Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.6 Further mechanics and thermal physics
  4. ›3.6.2.3 Kinetic theory model

AQA A-level Physics · Section 3.6 · Further mechanics and thermal physics

3.6.2.3 Kinetic theory model

Describe the kinetic theory model of a gas, explain how pressure arises, and use the kinetic theory equation to link pressure, temperature and molecular speed.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Kinetic theory models a gas as many randomly moving particles
  1. 1Kinetic theory models a gas as many randomly moving particles
  2. 2Pressure arises from particles rebounding off the walls
  3. 3The mean square speed links pressure to particle motion
  4. 4Temperature indicates the average kinetic energy of the particles
  5. 5Typical speeds depend on temperature and particle mass
  6. 6Pressure follows from density and the mean square speed
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Kinetic theory models a gas as many randomly moving particles

A balloon holds an enormous number of gas particles. Following each one is impossible. The kinetic theory model describes the whole gas using a few assumptions and Newton’s laws.

The model treats the gas as an ideal gas with these features:

  • A very large number of identical particles, each of mass mmm.
  • Random motion in all directions, with a range of speeds.
  • Particle volume that is negligible compared with the container.
  • No forces between particles except during collisions.
  • Elastic collisions that last a negligible time.

Common mistake

Particles do not all move at the same speed. The model works with an average, because individual speeds vary.

Key terms · tap one for its definition

kinetic theory

Kinetic theory explains the behaviour of a gas by applying Newton’s laws to the motion of its particles.

ideal gas

An ideal gas is a model whose particles have negligible volume and interact only through elastic collisions.

Part 1 done

2

Part 2 of 6: Pressure arises from particles rebounding off the walls

Picture one particle of mass mmm travelling at right angles towards a wall at speed ccc. It rebounds elastically, so it leaves at speed ccc in the opposite direction. Its momentum changes by 2mc2mc2mc.

The wall exerts a force on the particle to cause this change. By Newton’s third law, the particle exerts an equal and opposite force on the wall. This force equals the rate of change of momentum.

Figure 1. A particle hits the wall at right angles and rebounds at the same speed, so its momentum changes by 2mc.

A gas has countless particles, so collisions occur constantly and the force is steady. The pressure on the wall is this force divided by the wall’s area. More particles, or faster ones, give a larger pressure.

Key term

pressure

Pressure ppp is the normal force per unit area, measured in pascals, where 1 Pa=1 N m−21\,\mathrm{Pa}=1\,\mathrm{N\,m^{-2}}1Pa=1Nm−2.

Part 2 done

Quick check

One question on the part you just read

Easy

Name the quantity c2‾\sqrt{\overline{c^2}}c2​.
Show answer and explanation

Answer: C · Worked explanation

The square root of the mean square speed c2‾\overline{c^2}c2 is the root mean square speed, written crmsc_\mathrm{rms}crms​. It is not the same as the mean speed, which averages the speeds without squaring. The quantity c2‾\overline{c^2}c2 itself is the mean square speed, so taking the square root changes both its name and its unit. Check the unit of any speed-related answer before choosing.
3

Part 3 of 6: The mean square speed links pressure to particle motion

Real particles have different speeds, so the equation needs an average. Square every speed and take the mean. Squaring means the fastest particles count for more than the slowest. This gives the mean square speed, c2‾\overline{c^2}c2. Its square root is the root mean square speed, crmsc_\mathrm{rms}crms​.

For NNN particles, each of mass mmm, in a volume VVV, the kinetic theory equation is pV=13Nmc2‾pV=\frac{1}{3}Nm\overline{c^2}pV=31​Nmc2. The factor 13\frac{1}{3}31​ appears because the motion is shared equally between three directions.

The density is ρ=NmV\rho=\frac{Nm}{V}ρ=VNm​. The equation can therefore be written p=13ρc2‾p=\frac{1}{3}\rho\overline{c^2}p=31​ρc2. Use this form when the density is known but the number of particles is not.

Key terms · tap one for its definition

mean square speed

The mean square speed c2‾\overline{c^2}c2 is the mean of the squares of the particle speeds, measured in m2 s−2\mathrm{m^2\,s^{-2}}m2s−2.

root mean square speed

The root mean square speed crmsc_\mathrm{rms}crms​ is the square root of the mean square speed, measured in m s−1\mathrm{m\,s^{-1}}ms−1.

Part 3 done

4

Part 4 of 6: Temperature indicates the average kinetic energy of the particles

Now relate the equation to the temperature of the gas. An ideal gas also obeys pV=NkTpV=NkTpV=NkT, where kkk is the Boltzmann constant. Equating the two expressions for pVpVpV gives 13Nmc2‾=NkT\frac{1}{3}Nm\overline{c^2}=NkT31​Nmc2=NkT.

Cancelling NNN and multiplying by 32\frac{3}{2}23​ gives 12mc2‾=32kT\frac{1}{2}m\overline{c^2}=\frac{3}{2}kT21​mc2=23​kT. The left side is the mean kinetic energy of one particle.

So the mean kinetic energy depends only on the temperature TTT in kelvin. Doubling TTT doubles the mean kinetic energy of the particles.

Exam tip

Say mean or average kinetic energy. Individual particles can have much more or much less energy.

Key terms · tap one for its definition

temperature

Temperature indicates the average kinetic energy of particles in a substance.

Boltzmann constant

The Boltzmann constant kkk is the molar gas constant divided by the Avogadro constant, 1.38×10−23 J K−11.38\times10^{-23}\,\mathrm{J\,K^{-1}}1.38×10−23JK−1.

kinetic energy

Kinetic energy is the energy an object has due to its motion.

Part 4 done

Quick check

One question on the part you just read

Easy

State which assumption belongs to the kinetic theory model of a gas.
Show answer and explanation

Answer: A · Worked explanation

The model assumes that particles exert no forces on each other except when they collide. Particles move with a range of speeds, not one speed. Collisions are elastic, so no kinetic energy is lost at the walls. Between collisions the particles travel in straight lines at constant speed, so they are not stationary.
5

Part 5 of 6: Typical speeds depend on temperature and particle mass

Rearranging 12mc2‾=32kT\frac{1}{2}m\overline{c^2}=\frac{3}{2}kT21​mc2=23​kT gives crms=3kTmc_\mathrm{rms}=\sqrt{\frac{3kT}{m}}crms​=m3kT​​. At one temperature, a light particle moves faster than a heavy one. Because crmsc_\mathrm{rms}crms​ is proportional to T\sqrt{T}T​, quadrupling the kelvin temperature only doubles the speed. Helium atoms, for example, are much lighter than nitrogen molecules, so they move much faster at the same temperature.

Worked example

Speed of a nitrogen molecule

A nitrogen molecule has mass 4.7×10−26 kg4.7\times10^{-26}\,\mathrm{kg}4.7×10−26kg. Calculate its root mean square speed at 300 K300\,\mathrm{K}300K. Use k=1.38×10−23 J K−1k=1.38\times10^{-23}\,\mathrm{J\,K^{-1}}k=1.38×10−23JK−1.
  1. 1
    Use crms=3kTmc_\mathrm{rms}=\sqrt{\frac{3kT}{m}}crms​=m3kT​​.
  2. 2
    Substitute: crms=3×(1.38×10−23 J K−1)×(300 K)4.7×10−26 kgc_\mathrm{rms}=\sqrt{\frac{3\times(1.38\times10^{-23}\,\mathrm{J\,K^{-1}})\times(300\,\mathrm{K})}{4.7\times10^{-26}\,\mathrm{kg}}}crms​=4.7×10−26kg3×(1.38×10−23JK−1)×(300K)​​.
  3. 3
    Evaluate the fraction: 1.242×10−204.7×10−26=2.64×105 m2 s−2\frac{1.242\times10^{-20}}{4.7\times10^{-26}}=2.64\times10^{5}\,\mathrm{m^2\,s^{-2}}4.7×10−261.242×10−20​=2.64×105m2s−2.
  4. 4
    Take the square root: crms=2.64×105≈514 m s−1c_\mathrm{rms}=\sqrt{2.64\times10^{5}}\approx514\,\mathrm{m\,s^{-1}}crms​=2.64×105​≈514ms−1.

Answer: The root mean square speed is crms≈5.1×102 m s−1c_\mathrm{rms}\approx5.1\times10^{2}\,\mathrm{m\,s^{-1}}crms​≈5.1×102ms−1.

A speed of several hundred metres per second does not mean the gas drifts that fast. Particles collide so often that they change direction constantly. The gas as a whole can stay still. Taking direction into account, the average velocity of all the particles is close to zero.

Part 5 done

6

Part 6 of 6: Pressure follows from density and the mean square speed

Sometimes the density of a gas is given instead of the number of particles. Use p=13ρc2‾p=\frac{1}{3}\rho\overline{c^2}p=31​ρc2 and remember that c2‾=crms2\overline{c^2}=c_\mathrm{rms}^{2}c2=crms2​.

Worked example

Pressure of a gas

A gas has density 1.2 kg m−31.2\,\mathrm{kg\,m^{-3}}1.2kgm−3 and root mean square speed 5.0×102 m s−15.0\times10^{2}\,\mathrm{m\,s^{-1}}5.0×102ms−1. Calculate its pressure.
  1. 1
    Use p=13ρc2‾p=\frac{1}{3}\rho\overline{c^2}p=31​ρc2.
  2. 2
    Square the speed: c2‾=(5.0×102 m s−1)2=2.5×105 m2 s−2\overline{c^2}=(5.0\times10^{2}\,\mathrm{m\,s^{-1}})^2=2.5\times10^{5}\,\mathrm{m^2\,s^{-2}}c2=(5.0×102ms−1)2=2.5×105m2s−2.
  3. 3
    Substitute: p=13×(1.2 kg m−3)×(2.5×105 m2 s−2)p=\frac{1}{3}\times(1.2\,\mathrm{kg\,m^{-3}})\times(2.5\times10^{5}\,\mathrm{m^2\,s^{-2}})p=31​×(1.2kgm−3)×(2.5×105m2s−2).

Answer: The pressure is p=1.0×105 Pap=1.0\times10^{5}\,\mathrm{Pa}p=1.0×105Pa.

Heating a gas in a rigid container raises crmsc_\mathrm{rms}crms​. Collisions with the walls become harder and more frequent, so ppp rises. This agrees with the relationship that ppp is proportional to TTT at constant volume. Equally, at constant temperature, compressing the gas raises ρ\rhoρ, so the pressure rises too.

Exam tip

Square the root mean square speed before substituting. Forgetting to square it is a very common error.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe the main assumptions of the kinetic theory model of a gas.

    Show mark schemeHide mark scheme

    Model answer

    A gas contains a very large number of identical particles moving randomly. The particle volume is negligible and there are no forces except during collisions. Collisions are elastic and last a negligible time.

    • 1 mark for stating that there are many identical particles in random motion
    • 1 mark for stating that particle volume is negligible and there are no forces except during collisions
    • 1 mark for stating that collisions are elastic and last a negligible time
  2. 2.Explain[3 marks]

    Explain how particles in a gas produce a pressure on the walls of their container.

    Show mark schemeHide mark scheme

    Model answer

    Particles rebound from the wall, so their momentum changes. The wall exerts a force equal to the rate of change of momentum. Countless collisions give a steady force, and pressure is this force per unit area.

    • 1 mark for stating that particles rebound and change momentum
    • 1 mark for stating that force equals the rate of change of momentum
    • 1 mark for stating that many collisions give a steady force divided by the wall area
  3. 3.State[2 marks]

    State the relationship between the mean kinetic energy of a gas particle and its temperature in kelvin.

    Show mark schemeHide mark scheme

    Model answer

    The mean kinetic energy is proportional to the kelvin temperature, with 12mc2‾=32kT\frac{1}{2}m\overline{c^2}=\frac{3}{2}kT21​mc2=23​kT.

    • 1 mark for stating that mean kinetic energy is proportional to the temperature in kelvin
    • 1 mark for giving 12mc2‾=32kT\frac{1}{2}m\overline{c^2}=\frac{3}{2}kT21​mc2=23​kT
  4. 4.Calculate[3 marks]

    Calculate the root mean square speed of helium atoms of mass 6.6×10−27 kg6.6\times10^{-27}\,\mathrm{kg}6.6×10−27kg at 300 K300\,\mathrm{K}300K. Use k=1.38×10−23 J K−1k=1.38\times10^{-23}\,\mathrm{J\,K^{-1}}k=1.38×10−23JK−1.

    Show mark schemeHide mark scheme

    Model answer

    crms=3kTm=3×1.38×10−23×3006.6×10−27≈1.4×103 m s−1c_\mathrm{rms}=\sqrt{\frac{3kT}{m}}=\sqrt{\frac{3\times1.38\times10^{-23}\times300}{6.6\times10^{-27}}}\approx1.4\times10^{3}\,\mathrm{m\,s^{-1}}crms​=m3kT​​=6.6×10−273×1.38×10−23×300​​≈1.4×103ms−1.

    • 1 mark for using crms=3kTmc_\mathrm{rms}=\sqrt{\frac{3kT}{m}}crms​=m3kT​​
    • 1 mark for substituting the values correctly
    • 1 mark for obtaining 1.4×103 m s−11.4\times10^{3}\,\mathrm{m\,s^{-1}}1.4×103ms−1
  5. 5.Suggest[3 marks]

    Suggest how the root mean square speed and the pressure change when the kelvin temperature of a fixed mass of gas in a rigid container is quadrupled.

    Show mark schemeHide mark scheme

    Model answer

    The root mean square speed doubles, because it is proportional to the square root of the temperature. The mean square speed therefore quadruples. The pressure quadruples, because it is proportional to the mean square speed at constant volume.

    • 1 mark for stating that the root mean square speed doubles
    • 1 mark for stating that the mean square speed quadruples
    • 1 mark for stating that the pressure quadruples

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Give[1 mark]

Give the unit of the mean square speed c2‾\overline{c^2}c2.
Show answer and explanation

Answer: D · Worked explanation

Speed has the unit m s−1\mathrm{m\,s^{-1}}ms−1. Squaring each speed squares the unit as well, giving m2 s−2\mathrm{m^2\,s^{-2}}m2s−2. The unit m s−1\mathrm{m\,s^{-1}}ms−1 belongs to the root mean square speed, which is the square root of this quantity. The unit m s−2\mathrm{m\,s^{-2}}ms−2 belongs to acceleration, which is a different quantity.
4.

Medium·Calculate[2 marks]

A gas has density 0.90 kg m−30.90\,\mathrm{kg\,m^{-3}}0.90kgm−3 and root mean square speed 1.2×103 m s−11.2\times10^{3}\,\mathrm{m\,s^{-1}}1.2×103ms−1. Calculate its pressure.
Show answer and explanation

Answer: B · Worked explanation

p=13ρc2‾=13×0.90×(1.2×103)2=13×0.90×1.44×106≈4.3×105 Pap=\frac{1}{3}\rho\overline{c^2}=\frac{1}{3}\times0.90\times(1.2\times10^{3})^2=\frac{1}{3}\times0.90\times1.44\times10^{6}\approx4.3\times10^{5}\,\mathrm{Pa}p=31​ρc2=31​×0.90×(1.2×103)2=31​×0.90×1.44×106≈4.3×105Pa. The value 3.6×102 Pa3.6\times10^{2}\,\mathrm{Pa}3.6×102Pa comes from forgetting to square the speed. The value 1.3×106 Pa1.3\times10^{6}\,\mathrm{Pa}1.3×106Pa comes from leaving out the factor of one third. The value 6.5×105 Pa6.5\times10^{5}\,\mathrm{Pa}6.5×105Pa comes from using one half, which belongs to the kinetic energy expression instead. Always check that the speed is squared and the factor is one third.
5.

Medium·Calculate[2 marks]

Calculate the mean kinetic energy of a gas particle at 300 K300\,\mathrm{K}300K. Use k=1.38×10−23 J K−1k=1.38\times10^{-23}\,\mathrm{J\,K^{-1}}k=1.38×10−23JK−1.
Show answer and explanation

Answer: A · Worked explanation

The mean kinetic energy is 32kT=1.5×(1.38×10−23 J K−1)×(300 K)≈6.2×10−21 J\frac{3}{2}kT=1.5\times(1.38\times10^{-23}\,\mathrm{J\,K^{-1}})\times(300\,\mathrm{K})\approx6.2\times10^{-21}\,\mathrm{J}23​kT=1.5×(1.38×10−23JK−1)×(300K)≈6.2×10−21J. The value 4.1×10−21 J4.1\times10^{-21}\,\mathrm{J}4.1×10−21J is kTkTkT, which omits the factor of 32\frac{3}{2}23​. The value 5.6×10−22 J5.6\times10^{-22}\,\mathrm{J}5.6×10−22J comes from using 27 instead of the kelvin temperature. The value 1.2×10−20 J1.2\times10^{-20}\,\mathrm{J}1.2×10−20J comes from using a factor of 3 instead of 32\frac{3}{2}23​. Remember that temperatures in these formulae must always be in kelvin.
6.

Medium·Calculate[1 mark]

A fixed mass of gas in a rigid container is heated from 300 K300\,\mathrm{K}300K to 1200 K1200\,\mathrm{K}1200K. Calculate the factor by which crmsc_\mathrm{rms}crms​ changes.
Show answer and explanation

Answer: C · Worked explanation

Since crmsc_\mathrm{rms}crms​ is proportional to T\sqrt{T}T​, and the temperature rises by a factor of 4, the speed rises by a factor of 4=2\sqrt{4}=24​=2. A factor of 4 is the change in mean kinetic energy, which is proportional to TTT itself. Heating does change the speed, even though the volume stays constant.
7.

Medium·Explain[1 mark]

Explain why helium atoms move faster than nitrogen molecules at the same temperature.
Show answer and explanation

Answer: D · Worked explanation

At one temperature, every ideal gas has the same mean kinetic energy 32kT\frac{3}{2}kT23​kT. Since kinetic energy is 12mc2\frac{1}{2}mc^221​mc2, a particle of smaller mass needs a greater speed to have the same energy. The mean kinetic energy is not larger for helium, because it depends only on temperature.
8.

Hard·Suggest[2 marks]

A fixed mass of ideal gas is compressed to half its volume at constant temperature. Suggest what happens to the root mean square speed and to the pressure.
Show answer and explanation

Answer: A · Worked explanation

The temperature is constant, so the mean kinetic energy and crmsc_\mathrm{rms}crms​ are unchanged. Halving the volume doubles the density, and p=13ρc2‾p=\frac{1}{3}\rho\overline{c^2}p=31​ρc2 then doubles the pressure. The particles hit the walls more often, not harder. The idea that compression raises the speed confuses compression with heating.
9.

Hard·Compare[2 marks]

Gas X has particles of mass mmm and gas Y has particles of mass 4m4m4m. Both gases are at the same temperature. Compare the root mean square speed of X with that of Y.
Show answer and explanation

Answer: B · Worked explanation

The mean kinetic energy is equal, so 12mc2‾\frac{1}{2}m\overline{c^2}21​mc2 is the same for both. This means c2‾\overline{c^2}c2 is inversely proportional to mass, and crmsc_\mathrm{rms}crms​ is inversely proportional to m\sqrt{m}m​. A mass ratio of 4 gives a speed ratio of 2. The ratio of 4 forgets to take the square root.
10.

Hard·Calculate[2 marks]

Particles of mass 5.0×10−26 kg5.0\times10^{-26}\,\mathrm{kg}5.0×10−26kg have a root mean square speed of 4.0×102 m s−14.0\times10^{2}\,\mathrm{m\,s^{-1}}4.0×102ms−1. Calculate the temperature of the gas. Use k=1.38×10−23 J K−1k=1.38\times10^{-23}\,\mathrm{J\,K^{-1}}k=1.38×10−23JK−1.
Show answer and explanation

Answer: D · Worked explanation

From 12mc2‾=32kT\frac{1}{2}m\overline{c^2}=\frac{3}{2}kT21​mc2=23​kT, T=mc2‾3k=5.0×10−26×(4.0×102)23×1.38×10−23≈1.9×102 KT=\frac{m\overline{c^2}}{3k}=\frac{5.0\times10^{-26}\times(4.0\times10^{2})^2}{3\times1.38\times10^{-23}}\approx1.9\times10^{2}\,\mathrm{K}T=3kmc2​=3×1.38×10−235.0×10−26×(4.0×102)2​≈1.9×102K. The value 2.9×102 K2.9\times10^{2}\,\mathrm{K}2.9×102K treats the mean kinetic energy as kTkTkT. The value 0.48 K0.48\,\mathrm{K}0.48K comes from using the speed without squaring it. The value 5.8×102 K5.8\times10^{2}\,\mathrm{K}5.8×102K comes from leaving out the factor of 3 in the denominator. Check that the speed is squared before you substitute, and that the answer is a sensible temperature.

Keep going

Next topic3.7.1 FieldsPrevious topic3.6.2.2 Ideal gases

More in Section 3.6 · Further mechanics and thermal physics

  1. 3.6.1.1Circular motionNotes · 10 questions
  2. 3.6.1.2Simple harmonic motionNotes · 10 questions
  3. 3.6.1.3Simple harmonic systemsNotes · 10 questions
  4. 3.6.1.4Forced vibrations and resonanceNotes · 10 questions
  5. 3.6.2.1Thermal energy transferNotes · 10 questions
  6. 3.6.2.2Ideal gasesNotes · 10 questions
  7. 3.6.2.3Kinetic theory modelNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1Kinetic theory models a gas as many randomly moving particles
  2. 2Pressure arises from particles rebounding off the walls
  3. 3The mean square speed links pressure to particle motion
  4. 4Temperature indicates the average kinetic energy of the particles
  5. 5Typical speeds depend on temperature and particle mass
  6. 6Pressure follows from density and the mean square speed
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe