Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.6 Further mechanics and thermal physics
  4. ›3.6.1.1 Circular motion

AQA A-level Physics · Section 3.6 · Further mechanics and thermal physics

3.6.1.1 Circular motion

Describe uniform circular motion, and use angular speed, period and the centripetal equations to find speed, acceleration and force.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5An object moving in a circle is always accelerating
  1. 1An object moving in a circle is always accelerating
  2. 2Angular speed measures how fast the angle turns
  3. 3Period and frequency are linked to angular speed
  4. 4Centripetal acceleration always points to the centre
  5. 5Centripetal force is the resultant force towards the centre
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: An object moving in a circle is always accelerating

Swing a bag round on a string at a steady pace. Its speed stays the same, yet its velocity keeps changing. Velocity includes direction, so turning changes it even at constant speed. You can feel the string pulling inwards as you swing it.

A change in velocity is an acceleration. At each point the velocity points along the tangent, the straight line that just touches the circle there. The change in velocity points towards the centre, so the acceleration does too. This is true at every point on the circle.

Figure 1. The velocity is along the tangent at each point. The acceleration points towards the centre.

Common mistake

Constant speed does not mean zero acceleration. In circular motion the speed is constant, but the velocity is not.

Key terms · tap one for its definition

velocity

Velocity is the rate of change of displacement with time.

acceleration

Acceleration is the rate of change of velocity with time.

Part 1 done

2

Part 2 of 5: Angular speed measures how fast the angle turns

Now that direction matters, we need a way to describe how quickly an object turns. Angles are measured in radians. One radian is the angle at the centre when the arc length equals the radius. A full turn is 2π2\pi2π radians, which equals 360∘360^{\circ}360∘.

The angular speed, ω\omegaω, is the angle turned each second. If an object turns through Δθ\Delta\thetaΔθ in a time Δt\Delta tΔt, then ω=ΔθΔt\omega=\frac{\Delta\theta}{\Delta t}ω=ΔtΔθ​. Its unit is rad s−1\mathrm{rad\,s^{-1}}rads−1.

A point at radius rrr moves a distance rΔθr\Delta\thetarΔθ along the circle in that time. Its linear speed is therefore v=ωrv=\omega rv=ωr. Points further out move faster, but every point shares the same angular speed.

Key terms · tap one for its definition

radian

A radian is the angle subtended at the centre of a circle by an arc equal in length to the radius.

angular speed

Angular speed is the angle turned per unit time, measured in radians per second.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the direction of the acceleration of an object moving in a circle at constant speed.
Show answer and explanation

Answer: A · Worked explanation

The velocity changes direction towards the inside of the circle, so the acceleration points to the centre at every instant. An acceleration along the tangent would change the speed, which stays constant here. Constant speed does not mean zero acceleration, because velocity includes direction.
3

Part 3 of 5: Period and frequency are linked to angular speed

Angular speed also tells you how long one lap takes. The period, TTT, is the time for one complete revolution. The frequency, fff, is the number of revolutions each second, so f=1Tf=\frac{1}{T}f=T1​. A faster-spinning object has a shorter period and a higher frequency.

One revolution turns through 2π2\pi2π radians in a time TTT. Putting this into the definition of angular speed gives ω=2πT=2πf\omega=\frac{2\pi}{T}=2\pi fω=T2π​=2πf. Use the first form when you know the period and the second when you know the frequency.

Worked example

Speed of a fan blade tip

The tip of a fan blade is 0.15 m from the axis. The fan completes 8.0 revolutions each second. Calculate the angular speed and the speed of the tip.
  1. 1
    Angular speed equals 2π2\pi2π multiplied by frequency, so ω=2πf\omega=2\pi fω=2πf.
  2. 2
    Substitute: ω=2π×8.0 s−1=50.3 rad s−1\omega=2\pi\times8.0\,\mathrm{s^{-1}}=50.3\,\mathrm{rad\,s^{-1}}ω=2π×8.0s−1=50.3rads−1.
  3. 3
    Linear speed equals angular speed multiplied by radius, so v=ωrv=\omega rv=ωr.
  4. 4
    Substitute: v=50.3 rad s−1×0.15 m=7.54 m s−1v=50.3\,\mathrm{rad\,s^{-1}}\times0.15\,\mathrm{m}=7.54\,\mathrm{m\,s^{-1}}v=50.3rads−1×0.15m=7.54ms−1.

Answer: The angular speed is 50 rad s−150\,\mathrm{rad\,s^{-1}}50rads−1 and the tip speed is 7.5 m s−17.5\,\mathrm{m\,s^{-1}}7.5ms−1.

Exam tip

Divide a rate in revolutions each minute by 60 to get revolutions each second. Do this before using ω=2πf\omega=2\pi fω=2πf.

Key term

period

The time taken to complete one revolution.

Part 3 done

4

Part 4 of 5: Centripetal acceleration always points to the centre

The velocity change points inwards, so the acceleration can be found from speed and radius. This is the centripetal acceleration, directed towards the centre of the circle. Its size is a=v2ra=\frac{v^2}{r}a=rv2​.

Substituting v=ωrv=\omega rv=ωr gives an equivalent form, a=ω2ra=\omega^2 ra=ω2r. Choose whichever form matches the data you have. Either way, a faster object or a tighter circle gives a larger acceleration. Doubling the speed on the same circle multiplies it by four.

The acceleration is always at right angles to the velocity. It changes the direction of motion but not the speed. This is why the speed stays constant.

Key term

centripetal acceleration

Centripetal acceleration is the acceleration of an object moving in a circle, directed towards the centre, of magnitude v2r\frac{v^2}{r}rv2​.

Part 4 done

Quick check

One question on the part you just read

Easy

State the unit of angular speed.
Show answer and explanation

Answer: C · Worked explanation

Angular speed is the angle turned each second, so its unit is radians per second, rad s−1\mathrm{rad\,s^{-1}}rads−1. The unit m s−1\mathrm{m\,s^{-1}}ms−1 belongs to linear speed, which measures distance moved along the circle each second rather than angle turned. Writing the radian in the unit shows that the angle is measured in radians, not degrees.
5

Part 5 of 5: Centripetal force is the resultant force towards the centre

Any acceleration needs a resultant force. Applying F=maF=maF=ma to circular motion gives the centripetal force, the resultant force towards the centre. Its size is F=mv2r=mω2rF=\frac{mv^2}{r}=m\omega^2 rF=rmv2​=mω2r.

Centripetal force is not an extra force. It is the resultant of the real forces acting. Tension, friction or gravity can each provide it. For a car on a flat bend, friction does the job. For a ball on a string, the tension does.

Common mistake

There is no outward ‘centrifugal’ force acting on the object. If the inward force vanishes, the object moves off along the tangent.

Worked example

Car on a bend

A car of mass 1200 kg takes a level bend of radius 50 m at 15 m s−115\,\mathrm{m\,s^{-1}}15ms−1. Calculate the centripetal force and say what provides it.
  1. 1
    Centripetal force equals mass multiplied by speed squared, divided by radius: F=mv2rF=\frac{mv^2}{r}F=rmv2​.
  2. 2
    Substitute: F=1200 kg×(15 m s−1)250 mF=\frac{1200\,\mathrm{kg}\times(15\,\mathrm{m\,s^{-1}})^2}{50\,\mathrm{m}}F=50m1200kg×(15ms−1)2​.
  3. 3
    Evaluate: F=1200×22550 N=5400 NF=\frac{1200\times225}{50}\,\mathrm{N}=5400\,\mathrm{N}F=501200×225​N=5400N.

Answer: The centripetal force is 5.4×103 N5.4\times10^{3}\,\mathrm{N}5.4×103N, provided by friction between the tyres and the road.

Go deeperWhy the speed does not change

The centripetal force acts at right angles to the velocity. Work done is force multiplied by distance moved in the direction of the force, so this force does no work.

The kinetic energy therefore stays constant. A force component along the velocity would change the speed, and the motion would no longer be at constant speed.

Key term

centripetal force

Centripetal force is the resultant force directed towards the centre of a circular path.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[2 marks]

    Explain why an object moving in a circle at constant speed is accelerating.

    Show mark schemeHide mark scheme

    Model answer

    Its velocity changes because its direction of motion keeps changing. A change in velocity is an acceleration.

    • 1 mark for stating that the direction of motion, and so the velocity, is continuously changing
    • 1 mark for stating that a change in velocity is an acceleration
  2. 2.State[2 marks]

    State the equation linking angular speed ω\omegaω to the period TTT, and the equation linking linear speed vvv to ω\omegaω and radius rrr.

    Show mark schemeHide mark scheme

    Model answer

    ω=2πT\omega=\frac{2\pi}{T}ω=T2π​ and v=ωrv=\omega rv=ωr.

    • 1 mark for writing ω=2πT\omega=\frac{2\pi}{T}ω=T2π​ (or ω=2πf\omega=2\pi fω=2πf)
    • 1 mark for writing v=ωrv=\omega rv=ωr
  3. 3.Calculate[3 marks]

    Calculate the angular speed of a wheel that completes 5.0 revolutions in 2.0 s.

    Show mark schemeHide mark scheme

    Model answer

    Frequency =5.02.0 s=2.5 s−1=\frac{5.0}{2.0\,\mathrm{s}}=2.5\,\mathrm{s^{-1}}=2.0s5.0​=2.5s−1. Then ω=2πf=2π×2.5=16 rad s−1\omega=2\pi f=2\pi\times2.5=16\,\mathrm{rad\,s^{-1}}ω=2πf=2π×2.5=16rads−1.

    • 1 mark for finding the frequency as 2.5 revolutions each second
    • 1 mark for using ω=2πf\omega=2\pi fω=2πf
    • 1 mark for obtaining 16 rad s−116\,\mathrm{rad\,s^{-1}}16rads−1 (15.7 accepted)
  4. 4.Calculate[3 marks]

    A 0.250 kg ball moves in a horizontal circle of radius 0.80 m on a smooth table at 4.0 m s−14.0\,\mathrm{m\,s^{-1}}4.0ms−1. It is held by a string. Calculate the tension in the string.

    Show mark schemeHide mark scheme

    Model answer

    The tension provides the centripetal force. F=mv2r=0.250×4.020.80=5.0 NF=\frac{mv^2}{r}=\frac{0.250\times4.0^2}{0.80}=5.0\,\mathrm{N}F=rmv2​=0.800.250×4.02​=5.0N.

    • 1 mark for recognising that the tension is the centripetal force
    • 1 mark for substituting into F=mv2rF=\frac{mv^2}{r}F=rmv2​
    • 1 mark for obtaining 5.0 N5.0\,\mathrm{N}5.0N
  5. 5.Explain[2 marks]

    Explain why the centripetal force does not change the speed of an object moving in a circle.

    Show mark schemeHide mark scheme

    Model answer

    The acceleration, and so the force, is at right angles to the velocity. It changes the direction of the velocity but not its size.

    • 1 mark for stating that the force and acceleration are at right angles to the velocity
    • 1 mark for stating that this changes direction only, so the speed is unchanged
  6. 6.Suggest[3 marks]

    Suggest what happens to a ball whirled on a string when the string breaks.

    Show mark schemeHide mark scheme

    Model answer

    The centripetal force disappears. The ball then moves in a straight line along the tangent at the speed it had when the string broke. No resultant force acts, so its velocity stays constant.

    • 1 mark for stating that the centripetal force is no longer present
    • 1 mark for stating that the ball moves along the tangent in a straight line
    • 1 mark for stating that its speed stays constant because there is no resultant force

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

How many radians are there in one complete revolution?
Show answer and explanation

Answer: B · Worked explanation

One radian is the angle at the centre when the arc length equals the radius. The circumference is 2πr2\pi r2πr, so a full turn is 2π2\pi2π radians. The value 360 is the number of degrees in a full turn, not the number of radians.
4.

Medium·Calculate[1 mark]

A disc completes one revolution in 0.40 s. Calculate its angular speed.
Show answer and explanation

Answer: D · Worked explanation

Angular speed equals 2πT=2π0.40 s=15.7 rad s−1≈16 rad s−1\frac{2\pi}{T}=\frac{2\pi}{0.40\,\mathrm{s}}=15.7\,\mathrm{rad\,s^{-1}}\approx16\,\mathrm{rad\,s^{-1}}T2π​=0.40s2π​=15.7rads−1≈16rads−1. The value 2.5 comes from 1T\frac{1}{T}T1​, which is the frequency in revolutions each second, not the angular speed in radians each second. Always allow 2π2\pi2π radians for each revolution. The value 0.064 comes from dividing the period by 2π2\pi2π, which inverts the relationship.
5.

Medium·Calculate[1 mark]

A point on the rim of a wheel of radius 0.25 m moves with angular speed 12 rad s−112\,\mathrm{rad\,s^{-1}}12rads−1. Calculate its linear speed.
Show answer and explanation

Answer: A · Worked explanation

Linear speed is v=ωr=12 rad s−1×0.25 m=3.0 m s−1v=\omega r=12\,\mathrm{rad\,s^{-1}}\times0.25\,\mathrm{m}=3.0\,\mathrm{m\,s^{-1}}v=ωr=12rads−1×0.25m=3.0ms−1. The value 48 comes from dividing ω\omegaω by rrr instead of multiplying. The value 36 is ω2r\omega^2rω2r, which is an acceleration rather than a speed. The value 0.021 comes from dividing the radius by the angular speed. Check the unit: rad s−1\mathrm{rad\,s^{-1}}rads−1 multiplied by metres gives m s−1\mathrm{m\,s^{-1}}ms−1 once radians are dropped.
6.

Medium·Calculate[2 marks]

A 0.50 kg mass moves in a circle of radius 1.5 m at a steady 6.0 m s−16.0\,\mathrm{m\,s^{-1}}6.0ms−1. Calculate the centripetal force.
Show answer and explanation

Answer: C · Worked explanation

The force is F=mv2r=0.50×6.021.5=12 NF=\frac{mv^2}{r}=\frac{0.50\times6.0^2}{1.5}=12\,\mathrm{N}F=rmv2​=1.50.50×6.02​=12N. The value 18 N comes from leaving out the division by radius. The value 27 N comes from multiplying by the radius instead of dividing. The value 2.0 N comes from using mvr\frac{mv}{r}rmv​, which forgets to square the speed.
7.

Medium·Predict[2 marks]

Predict how the centripetal force needed changes when a car on a bend of fixed radius doubles its speed.
Show answer and explanation

Answer: B · Worked explanation

The force is F=mv2rF=\frac{mv^2}{r}F=rmv2​, so it is proportional to the speed squared. Doubling vvv multiplies the force by 22=42^2=422=4. Doubling would be correct only if the force were proportional to speed, which it is not. The same idea explains why safe speeds on tight bends are lower.
8.

Hard·Compare[2 marks]

Two points, P and Q, lie on a turntable spinning steadily. P is 0.10 m from the axis and Q is 0.30 m from the axis. Compare their motion.
Show answer and explanation

Answer: D · Worked explanation

Every point on a rigid turntable turns through the same angle in the same time, so all points share one angular speed. Linear speed is v=ωrv=\omega rv=ωr, so Q, at three times the radius, moves three times as fast as P. Equal linear speeds would need equal radii.
9.

Hard·Calculate[2 marks]

A 0.20 kg mass moves in a horizontal circle of radius 0.50 m with a period of 0.80 s. Calculate the centripetal force.
Show answer and explanation

Answer: B · Worked explanation

First ω=2π0.80 s=7.85 rad s−1\omega=\frac{2\pi}{0.80\,\mathrm{s}}=7.85\,\mathrm{rad\,s^{-1}}ω=0.80s2π​=7.85rads−1. Then F=mω2r=0.20×7.852×0.50=6.2 NF=m\omega^2r=0.20\times7.85^2\times0.50=6.2\,\mathrm{N}F=mω2r=0.20×7.852×0.50=6.2N. The value 12 N comes from using the diameter, 1.0 m, as the radius. The value 0.79 N comes from forgetting to square ω\omegaω. The value 0.16 N comes from using the frequency, 1T\frac{1}{T}T1​, in place of the angular speed in the formula.
10.

Hard·Explain[2 marks]

Explain why a car on a level road skids outwards if it takes a bend too fast.
Show answer and explanation

Answer: A · Worked explanation

Friction supplies the centripetal force, and the force needed is mv2r\frac{mv^2}{r}rmv2​, which rises with the square of the speed. Once it exceeds the maximum friction, the car cannot follow the curve and continues nearly along the tangent. There is no real outward centrifugal force.

Keep going

Next topic3.6.1.2 Simple harmonic motionPrevious topic3.5.1.6 EMF and internal resistance

More in Section 3.6 · Further mechanics and thermal physics

  1. 3.6.1.1Circular motionNotes · 10 questions
  2. 3.6.1.2Simple harmonic motionNotes · 10 questions
  3. 3.6.1.3Simple harmonic systemsNotes · 10 questions
  4. 3.6.1.4Forced vibrations and resonanceNotes · 10 questions
  5. 3.6.2.1Thermal energy transferNotes · 10 questions
  6. 3.6.2.2Ideal gasesNotes · 10 questions
  7. 3.6.2.3Kinetic theory modelNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1An object moving in a circle is always accelerating
  2. 2Angular speed measures how fast the angle turns
  3. 3Period and frequency are linked to angular speed
  4. 4Centripetal acceleration always points to the centre
  5. 5Centripetal force is the resultant force towards the centre
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe