AQA A-level Physics · Section 3.6 · Further mechanics and thermal physics
3.6.2.1 Thermal energy transfer
Describe conduction, convection and radiation, explain how insulation reduces energy transfer, and use thermal conductivity to compare materials.
1/6Energy always flows from hotter regions to cooler ones
- Energy always flows from hotter regions to cooler ones
- Conduction passes energy between neighbouring particles
- Convection moves energy in fluids and radiation needs no material
- Insulation works by blocking all three processes
- Thermal conductivity measures how easily a material conducts energy
- Comparing conductivities shows which material transfers energy faster
- Check your recall
- Practice: 10 questions
Part 1 of 6: Energy always flows from hotter regions to cooler ones
A hot drink left on a table slowly cools. Energy leaves the drink until it reaches the temperature of the room. This one-way movement of energy because of a temperature difference is called thermal energy transfer.
Three different processes can carry the energy, and often all three act together. A larger temperature difference makes the transfer faster. Each process is taken in turn below.
Key term
thermal energy transfer
Thermal energy transfer is the net movement of energy from a region at higher temperature to one at lower temperature, measured in joules.
Part 2 of 6: Conduction passes energy between neighbouring particles
Leave a metal spoon in hot tea and the handle soon warms up. Particles at the hot end vibrate more strongly. They pass energy to their neighbours, which pass it on in turn. This process is conduction.
Metals conduct especially well because they contain free electrons. These electrons move through the whole metal and carry energy quickly from hot regions to cooler ones. Non-metals rely mainly on vibrating particles, so they conduct less well.
Energy passes along the spoon, but the material itself does not move. Gases conduct very poorly, because their particles are far apart.
Key terms · tap one for its definition
conduction
Conduction transfers energy through a material without bulk movement of the material.
free electrons
Free electrons are electrons in a metal that are not bound to one atom and can move through the whole metal.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 3 of 6: Convection moves energy in fluids and radiation needs no material
Now consider a pan of water on a hob. Water at the bottom warms, expands and becomes less dense. It rises while cooler, denser water sinks to take its place. This circulation is convection, and it works only in a fluid, meaning a liquid or a gas.
The Sun warms the Earth across empty space, so another process must exist. All objects emit thermal radiation, which consists of infrared electromagnetic waves. It needs no material to travel through. Hotter objects emit more, and dark, rough surfaces emit and absorb it better than shiny ones.
The three processes compared
- Process
- Conduction
- Material needed
- Yes, mostly solids
- How energy moves
- Particle vibrations and free electrons
- Process
- Convection
- Material needed
- Yes, a fluid
- How energy moves
- Bulk movement of warm fluid
- Process
- Radiation
- Material needed
- No
- How energy moves
- Infrared electromagnetic waves
Key terms · tap one for its definition
convection
Convection transfers energy through the bulk movement of a fluid.
thermal radiation
Thermal radiation is energy transferred by infrared electromagnetic waves, emitted by every object because of its temperature.
Part 4 of 6: Insulation works by blocking all three processes
Now consider keeping a drink warm. Insulation slows all three processes, so less energy escapes. Trapped air is a poor conductor, and it cannot circulate freely when held in tiny pockets.
A vacuum flask shows each method at work.
- A vacuum between the walls stops conduction and convection.
- Silvered surfaces reflect thermal radiation back towards the drink.
- A tight stopper stops warm air escaping by convection.
Wool, foam and loft insulation use trapped air in the same way. Their fibres or bubbles hold the air still, so little energy is conducted or carried by convection.
Key term
insulation
Insulation is a material or design feature that reduces the rate of thermal energy transfer, often by trapping air.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 5 of 6: Thermal conductivity measures how easily a material conducts energy
A copper pan heats quickly, but a foam cup stays comfortable to hold. The difference lies in the material. Each material has a thermal conductivity, , which is high for good conductors and low for insulators.
Take a flat slab of area and thickness , with a temperature difference between its faces. The temperature gradient is .
The rate of energy transfer by conduction is , where is the energy transferred in time .
- Doubling the area doubles the rate.
- Doubling the thickness halves the rate.
- Doubling the temperature difference doubles the rate.
Key term
thermal conductivity
The thermal conductivity of a material is the rate of energy transfer per unit area per unit temperature gradient, measured in .
Part 6 of 6: Comparing conductivities shows which material transfers energy faster
Now put numbers into the equation. A larger conductivity gives a faster transfer when everything else is equal.
Worked example
Energy transfer through a glass pane
- Word equation: rate = conductivity area temperature difference divided by thickness.
- Symbol equation: .
- Convert the thickness: .
- Substitute: .
Answer: The rate of energy transfer is .
Suppose the glass is replaced by a material with , of the same size and with the same temperature difference. Its conductivity is 25 times smaller, so the rate falls by a factor of 25 to about . Comparing values therefore compares materials of equal size under equal conditions.
Check your recall[15 marks]
5 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Describe[3 marks]
Describe how energy is transferred through a metal rod by conduction.
Show mark schemeHide mark scheme
Model answer
Particles at the hot end vibrate more strongly and pass energy to neighbouring particles. Free electrons also move through the metal and carry energy. The rod itself does not move as a whole.
- 1 mark for stating that vibrating particles pass energy to neighbouring particles
- 1 mark for stating that free electrons move through the metal and carry energy
- 1 mark for stating that there is no bulk movement of the material
- 2.Explain[3 marks]
Explain how a convection current forms in a pan of water heated from below.
Show mark schemeHide mark scheme
Model answer
Water at the bottom warms and expands, so it becomes less dense. It rises while cooler, denser water sinks to replace it. This circulation carries energy through the water.
- 1 mark for stating that warmed water expands and becomes less dense
- 1 mark for stating that it rises while cooler, denser water sinks
- 1 mark for stating that the circulating fluid carries energy
- 3.Compare[3 marks]
Compare conduction, convection and radiation in terms of whether they need a material.
Show mark schemeHide mark scheme
Model answer
Conduction needs a material, mostly a solid, with particles or free electrons passing energy on. Convection needs a fluid that can move in bulk. Radiation needs no material because infrared waves carry the energy.
- 1 mark for stating that conduction needs a material
- 1 mark for stating that convection needs a moving fluid
- 1 mark for stating that radiation needs no material
- 4.Suggest[3 marks]
Suggest why a double-glazed window with a sealed air gap transfers less energy than a single pane of the same glass.
Show mark schemeHide mark scheme
Model answer
Air has a lower thermal conductivity than glass, so conduction is reduced. The gap is thin, so the air cannot circulate and convection is small. The total thickness is greater, so the rate of transfer is lower.
- 1 mark for stating that air has a lower thermal conductivity than glass
- 1 mark for stating that the air is trapped so convection is small
- 1 mark for stating that the greater total thickness reduces the rate
- 5.Calculate[3 marks]
Calculate the rate of energy transfer through a wall of area and thickness . The thermal conductivity is and the temperature difference across the wall is .
Show mark schemeHide mark scheme
Model answer
.
- 1 mark for using
- 1 mark for substituting the values correctly
- 1 mark for obtaining

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyGive[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumCalculate[2 marks]
Show answer and explanation
Answer: D · Worked explanation
MediumExplain[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumExplain[1 mark]
Show answer and explanation
Answer: C · Worked explanation
Medium[1 mark]
Show answer and explanation
Answer: A · Worked explanation
HardCompare[2 marks]
Show answer and explanation
Answer: B · Worked explanation
HardExplain[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardCalculate[2 marks]
Show answer and explanation
Answer: C · Worked explanation