Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›6 Thermochemistry
  4. ›6.5 Energy of phase changes

AP Chemistry · Unit 6 · Thermochemistry

6.5 Energy of phase changes

Explain energy changes during phase changes, calculate their heat, and interpret heating curves.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Melting and freezing involve opposite energy changes
  1. 1Melting and freezing involve opposite energy changes
  2. 2Boiling and condensation also reverse each other
  3. 3Enthalpy values give the heat of a phase change
  4. 4Heating curves separate warming from phase changes
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Melting and freezing involve opposite energy changes

Melting changes a solid into a liquid as the substance absorbs energy. Particles gain enough energy to move past one another. Some attractions between particles are overcome, but the particles themselves remain intact. At constant pressure, a pure substance melts at a fixed temperature.

Freezing changes a liquid into a solid. The substance releases energy as particle attractions form and motion becomes more restricted. For the same substance and conditions, freezing releases the same amount of heat per mole that melting absorbs. The signs of their enthalpy changes are opposite.

Common mistake

Melting does not break the covalent bonds within water molecules. It changes attractions between molecules.

Key terms · tap one for its definition

Melting

Melting is the endothermic change from solid to liquid.

Freezing

Freezing is the exothermic change from liquid to solid.

Part 1 done

2

Part 2 of 4: Boiling and condensation also reverse each other

Boiling changes a liquid into a gas throughout the liquid. The substance absorbs energy to separate its particles against their attractions. At a given pressure, a pure substance boils at a fixed temperature. That temperature changes when the external pressure changes.

Condensation changes a gas into a liquid. The substance releases energy as particles move closer and attractions form. At the same pressure, condensation releases the same amount of heat per mole that boiling absorbs. Vaporization generally requires more energy per mole than melting for the same substance.

Exam tip

Name the direction of the phase change before assigning a sign to its enthalpy change.

Key terms · tap one for its definition

Boiling

Boiling is vaporization throughout a liquid when its vapor pressure equals the external pressure.

Condensation

Condensation is the exothermic change from gas to liquid.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the phase change in which a substance releases energy as gas particles move closer together and attractions form.
Show answer and explanation

Answer: D · Worked explanation

Condensation changes a gas into a liquid, and energy is released as particles move closer and attractions form. Freezing also releases energy, but it changes a liquid into a solid rather than a gas into a liquid.
3

Part 3 of 4: Enthalpy values give the heat of a phase change

The molar enthalpy of fusion is the heat absorbed when one mole melts at constant pressure. The molar enthalpy of vaporization is the corresponding value for boiling. For a phase change at constant pressure, calculate the substance's heat with q=nΔHphaseq=n\Delta H_{\mathrm{phase}}q=nΔHphase​. Here, nnn is the amount in moles. Use a positive enthalpy for melting or boiling, and a negative value for the reverse change.

Worked example

Heat released by condensation

Find the heat released when 2.00 mol of water vapor condenses. Water's molar enthalpy of vaporization is 40.7 kJ mol−140.7\,\mathrm{kJ\,mol^{-1}}40.7kJmol−1 at the stated conditions.
  1. 1
    Reverse the sign for condensation: ΔHcond=−40.7 kJ mol−1\Delta H_{\mathrm{cond}}=-40.7\,\mathrm{kJ\,mol^{-1}}ΔHcond​=−40.7kJmol−1.
  2. 2
    Substitute: q=(2.00 mol)(−40.7 kJ mol−1)q=(2.00\,\mathrm{mol})(-40.7\,\mathrm{kJ\,mol^{-1}})q=(2.00mol)(−40.7kJmol−1).
  3. 3
    Calculate: q=−81.4 kJq=-81.4\,\mathrm{kJ}q=−81.4kJ.

Answer: The water releases 81.4 kJ of heat; its heat change is −81.4 kJ-81.4\,\mathrm{kJ}−81.4kJ.

Key terms · tap one for its definition

molar enthalpy of fusion

Molar enthalpy of fusion is the heat absorbed per mole during melting at constant pressure.

molar enthalpy of vaporization

Molar enthalpy of vaporization is the heat absorbed per mole during boiling at constant pressure.

Part 3 done

4

Part 4 of 4: Heating curves separate warming from phase changes

A heating curve plots temperature against heat added at constant pressure. Sloped segments show a single phase warming. Added energy increases average particle kinetic energy, so temperature rises. Flat segments show two phases present during melting or boiling. Added energy changes particle arrangements instead, so temperature stays constant until that phase change finishes.

The first flat segment represents melting; the later one represents boiling. A cooling curve runs in the opposite direction. Its flat segments represent condensation and freezing. For each flat segment, the horizontal length represents the heat transferred, if the horizontal axis shows heat. A longer segment means more heat, not a higher temperature.

Figure 1. Slopes show warming within one phase. Flat segments show phase changes while heat continues entering.

Common mistake

A flat segment does not mean heat transfer has stopped. Heat continues to enter or leave during the phase change.

Key term

heating curve

A heating curve shows how a substance's temperature changes as heat is added at constant pressure.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[2 marks]

    Explain why a substance absorbs heat during melting without increasing its temperature.

    Show mark schemeHide mark scheme

    Model answer

    The energy changes attractions between particles during melting. Temperature stays constant while solid and liquid coexist.

    • 1 mark for explaining that added energy changes or overcomes attractions between particles
    • 1 mark for stating that temperature remains constant during the phase change
  2. 2.Compare[3 marks]

    Compare the energy changes during boiling and condensation at the same pressure.

    Show mark schemeHide mark scheme

    Model answer

    Boiling absorbs heat as particles separate. Condensation releases heat as attractions form. For the same amount of substance, the heat changes have equal magnitudes and opposite signs.

    • 1 mark for stating that boiling absorbs heat as particles separate
    • 1 mark for stating that condensation releases heat as attractions form
    • 1 mark for stating that their heat changes have equal magnitudes and opposite signs for the same amount
  3. 3.Calculate[3 marks]

    Calculate the heat change when 0.500 mol of a solid melts. Its molar enthalpy of fusion is 12.0 kJ mol−112.0\,\mathrm{kJ\,mol^{-1}}12.0kJmol−1.

    Show mark schemeHide mark scheme

    Model answer

    Using q=nΔHfusq=n\Delta H_{\mathrm{fus}}q=nΔHfus​, q=(0.500 mol)(12.0 kJ mol−1)=+6.00 kJq=(0.500\,\mathrm{mol})(12.0\,\mathrm{kJ\,mol^{-1}})=+6.00\,\mathrm{kJ}q=(0.500mol)(12.0kJmol−1)=+6.00kJ. The solid absorbs 6.00 kJ.

    • 1 mark for using q=nΔHfusq=n\Delta H_{\mathrm{fus}}q=nΔHfus​
    • 1 mark for substituting 0.500 mol and 12.0 kJ mol−112.0\,\mathrm{kJ\,mol^{-1}}12.0kJmol−1
    • 1 mark for giving +6.00 kJ+6.00\,\mathrm{kJ}+6.00kJ or stating that 6.00 kJ is absorbed
  4. 4.Interpret[3 marks]

    Interpret a sloped segment and a flat segment on a heating curve.

    Show mark schemeHide mark scheme

    Model answer

    A sloped segment shows one phase warming as its temperature rises. A flat segment shows a phase change with two phases present. Heat continues entering, but temperature remains constant.

    • 1 mark for identifying a sloped segment as warming within one phase
    • 1 mark for identifying a flat segment as a phase change with two phases present
    • 1 mark for stating that heat enters during the flat segment without raising temperature
  5. 5.Explain[2 marks]

    Explain the sign and magnitude of the enthalpy change for freezing compared with melting.

    Show mark schemeHide mark scheme

    Model answer

    Freezing releases heat, so its enthalpy change is negative. At the same conditions, its magnitude equals the positive enthalpy change for melting.

    • 1 mark for stating that freezing has a negative enthalpy change because it releases heat
    • 1 mark for stating that freezing and melting have equal enthalpy magnitudes at the same conditions

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify what is overcome primarily when ice melts, while the water molecules themselves remain intact.
Show answer and explanation

Answer: B · Worked explanation

Melting overcomes some attractions between water molecules, allowing the molecules to move past one another while remaining intact. Breaking covalent bonds within water molecules would change the molecules themselves, which is not what happens during a phase change.
3.

Easy·State[1 mark]

At a fixed external pressure, what happens to the temperature of a pure substance while it boils?
Show answer and explanation

Answer: D · Worked explanation

At a given pressure, a pure substance boils at a fixed temperature, so its temperature stays constant while the liquid changes to gas. The heat entering during this interval drives the phase change rather than steadily raising the temperature.
4.

Easy·Determine[1 mark]

A heating curve has a horizontal segment while heat is added. What does a longer horizontal segment indicate if the horizontal axis represents heat transferred?
Show answer and explanation

Answer: C · Worked explanation

The horizontal length represents the amount of heat transferred when heat is on the horizontal axis, so a longer segment indicates more heat absorbed during that phase change. It does not indicate a higher temperature; the temperature stays constant along a flat segment.
5.

