Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›6 Thermochemistry
  4. ›6.9 Hess's law

AP Chemistry · Unit 6 · Thermochemistry

6.9 Hess's law

State Hess’s law and use chemical equations to calculate an overall enthalpy change.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Enthalpy change depends only on the starting and ending states
  1. 1Enthalpy change depends only on the starting and ending states
  2. 2Equation changes require matching enthalpy changes
  3. 3Adding adjusted steps gives the target enthalpy change
  4. 4The final equation checks the enthalpy calculation
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Enthalpy change depends only on the starting and ending states

Hess’s law states that a reaction’s overall enthalpy change is independent of its pathway. The reactants and products must have the same physical states on every pathway. Enthalpy is a state function: its change depends on the initial and final states, not the intermediate steps.

This matters because an overall reaction may be difficult to measure directly. If its equation can be built from reactions with known enthalpy changes, those changes can be added. The sum gives the overall enthalpy change for the target reaction.

Figure 1. A direct route and a route through an intermediate give the same total enthalpy change.

Key terms · tap one for its definition

Hess’s law

The overall enthalpy change is the same for any pathway between the same initial and final states.

state function

A property whose change depends only on its initial and final states.

overall enthalpy change

The enthalpy difference between the products and reactants of the combined reaction.

Part 1 done

2

Part 2 of 4: Equation changes require matching enthalpy changes

Treat each chemical equation and its reaction enthalpy as a pair. Change both together before adding equations. To reverse a reaction, switch its reactants and products and change the sign of its enthalpy change. To scale a reaction, multiply every coefficient and its enthalpy change by the same number.

Add the adjusted equations. Then cancel any substance appearing on both sides in equal amounts. A substance may cancel only when its chemical formula and physical state match. The uncanceled substances must form the target equation, including its coefficients and states.

Common mistake

Do not change a coefficient without changing the enthalpy change by the same factor.

Key terms · tap one for its definition

reaction enthalpy

The enthalpy change for a chemical reaction with specified coefficients and physical states.

reverse a reaction

To exchange reactants and products, which changes the sign of the reaction enthalpy.

scale a reaction

To multiply every coefficient and the reaction enthalpy by the same factor.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the statement that expresses Hess’s law.
Show answer and explanation

Answer: A · Worked explanation

Hess’s law states that the overall enthalpy change is the same for any pathway between the same initial and final states. The option claiming the pathway determines the enthalpy change reverses this idea; physical states must also match when comparing pathways.
3

Part 3 of 4: Adding adjusted steps gives the target enthalpy change

Work backward from the target equation. Find a given step that places each needed substance on the correct side. Reverse or scale steps as needed. An intermediate appears during the combined pathway but not in the target equation. It must cancel when the adjusted equations are added.

Worked example

Find an enthalpy change using two steps

Find ΔH\Delta HΔH for C(graphite)+12O2(g)→CO(g)\mathrm{C(graphite)+\tfrac12 O_2(g)\rightarrow CO(g)}C(graphite)+21​O2​(g)→CO(g). Given C(graphite)+O2(g)→CO2(g)\mathrm{C(graphite)+O_2(g)\rightarrow CO_2(g)}C(graphite)+O2​(g)→CO2​(g), ΔH=−393.5 kJ\Delta H=-393.5\ \mathrm{kJ}ΔH=−393.5 kJ; and CO(g)+12O2(g)→CO2(g)\mathrm{CO(g)+\tfrac12 O_2(g)\rightarrow CO_2(g)}CO(g)+21​O2​(g)→CO2​(g), ΔH=−283.0 kJ\Delta H=-283.0\ \mathrm{kJ}ΔH=−283.0 kJ.
  1. 1
    Keep the first equation: ΔH1=−393.5 kJ\Delta H_1=-393.5\ \mathrm{kJ}ΔH1​=−393.5 kJ.
  2. 2
    Reverse the second: CO2(g)→CO(g)+12O2(g)\mathrm{CO_2(g)\rightarrow CO(g)+\tfrac12 O_2(g)}CO2​(g)→CO(g)+21​O2​(g); ΔH2=+283.0 kJ\Delta H_2=+283.0\ \mathrm{kJ}ΔH2​=+283.0 kJ.
  3. 3
    Add the equations. Cancel CO2(g)\mathrm{CO_2(g)}CO2​(g) and 12O2(g)\mathrm{\tfrac12 O_2(g)}21​O2​(g) from both sides.
  4. 4
    Add the enthalpy changes: ΔH=−393.5+283.0=−110.5 kJ\Delta H=-393.5+283.0=-110.5\ \mathrm{kJ}ΔH=−393.5+283.0=−110.5 kJ.

Answer: For the target reaction as written, ΔH=−110.5 kJ\Delta H=-110.5\ \mathrm{kJ}ΔH=−110.5 kJ.

Key terms · tap one for its definition

target equation

The chemical equation whose enthalpy change must be found.

intermediate

A substance formed in one step and consumed in another, so it cancels from the combined equation.

Part 3 done

4

Part 4 of 4: The final equation checks the enthalpy calculation

The arithmetic is valid only if the combined equation matches the target exactly. Check each stoichiometric coefficient and each physical state. Then check that all unwanted substances cancel. If a substance remains on the wrong side, reconsider which step to reverse.

Report the enthalpy change for the reaction as written. Reversing the final equation reverses its sign. Multiplying the final equation also multiplies its enthalpy change. For example, doubling a reaction with ΔH=−110.5 kJ\Delta H=-110.5\ \mathrm{kJ}ΔH=−110.5 kJ gives ΔH=−221.0 kJ\Delta H=-221.0\ \mathrm{kJ}ΔH=−221.0 kJ.

Exam tip

Show adjusted equations before adding enthalpy changes. This makes cancellations and sign changes clear.

Key terms · tap one for its definition

stoichiometric coefficient

A number before a chemical formula that specifies its amount relative to other substances in the equation.

physical state

The solid, liquid, gas, or dissolved form of a substance in a chemical equation.

enthalpy change

The difference between final and initial enthalpy for a process at constant pressure.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State Hess’s law and why it helps determine reaction enthalpy.

    Show mark schemeHide mark scheme

    Model answer

    The overall enthalpy change is independent of the pathway between the same initial and final states. Known step enthalpies can therefore be added to find an overall reaction enthalpy.

    • 1 mark for stating that enthalpy change is independent of pathway between the same initial and final states
    • 1 mark for stating that known step enthalpies can be combined to find an overall reaction enthalpy
  2. 2.Describe[2 marks]

    Describe how reversing and doubling a reaction affect its enthalpy change.

    Show mark schemeHide mark scheme

    Model answer

    Reversing a reaction changes the sign of its enthalpy change. Doubling all coefficients doubles its enthalpy change.

    • 1 mark for stating that reversing a reaction changes the sign of its enthalpy change
    • 1 mark for stating that doubling every coefficient doubles its enthalpy change
  3. 3.Calculate[3 marks]

    Calculate ΔH\Delta HΔH for A→C\mathrm{A\rightarrow C}A→C, given A→B\mathrm{A\rightarrow B}A→B with ΔH=+45 kJ\Delta H=+45\ \mathrm{kJ}ΔH=+45 kJ and B→C\mathrm{B\rightarrow C}B→C with ΔH=−70 kJ\Delta H=-70\ \mathrm{kJ}ΔH=−70 kJ.

    Show mark schemeHide mark scheme

    Model answer

    Add the equations and cancel B\mathrm{B}B. The result is A→C\mathrm{A\rightarrow C}A→C, with ΔH=+45−70=−25 kJ\Delta H=+45-70=-25\ \mathrm{kJ}ΔH=+45−70=−25 kJ.

    • 1 mark for combining the given equations so that B\mathrm{B}B cancels
    • 1 mark for adding the enthalpy changes as +45−70+45-70+45−70
    • 1 mark for giving ΔH=−25 kJ\Delta H=-25\ \mathrm{kJ}ΔH=−25 kJ
  4. 4.Calculate[4 marks]

    Calculate ΔH\Delta HΔH for 2X→2Z\mathrm{2X\rightarrow 2Z}2X→2Z, given X→Y\mathrm{X\rightarrow Y}X→Y with ΔH=+12 kJ\Delta H=+12\ \mathrm{kJ}ΔH=+12 kJ and Z→Y\mathrm{Z\rightarrow Y}Z→Y with ΔH=+30 kJ\Delta H=+30\ \mathrm{kJ}ΔH=+30 kJ.

    Show mark schemeHide mark scheme

    Model answer

    Reverse the second equation to give Y→Z\mathrm{Y\rightarrow Z}Y→Z with ΔH=−30 kJ\Delta H=-30\ \mathrm{kJ}ΔH=−30 kJ. Adding it to the first gives X→Z\mathrm{X\rightarrow Z}X→Z with ΔH=12−30=−18 kJ\Delta H=12-30=-18\ \mathrm{kJ}ΔH=12−30=−18 kJ. Double the equation and enthalpy change. For 2X→2Z\mathrm{2X\rightarrow 2Z}2X→2Z, ΔH=−36 kJ\Delta H=-36\ \mathrm{kJ}ΔH=−36 kJ.

    • 1 mark for reversing Z→Y\mathrm{Z\rightarrow Y}Z→Y to give Y→Z\mathrm{Y\rightarrow Z}Y→Z
    • 1 mark for changing its enthalpy change to −30 kJ-30\ \mathrm{kJ}−30 kJ
    • 1 mark for adding the steps to obtain X→Z\mathrm{X\rightarrow Z}X→Z with ΔH=−18 kJ\Delta H=-18\ \mathrm{kJ}ΔH=−18 kJ
    • 1 mark for doubling the enthalpy change to obtain −36 kJ-36\ \mathrm{kJ}−36 kJ
  5. 5.Explain[2 marks]

    Explain two equation checks needed before accepting a Hess’s law result.

    Show mark schemeHide mark scheme

    Model answer

    The combined reactants, products, coefficients, and physical states must match the target equation. Any intermediate must cancel from the combined equation.

    • 1 mark for checking that the combined equation matches the target substances, coefficients, and physical states
    • 1 mark for checking that intermediates cancel from the combined equation

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State why Hess’s law is useful when a reaction’s enthalpy change is difficult to measure directly.
Show answer and explanation

Answer: C · Worked explanation

If known reactions can be combined to make the target equation, their adjusted enthalpy changes can be added to find the overall value. Ignoring physical states is not valid, because states must match for substances to cancel.
3.

Easy·Identify[1 mark]

A substance is formed in one adjusted equation and consumed in another. Identify its role in the combined reaction if it does not appear in the target equation.
Show answer and explanation

Answer: D · Worked explanation

A substance formed in one step and consumed in another is an intermediate; if it is absent from the target equation, it should cancel when the adjusted equations are added. It does not need a separate enthalpy change assigned to it.
4.

Easy·Identify[1 mark]

Which adjustment to a reaction equation requires changing the sign of its reaction enthalpy?
Show answer and explanation

Answer: C · Worked explanation

Reversing a reaction exchanges its reactants and products, so its reaction enthalpy changes sign. Doubling coefficients instead doubles the enthalpy change, while cancellation is performed after adjusted equations are added.
5.

Medium·Determine[2 marks]

Determine the equation and enthalpy change obtained by adding 2M(g)→N(g)\mathrm{2M(g)\rightarrow N(g)}2M(g)→N(g) with ΔH=−40 kJ\Delta H=-40\ \mathrm{kJ}ΔH=−40 kJ to the reversed equation N(g)→M(g)\mathrm{N(g)\rightarrow M(g)}N(g)→M(g) originally written with ΔH=−15 kJ\Delta H=-15\ \mathrm{kJ}ΔH=−15 kJ.
Show answer and explanation

Answer: B · Worked explanation

Reversing the second equation gives M(g)→N(g)\mathrm{M(g)\rightarrow N(g)}M(g)→N(g) with ΔH=+15 kJ\Delta H=+15\ \mathrm{kJ}ΔH=+15 kJ. Adding it to the first gives 3M(g)→2N(g)\mathrm{3M(g)\rightarrow 2N(g)}3M(g)→2N(g) with ΔH=−40+15=−25 kJ\Delta H=-40+15=-25\ \mathrm{kJ}ΔH=−40+15=−25 kJ. No substances cancel.
6.

Medium·Calculate[2 marks]

Calculate the enthalpy change when P(s)+O2(g)→PO2(g)\mathrm{P(s)+O_2(g)\rightarrow PO_2(g)}P(s)+O2​(g)→PO2​(g) with ΔH=−300 kJ\Delta H=-300\ \mathrm{kJ}ΔH=−300 kJ is scaled to give 2P(s)+2O2(g)→2PO2(g)\mathrm{2P(s)+2O_2(g)\rightarrow 2PO_2(g)}2P(s)+2O2​(g)→2PO2​(g).
Show answer and explanation

Answer: A · Worked explanation

Every coefficient is multiplied by two, so the reaction enthalpy must also be multiplied by two: 2(−300 kJ)=−600 kJ2(-300\ \mathrm{kJ})=-600\ \mathrm{kJ}2(−300 kJ)=−600 kJ. Keeping the enthalpy change at −300 kJ-300\ \mathrm{kJ}−300 kJ would fail to scale the equation and enthalpy together.
7.

Medium·Calculate[2 marks]

Calculate ΔH\Delta HΔH for R(g)+S(g)→T(g)\mathrm{R(g)+S(g)\rightarrow T(g)}R(g)+S(g)→T(g) using R(g)+2S(g)→U(g)\mathrm{R(g)+2S(g)\rightarrow U(g)}R(g)+2S(g)→U(g), ΔH=−80 kJ\Delta H=-80\ \mathrm{kJ}ΔH=−80 kJ, and U(g)→S(g)+T(g)\mathrm{U(g)\rightarrow S(g)+T(g)}U(g)→S(g)+T(g), ΔH=+25 kJ\Delta H=+25\ \mathrm{kJ}ΔH=+25 kJ.
Show answer and explanation

Answer: A · Worked explanation

Adding the equations cancels U(g)\mathrm{U(g)}U(g) and one S(g)\mathrm{S(g)}S(g), giving the target R(g)+S(g)→T(g)\mathrm{R(g)+S(g)\rightarrow T(g)}R(g)+S(g)→T(g). The enthalpies add to −80+25=−55 kJ-80+25=-55\ \mathrm{kJ}−80+25=−55 kJ. The value −105 kJ-105\ \mathrm{kJ}−105 kJ comes from incorrectly treating the second step as if it needed reversal.
8.

Medium·Determine[2 marks]

Determine ΔH\Delta HΔH for 2A(s)→B(g)\mathrm{2A(s)\rightarrow B(g)}2A(s)→B(g) from these steps: A(s)→C(g)\mathrm{A(s)\rightarrow C(g)}A(s)→C(g), ΔH=+18 kJ\Delta H=+18\ \mathrm{kJ}ΔH=+18 kJ; B(g)→2C(g)\mathrm{B(g)\rightarrow 2C(g)}B(g)→2C(g), ΔH=−10 kJ\Delta H=-10\ \mathrm{kJ}ΔH=−10 kJ.
Show answer and explanation

Answer: B · Worked explanation

Double the first step to obtain 2A(s)→2C(g)\mathrm{2A(s)\rightarrow 2C(g)}2A(s)→2C(g) with ΔH=+36 kJ\Delta H=+36\ \mathrm{kJ}ΔH=+36 kJ. Reverse the second step to obtain 2C(g)→B(g)\mathrm{2C(g)\rightarrow B(g)}2C(g)→B(g) with ΔH=+10 kJ\Delta H=+10\ \mathrm{kJ}ΔH=+10 kJ; canceling 2C(g)\mathrm{2C(g)}2C(g) gives the target and 36+10=+46 kJ36+10=+46\ \mathrm{kJ}36+10=+46 kJ. The tempting +26 kJ+26\ \mathrm{kJ}+26 kJ fails to reverse the second step’s sign.
9.

Medium·Deduce[2 marks]

Deduce whether the following two equations can be added to give the target X(g)→Z(g)\mathrm{X(g)\rightarrow Z(g)}X(g)→Z(g) without any adjustment: X(g)→Y(g)\mathrm{X(g)\rightarrow Y(g)}X(g)→Y(g) and Y(l)→Z(g)\mathrm{Y(l)\rightarrow Z(g)}Y(l)→Z(g).
Show answer and explanation

Answer: B · Worked explanation

The equations cannot be added as written to produce the target because Y(g)\mathrm{Y(g)}Y(g) and Y(l)\mathrm{Y(l)}Y(l) have different physical states and do not cancel. Matching the chemical formula alone is insufficient; treating the two forms as interchangeable is the tempting mistake.
10.

Hard·Determine[2 marks]

Determine ΔH\Delta HΔH for 2J(g)+K(g)→2L(g)\mathrm{2J(g)+K(g)\rightarrow 2L(g)}2J(g)+K(g)→2L(g) using J(g)+K(g)→M(g)\mathrm{J(g)+K(g)\rightarrow M(g)}J(g)+K(g)→M(g), ΔH=−35 kJ\Delta H=-35\ \mathrm{kJ}ΔH=−35 kJ, and M(g)+J(g)→2L(g)\mathrm{M(g)+J(g)\rightarrow 2L(g)}M(g)+J(g)→2L(g), ΔH=+11 kJ\Delta H=+11\ \mathrm{kJ}ΔH=+11 kJ.
Show answer and explanation

Answer: C · Worked explanation

Adding the steps cancels M(g)\mathrm{M(g)}M(g) and gives 2J(g)+K(g)→2L(g)\mathrm{2J(g)+K(g)\rightarrow 2L(g)}2J(g)+K(g)→2L(g). Their enthalpy changes add to −35+11=−24 kJ-35+11=-24\ \mathrm{kJ}−35+11=−24 kJ.

Keep going

Next topic7.1 Introduction to equilibriumPrevious topic6.8 Enthalpy of formation

More in Unit 6 · Thermochemistry

  1. 6.1Endothermic and exothermic processesNotes · 10 questions
  2. 6.2Energy diagramsNotes · 10 questions
  3. 6.3Heat transfer and thermal equilibriumNotes · 10 questions
  4. 6.4Heat capacity and calorimetryNotes · 10 questions
  5. 6.5Energy of phase changesNotes · 10 questions
  6. 6.6Introduction to enthalpy of reactionNotes · 10 questions
  7. 6.7Bond enthalpiesNotes · 10 questions
  8. 6.8Enthalpy of formationNotes · 10 questions
  9. 6.9Hess's lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Enthalpy change depends only on the starting and ending states
  2. 2Equation changes require matching enthalpy changes
  3. 3Adding adjusted steps gives the target enthalpy change
  4. 4The final equation checks the enthalpy calculation
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe