Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›6 Thermochemistry
  4. ›6.7 Bond enthalpies

AP Chemistry · Unit 6 · Thermochemistry

6.7 Bond enthalpies

Define bond enthalpy, explain bond energy changes, and estimate reaction enthalpy.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Bond enthalpy measures the energy needed to break bonds
  1. 1Bond enthalpy measures the energy needed to break bonds
  2. 2Breaking bonds absorbs energy while forming bonds releases it
  3. 3Bond enthalpies estimate the overall reaction enthalpy
  4. 4A balanced equation determines which bond energies count
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Bond enthalpy measures the energy needed to break bonds

Bond enthalpy is the energy required to break one mole of a specified bond in gaseous molecules. Bond breaking separates bonded atoms, so energy must enter the system. A bond enthalpy is therefore positive for the bond-breaking process. Stronger bonds generally require more energy to break.

A listed average bond enthalpy combines values for the same bond type in different molecules. For example, a carbon–hydrogen bond can have different strengths in different compounds. The average is useful when estimating reaction enthalpy, but it rarely gives an exact result. Bond enthalpies describe bonds in gaseous substances, even when a reaction of interest uses another physical state.

Key terms · tap one for its definition

Bond enthalpy

Bond enthalpy is the energy required to break one mole of a specified bond in gaseous molecules.

average bond enthalpy

Average bond enthalpy combines bond-breaking enthalpies for the same bond type across different gaseous molecules.

Part 1 done

2

Part 2 of 4: Breaking bonds absorbs energy while forming bonds releases it

Bonded atoms have lower potential energy than those same atoms separated. Breaking a bond requires an energy input to overcome the attraction between the atoms. When a bond forms, that attraction lowers potential energy. The energy difference is released to the surroundings.

A reaction involves both changes. Bonds in the reactants break, and bonds in the products form. Its overall energy change depends on the balance between those steps. If forming product bonds releases more energy than breaking reactant bonds requires, the reaction has a negative enthalpy change.

Common mistake

Breaking a bond does not release energy. Energy is released when a bond forms.

Figure 1. Separating bonded atoms requires energy. Bringing the same atoms together releases energy.

Key term

energy input

Energy input is energy supplied to a system to bring about a change, such as breaking a bond.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the bond enthalpy value that describes breaking one mole of C–C bonds in gaseous molecules.
Show answer and explanation

Answer: C · Worked explanation

Bond enthalpy refers to the energy required to break one mole of a specified bond in gaseous molecules. The value applies to bond breaking, not bond formation; forming bonds releases energy. The option describing bonds in a liquid also misses the gaseous-molecule condition in the definition.
3

Part 3 of 4: Bond enthalpies estimate the overall reaction enthalpy

To estimate reaction enthalpy, add the energies needed to break reactant bonds. Then subtract the energies released when product bonds form. Use bond counts from the balanced equation. Count every bond that changes, including repeated bonds in multiple molecules.

For gaseous reactants and products, the estimate is ΔH≈∑(bonds broken)−∑(bonds formed)\Delta H\approx\sum(\text{bonds broken})-\sum(\text{bonds formed})ΔH≈∑(bonds broken)−∑(bonds formed). A negative result means bond formation releases more energy than bond breaking absorbs. A positive result means the reverse. An unchanged bond appears on both sides and cancels from the calculation.

Exam tip

Show separate totals for bonds broken and formed. Keep the subtraction order clear.

Key term

reaction enthalpy

Reaction enthalpy is the enthalpy change for a reaction as represented by its balanced equation.

Part 3 done

4

Part 4 of 4: A balanced equation determines which bond energies count

Consider H2(g)+Cl2(g)→2HCl(g)\mathrm{H_2(g)+Cl_2(g)\rightarrow 2HCl(g)}H2​(g)+Cl2​(g)→2HCl(g). One hydrogen–hydrogen bond and one chlorine–chlorine bond break. Two hydrogen–chlorine bonds form. The coefficient on HCl\mathrm{HCl}HCl matters because it doubles the number of product bonds.

Worked example

Estimate the enthalpy change

Estimate the enthalpy change for H2(g)+Cl2(g)→2HCl(g)\mathrm{H_2(g)+Cl_2(g)\rightarrow 2HCl(g)}H2​(g)+Cl2​(g)→2HCl(g). Use bond enthalpies of 436 kJ mol⁻¹ for H–H, 243 kJ mol⁻¹ for Cl–Cl, and 431 kJ mol⁻¹ for H–Cl.
  1. 1
    Bonds broken: H−H\mathrm{H-H}H−H and Cl−Cl\mathrm{Cl-Cl}Cl−Cl; 436+243=679kJ mol−1436+243=679\mathrm{kJ\,mol^{-1}}436+243=679kJmol−1.
  2. 2
    Bonds formed: two H−Cl\mathrm{H-Cl}H−Cl bonds; 2(431)=862kJ mol−12(431)=862\mathrm{kJ\,mol^{-1}}2(431)=862kJmol−1.
  3. 3
    Subtract: ΔH≈679−862=−183kJ mol−1\Delta H\approx 679-862=-183\mathrm{kJ\,mol^{-1}}ΔH≈679−862=−183kJmol−1.

Answer: The estimated reaction enthalpy is −183kJ mol−1-183\mathrm{kJ\,mol^{-1}}−183kJmol−1 of reaction as written.

This value is an estimate. Average bond enthalpies may differ from the bond energies in these particular molecules.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[2 marks]

    Define bond enthalpy.

    Show mark schemeHide mark scheme

    Model answer

    Bond enthalpy is the energy required to break one mole of a specified bond in gaseous molecules.

    • 1 mark for stating that energy is required to break the bond
    • 1 mark for specifying one mole of bonds in gaseous molecules
  2. 2.Explain[3 marks]

    Explain why breaking a bond requires energy but forming it releases energy.

    Show mark schemeHide mark scheme

    Model answer

    Bonded atoms attract each other. Energy must be supplied to separate them. When they bond again, their potential energy decreases and energy is released.

    • 1 mark for identifying an attraction between bonded atoms
    • 1 mark for explaining that separating the atoms requires energy input
    • 1 mark for explaining that bond formation lowers potential energy and releases energy
  3. 3.Calculate[3 marks]

    Calculate the estimated enthalpy change for H2(g)+Cl2(g)→2HCl(g)\mathrm{H_2(g)+Cl_2(g)\rightarrow 2HCl(g)}H2​(g)+Cl2​(g)→2HCl(g) using 436 kJ mol⁻¹ for H–H, 243 kJ mol⁻¹ for Cl–Cl, and 431 kJ mol⁻¹ for H–Cl.

    Show mark schemeHide mark scheme

    Model answer

    Breaking bonds requires 436+243=679kJ mol−1436+243=679\mathrm{kJ\,mol^{-1}}436+243=679kJmol−1. Forming two H–Cl bonds releases 2(431)=862kJ mol−12(431)=862\mathrm{kJ\,mol^{-1}}2(431)=862kJmol−1. Thus, ΔH≈679−862=−183kJ mol−1\Delta H\approx 679-862=-183\mathrm{kJ\,mol^{-1}}ΔH≈679−862=−183kJmol−1.

    • 1 mark for calculating 679 kJ mol⁻¹ for bonds broken
    • 1 mark for calculating 862 kJ mol⁻¹ for bonds formed
    • 1 mark for subtracting formed from broken to obtain −183 kJ mol⁻¹
  4. 4.Explain[2 marks]

    Explain why a result calculated from average bond enthalpies is an estimate.

    Show mark schemeHide mark scheme

    Model answer

    The strength of a bond type varies between molecules. Average bond enthalpies may therefore differ from the bond energies in the particular reactants and products.

    • 1 mark for stating that a bond type can have different strengths in different molecules
    • 1 mark for linking the use of average values to an approximate result
  5. 5.Predict[2 marks]

    Predict the sign of reaction enthalpy when forming product bonds releases more energy than breaking reactant bonds requires. Justify your prediction.

    Show mark schemeHide mark scheme

    Model answer

    Reaction enthalpy is negative because the energy released by bond formation exceeds the energy absorbed during bond breaking.

    • 1 mark for predicting a negative reaction enthalpy
    • 1 mark for comparing the greater energy released by formation with the energy required for breaking

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify the energy change when two bonded atoms are separated while all other changes are ignored.
Show answer and explanation

Answer: A · Worked explanation

Bonded atoms attract one another, so separating them requires an energy input to overcome that attraction. The claim that energy is released confuses bond breaking with bond formation: bringing atoms together to form a bond releases energy as potential energy decreases.
3.

Easy·State[1 mark]

State what happens to the potential energy of two atoms when they form a bond.
Show answer and explanation

Answer: A · Worked explanation

When a bond forms, the attraction between the atoms lowers their potential energy, and the energy difference is released to the surroundings. The tempting choice that pairs a decrease with energy absorption reverses the energy transfer; energy must be supplied when the atoms are separated, not when the bond forms.
4.

Easy·Identify[1 mark]

Identify the statement that best describes why average bond enthalpies are useful for estimating reaction enthalpy.
Show answer and explanation

Answer: C · Worked explanation

Average bond enthalpies combine values for the same bond type in different gaseous molecules, providing representative values for estimates. They are not exact for every molecule because the strength of a bond type can vary with its molecular environment. They are used for bonds broken and bonds formed.
5.

Medium·Calculate[2 marks]

Calculate the estimated reaction enthalpy for N2(g)+3H2(g)→2NH3(g)\mathrm{N_2(g)+3H_2(g)\rightarrow 2NH_3(g)}N2​(g)+3H2​(g)→2NH3​(g). Use 945 kJ/mol for N≡N, 436 kJ/mol for H–H, and 391 kJ/mol for N–H.
Show answer and explanation

Answer: A · Worked explanation

Breaking one N≡N bond and three H–H bonds requires 945+3(436)=2253945+3(436)=2253945+3(436)=2253 kJ/mol. Forming six N–H bonds releases 6(391)=23466(391)=23466(391)=2346 kJ/mol, so ΔH≈2253−2346=−93\Delta H\approx2253-2346=-93ΔH≈2253−2346=−93 kJ/mol of reaction. The positive value of 93 reverses the subtraction order and therefore gives the wrong sign.
6.

Medium·Determine[2 marks]

Determine the estimated reaction enthalpy for CO(g)+H2(g)→CH2O(g)\mathrm{CO(g)+H_2(g)\rightarrow CH_2O(g)}CO(g)+H2​(g)→CH2​O(g). Use 1072 kJ/mol for C≡O, 436 kJ/mol for H–H, 413 kJ/mol for C–H, and 745 kJ/mol for C=O.
Show answer and explanation

Answer: B · Worked explanation

The reactants contain one C≡O bond and one H–H bond, so breaking them requires 1072+436=15081072+436=15081072+436=1508 kJ/mol. The product has two C–H bonds and one C=O bond, whose total is 2(413)+745=15712(413)+745=15712(413)+745=1571 kJ/mol. Thus ΔH≈1508−1571=−63\Delta H\approx1508-1571=-63ΔH≈1508−1571=−63 kJ/mol; +63 results from subtracting in the opposite order.
7.

Medium·Deduce[2 marks]

Deduce the estimated reaction enthalpy for CH4(g)+Cl2(g)→CH3Cl(g)+HCl(g)\mathrm{CH_4(g)+Cl_2(g)\rightarrow CH_3Cl(g)+HCl(g)}CH4​(g)+Cl2​(g)→CH3​Cl(g)+HCl(g). Use 413 kJ/mol for C–H, 243 kJ/mol for Cl–Cl, 328 kJ/mol for C–Cl, and 431 kJ/mol for H–Cl. Only count bonds that change.
Show answer and explanation

Answer: A · Worked explanation

One C–H bond and one Cl–Cl bond are broken, requiring 413+243=656413+243=656413+243=656 kJ/mol. One C–Cl bond and one H–Cl bond form, releasing 328+431=759328+431=759328+431=759 kJ/mol, so the estimate is 656−759=−103656-759=-103656−759=−103 kJ/mol. Counting all four C–H bonds in methane would be wrong because three remain unchanged and cancel.
8.

Medium·Calculate[2 marks]

Calculate the estimated reaction enthalpy for 2CO(g)+O2(g)→2CO2(g)\mathrm{2CO(g)+O_2(g)\rightarrow 2CO_2(g)}2CO(g)+O2​(g)→2CO2​(g). Use 1072 kJ/mol for C≡O, 498 kJ/mol for O=O, and 799 kJ/mol for C=O. Count each bond in the balanced equation.
Show answer and explanation

Answer: D · Worked explanation

Breaking two C≡O bonds and one O=O bond requires 2(1072)+498=26422(1072)+498=26422(1072)+498=2642 kJ/mol. Forming four C=O bonds releases 4(799)=31964(799)=31964(799)=3196 kJ/mol. Thus ΔH≈2642−3196=−554\Delta H\approx2642-3196=-554ΔH≈2642−3196=−554 kJ/mol of reaction.
9.

Medium·Determine[2 marks]

Determine the estimated reaction enthalpy for H2(g)+Br2(g)→2HBr(g)\mathrm{H_2(g)+Br_2(g)\rightarrow 2HBr(g)}H2​(g)+Br2​(g)→2HBr(g). Use 436 kJ/mol for H–H, 193 kJ/mol for Br–Br, and 366 kJ/mol for H–Br.
Show answer and explanation

Answer: C · Worked explanation

Breaking one H–H and one Br–Br bond requires 436+193=629436+193=629436+193=629 kJ/mol. Forming two H–Br bonds releases 2(366)=7322(366)=7322(366)=732 kJ/mol, giving ΔH≈629−732=−103\Delta H\approx629-732=-103ΔH≈629−732=−103 kJ/mol of reaction. The positive option with the same magnitude results from subtracting the broken-bond total from the formed-bond total.
10.

Hard·Determine[2 marks]

Determine the estimated reaction enthalpy for 2C2H6(g)+7O2(g)→4CO2(g)+6H2O(g)\mathrm{2C_2H_6(g)+7O_2(g)\rightarrow 4CO_2(g)+6H_2O(g)}2C2​H6​(g)+7O2​(g)→4CO2​(g)+6H2​O(g). Use 347 kJ/mol for C–C, 413 kJ/mol for C–H, 498 kJ/mol for O=O, 799 kJ/mol for C=O, and 463 kJ/mol for O–H.
Show answer and explanation

Answer: A · Worked explanation

Breaking two C–C, twelve C–H, and seven O=O bonds requires 2(347)+12(413)+7(498)=91362(347)+12(413)+7(498)=91362(347)+12(413)+7(498)=9136 kJ/mol. Forming eight C=O and twelve O–H bonds releases 8(799)+12(463)=119488(799)+12(463)=119488(799)+12(463)=11948 kJ/mol. Thus ΔH≈9136−11948=−2812\Delta H\approx9136-11948=-2812ΔH≈9136−11948=−2812 kJ/mol of reaction.

Keep going

Next topic6.8 Enthalpy of formationPrevious topic6.6 Introduction to enthalpy of reaction

More in Unit 6 · Thermochemistry

  1. 6.1Endothermic and exothermic processesNotes · 10 questions
  2. 6.2Energy diagramsNotes · 10 questions
  3. 6.3Heat transfer and thermal equilibriumNotes · 10 questions
  4. 6.4Heat capacity and calorimetryNotes · 10 questions
  5. 6.5Energy of phase changesNotes · 10 questions
  6. 6.6Introduction to enthalpy of reactionNotes · 10 questions
  7. 6.7Bond enthalpiesNotes · 10 questions
  8. 6.8Enthalpy of formationNotes · 10 questions
  9. 6.9Hess's lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Bond enthalpy measures the energy needed to break bonds
  2. 2Breaking bonds absorbs energy while forming bonds releases it
  3. 3Bond enthalpies estimate the overall reaction enthalpy
  4. 4A balanced equation determines which bond energies count
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe