Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›6 Thermochemistry
  4. ›6.6 Introduction to enthalpy of reaction

AP Chemistry · Unit 6 · Thermochemistry

6.6 Introduction to enthalpy of reaction

Define reaction enthalpy change, distinguish its signs, and interpret enthalpy values in chemical equations.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Reaction enthalpy compares products with reactants
  1. 1Reaction enthalpy compares products with reactants
  2. 2The sign shows the direction of heat transfer
  3. 3An enthalpy value belongs to its written equation
  4. 4Changing reaction amounts changes the enthalpy value
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Reaction enthalpy compares products with reactants

Enthalpy is a property of a system that includes its internal energy and pressure–volume energy. The reaction enthalpy change, ΔH\Delta HΔH, is the enthalpy of the products minus that of the reactants. We usually report it for a reaction at constant pressure. Under that condition, ΔH\Delta HΔH equals the heat transferred between the reacting system and its surroundings. A reaction value describes the amounts shown by the balanced equation. It is not the enthalpy of one molecule.

Exam tip

State which balanced equation an enthalpy value belongs to. Changing the equation can change the value.

Key terms · tap one for its definition

Enthalpy

Enthalpy is a system property equal to its internal energy plus its pressure multiplied by its volume.

reaction enthalpy change

Reaction enthalpy change is the products’ enthalpy minus the reactants’ enthalpy for a reaction as written.

Part 1 done

2

Part 2 of 4: The sign shows the direction of heat transfer

An exothermic reaction transfers heat from the reacting system to its surroundings. Its products have lower enthalpy than its reactants, so ΔH<0\Delta H<0ΔH<0. An endothermic reaction takes in heat from the surroundings. Its products have higher enthalpy than its reactants, so ΔH>0\Delta H>0ΔH>0. The sign describes the reacting system, not the surroundings. For example, warmer surroundings can indicate heat released by an exothermic reaction. A positive value does not mean the reaction produces heat.

Common mistake

Do not assign the sign from the surroundings’ perspective. Heat leaving the system gives a negative ΔH\Delta HΔH.

Key terms · tap one for its definition

exothermic reaction

An exothermic reaction transfers heat from the reacting system to its surroundings and has a negative enthalpy change.

endothermic reaction

An endothermic reaction takes in heat from the surroundings and has a positive enthalpy change.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the expression that defines the reaction enthalpy change for a reaction as written.
Show answer and explanation

Answer: D · Worked explanation

Reaction enthalpy change is defined as the enthalpy of the products minus the enthalpy of the reactants. This difference refers to the amounts in the balanced equation as written. Subtracting products from reactants reverses the definition and would give the opposite sign.
3

Part 3 of 4: An enthalpy value belongs to its written equation

A thermochemical equation pairs a balanced chemical equation with its enthalpy change. Consider 2H2(g)+O2(g)→2H2O(l)\mathrm{2H_2(g)+O_2(g)\rightarrow 2H_2O(l)}2H2​(g)+O2​(g)→2H2​O(l), ΔH=−572kJ\Delta H=-572 \mathrm{kJ}ΔH=−572kJ. When two moles of liquid water form as written, the system releases 572 kJ of heat at constant pressure. The negative sign identifies heat release. The state symbols matter because changing a substance’s physical state can change ΔH\Delta HΔH. The value applies to the complete reaction as written, not to each mole of water separately.

Figure 1. The enthalpy value applies to the balanced reaction as written. Physical states are part of that reaction.

Key term

thermochemical equation

A thermochemical equation states a balanced reaction, physical states, and the enthalpy change for the reaction as written.

Part 3 done

4

Part 4 of 4: Changing reaction amounts changes the enthalpy value

Reaction enthalpy scales with the amounts in the equation. Dividing every coefficient by two also divides ΔH\Delta HΔH by two. Reversing a reaction exchanges reactants and products. Its enthalpy change has the same magnitude but the opposite sign. These changes let you interpret equations written for different amounts or directions. Keep the physical states unchanged when using a given value.

Worked example

Rewrite an equation for one mole of water

For 2H2(g)+O2(g)→2H2O(l)\mathrm{2H_2(g)+O_2(g)\rightarrow 2H_2O(l)}2H2​(g)+O2​(g)→2H2​O(l), ΔH=−572kJ\Delta H=-572 \mathrm{kJ}ΔH=−572kJ. Find ΔH\Delta HΔH when the equation forms one mole of liquid water.
  1. 1
    Divide every coefficient by two: H2(g)+12O2(g)→H2O(l)\mathrm{H_2(g)+\tfrac{1}{2}O_2(g)\rightarrow H_2O(l)}H2​(g)+21​O2​(g)→H2​O(l).
  2. 2
    Divide the enthalpy change by two: ΔH=−5722=−286kJ\Delta H=\frac{-572}{2}=-286 \mathrm{kJ}ΔH=2−572​=−286kJ.

Answer: For the rewritten reaction, ΔH=−286kJ\Delta H=-286 \mathrm{kJ}ΔH=−286kJ.

Key term

Reversing a reaction

Reversing a reaction exchanges its reactants and products and changes the sign of its enthalpy change.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[3 marks]

    Define the enthalpy change of a reaction and state its relationship to heat at constant pressure.

    Show mark schemeHide mark scheme

    Model answer

    Reaction enthalpy change is the enthalpy of the products minus that of the reactants. It refers to the reaction as written. At constant pressure, it equals the heat transferred between the system and its surroundings.

    • 1 mark for stating products’ enthalpy minus reactants’ enthalpy
    • 1 mark for linking the value to the reaction as written
    • 1 mark for stating that it equals heat transferred at constant pressure
  2. 2.Explain[3 marks]

    Explain why an exothermic reaction has a negative enthalpy change.

    Show mark schemeHide mark scheme

    Model answer

    Heat leaves the reacting system and enters the surroundings. The products therefore have lower enthalpy than the reactants. Products minus reactants gives a negative value.

    • 1 mark for stating that heat leaves the reacting system
    • 1 mark for stating that products have lower enthalpy than reactants
    • 1 mark for linking products minus reactants to a negative value
  3. 3.Interpret[3 marks]

    Interpret 2H2(g)+O2(g)→2H2O(l)\mathrm{2H_2(g)+O_2(g)\rightarrow 2H_2O(l)}2H2​(g)+O2​(g)→2H2​O(l), ΔH=−572kJ\Delta H=-572 \mathrm{kJ}ΔH=−572kJ.

    Show mark schemeHide mark scheme

    Model answer

    The equation forms two moles of liquid water from hydrogen and oxygen gas. For the reaction as written, the system releases 572 kJ of heat at constant pressure.

    • 1 mark for identifying two moles of liquid water as the product amount
    • 1 mark for identifying heat release from the negative sign
    • 1 mark for stating that 572 kJ applies to the reaction as written
  4. 4.Calculate[2 marks]

    Calculate ΔH\Delta HΔH for 2H2O(l)→2H2(g)+O2(g)\mathrm{2H_2O(l)\rightarrow 2H_2(g)+O_2(g)}2H2​O(l)→2H2​(g)+O2​(g) using the enthalpy value above.

    Show mark schemeHide mark scheme

    Model answer

    This equation reverses the given reaction, so the sign changes. ΔH=+572kJ\Delta H=+572 \mathrm{kJ}ΔH=+572kJ.

    • 1 mark for recognizing that reversing the reaction changes the sign
    • 1 mark for giving ΔH=+572kJ\Delta H=+572 \mathrm{kJ}ΔH=+572kJ
  5. 5.Calculate[2 marks]

    Calculate ΔH\Delta HΔH when H2(g)+12O2(g)→H2O(l)\mathrm{H_2(g)+\tfrac{1}{2}O_2(g)\rightarrow H_2O(l)}H2​(g)+21​O2​(g)→H2​O(l) occurs, using the enthalpy value above.

    Show mark schemeHide mark scheme

    Model answer

    The coefficients are half those of the given reaction, so halve its enthalpy change. ΔH=−286kJ\Delta H=-286 \mathrm{kJ}ΔH=−286kJ.

    • 1 mark for halving the enthalpy change because all coefficients are halved
    • 1 mark for giving ΔH=−286kJ\Delta H=-286 \mathrm{kJ}ΔH=−286kJ

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Which description matches an endothermic reaction?
Show answer and explanation

Answer: D · Worked explanation

An endothermic reaction takes in heat from its surroundings, so the reacting system gains enthalpy and has a positive ΔH\Delta HΔH. The tempting choice that pairs heat absorption with a negative value assigns the sign as if heat leaving the system were occurring.
3.

Easy·State[1 mark]

A thermochemical equation includes physical state symbols. What do those symbols specify?
Show answer and explanation

Answer: D · Worked explanation

Physical state symbols identify the states of the reactants and products for the balanced reaction associated with the stated enthalpy change. Changing a substance’s state can change the reaction enthalpy. The value is not thereby converted into an enthalpy change for one molecule.
4.

Easy·Identify[1 mark]

For a thermochemical equation, what amount does its stated enthalpy change describe?
Show answer and explanation

Answer: A · Worked explanation

The enthalpy value belongs to the complete balanced reaction as written, so it applies to the stoichiometric amounts represented by its coefficients. It does not automatically describe one mole of each substance or one molecule. Changing the reaction amounts requires changing the enthalpy value proportionally.
5.

Medium·Deduce[1 mark]

A reaction mixture causes the surrounding water to warm as the reaction proceeds. Deduce the sign of the reaction enthalpy change.
Show answer and explanation

Answer: B · Worked explanation

Warming surroundings indicate that heat was transferred from the reacting system to the surroundings. The system therefore undergoes an exothermic change with ΔH<0\Delta H<0ΔH<0. A positive sign would describe heat entering the system, not the surroundings warming because heat was released.
6.

Medium·Determine[2 marks]

For a reaction as written, the reactants have an enthalpy of 310 kJ310\,\text{kJ}310kJ and the products have an enthalpy of 428 kJ428\,\text{kJ}428kJ. Determine ΔH\Delta HΔH and classify the reaction.
Show answer and explanation

Answer: A · Worked explanation

Use products minus reactants: ΔH=428−310=+118 kJ\Delta H=428-310=+118\,\text{kJ}ΔH=428−310=+118kJ. The positive result means the products have greater enthalpy and the system takes in heat, so the reaction is endothermic. The tempting negative value comes from subtracting products from reactants instead.
7.

Medium·Interpret[2 marks]

A thermochemical equation is 2A(g)+B(g)→3C(l)\mathrm{2A(g)+B(g)\rightarrow 3C(l)}2A(g)+B(g)→3C(l), ΔH=+96 kJ\Delta H=+96\,\text{kJ}ΔH=+96kJ. Interpret the stated value.
Show answer and explanation

Answer: C · Worked explanation

The positive enthalpy change indicates heat enters the reacting system, and the value applies to the reaction amounts as written, which form three moles of liquid C. It is not a per-mole-of-C value; that interpretation would require dividing the stated enthalpy change by three.
8.

Medium·Calculate[2 marks]

The reaction X(g)+2Y(g)→Z(l)\mathrm{X(g)+2Y(g)\rightarrow Z(l)}X(g)+2Y(g)→Z(l) has ΔH=−84 kJ\Delta H=-84\,\text{kJ}ΔH=−84kJ. What is ΔH\Delta HΔH when the equation is written as 2X(g)+4Y(g)→2Z(l)\mathrm{2X(g)+4Y(g)\rightarrow 2Z(l)}2X(g)+4Y(g)→2Z(l)?
Show answer and explanation

Answer: C · Worked explanation

Every coefficient has been multiplied by two, so the reaction occurs on twice the scale and its enthalpy change also doubles: 2(−84)=−168 kJ2(-84)=-168\,\text{kJ}2(−84)=−168kJ. The positive value would result from reversing the reaction, but this equation keeps the same direction.
9.

Medium·Determine[2 marks]

The equation M(s)+N(g)→P(g)\mathrm{M(s)+N(g)\rightarrow P(g)}M(s)+N(g)→P(g) has ΔH=+53 kJ\Delta H=+53\,\text{kJ}ΔH=+53kJ. Determine the enthalpy change for P(g)→M(s)+N(g)\mathrm{P(g)\rightarrow M(s)+N(g)}P(g)→M(s)+N(g).
Show answer and explanation

Answer: B · Worked explanation

The second equation is the reverse of the first, with all coefficients and physical states unchanged. Reversing a reaction changes the sign but not the magnitude, giving ΔH=−53 kJ\Delta H=-53\,\text{kJ}ΔH=−53kJ. Doubling the magnitude would incorrectly treat the reversed equation as having doubled coefficients.
10.

Hard·Deduce[2 marks]

During a reaction, the reacting system absorbs heat from its surroundings. Which conclusion follows about the system’s enthalpy change and the relative enthalpies of products and reactants?
Show answer and explanation

Answer: B · Worked explanation

Heat absorbed by the reacting system corresponds to an endothermic change, so ΔH>0\Delta H>0ΔH>0. Since ΔH\Delta HΔH is the products’ enthalpy minus the reactants’ enthalpy, a positive value means the products have higher enthalpy. The negative-sign choices incorrectly use the surroundings’ perspective or contradict the products-minus-reactants definition.

Keep going

Next topic6.7 Bond enthalpiesPrevious topic6.5 Energy of phase changes

More in Unit 6 · Thermochemistry

  1. 6.1Endothermic and exothermic processesNotes · 10 questions
  2. 6.2Energy diagramsNotes · 10 questions
  3. 6.3Heat transfer and thermal equilibriumNotes · 10 questions
  4. 6.4Heat capacity and calorimetryNotes · 10 questions
  5. 6.5Energy of phase changesNotes · 10 questions
  6. 6.6Introduction to enthalpy of reactionNotes · 10 questions
  7. 6.7Bond enthalpiesNotes · 10 questions
  8. 6.8Enthalpy of formationNotes · 10 questions
  9. 6.9Hess's lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Reaction enthalpy compares products with reactants
  2. 2The sign shows the direction of heat transfer
  3. 3An enthalpy value belongs to its written equation
  4. 4Changing reaction amounts changes the enthalpy value
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe