Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›6 Thermochemistry
  4. ›6.2 Energy diagrams

AP Chemistry · Unit 6 · Thermochemistry

6.2 Energy diagrams

Interpret energy diagrams, label their features, and connect their shapes to reaction energetics.

  • 4 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4An energy diagram tracks energy as a reaction proceeds
  1. 1An energy diagram tracks energy as a reaction proceeds
  2. 2The peak shows the activation energy barrier
  3. 3Starting and ending heights show the energy change
  4. 4Vertical differences give both barriers and enthalpy change
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: An energy diagram tracks energy as a reaction proceeds

An energy diagram shows how a reacting system’s potential energy changes during a reaction. The vertical axis shows energy, often in kJ mol−1\mathrm{kJ\,mol^{-1}}kJmol−1. The horizontal axis shows reaction progress, not elapsed time. Its left side represents reactants before they react. Its right side represents products after the reaction. A curve between them shows the energy changes along a possible reaction pathway.

The curve usually rises before it falls because rearranging bonds requires an energetic pathway. Its highest point represents the transition state. This is a short-lived arrangement, not an isolable product. Read energy differences from vertical distances. Horizontal distances do not tell you how long the reaction takes.

Common mistake

A wider curve does not mean a slower reaction. Reaction progress has no time scale.

Figure 1. The starting and ending levels mark reactants and products. The curve’s peak lies above both levels.

Key terms · tap one for its definition

energy diagram

An energy diagram plots a reacting system’s energy against reaction progress.

reaction progress

Reaction progress indicates position along a reaction pathway, without specifying elapsed time.

transition state

The transition state is the short-lived, highest-energy arrangement along a reaction pathway.

Part 1 done

2

Part 2 of 4: The peak shows the activation energy barrier

The activation energy for the forward reaction is the energy difference between reactants and the peak. Label it with a vertical arrow from the reactant energy level to the peak. For the reverse reaction, measure from the product level to that same peak. These barriers can differ because reactants and products may have different energies.

A higher barrier generally means fewer particles can react at a given temperature. The diagram shows the barrier, but its shape alone does not give a numerical reaction rate. A catalyst provides a different pathway with a lower activation energy. It does not change the energy levels of the reactants or products.

Exam tip

When labeling activation energy, draw the arrow to the peak. Do not measure it from the bottom of the axis.

Key terms · tap one for its definition

activation energy

Activation energy is the energy difference between the starting level and the pathway’s peak.

catalyst

A catalyst provides a lower-barrier reaction pathway without changing reactant or product energy levels.

Part 2 done

Quick check

One question on the part you just read

Easy

On an energy diagram, a curve reaches a short-lived arrangement at its highest point. What does that point represent?
Show answer and explanation

Answer: A · Worked explanation

The highest point on the pathway represents the transition state, a short-lived arrangement of atoms at the greatest energy along that pathway. The forward activation energy is the energy difference from the reactant level to this peak, not the peak itself.
3

Part 3 of 4: Starting and ending heights show the energy change

Compare the product and reactant levels to find the overall energy change. The reaction enthalpy, ΔH\Delta HΔH, is product enthalpy minus reactant enthalpy at constant pressure. On an enthalpy diagram, this is their vertical difference. Products below reactants give a negative ΔH\Delta HΔH and an exothermic reaction. Products above reactants give a positive ΔH\Delta HΔH and an endothermic reaction.

The peak height does not determine whether the reaction is exothermic or endothermic. Compare only the starting and ending levels for that decision. A large activation energy can occur alongside either sign of ΔH\Delta HΔH. If the diagram labels its vertical axis as potential energy, use the plotted levels to compare energies. Identify ΔH\Delta HΔH only when the diagram represents enthalpy.

Key terms · tap one for its definition

reaction enthalpy

Reaction enthalpy is the enthalpy of products minus the enthalpy of reactants.

exothermic reaction

An exothermic reaction has products below reactants on an enthalpy diagram and a negative enthalpy change.

endothermic reaction

An endothermic reaction has products above reactants on an enthalpy diagram and a positive enthalpy change.

Part 3 done

4

Part 4 of 4: Vertical differences give both barriers and enthalpy change

Read all three levels before calculating from an energy diagram. Subtract the reactant level from the peak for the forward energy barrier. Subtract the product level from the peak for the reverse barrier. For ΔH\Delta HΔH, subtract the reactant level from the product level. Keep negative signs when reporting an enthalpy change.

Worked example

Reading three enthalpy levels

An enthalpy diagram places reactants at 40 kJ/mol, the peak at 110 kJ/mol, and products at 10 kJ/mol. Find both activation energies and ΔH\Delta HΔH.
  1. 1
    Forward activation energy: 110−40=70 kJ mol−1110-40=70\ \mathrm{kJ\,mol^{-1}}110−40=70 kJmol−1.
  2. 2
    Reverse activation energy: 110−10=100 kJ mol−1110-10=100\ \mathrm{kJ\,mol^{-1}}110−10=100 kJmol−1.
  3. 3
    Reaction enthalpy: ΔH=10−40=−30 kJ mol−1\Delta H=10-40=-30\ \mathrm{kJ\,mol^{-1}}ΔH=10−40=−30 kJmol−1.

Answer: The forward and reverse activation energies are 70 kJ/mol and 100 kJ/mol. ΔH=−30 kJ mol−1\Delta H=-30\ \mathrm{kJ\,mol^{-1}}ΔH=−30 kJmol−1, so the forward reaction is exothermic.

The reverse barrier is larger here because the products lie below the reactants. Reversing the reaction swaps the starting and ending levels. It also reverses the sign of ΔH\Delta HΔH, but the peak stays at the same level for this pathway.

Key terms · tap one for its definition

energy barrier

The forward energy barrier is the vertical difference between the reactant level and the pathway’s peak.

reverse barrier

The reverse barrier is the vertical difference between the product level and the pathway’s peak.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[2 marks]

    Identify what each axis of an energy diagram represents.

    Show mark schemeHide mark scheme

    Model answer

    The vertical axis represents energy, and the horizontal axis represents reaction progress.

    • 1 mark for identifying energy on the vertical axis
    • 1 mark for identifying reaction progress on the horizontal axis
  2. 2.Describe[3 marks]

    Describe how to label reactants, products, and forward activation energy on a reaction pathway.

    Show mark schemeHide mark scheme

    Model answer

    Label the starting level as reactants and the ending level as products. Mark forward activation energy vertically from the reactant level to the peak.

    • 1 mark for labeling the starting level as reactants
    • 1 mark for labeling the ending level as products
    • 1 mark for measuring forward activation energy vertically from the reactant level to the peak
  3. 3.Explain[3 marks]

    Explain how an enthalpy diagram shows an exothermic reaction and why the peak does not determine its enthalpy change.

    Show mark schemeHide mark scheme

    Model answer

    Products lie below reactants, so product enthalpy minus reactant enthalpy is negative. The peak sets the activation energy, not the overall enthalpy change.

    • 1 mark for stating that products lie below reactants
    • 1 mark for linking those levels to a negative enthalpy change
    • 1 mark for distinguishing the peak’s activation energy from the overall enthalpy change
  4. 4.Calculate[3 marks]

    Calculate both activation energies and ΔH\Delta HΔH when reactants are at 40 kJ/mol, the peak at 110 kJ/mol, and products at 10 kJ/mol.

    Show mark schemeHide mark scheme

    Model answer

    The forward activation energy is 110−40=70 kJ mol−1110-40=70\ \mathrm{kJ\,mol^{-1}}110−40=70 kJmol−1. The reverse activation energy is 110−10=100 kJ mol−1110-10=100\ \mathrm{kJ\,mol^{-1}}110−10=100 kJmol−1. ΔH=10−40=−30 kJ mol−1\Delta H=10-40=-30\ \mathrm{kJ\,mol^{-1}}ΔH=10−40=−30 kJmol−1.

    • 1 mark for calculating the forward activation energy as 70 kJ/mol
    • 1 mark for calculating the reverse activation energy as 100 kJ/mol
    • 1 mark for calculating the enthalpy change as −30 kJ/mol
  5. 5.Predict[2 marks]

    Predict how a catalyst changes the pathway and the reactant and product levels.

    Show mark schemeHide mark scheme

    Model answer

    A catalyst provides a different pathway with lower activation energy. The reactant and product energy levels stay the same.

    • 1 mark for predicting a different pathway with a lower activation energy
    • 1 mark for stating that reactant and product energy levels remain unchanged

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A reaction pathway begins at one horizontal energy level and ends at another. Which labels belong at the beginning and end, respectively?
Show answer and explanation

Answer: B · Worked explanation

The left-hand starting level represents the reactants, and the right-hand ending level represents the products. The transition state is located at the pathway’s peak between these levels, rather than at either endpoint.
3.

Easy·State[1 mark]

On an enthalpy diagram, the products are at a higher enthalpy than the reactants. What can be concluded about the forward reaction?
Show answer and explanation

Answer: A · Worked explanation

Reaction enthalpy is product enthalpy minus reactant enthalpy, so products at a higher level give a positive ΔH\Delta HΔH. A positive enthalpy change identifies an endothermic forward reaction; the peak height does not determine this sign.
4.

Easy·Identify[1 mark]

Which pair of energy levels should be compared to determine the sign of ΔH\Delta HΔH on an enthalpy diagram?
Show answer and explanation

Answer: D · Worked explanation

The sign of ΔH\Delta HΔH comes from subtracting the reactant enthalpy from the product enthalpy. The peak is used when determining an activation-energy barrier, so comparing the peak with either endpoint does not establish the sign of the overall enthalpy change.
5.

Medium·Determine[2 marks]

An enthalpy diagram has reactants at 25 kJ mol−125\,\text{kJ mol}^{-1}25kJ mol−1, a peak at 85 kJ mol−185\,\text{kJ mol}^{-1}85kJ mol−1, and products at 55 kJ mol−155\,\text{kJ mol}^{-1}55kJ mol−1. Determine the forward activation energy and ΔH\Delta HΔH.
Show answer and explanation

Answer: D · Worked explanation

The forward activation energy is the peak minus the reactant level: 85−25=60 kJ mol−185-25=60\,\text{kJ mol}^{-1}85−25=60kJ mol−1. The enthalpy change is the product level minus the reactant level: 55−25=+30 kJ mol−155-25=+30\,\text{kJ mol}^{-1}55−25=+30kJ mol−1. The tempting negative sign would incorrectly treat the reactants as higher than the products.
6.

Medium·Calculate[2 marks]

For a reaction pathway, the reactants are at 12 kJ mol−112\,\text{kJ mol}^{-1}12kJ mol−1, the peak is at 72 kJ mol−172\,\text{kJ mol}^{-1}72kJ mol−1, and the products are at 32 kJ mol−132\,\text{kJ mol}^{-1}32kJ mol−1. What is the reverse activation energy?
Show answer and explanation

Answer: D · Worked explanation

For the reverse reaction, the products are the starting level, so subtract their energy from the peak: 72−32=40 kJ mol−172-32=40\,\text{kJ mol}^{-1}72−32=40kJ mol−1. The value 60 kJ mol−160\,\text{kJ mol}^{-1}60kJ mol−1 is the forward barrier, measured from the reactant level rather than the product level.
7.

Medium·Deduce[2 marks]

An enthalpy diagram places the products 18 kJ mol−118\,\text{kJ mol}^{-1}18kJ mol−1 below the reactants, while the peak is 47 kJ mol−147\,\text{kJ mol}^{-1}47kJ mol−1 above the reactants. Deduce the reaction enthalpy and the reaction type.
Show answer and explanation

Answer: D · Worked explanation

Because the product level is 18 kJ mol−118\,\text{kJ mol}^{-1}18kJ mol−1 below the reactant level, product minus reactant gives ΔH=−18 kJ mol−1\Delta H=-18\,\text{kJ mol}^{-1}ΔH=−18kJ mol−1. A negative enthalpy change means the reaction is exothermic. The peak’s 47 kJ mol−147\,\text{kJ mol}^{-1}47kJ mol−1 difference describes the forward barrier, not ΔH\Delta HΔH.
8.

Medium·Determine[2 marks]

A student draws a vertical arrow from the reactant level upward to the pathway’s peak and another from the product level upward to the same peak. Which quantities do these arrows represent, respectively?
Show answer and explanation

Answer: B · Worked explanation

The arrow from the reactant level to the peak measures the forward activation energy. The arrow from the product level to that same peak measures the reverse activation energy. Reaction enthalpy instead compares the product and reactant levels directly, without using the peak.
9.

Medium·Compare[2 marks]

On the same enthalpy diagram, reactants are at 5 kJ mol−15\,\text{kJ mol}^{-1}5kJ mol−1, the peak is at 65 kJ mol−165\,\text{kJ mol}^{-1}65kJ mol−1, and products are at 20 kJ mol−120\,\text{kJ mol}^{-1}20kJ mol−1. Compare the forward and reverse activation energies.
Show answer and explanation

Answer: B · Worked explanation

The forward barrier is 65−5=60 kJ mol−165-5=60\,\text{kJ mol}^{-1}65−5=60kJ mol−1, measured from the reactants to the peak. The reverse barrier is 65−20=45 kJ mol−165-20=45\,\text{kJ mol}^{-1}65−20=45kJ mol−1, measured from the products to the peak. The two barriers differ because the reactant and product levels are not equal.
10.

Hard·Deduce[2 marks]

A reaction has ΔH=−24 kJ mol−1\Delta H=-24\,\text{kJ mol}^{-1}ΔH=−24kJ mol−1 and a forward activation energy of 58 kJ mol−158\,\text{kJ mol}^{-1}58kJ mol−1. Determine its reverse activation energy for the same pathway.
Show answer and explanation

Answer: D · Worked explanation

Set the reactant level to 0 for convenience, so the product level is −24 kJ mol−1-24\,\text{kJ mol}^{-1}−24kJ mol−1. The peak is 58 kJ mol−158\,\text{kJ mol}^{-1}58kJ mol−1 above the reactants, making the reverse barrier 58−(−24)=82 kJ mol−158-(-24)=82\,\text{kJ mol}^{-1}58−(−24)=82kJ mol−1. Subtracting the magnitude of ΔH\Delta HΔH would give the wrong direction for this exothermic reaction.

Keep going

Next topic6.3 Heat transfer and thermal equilibriumPrevious topic6.1 Endothermic and exothermic processes

More in Unit 6 · Thermochemistry

  1. 6.1Endothermic and exothermic processesNotes · 10 questions
  2. 6.2Energy diagramsNotes · 10 questions
  3. 6.3Heat transfer and thermal equilibriumNotes · 10 questions
  4. 6.4Heat capacity and calorimetryNotes · 10 questions
  5. 6.5Energy of phase changesNotes · 10 questions
  6. 6.6Introduction to enthalpy of reactionNotes · 10 questions
  7. 6.7Bond enthalpiesNotes · 10 questions
  8. 6.8Enthalpy of formationNotes · 10 questions
  9. 6.9Hess's lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1An energy diagram tracks energy as a reaction proceeds
  2. 2The peak shows the activation energy barrier
  3. 3Starting and ending heights show the energy change
  4. 4Vertical differences give both barriers and enthalpy change
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe