: vmax=ωA=12.6×0.040 m=0.50 m s−1v_\mathrm{max}=\omega A=12.6\times0.040\,\mathrm{m}=0.50\,\mathrm{m\,s^{-1}}vmax​=ωA=12.6×0.040m=0.50ms−1.
  3. 3
    Maximum acceleration: amax=ω2A=12.62×0.040 m=6.3 m s−2a_\mathrm{max}=\omega^2A=12.6^2\times0.040\,\mathrm{m}=6.3\,\mathrm{m\,s^{-2}}amax​=ω2A=12.62×0.040m=6.3ms−2.

Answer: The maximum speed is 0.50 m s−10.50\,\mathrm{m\,s^{-1}}0.50ms−1 and the maximum acceleration is 6.3 m s−26.3\,\mathrm{m\,s^{-2}}6.3ms−2.

Part 3 done

4

Part 4 of 5: Displacement, velocity and acceleration graphs are shifted versions of one curve

The equations above give three graphs against time. Take an object that starts at maximum displacement. Its displacement graph is a cosine curve. Velocity is the gradient of displacement, so its graph is a negative sine curve. Acceleration is the gradient of the velocity graph, giving a negative cosine curve.

Figure 1. Each curve is divided by its maximum value so all three fit on one axis. Velocity is zero where displacement is at a maximum.
  • Velocity is zero whenever displacement is at its maximum.
  • Speed is greatest as the object passes through equilibrium.
  • Acceleration is always opposite in sign to displacement.

Common mistake

Acceleration is zero at equilibrium, not at the extremes. At the extremes the object is briefly at rest but accelerating strongly.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify where the speed of an object in SHM is greatest.
Show answer and explanation

Answer: C · Worked explanation

The speed is given by v=ωA2−x2v=\omega\sqrt{A^2-x^2}v=ωA2−x2​, which is largest when x=0x=0x=0, at equilibrium. At maximum displacement the object is momentarily at rest, so the speed there is zero, not greatest. Midway, the speed is smaller than at equilibrium, because the speed falls steadily as the displacement grows.
5

Part 5 of 5: A straight-line graph of acceleration against displacement identifies SHM

Experiments often give acceleration and displacement rather than time. Measure the acceleration at several displacements and plot aaa against xxx. SHM gives a straight line through the origin with a negative gradient. Acceleration can come from a motion sensor or from the gradient of a velocity–time graph.

The gradient equals −ω2-\omega^2−ω2. For example, a gradient of −100 s−2-100\,\mathrm{s^{-2}}−100s−2 gives ω=10 rad s−1\omega=10\,\mathrm{rad\,s^{-1}}ω=10rads−1. The period is then T=2πω≈0.63 sT=\frac{2\pi}{\omega}\approx0.63\,\mathrm{s}T=ω2π​≈0.63s. A curved line, or a line missing the origin, shows the motion is not simple harmonic.

Exam tip

Draw a large gradient triangle and state the unit of the gradient, s−2\mathrm{s^{-2}}s−2.

Note read

Check your recall[16 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the two conditions that must be met for motion to be simple harmonic.

    Show mark schemeHide mark scheme

    Model answer

    The acceleration is proportional to the displacement from equilibrium, and it is directed towards equilibrium.

    • 1 mark for stating that acceleration is proportional to displacement
    • 1 mark for stating that acceleration is directed towards equilibrium (opposite to displacement)
  2. 2.Describe[3 marks]

    Describe how the velocity and acceleration of an object in SHM change as it moves from maximum displacement to the equilibrium position.

    Show mark schemeHide mark scheme

    Model answer

    The velocity increases from zero to its maximum value at equilibrium. The acceleration decreases from its maximum to zero. The acceleration is directed towards equilibrium throughout.

    • 1 mark for stating that velocity increases from zero to a maximum
    • 1 mark for stating that acceleration decreases from a maximum to zero
    • 1 mark for stating that the acceleration is directed towards equilibrium throughout
  3. 3.Calculate[3 marks]

    An object oscillates with a frequency of 2.5 Hz and an amplitude of 0.12 m. Calculate its maximum speed.

    Show mark schemeHide mark scheme

    Model answer

    ω=2πf=2π×2.5=15.7 rad s−1\omega=2\pi f=2\pi\times2.5=15.7\,\mathrm{rad\,s^{-1}}ω=2πf=2π×2.5=15.7rads−1. Then vmax=ωA=15.7×0.12=1.9 m s−1v_\mathrm{max}=\omega A=15.7\times0.12=1.9\,\mathrm{m\,s^{-1}}vmax​=ωA=15.7×0.12=1.9ms−1.

    • 1 mark for using ω=2πf\omega=2\pi fω=2πf to find ω=15.7 rad s−1\omega=15.7\,\mathrm{rad\,s^{-1}}ω=15.7rads−1
    • 1 mark for using vmax=ωAv_\mathrm{max}=\omega Avmax​=ωA
    • 1 mark for obtaining 1.9 m s−11.9\,\mathrm{m\,s^{-1}}1.9ms−1
  4. 4.Calculate[3 marks]

    An oscillation has amplitude 0.050 m and ω=8.0 rad s−1\omega=8.0\,\mathrm{rad\,s^{-1}}ω=8.0rads−1. Calculate the speed at a displacement of 0.030 m.

    Show mark schemeHide mark scheme

    Model answer

    v=ωA2−x2=8.0×0.0502−0.0302=8.0×0.040=0.32 m s−1v=\omega\sqrt{A^2-x^2}=8.0\times\sqrt{0.050^2-0.030^2}=8.0\times0.040=0.32\,\mathrm{m\,s^{-1}}v=ωA2−x2​=8.0×0.0502−0.0302​=8.0×0.040=0.32ms−1.

    • 1 mark for using v=±ωA2−x2v=\pm\omega\sqrt{A^2-x^2}v=±ωA2−x2​
    • 1 mark for evaluating the square root as 0.040 m
    • 1 mark for obtaining 0.32 m s−10.32\,\mathrm{m\,s^{-1}}0.32ms−1
  5. 5.Explain[2 marks]

    Explain what happens to the period of an SHM oscillation if its amplitude is doubled.

    Show mark schemeHide mark scheme

    Model answer

    The period is unchanged. In SHM the period is 2πω\frac{2\pi}{\omega}ω2π​, which depends on the system and not on the amplitude.

    • 1 mark for stating that the period stays the same
    • 1 mark for explaining that T=2πωT=\frac{2\pi}{\omega}T=ω2π​ does not depend on the amplitude
  6. 6.Describe[3 marks]

    Describe how a graph of acceleration against displacement shows that motion is simple harmonic, and how it gives the angular frequency.

    Show mark schemeHide mark scheme

    Model answer

    The graph is a straight line through the origin with a negative gradient. The gradient equals −ω2-\omega^2−ω2, so ω\omegaω is the square root of the size of the gradient.

    • 1 mark for stating that the graph is a straight line through the origin
    • 1 mark for stating that the gradient is negative
    • 1 mark for stating that the gradient equals −ω2-\omega^2−ω2

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Calculate[1 mark]

An object in SHM has a period of 0.20 s. Calculate its frequency.
Show answer and explanation

Answer: B · Worked explanation

Frequency is the reciprocal of period, so f=1T=10.20 s=5.0 Hzf=\frac{1}{T}=\frac{1}{0.20\,\mathrm{s}}=5.0\,\mathrm{Hz}f=T1​=0.20s1​=5.0Hz. The value 31 comes from 2πT\frac{2\pi}{T}T2π​, which is the angular frequency ω\omegaω in rad s−1\mathrm{rad\,s^{-1}}rads−1, not the frequency. Use f=1Tf=\frac{1}{T}f=T1​ for frequency and ω=2πT\omega=\frac{2\pi}{T}ω=T2π​ for angular frequency, and do not mix them up.
4.

Medium·Calculate[1 mark]

An oscillator has amplitude 0.020 m and ω=15 rad s−1\omega=15\,\mathrm{rad\,s^{-1}}ω=15rads−1. Calculate its maximum acceleration.
Show answer and explanation

Answer: D · Worked explanation

Maximum acceleration is amax=ω2A=152×0.020=4.5 m s−2a_\mathrm{max}=\omega^2A=15^2\times0.020=4.5\,\mathrm{m\,s^{-2}}amax​=ω2A=152×0.020=4.5ms−2. The value 0.30 is ωA\omega AωA, which is the maximum speed in m s−1\mathrm{m\,s^{-1}}ms−1, not the maximum acceleration. The value 0.0060 comes from ωA2\omega A^2ωA2, and the value 0.0013 comes from dividing AAA by ω\omegaω. Neither gives an acceleration.
5.

Medium·Calculate[1 mark]

An object oscillates with a frequency of 4.0 Hz and an amplitude of 0.030 m. Calculate its maximum speed.
Show answer and explanation

Answer: A · Worked explanation

First ω=2πf=2π×4.0=25.1 rad s−1\omega=2\pi f=2\pi\times4.0=25.1\,\mathrm{rad\,s^{-1}}ω=2πf=2π×4.0=25.1rads−1. Then vmax=ωA=25.1×0.030=0.75 m s−1v_\mathrm{max}=\omega A=25.1\times0.030=0.75\,\mathrm{m\,s^{-1}}vmax​=ωA=25.1×0.030=0.75ms−1. The value 0.12 comes from multiplying frequency by amplitude and leaving out the factor of 2π2\pi2π. Check the units: 2πf2\pi f2πf is in rad s−1\mathrm{rad\,s^{-1}}rads−1, and multiplying by metres gives m s−1\mathrm{m\,s^{-1}}ms−1. The value 19 is ω2A\omega^2Aω2A, an acceleration.
6.

Medium·Identify[2 marks]

An object in SHM is at its positive maximum displacement. Identify its velocity and acceleration at that instant.
Show answer and explanation

Answer: C · Worked explanation

At the extreme the object stops briefly, so the velocity is zero. The acceleration a=−ω2xa=-\omega^2xa=−ω2x has its largest size there and is negative, which is towards equilibrium. Zero acceleration belongs to the equilibrium position, where the speed is greatest. The reverse situation, with the object at equilibrium, has maximum speed and zero acceleration.
7.

Medium·Predict[2 marks]

Predict the effect on the period and the maximum speed of doubling the amplitude of the same SHM system.
Show answer and explanation

Answer: B · Worked explanation

The period is 2πω\frac{2\pi}{\omega}ω2π​, which does not contain the amplitude, so it is unchanged. The maximum speed is vmax=ωAv_\mathrm{max}=\omega Avmax​=ωA, so doubling AAA doubles it. A larger swing takes the same time because it moves faster. A larger swing covers a greater distance in the same time, so it must move faster.
8.

Hard·Calculate[2 marks]

An oscillator has amplitude 0.040 m and ω=10 rad s−1\omega=10\,\mathrm{rad\,s^{-1}}ω=10rads−1. Calculate its speed when the displacement is 0.024 m.
Show answer and explanation

Answer: C · Worked explanation

Use v=ωA2−x2=10×0.0402−0.0242=10×0.001024=10×0.032=0.32 m s−1v=\omega\sqrt{A^2-x^2}=10\times\sqrt{0.040^2-0.024^2}=10\times\sqrt{0.001024}=10\times0.032=0.32\,\mathrm{m\,s^{-1}}v=ωA2−x2​=10×0.0402−0.0242​=10×0.001024​=10×0.032=0.32ms−1. The value 0.40 is the maximum speed ωA\omega AωA, which applies only at equilibrium. Notice that 0.0242+0.0322=0.04020.024^2+0.032^2=0.040^20.0242+0.0322=0.0402, a quick check on the square root. The values 0.24 and 0.16 come from ωx\omega xωx and ω(A−x)\omega(A-x)ω(A−x), which are not the correct expression.
9.

Hard·Determine[2 marks]

An object in SHM has a period of 0.60 s. Determine its acceleration when its displacement is +0.030 m.
Show answer and explanation

Answer: A · Worked explanation

First ω=2π0.60 s=10.5 rad s−1\omega=\frac{2\pi}{0.60\,\mathrm{s}}=10.5\,\mathrm{rad\,s^{-1}}ω=0.60s2π​=10.5rads−1. Then a=−ω2x=−10.52×0.030=−3.3 m s−2a=-\omega^2x=-10.5^2\times0.030=-3.3\,\mathrm{m\,s^{-2}}a=−ω2x=−10.52×0.030=−3.3ms−2. The positive value ignores the minus sign, which shows the acceleration points back towards equilibrium for a positive displacement. The values 0.31 and 0.050 come from multiplying ω\omegaω by xxx and dividing xxx by TTT, neither of which is an acceleration.
10.

Hard·Determine[2 marks]

A graph of acceleration against displacement for an SHM system is a straight line through the origin with gradient −64 s−2-64\,\mathrm{s^{-2}}−64s−2. Determine the frequency.
Show answer and explanation

Answer: D · Worked explanation

The gradient is −ω2-\omega^2−ω2, so ω=64=8.0 rad s−1\omega=\sqrt{64}=8.0\,\mathrm{rad\,s^{-1}}ω=64​=8.0rads−1. Then f=ω2π=8.02π=1.3 Hzf=\frac{\omega}{2\pi}=\frac{8.0}{2\pi}=1.3\,\mathrm{Hz}f=2πω​=2π8.0​=1.3Hz. The value 8.0 is the angular frequency in rad s−1\mathrm{rad\,s^{-1}}rads−1. The value 10 comes from dividing the gradient by 2π2\pi2π without taking a square root. The value 64 is the size of the gradient, which equals ω2\omega^2ω2 and not a frequency.

Keep going

Next topic3.6.1.3 Simple harmonic systemsPrevious topic3.6.1.1 Circular motion

More in Section 3.6 · Further mechanics and thermal physics

  1. 3.6.1.1Circular motionNotes · 10 questions
  2. 3.6.1.2Simple harmonic motionNotes · 10 questions
  3. 3.6.1.3Simple harmonic systemsNotes · 10 questions
  4. 3.6.1.4Forced vibrations and resonanceNotes · 10 questions
  5. 3.6.2.1Thermal energy transferNotes · 10 questions
  6. 3.6.2.2Ideal gasesNotes · 10 questions
  7. 3.6.2.3Kinetic theory modelNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1Simple harmonic motion has a restoring acceleration
  2. 2Amplitude, period and frequency describe each oscillation
  3. 3Equations give displacement, velocity and acceleration at any time
  4. 4Displacement, velocity and acceleration graphs are shifted versions of one curve
  5. 5A straight-line graph of acceleration against displacement identifies SHM
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

SHM graphs against time

Value divided by its maximum (no units)0123456-1-0.500.51ωt (rad)
  • Displacement x
  • Velocity v
  • Acceleration a