Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.6 Further mechanics and thermal physics
  4. ›3.6.1.4 Forced vibrations and resonance

AQA A-level Physics · Section 3.6 · Further mechanics and thermal physics

3.6.1.4 Forced vibrations and resonance

Distinguish free from forced vibrations, and explain resonance and the effect of damping on amplitude against driving frequency.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A free vibration occurs at the natural frequency
  1. 1A free vibration occurs at the natural frequency
  2. 2A periodic driving force produces a forced vibration
  3. 3Resonance occurs when driving and natural frequencies match
  4. 4Amplitude against driving frequency forms a resonance curve
  5. 5Damping limits resonance and shapes how a system settles
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A free vibration occurs at the natural frequency

Tap a ruler that overhangs a desk edge and it vibrates, then settles. Nothing keeps pushing it after the first tap. This is a free vibration, where a system oscillates after a disturbance with no repeated external force.

The frequency of a free vibration is set by the system itself. This is its natural frequency. For a mass on a spring it depends on the mass and the spring constant.

Making the overhanging part of the ruler shorter raises its natural frequency. In practice the amplitude of a free vibration gradually falls as energy is lost to the surroundings.

Key terms · tap one for its definition

free vibration

A free vibration is an oscillation at the natural frequency after a disturbance, with no periodic external force acting.

natural frequency

The natural frequency is the frequency at which a system oscillates when disturbed and then left to vibrate freely.

Part 1 done

2

Part 2 of 5: A periodic driving force produces a forced vibration

Now suppose something keeps pushing the system, like a parent pushing a swing. A forced vibration occurs when a periodic external force acts on a system. The frequency of that force is the driving frequency.

After a short start-up period, the system vibrates at the driving frequency, not at its natural frequency. The driving force can be a push, a sound wave or an alternating voltage. The system is being made to vibrate at a rate that may not suit it.

Comparing free and forced vibrations.

FeatureFree vibrationForced vibration
Periodic external forcenone after the disturbanceapplied throughout
Frequency of vibrationnatural frequencydriving frequency
Amplitudefalls if energy is lostdepends on driving frequency
Feature
Periodic external force
Free vibration
none after the disturbance
Forced vibration
applied throughout
Feature
Frequency of vibration
Free vibration
natural frequency
Forced vibration
driving frequency
Feature
Amplitude
Free vibration
falls if energy is lost
Forced vibration
depends on driving frequency

Key terms · tap one for its definition

forced vibration

A forced vibration is an oscillation caused by a periodic external force, occurring at the frequency of that force.

driving frequency

The driving frequency is the frequency of the periodic external force applied to a system.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the description of a free vibration.
Show answer and explanation

Answer: B · Worked explanation

In a free vibration the system is disturbed and then left alone, so it oscillates at its own natural frequency. Oscillation at the frequency of an external force describes a forced vibration instead. A system that keeps being pushed periodically is forced, not free, and its frequency follows the push.
3

Part 3 of 5: Resonance occurs when driving and natural frequencies match

The amplitude of a forced vibration rises sharply near one particular driving frequency. When the driving frequency equals the natural frequency, the amplitude becomes very large. This is resonance.

At resonance the driver transfers energy to the system most effectively. Energy is added in every cycle, and the amplitude grows until the energy lost matches the energy supplied.

Common mistake

Resonance does not make the amplitude grow without limit. Energy losses to the surroundings rise with amplitude and limit the peak.

Resonance can be useful or a problem. These are examples.

  • A swing pushed in time with its natural motion.
  • A radio circuit tuned to the frequency of one station.
  • A car panel rattling at one particular engine speed.
  • A bridge or building shaking in the wind or an earthquake.

Key term

resonance

Resonance is the large response produced when a driving frequency matches an allowed natural frequency.

Part 3 done

4

Part 4 of 5: Amplitude against driving frequency forms a resonance curve

A graph shows how the response changes as the driving frequency changes. Keep the driving force constant and vary the driving frequency. Plot the amplitude of the vibration against driving frequency. The curve rises to a peak at the natural frequency, f0f_0f0​, and falls on both sides. At very low driving frequency the amplitude is small, and at very high driving frequency it is small again.

Figure 1. Both curves peak close to the natural frequency. The lightly damped curve has the taller, narrower peak.

The shape of the peak depends on damping. Lighter damping gives a taller, narrower peak. Heavier damping gives a lower, broader peak, centred slightly below f0f_0f0​.

Part 4 done

Quick check

One question on the part you just read

Easy

State the condition for resonance.
Show answer and explanation

Answer: A · Worked explanation

Resonance occurs when the driving frequency matches the natural frequency of the system, giving a large amplitude. A larger driving force raises the amplitude at every frequency, but it does not create resonance. Doubling the driving frequency or halving it would move the system away from the peak.
5

Part 5 of 5: Damping limits resonance and shapes how a system settles

The size of the peak depends on how quickly the system loses energy. Energy loss to the surroundings is called damping. Friction, air resistance and internal forces in materials all cause it.

With light damping the amplitude falls slowly and resonance is strong. With heavy damping the amplitude falls quickly and resonance is weak.

The case of critical damping brings a displaced system back to equilibrium in the shortest time without oscillating. Door closers and vehicle suspensions use damping close to this.

Exam tip

To describe the effect of damping on a resonance curve, mention the peak height and the peak width. For heavy damping, also mention the small shift to lower frequency.

Key terms · tap one for its definition

damping

Damping is the loss of energy from an oscillating system to its surroundings, which reduces the amplitude.

critical damping

Critical damping is the damping that returns a displaced system to equilibrium in the shortest time without oscillation.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State two differences between a free vibration and a forced vibration.

    Show mark schemeHide mark scheme

    Model answer

    A free vibration has no periodic external force after the disturbance, but a forced vibration has one applied throughout. A free vibration is at the natural frequency, but a forced vibration is at the driving frequency.

    • 1 mark for stating a difference in the external force
    • 1 mark for stating a difference in the frequency of vibration
  2. 2.Describe[3 marks]

    Describe how the amplitude of a forced vibration changes as the driving frequency increases from well below to well above the natural frequency.

    Show mark schemeHide mark scheme

    Model answer

    The amplitude is small at low driving frequency. It rises to a maximum when the driving frequency equals the natural frequency. It then falls again at higher driving frequencies.

    • 1 mark for stating that the amplitude is small at low driving frequency
    • 1 mark for stating that the amplitude is a maximum at the natural frequency
    • 1 mark for stating that the amplitude falls again above the natural frequency
  3. 3.Explain[3 marks]

    Explain why the amplitude is large at resonance.

    Show mark schemeHide mark scheme

    Model answer

    The driving frequency equals the natural frequency, so the driver transfers energy to the system most effectively. Energy is added in every cycle. The amplitude grows until the energy lost equals the energy supplied.

    • 1 mark for stating that the driving frequency equals the natural frequency
    • 1 mark for stating that energy transfer from the driver is greatest
    • 1 mark for stating that the amplitude is limited when energy lost equals energy supplied
  4. 4.Compare[3 marks]

    Compare the resonance curves for light damping and heavy damping.

    Show mark schemeHide mark scheme

    Model answer

    Light damping gives a taller, narrower peak. Heavy damping gives a lower, broader peak. The heavy damping peak is centred slightly below the natural frequency.

    • 1 mark for stating that light damping gives a taller peak
    • 1 mark for stating that light damping gives a narrower peak than heavy damping
    • 1 mark for stating that heavy damping gives a lower, broader peak, slightly below the natural frequency
  5. 5.Give[2 marks]

    Give one example where resonance is useful and one example where it is unwanted.

    Show mark schemeHide mark scheme

    Model answer

    Useful: tuning a radio circuit to one station. Unwanted: a car panel rattling at one engine speed.

    • 1 mark for a correct example where resonance is useful
    • 1 mark for a correct example where resonance is unwanted
  6. 6.Suggest[2 marks]

    Suggest why a vehicle suspension is designed with damping close to critical damping.

    Show mark schemeHide mark scheme

    Model answer

    Critical damping returns the vehicle to equilibrium in the shortest time. It does so without oscillating, so the vehicle does not keep bouncing.

    • 1 mark for stating that the suspension returns to equilibrium in the shortest time
    • 1 mark for stating that this happens without oscillation

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify an example of unwanted resonance.
Show answer and explanation

Answer: D · Worked explanation

A panel that rattles at one engine speed is vibrating strongly because the engine’s driving frequency matches its natural frequency, and the effect is a nuisance. The other examples use resonance deliberately to gain a larger response. The other examples listed are cases where the larger response is the whole point.
4.

Medium·Identify[1 mark]

A lightly damped system has a natural frequency of 5.0 Hz. It is driven at 2.0 Hz, 4.8 Hz, 6.5 Hz and 8.0 Hz. Identify the driving frequency that gives the largest amplitude.
Show answer and explanation

Answer: C · Worked explanation

The amplitude is largest when the driving frequency is closest to the natural frequency, which is 5.0 Hz. The value 4.8 Hz is only 0.2 Hz away. The value 6.5 Hz is 1.5 Hz away, so the response there is much smaller.
5.

Medium·Compare[1 mark]

Compare the resonance peak of a heavily damped system with that of a lightly damped system.
Show answer and explanation

Answer: B · Worked explanation

Heavy damping removes energy faster, so the amplitude at resonance is smaller, and the peak is spread over a wider range of frequencies. Heavy damping does not make the peak taller or move it to a higher frequency. Heavy damping also shifts the peak slightly below the natural frequency.
6.

Medium·Determine[2 marks]

A system with natural frequency 3.0 Hz is driven at 5.0 Hz and has settled into steady vibration. Determine the frequency at which it vibrates.
Show answer and explanation

Answer: D · Worked explanation

In steady forced vibration the system vibrates at the driving frequency, which is 5.0 Hz. The natural frequency of 3.0 Hz sets how large the response is, not how fast it vibrates. The values 2.0 Hz and 8.0 Hz have no physical meaning here.
7.

Medium·Identify[1 mark]

Identify what critical damping does to a displaced system.
Show answer and explanation

Answer: A · Worked explanation

Critical damping is the amount of damping that brings a displaced system back to equilibrium as quickly as possible without oscillating. Heavier damping than this returns the system more slowly. Lighter damping lets it oscillate. This is why door closers and suspensions are designed with damping close to this value.
8.

Hard·Explain[2 marks]

Explain why heavy damping lowers the amplitude at resonance.
Show answer and explanation

Answer: A · Worked explanation

At resonance the amplitude grows until the energy lost in each cycle equals the energy supplied by the driver. With heavy damping, more energy is lost per cycle, so balance is reached at a smaller amplitude. Damping changes the energy lost, not the driving force.
9.

Hard·Determine[2 marks]

A swing has a natural frequency of 0.50 Hz. Determine the time between pushes that gives the largest amplitude.
Show answer and explanation

Answer: B · Worked explanation

The driving frequency should equal 0.50 Hz, so the time between pushes is 1f=10.50 Hz=2.0 s\frac{1}{f}=\frac{1}{0.50\,\mathrm{Hz}}=2.0\,\mathrm{s}f1​=0.50Hz1​=2.0s. The value 0.50 s comes from using the frequency as if it were the time between pushes. Pushing every 1.0 s drives the swing at 1.0 Hz, which is not resonance.
10.

Hard·Identify[2 marks]

Identify the correct statement about resonance in a real system.
Show answer and explanation

Answer: C · Worked explanation

Energy lost to the surroundings rises with amplitude, so a real system settles at a finite amplitude at resonance. Resonance still occurs with damping, only with a smaller peak. The size of the driving force does not decide whether resonance occurs.

Keep going

Next topic3.6.2.1 Thermal energy transferPrevious topic3.6.1.3 Simple harmonic systems

More in Section 3.6 · Further mechanics and thermal physics

  1. 3.6.1.1Circular motionNotes · 10 questions
  2. 3.6.1.2Simple harmonic motionNotes · 10 questions
  3. 3.6.1.3Simple harmonic systemsNotes · 10 questions
  4. 3.6.1.4Forced vibrations and resonanceNotes · 10 questions
  5. 3.6.2.1Thermal energy transferNotes · 10 questions
  6. 3.6.2.2Ideal gasesNotes · 10 questions
  7. 3.6.2.3Kinetic theory modelNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1A free vibration occurs at the natural frequency
  2. 2A periodic driving force produces a forced vibration
  3. 3Resonance occurs when driving and natural frequencies match
  4. 4Amplitude against driving frequency forms a resonance curve
  5. 5Damping limits resonance and shapes how a system settles
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Amplitude against driving frequency

Amplitude (arbitrary units)00.511.52012345Driving frequency ÷ natural frequency (no units)
  • Light damping
  • Heavy damping