Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.6 Further mechanics and thermal physics
  4. ›3.6.2.2 Ideal gases

AQA A-level Physics · Section 3.6 · Further mechanics and thermal physics

3.6.2.2 Ideal gases

State the assumptions of the ideal gas model, convert between Celsius and kelvin, and use the ideal gas equation to solve problems.

  • 4 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6An ideal gas is a simplified model of real gases
  1. 1An ideal gas is a simplified model of real gases
  2. 2The kelvin scale starts at absolute zero
  3. 3Squeezing a gas raises its pressure at constant temperature
  4. 4Pressure and volume also rise in proportion to kelvin temperature
  5. 5One equation combines all three gas relationships
  6. 6The same law can count molecules instead of moles
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: An ideal gas is a simplified model of real gases

Real gases contain huge numbers of particles with complicated interactions. Physicists simplify them with a model. An ideal gas is a gas that obeys a short list of assumptions, which makes the physics manageable.

The model makes these assumptions.

  • The particles move randomly and continuously.
  • The volume of the particles is negligible compared with the container.
  • There are no forces between particles except during collisions.
  • Every collision is an elastic collision, including those with the walls.
  • Collisions last a negligible time compared with the time between them.

Real gases behave almost ideally when their particles are far apart and moving fast.

Key terms · tap one for its definition

ideal gas

An ideal gas is a model whose particles have negligible volume and interact only through elastic collisions.

elastic collision

An elastic collision is one in which no kinetic energy, the energy of motion, is lost.

Part 1 done

2

Part 2 of 6: The kelvin scale starts at absolute zero

A hotter gas has faster particles. Temperature tells you how much energy the particles have on average. It cannot fall without limit, because particles cannot have less than a minimum energy. The lowest possible value is absolute zero.

The kelvin scale, with symbol TTT, starts at absolute zero. The Celsius scale, with symbol θ\thetaθ, does not. Absolute zero is 0 K0\,\mathrm{K}0K, which is about −273 ∘C-273\,^{\circ}\mathrm{C}−273∘C.

The scales are linked by T=θ+273T=\theta+273T=θ+273, with TTT in kelvin and θ\thetaθ in degrees Celsius. A change of 1 K1\,\mathrm{K}1K equals a change of 1 ∘C1\,^{\circ}\mathrm{C}1∘C.

Worked example

Converting between scales

Convert 27 ∘C27\,^{\circ}\mathrm{C}27∘C to kelvin, and convert 400 K400\,\mathrm{K}400K to degrees Celsius.
  1. 1
    Use T=θ+273T=\theta+273T=θ+273.
  2. 2
    For 27 ∘C27\,^{\circ}\mathrm{C}27∘C: T=27+273=300 KT=27+273=300\,\mathrm{K}T=27+273=300K.
  3. 3
    Rearrange for the Celsius value: θ=T−273\theta=T-273θ=T−273.
  4. 4
    For 400 K400\,\mathrm{K}400K: θ=400−273=127 ∘C\theta=400-273=127\,^{\circ}\mathrm{C}θ=400−273=127∘C.

Answer: 27 ∘C27\,^{\circ}\mathrm{C}27∘C is 300 K300\,\mathrm{K}300K, and 400 K400\,\mathrm{K}400K is 127 ∘C127\,^{\circ}\mathrm{C}127∘C.

Exam tip

Always change temperatures to kelvin before using a gas relationship. Using degrees Celsius gives a wrong answer.

Key terms · tap one for its definition

temperature

Temperature indicates the average kinetic energy of particles in a substance.

absolute zero

Absolute zero is the lowest possible temperature, 0 K0\,\mathrm{K}0K or about −273 ∘C-273\,^{\circ}\mathrm{C}−273∘C.

Part 2 done

Quick check

One question on the part you just read

Easy

State one assumption of the ideal gas model.
Show answer and explanation

Answer: B · Worked explanation

The ideal gas model assumes elastic collisions, so no kinetic energy is lost when particles collide. It also assumes that particle volume is negligible and that there are no forces between particles except during collisions. Strong attraction and fixed paths both contradict the model, because the motion is random.
3

Part 3 of 6: Squeezing a gas raises its pressure at constant temperature

Push the handle of a sealed bicycle pump and the air resists. The same gas is squeezed into a smaller volume. The force on each unit of wall area, the pressure, rises.

At constant temperature, the pressure of a fixed amount of gas is inversely proportional to its volume. Doubling the volume halves the pressure. The product is constant, so p1V1=p2V2p_1V_1=p_2V_2p1​V1​=p2​V2​. This is Boyle’s law.

Figure 1. At fixed temperature and amount of gas, pressure falls as volume rises and the product pV stays constant.

The curve gets closer to both axes but never touches them. Plotting ppp against 1V\frac{1}{V}V1​ gives a straight line through the origin.

Key term

pressure

Pressure ppp is the normal force per unit area, measured in pascals, where 1 Pa=1 N m−21\,\mathrm{Pa}=1\,\mathrm{N\,m^{-2}}1Pa=1Nm−2.

Part 3 done

4

Part 4 of 6: Pressure and volume also rise in proportion to kelvin temperature

Now let the temperature change as well. Heat a sealed, rigid container and the particles move faster. They hit the walls harder and more often, so the pressure rises. At constant volume, ppp is directly proportional to TTT in kelvin.

Let a gas expand freely at constant pressure, such as air in a balloon placed in warm water. Its volume rises in proportion to TTT in kelvin.

Three relationships for a fixed amount of gas

RelationshipHeld constantResult
Boyle’s lawTTTpVpVpV is constant
Pressure lawVVVpT\frac{p}{T}Tp​ is constant
Charles’s lawpppVT\frac{V}{T}TV​ is constant
Relationship
Boyle’s law
Held constant
TTT
Result
pVpVpV is constant
Relationship
Pressure law
Held constant
VVV
Result
pT\frac{p}{T}Tp​ is constant
Relationship
Charles’s law
Held constant
ppp
Result
VT\frac{V}{T}TV​ is constant

Common mistake

Raising a gas from 20 ∘C20\,^{\circ}\mathrm{C}20∘C to 40 ∘C40\,^{\circ}\mathrm{C}40∘C does not double its pressure. Only doubling the temperature in kelvin does.

Part 4 done

Quick check

One question on the part you just read

Easy

Give the temperature 25 ∘C25\,^{\circ}\mathrm{C}25∘C in kelvin.
Show answer and explanation

Answer: A · Worked explanation

Use T=θ+273T=\theta+273T=θ+273, so T=25+273=298 KT=25+273=298\,\mathrm{K}T=25+273=298K. The value 248 K248\,\mathrm{K}248K comes from subtracting 273 instead of adding it. Kelvin temperatures are always greater than the matching Celsius values at normal temperatures, because the kelvin scale starts at absolute zero. Always add 273 when converting from Celsius to kelvin, and always check that the answer is a sensible size.
5

Part 5 of 6: One equation combines all three gas relationships

The three relationships combine into one equation. Gases are counted in moles. The Avogadro constant, NA=6.02×1023 mol−1N_\mathrm{A}=6.02\times10^{23}\,\mathrm{mol^{-1}}NA​=6.02×1023mol−1, is the number of particles in one mole.

The ideal gas equation is pV=nRTpV=nRTpV=nRT. Here ppp is pressure in pascals and VVV is volume in cubic metres. The amount of gas is nnn in moles, and TTT is temperature in kelvin.

The molar gas constant is R=8.31 J K−1 mol−1R=8.31\,\mathrm{J\,K^{-1}\,mol^{-1}}R=8.31JK−1mol−1. For a fixed amount of gas, pVT\frac{pV}{T}TpV​ stays constant, so p1V1T1=p2V2T2\frac{p_1V_1}{T_1}=\frac{p_2V_2}{T_2}T1​p1​V1​​=T2​p2​V2​​.

Exam tip

Convert volumes in cm3\mathrm{cm^3}cm3 or dm3\mathrm{dm^3}dm3 to m3\mathrm{m^3}m3, and pressures in kPa to Pa, before substituting.

Key terms · tap one for its definition

mole

A mole is the amount of substance that contains 6.02×10236.02\times10^{23}6.02×1023 particles, the Avogadro constant.

ideal gas equation

The ideal gas equation is pV=nRTpV=nRTpV=nRT, linking the pressure, volume, amount and temperature of an ideal gas.

Part 5 done

6

Part 6 of 6: The same law can count molecules instead of moles

Sometimes the number of molecules NNN is given instead of moles. This form is useful for counting individual molecules. Since n=NNAn=\frac{N}{N_\mathrm{A}}n=NA​N​, the equation becomes pV=NkTpV=NkTpV=NkT. The Boltzmann constant kkk has the value 1.38×10−23 J K−11.38\times10^{-23}\,\mathrm{J\,K^{-1}}1.38×10−23JK−1.

Choose the form that matches the data. If moles are given, use pV=nRTpV=nRTpV=nRT. If a number of molecules is given, use pV=NkTpV=NkTpV=NkT. In both forms, pressure must be in pascals, volume in cubic metres and temperature in kelvin.

Worked example

Volume of a gas sample

A sealed container holds 0.40 mol0.40\,\mathrm{mol}0.40mol of an ideal gas at 27 ∘C27\,^{\circ}\mathrm{C}27∘C and 2.0×105 Pa2.0\times10^{5}\,\mathrm{Pa}2.0×105Pa. Calculate its volume.
  1. 1
    Word equation: pressure ×\times× volume = amount ×\times× gas constant ×\times× temperature.
  2. 2
    Symbol equation, rearranged: V=nRTpV=\frac{nRT}{p}V=pnRT​.
  3. 3
    Convert the temperature: T=27+273=300 KT=27+273=300\,\mathrm{K}T=27+273=300K.
  4. 4
    Substitute: V=(0.40 mol)(8.31 J K−1 mol−1)(300 K)2.0×105 Pa=997.22.0×105 m3V=\frac{(0.40\,\mathrm{mol})(8.31\,\mathrm{J\,K^{-1}\,mol^{-1}})(300\,\mathrm{K})}{2.0\times10^{5}\,\mathrm{Pa}}=\frac{997.2}{2.0\times10^{5}}\,\mathrm{m^3}V=2.0×105Pa(0.40mol)(8.31JK−1mol−1)(300K)​=2.0×105997.2​m3.

Answer: The volume is V≈5.0×10−3 m3V\approx5.0\times10^{-3}\,\mathrm{m^3}V≈5.0×10−3m3.

Check that the units cancel. Dividing joules by pascals leaves cubic metres, as a volume should.

Key term

Boltzmann constant

The Boltzmann constant kkk is the molar gas constant divided by the Avogadro constant, 1.38×10−23 J K−11.38\times10^{-23}\,\mathrm{J\,K^{-1}}1.38×10−23JK−1.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[3 marks]

    State three assumptions of the ideal gas model.

    Show mark schemeHide mark scheme

    Model answer

    The volume of the particles is negligible compared with the container. There are no forces between the particles except during collisions. All collisions are elastic.

    • 1 mark for stating that particle volume is negligible
    • 1 mark for stating that there are no forces except during collisions
    • 1 mark for stating that collisions are elastic
    • 1 mark for stating that particles move randomly (alternative)
    • 1 mark for stating that collisions last a negligible time (alternative)
  2. 2.Calculate[2 marks]

    Calculate the temperature in kelvin that corresponds to −23 ∘C-23\,^{\circ}\mathrm{C}−23∘C, and the temperature in degrees Celsius that corresponds to 350 K350\,\mathrm{K}350K.

    Show mark schemeHide mark scheme

    Model answer

    T=−23+273=250 KT=-23+273=250\,\mathrm{K}T=−23+273=250K and θ=350−273=77 ∘C\theta=350-273=77\,^{\circ}\mathrm{C}θ=350−273=77∘C.

    • 1 mark for obtaining 250 K250\,\mathrm{K}250K
    • 1 mark for obtaining 77 ∘C77\,^{\circ}\mathrm{C}77∘C
  3. 3.Explain[3 marks]

    Explain why the pressure of a fixed amount of gas in a rigid sealed container rises when the gas is heated.

    Show mark schemeHide mark scheme

    Model answer

    Heating makes the particles move faster. They hit the walls harder. They also hit the walls more often, so the pressure rises.

    • 1 mark for stating that the particles move faster
    • 1 mark for stating that the particles hit the walls harder
    • 1 mark for stating that the particles hit the walls more often
  4. 4.Calculate[3 marks]

    Calculate the pressure of 0.30 mol0.30\,\mathrm{mol}0.30mol of an ideal gas at 350 K350\,\mathrm{K}350K in a volume of 4.0×10−3 m34.0\times10^{-3}\,\mathrm{m^3}4.0×10−3m3.

    Show mark schemeHide mark scheme

    Model answer

    p=nRTV=0.30×8.31×3504.0×10−3≈2.2×105 Pap=\frac{nRT}{V}=\frac{0.30\times8.31\times350}{4.0\times10^{-3}}\approx2.2\times10^{5}\,\mathrm{Pa}p=VnRT​=4.0×10−30.30×8.31×350​≈2.2×105Pa.

    • 1 mark for rearranging to p=nRTVp=\frac{nRT}{V}p=VnRT​
    • 1 mark for substituting the values correctly
    • 1 mark for obtaining 2.2×105 Pa2.2\times10^{5}\,\mathrm{Pa}2.2×105Pa
  5. 5.Suggest[3 marks]

    Suggest why a real gas compressed to a very high pressure may not obey the ideal gas equation.

    Show mark schemeHide mark scheme

    Model answer

    The particles are much closer together. Their volume is then no longer negligible compared with the container. Forces between the particles also become significant.

    • 1 mark for stating that the particles are much closer together
    • 1 mark for stating that the particle volume is no longer negligible
    • 1 mark for stating that forces between particles become significant

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

A fixed amount of gas at constant temperature is compressed to one third of its volume. State the change in pressure.
Show answer and explanation

Answer: D · Worked explanation

At constant temperature, pVpVpV is constant, so the pressure is inversely proportional to the volume. Reducing the volume to one third makes the pressure three times larger. A fall to one third would happen if the pressure were directly proportional to volume, which it is not.
4.

Medium·Calculate[2 marks]

A sealed rigid container holds gas at 2.0×105 Pa2.0\times10^{5}\,\mathrm{Pa}2.0×105Pa and 27 ∘C27\,^{\circ}\mathrm{C}27∘C. The gas is heated to 177 ∘C177\,^{\circ}\mathrm{C}177∘C. Calculate the new pressure.
Show answer and explanation

Answer: C · Worked explanation

At constant volume, p1T1=p2T2\frac{p_1}{T_1}=\frac{p_2}{T_2}T1​p1​​=T2​p2​​ with kelvin temperatures 300 K300\,\mathrm{K}300K and 450 K450\,\mathrm{K}450K. So p2=2.0×105×450300=3.0×105 Pap_2=2.0\times10^{5}\times\frac{450}{300}=3.0\times10^{5}\,\mathrm{Pa}p2​=2.0×105×300450​=3.0×105Pa. The value 1.3×106 Pa1.3\times10^{6}\,\mathrm{Pa}1.3×106Pa comes from using Celsius temperatures, which is not valid. The value 1.3×105 Pa1.3\times10^{5}\,\mathrm{Pa}1.3×105Pa comes from inverting the temperature ratio, which would wrongly make the pressure fall on heating.
5.

Medium·Calculate[2 marks]

Calculate the volume of 2.0 mol2.0\,\mathrm{mol}2.0mol of an ideal gas at 300 K300\,\mathrm{K}300K and 1.0×105 Pa1.0\times10^{5}\,\mathrm{Pa}1.0×105Pa.
Show answer and explanation

Answer: A · Worked explanation

V=nRTp=2.0×8.31×3001.0×105=49861.0×105≈5.0×10−2 m3V=\frac{nRT}{p}=\frac{2.0\times8.31\times300}{1.0\times10^{5}}=\frac{4986}{1.0\times10^{5}}\approx5.0\times10^{-2}\,\mathrm{m^3}V=pnRT​=1.0×1052.0×8.31×300​=1.0×1054986​≈5.0×10−2m3. The value 1.2×10−2 m31.2\times10^{-2}\,\mathrm{m^3}1.2×10−2m3 comes from dividing by nnn instead of multiplying by it. The value 6.0×10−3 m36.0\times10^{-3}\,\mathrm{m^3}6.0×10−3m3 comes from leaving out the gas constant. Check that every quantity is in SI units: moles, kelvin, pascals and cubic metres. The temperature of 300 K300\,\mathrm{K}300K was already in kelvin.
6.

Medium·Explain[1 mark]

Explain why gas calculations use temperatures in kelvin.
Show answer and explanation

Answer: D · Worked explanation

Relationships such as p∝Tp\propto Tp∝T hold only when the scale starts at absolute zero, so that doubling the temperature doubles the average energy of the particles. The Celsius scale has its zero at a different place. The kelvin and Celsius degrees are the same size, so the idea that kelvin degrees are larger is false.
7.

Medium[1 mark]

Which gas sample behaves most like an ideal gas?
Show answer and explanation

Answer: A · Worked explanation

An ideal gas has particles of negligible volume and no forces except during collisions. These assumptions work best when the particles are far apart and moving fast. Compression, strong attractions and near-liquid conditions all make particle volume and forces important, so the gas departs from the model.
8.

Hard·Calculate[2 marks]

A fixed mass of ideal gas has pressure 1.0×105 Pa1.0\times10^{5}\,\mathrm{Pa}1.0×105Pa, volume 4.0×10−3 m34.0\times10^{-3}\,\mathrm{m^3}4.0×10−3m3 and temperature 27 ∘C27\,^{\circ}\mathrm{C}27∘C. It is compressed to 1.0×10−3 m31.0\times10^{-3}\,\mathrm{m^3}1.0×10−3m3 and heated to 127 ∘C127\,^{\circ}\mathrm{C}127∘C. Calculate the final pressure.
Show answer and explanation

Answer: B · Worked explanation

Use p1V1T1=p2V2T2\frac{p_1V_1}{T_1}=\frac{p_2V_2}{T_2}T1​p1​V1​​=T2​p2​V2​​ with T1=300 KT_1=300\,\mathrm{K}T1​=300K and T2=400 KT_2=400\,\mathrm{K}T2​=400K. Then p2=1.0×105×4.01.0×400300≈5.3×105 Pap_2=1.0\times10^{5}\times\frac{4.0}{1.0}\times\frac{400}{300}\approx5.3\times10^{5}\,\mathrm{Pa}p2​=1.0×105×1.04.0​×300400​≈5.3×105Pa. The value 4.0×105 Pa4.0\times10^{5}\,\mathrm{Pa}4.0×105Pa ignores the temperature change, and 1.9×106 Pa1.9\times10^{6}\,\mathrm{Pa}1.9×106Pa comes from using Celsius values. Always convert both temperatures to kelvin first, then combine the three ratios of pressure, volume and temperature in one step.
9.

Hard·Calculate[2 marks]

A sealed rigid container of gas at 20 ∘C20\,^{\circ}\mathrm{C}20∘C is heated until its pressure doubles. Calculate the final temperature in degrees Celsius.
Show answer and explanation

Answer: D · Worked explanation

The initial temperature is 20+273=293 K20+273=293\,\mathrm{K}20+273=293K. At constant volume, doubling the pressure doubles the kelvin temperature to 586 K586\,\mathrm{K}586K. Converting back gives 586−273=313 ∘C586-273=313\,^{\circ}\mathrm{C}586−273=313∘C. The value 40 ∘C40\,^{\circ}\mathrm{C}40∘C comes from doubling the Celsius temperature, and 586 ∘C586\,^{\circ}\mathrm{C}586∘C comes from forgetting to convert back from kelvin.
10.

Hard·Calculate[2 marks]

A container of volume 2.0×10−3 m32.0\times10^{-3}\,\mathrm{m^3}2.0×10−3m3 holds an ideal gas at 1.0×105 Pa1.0\times10^{5}\,\mathrm{Pa}1.0×105Pa and 27 ∘C27\,^{\circ}\mathrm{C}27∘C. Calculate the number of molecules. Use k=1.38×10−23 J K−1k=1.38\times10^{-23}\,\mathrm{J\,K^{-1}}k=1.38×10−23JK−1.
Show answer and explanation

Answer: C · Worked explanation

Use N=pVkTN=\frac{pV}{kT}N=kTpV​ with T=300 KT=300\,\mathrm{K}T=300K. So N=(1.0×105)(2.0×10−3)(1.38×10−23)(300)=2004.14×10−21≈4.8×1022N=\frac{(1.0\times10^{5})(2.0\times10^{-3})}{(1.38\times10^{-23})(300)}=\frac{200}{4.14\times10^{-21}}\approx4.8\times10^{22}N=(1.38×10−23)(300)(1.0×105)(2.0×10−3)​=4.14×10−21200​≈4.8×1022. The value 5.4×10235.4\times10^{23}5.4×1023 comes from using 27 instead of 300 for the temperature. The value 8.0×10−28.0\times10^{-2}8.0×10−2 is the number of moles, not molecules. It is found from n=pVRTn=\frac{pV}{RT}n=RTpV​ and is a common slip when the question asks for a count of particles.

Keep going

Next topic3.6.2.3 Kinetic theory modelPrevious topic3.6.2.1 Thermal energy transfer

More in Section 3.6 · Further mechanics and thermal physics

  1. 3.6.1.1Circular motionNotes · 10 questions
  2. 3.6.1.2Simple harmonic motionNotes · 10 questions
  3. 3.6.1.3Simple harmonic systemsNotes · 10 questions
  4. 3.6.1.4Forced vibrations and resonanceNotes · 10 questions
  5. 3.6.2.1Thermal energy transferNotes · 10 questions
  6. 3.6.2.2Ideal gasesNotes · 10 questions
  7. 3.6.2.3Kinetic theory modelNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1An ideal gas is a simplified model of real gases
  2. 2The kelvin scale starts at absolute zero
  3. 3Squeezing a gas raises its pressure at constant temperature
  4. 4Pressure and volume also rise in proportion to kelvin temperature
  5. 5One equation combines all three gas relationships
  6. 6The same law can count molecules instead of moles
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Pressure against volume at constant temperature

Pressure (10⁵ Pa)0123456012345Volume (10⁻³ m³)
  • Fixed amount and temperature
  • V = 1.0, p = 2.4
  • V = 2.0, p = 1.2