Medium·Calculate[2 marks]

A sample of 1.25 mol of liquid boils at the stated pressure. Its molar enthalpy of vaporization is 35.0 kJ mol−135.0\,\mathrm{kJ\,mol^{-1}}35.0kJmol−1. Calculate the heat change for the sample.
Show answer and explanation

Answer: C · Worked explanation

For boiling, use the positive vaporization enthalpy: q=nΔHvap=(1.25 mol)(35.0 kJ mol−1)=+43.8 kJq=n\Delta H_{\mathrm{vap}}=(1.25\,\mathrm{mol})(35.0\,\mathrm{kJ\,mol^{-1}})=+43.8\,\mathrm{kJ}q=nΔHvap​=(1.25mol)(35.0kJmol−1)=+43.8kJ. The value −43.8 kJ-43.8\,\mathrm{kJ}−43.8kJ has the right magnitude but the wrong sign, because boiling absorbs heat rather than releasing it.
6.

Medium·Calculate[2 marks]

A 0.800 mol sample freezes. The molar enthalpy of fusion for the substance is 9.50 kJ mol−19.50\,\mathrm{kJ\,mol^{-1}}9.50kJmol−1. What is the heat change of the sample?
Show answer and explanation

Answer: C · Worked explanation

Freezing is the reverse of melting, so its enthalpy per mole is −9.50 kJ mol−1-9.50\,\mathrm{kJ\,mol^{-1}}−9.50kJmol−1. Thus q=(0.800 mol)(−9.50 kJ mol−1)=−7.60 kJq=(0.800\,\mathrm{mol})(-9.50\,\mathrm{kJ\,mol^{-1}})=-7.60\,\mathrm{kJ}q=(0.800mol)(−9.50kJmol−1)=−7.60kJ. The positive value has the correct magnitude but incorrectly treats freezing as heat absorption.
7.

Medium·Deduce[2 marks]

During a heating experiment, a sample's temperature remains at 78 ∘C78\,^{\circ}\mathrm{C}78∘C while heat continues to enter, and liquid and gas are both present. Deduce what is happening to the sample.
Show answer and explanation

Answer: A · Worked explanation

A constant-temperature interval with liquid and gas present while heat enters identifies boiling. The energy supports the change in particle arrangement rather than increasing average kinetic energy and temperature. Warming a single phase would produce a rising temperature, not this plateau.
8.

Medium·Determine[2 marks]

A substance has a molar enthalpy of vaporization of 30.0 kJ mol−130.0\,\mathrm{kJ\,mol^{-1}}30.0kJmol−1. Determine the heat change when 0.400 mol of its gas condenses.
Show answer and explanation

Answer: A · Worked explanation

Condensation reverses vaporization, so the enthalpy is negative: ΔHcond=−30.0 kJ mol−1\Delta H_{\mathrm{cond}}=-30.0\,\mathrm{kJ\,mol^{-1}}ΔHcond​=−30.0kJmol−1. Then q=(0.400 mol)(−30.0 kJ mol−1)=−12.0 kJq=(0.400\,\mathrm{mol})(-30.0\,\mathrm{kJ\,mol^{-1}})=-12.0\,\mathrm{kJ}q=(0.400mol)(−30.0kJmol−1)=−12.0kJ. The positive value has the right magnitude but wrongly indicates heat absorption.
9.

Medium·Compare[2 marks]

For the same amount of a pure substance at the same pressure, compare the heat changes for melting and subsequent freezing. Which statement is correct?
Show answer and explanation

Answer: A · Worked explanation

Melting absorbs energy, while freezing is the reverse process and releases the same amount for the same quantity at the same conditions. The claim that freezing releases more because the solid is more ordered confuses the direction of the structural change with the magnitude of the energy change.
10.

Hard·Explain[2 marks]

A student claims that boiling at a lower external pressure must require more energy per mole because the boiling temperature is lower. Explain which conclusion is justified by the phase-change information.
Show answer and explanation

Answer: B · Worked explanation

The boiling temperature depends on external pressure, but that fact alone does not determine whether the molar enthalpy of vaporization is larger or smaller. The claim assumes a direct connection between lower boiling temperature and greater energy per mole that is not established here; boiling temperature is not pressure-independent.

Keep going

Next topic6.6 Introduction to enthalpy of reactionPrevious topic6.4 Heat capacity and calorimetry

More in Unit 6 · Thermochemistry

  1. 6.1Endothermic and exothermic processesNotes · 10 questions
  2. 6.2Energy diagramsNotes · 10 questions
  3. 6.3Heat transfer and thermal equilibriumNotes · 10 questions
  4. 6.4Heat capacity and calorimetryNotes · 10 questions
  5. 6.5Energy of phase changesNotes · 10 questions
  6. 6.6Introduction to enthalpy of reactionNotes · 10 questions
  7. 6.7Bond enthalpiesNotes · 10 questions
  8. 6.8Enthalpy of formationNotes · 10 questions
  9. 6.9Hess's lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Melting and freezing involve opposite energy changes
  2. 2Boiling and condensation also reverse each other
  3. 3Enthalpy values give the heat of a phase change
  4. 4Heating curves separate warming from phase changes
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe