Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›6 Thermochemistry
  4. ›6.4 Heat capacity and calorimetry

AP Chemistry · Unit 6 · Thermochemistry

6.4 Heat capacity and calorimetry

Define specific heat capacity, calculate heat transfer, and explain how a calorimeter measures reaction heat.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Specific heat capacity links heat transfer to temperature change
  1. 1Specific heat capacity links heat transfer to temperature change
  2. 2Mass and temperature change determine heat transfer
  3. 3A calorimeter uses temperature change to measure reaction heat
  4. 4Calorimeter assumptions determine how reaction heat is estimated
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Specific heat capacity links heat transfer to temperature change

Specific heat capacity is the heat needed to raise one gram of a substance by one degree Celsius. Its common unit is J g−1 ∘C−1\mathrm{J\,g^{-1}\,^{\circ}C^{-1}}Jg−1∘C−1. Heat, represented by qqq, is energy transferred because of a temperature difference. A substance with a higher specific heat capacity needs more heat for the same mass and temperature rise.

A temperature change is final temperature minus initial temperature: ΔT=Tfinal−Tinitial\Delta T=T_{\mathrm{final}}-T_{\mathrm{initial}}ΔT=Tfinal​−Tinitial​. A rise makes ΔT\Delta TΔT positive; a fall makes it negative. A one-degree Celsius change has the same size as a one-kelvin change. Use consistent units when substituting into a heat equation.

Key terms · tap one for its definition

Specific heat capacity

Specific heat capacity is the heat required to raise one gram of a substance by one degree Celsius.

Heat

Heat is energy transferred between a system and its surroundings because of a temperature difference.

Temperature change

Temperature change is the final temperature minus the initial temperature.

Part 1 done

2

Part 2 of 4: Mass and temperature change determine heat transfer

Calculate heat transfer with q=mcΔTq=mc\Delta Tq=mcΔT. Here, mmm is mass and ccc is specific heat capacity. If mass is in grams, use ccc in J g−1 ∘C−1\mathrm{J\,g^{-1}\,^{\circ}C^{-1}}Jg−1∘C−1. The result is in joules. Positive qqq means the substance gains heat; negative qqq means it loses heat. Calculate the temperature change before multiplying, and keep its sign.

Worked example

Heating a water sample

A 50.0 g water sample warms from 20.0 °C to 25.0 °C. Calculate the heat gained. Use c=4.184 J g−1 ∘C−1c=4.184\ \mathrm{J\,g^{-1}\,^{\circ}C^{-1}}c=4.184 Jg−1∘C−1.
  1. 1
    ΔT=25.0−20.0=5.0 ∘C\Delta T=25.0-20.0=5.0\ ^{\circ}\mathrm{C}ΔT=25.0−20.0=5.0 ∘C
  2. 2
    q=mcΔT=(50.0 g)(4.184 J g−1 ∘C−1)(5.0 ∘C)q=mc\Delta T=(50.0\ \mathrm{g})(4.184\ \mathrm{J\,g^{-1}\,^{\circ}C^{-1}})(5.0\ ^{\circ}\mathrm{C})q=mcΔT=(50.0 g)(4.184 Jg−1∘C−1)(5.0 ∘C)
  3. 3
    q=1046 Jq=1046\ \mathrm{J}q=1046 J

Answer: The water gains approximately 1.0×103 J1.0\times10^3\ \mathrm{J}1.0×103 J of heat.

Exam tip

State which substance your calculated qqq describes. Its sign may differ from the reaction’s sign.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the meaning of specific heat capacity.
Show answer and explanation

Answer: C · Worked explanation

Specific heat capacity describes the heat required for a specified temperature rise in a specified mass: one gram and one degree Celsius. The option mentioning one mole instead describes a molar quantity, while a rate per second is not part of the definition.
3

Part 3 of 4: A calorimeter uses temperature change to measure reaction heat

A calorimeter is an insulated setup used to measure heat transfer. In a common solution calorimeter, reactants mix in a container with a thermometer. Record the initial temperature, then measure the temperature after the reaction. The solution’s mass, specific heat capacity, and temperature change give qsolution=mcΔTq_{\mathrm{solution}}=mc\Delta Tqsolution​=mcΔT.

If heat transfer to the container and surroundings is negligible, energy conservation gives qreaction=−qsolutionq_{\mathrm{reaction}}=-q_{\mathrm{solution}}qreaction​=−qsolution​. A warming solution gains heat, so the reaction releases heat. A cooling solution loses heat, so the reaction takes in heat. Insulation reduces unwanted heat exchange; it does not eliminate it completely.

Figure 1. The thermometer measures the solution’s temperature change. Insulation limits heat exchange with the room.

Key terms · tap one for its definition

Calorimeter

A calorimeter is an insulated setup used to measure heat transfer through a temperature change.

Energy conservation

Energy conservation means heat lost by one part is gained by another when exchange with the surroundings is negligible.

Part 3 done

4

Part 4 of 4: Calorimeter assumptions determine how reaction heat is estimated

The simplest calculation treats the measured solution as the only heat receiver or donor. It often uses water’s specific heat capacity as an approximation for a dilute aqueous solution. That approximation may be unsuitable for a concentrated solution or another liquid. Measure or estimate the total solution mass, rather than using only one reactant’s mass.

The container can also absorb heat. If its calorimeter constant is known, calculate its heat change with qcal=CcalΔTq_{\mathrm{cal}}=C_{\mathrm{cal}}\Delta Tqcal​=Ccal​ΔT. Then use qreaction=−(qsolution+qcal)q_{\mathrm{reaction}}=-(q_{\mathrm{solution}}+q_{\mathrm{cal}})qreaction​=−(qsolution​+qcal​) when exchange with the surroundings is negligible. Heat escaping to the room makes the measured temperature change less representative of the reaction’s heat.

Common mistake

Do not set reaction heat equal to solution heat. Their signs are opposite when other heat transfers are negligible.

Key term

Calorimeter constant

A calorimeter constant is the heat absorbed by a calorimeter per degree of temperature rise.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[2 marks]

    Define specific heat capacity and state a common unit.

    Show mark schemeHide mark scheme

    Model answer

    Specific heat capacity is the heat needed to raise one gram of a substance by one degree Celsius. A common unit is J g−1 ∘C−1\mathrm{J\,g^{-1}\,^{\circ}C^{-1}}Jg−1∘C−1.

    • 1 mark for stating the heat needed for one gram to rise by one degree Celsius
    • 1 mark for giving J g−1 ∘C−1\mathrm{J\,g^{-1}\,^{\circ}C^{-1}}Jg−1∘C−1 as the unit
  2. 2.Calculate[3 marks]

    Calculate the heat lost when 40.0 g of water cools from 30.0 °C to 25.0 °C. Use c=4.184 J g−1 ∘C−1c=4.184\ \mathrm{J\,g^{-1}\,^{\circ}C^{-1}}c=4.184 Jg−1∘C−1.

    Show mark schemeHide mark scheme

    Model answer

    ΔT=25.0−30.0=−5.0 ∘C\Delta T=25.0-30.0=-5.0\ ^{\circ}\mathrm{C}ΔT=25.0−30.0=−5.0 ∘C. Therefore, q=mcΔT=(40.0)(4.184)(−5.0)=−836.8 Jq=mc\Delta T=(40.0)(4.184)(-5.0)=-836.8\ \mathrm{J}q=mcΔT=(40.0)(4.184)(−5.0)=−836.8 J. The water loses approximately 840 J.

    • 1 mark for calculating ΔT=−5.0 ∘C\Delta T=-5.0\ ^{\circ}\mathrm{C}ΔT=−5.0 ∘C
    • 1 mark for substituting the mass, specific heat capacity, and temperature change into q=mcΔTq=mc\Delta Tq=mcΔT
    • 1 mark for giving approximately −840 J-840\ \mathrm{J}−840 J for the water’s heat change
  3. 3.Describe[3 marks]

    Describe how a solution calorimeter estimates the heat of a reaction.

    Show mark schemeHide mark scheme

    Model answer

    Reactants mix in an insulated container. The solution’s temperature change is measured and used with its mass and specific heat capacity to calculate qsolutionq_{\mathrm{solution}}qsolution​. If other heat transfers are negligible, qreaction=−qsolutionq_{\mathrm{reaction}}=-q_{\mathrm{solution}}qreaction​=−qsolution​.

    • 1 mark for describing reactants mixing in an insulated container
    • 1 mark for using the solution’s measured temperature change, mass, and specific heat capacity
    • 1 mark for stating that reaction heat is the negative of solution heat when other heat transfers are negligible
  4. 4.Explain[2 marks]

    Explain why a warming solution indicates that its reaction releases heat.

    Show mark schemeHide mark scheme

    Model answer

    The warming solution gains heat, so its qqq is positive. With negligible other heat transfers, the reaction loses that heat and has negative qqq.

    • 1 mark for stating that the warming solution gains heat
    • 1 mark for explaining that energy conservation makes the reaction’s heat change negative
  5. 5.Explain[2 marks]

    Explain how a known calorimeter constant changes a reaction-heat calculation.

    Show mark schemeHide mark scheme

    Model answer

    Use qcal=CcalΔTq_{\mathrm{cal}}=C_{\mathrm{cal}}\Delta Tqcal​=Ccal​ΔT to include heat absorbed by the calorimeter. Then calculate qreaction=−(qsolution+qcal)q_{\mathrm{reaction}}=-(q_{\mathrm{solution}}+q_{\mathrm{cal}})qreaction​=−(qsolution​+qcal​) if exchange with the surroundings is negligible.

    • 1 mark for calculating calorimeter heat using its constant and temperature change
    • 1 mark for including both solution heat and calorimeter heat with the opposite sign for reaction heat

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State the common unit for specific heat capacity when heat is measured in joules and mass in grams.
Show answer and explanation

Answer: A · Worked explanation

The unit expresses energy required per gram per degree Celsius, so it is joules divided by grams and by degrees Celsius. The option with grams multiplied rather than divided does not represent energy per unit mass, and the other choices place temperature or energy in the denominator incorrectly.
3.

Easy·Determine[1 mark]

A sample cools from 31.0 ∘C31.0\ ^{\circ}\mathrm{C}31.0 ∘C to 24.0 ∘C24.0\ ^{\circ}\mathrm{C}24.0 ∘C. Determine the sign of its temperature change, using ΔT=Tfinal−Tinitial\Delta T=T_{\mathrm{final}}-T_{\mathrm{initial}}ΔT=Tfinal​−Tinitial​.
Show answer and explanation

Answer: B · Worked explanation

The temperature change is final temperature minus initial temperature: 24.0−31.0=−7.0 ∘C24.0-31.0=-7.0\ ^{\circ}\mathrm{C}24.0−31.0=−7.0 ∘C. It is negative because the final temperature is lower. Mass is needed to calculate heat transfer with q=mcΔTq=mc\Delta Tq=mcΔT, but not to determine the sign of ΔT\Delta TΔT.
4.

Easy·Identify[1 mark]

Identify the feature of a calorimeter that helps make a measured temperature change useful for estimating reaction heat.
Show answer and explanation

Answer: C · Worked explanation

Insulation reduces unwanted heat exchange with the room, making the measured temperature change more representative of heat transfer between the reaction and the measured materials. It does not eliminate all heat exchange. A thermometer measures temperature, not mass, and a calorimeter must allow the temperature to change so that heat transfer can be estimated.
5.

Medium·Calculate[2 marks]

A 32.0 g32.0\ \mathrm{g}32.0 g metal sample with specific heat capacity 0.450 J g−1 ∘C−10.450\ \mathrm{J\,g^{-1}\,^{\circ}C^{-1}}0.450 Jg−1∘C−1 warms from 18.0 ∘C18.0\ ^{\circ}\mathrm{C}18.0 ∘C to 43.0 ∘C43.0\ ^{\circ}\mathrm{C}43.0 ∘C. Calculate the heat transferred to the metal.
Show answer and explanation

Answer: A · Worked explanation

The temperature change is 43.0−18.0=25.0 ∘C43.0-18.0=25.0\ ^{\circ}\mathrm{C}43.0−18.0=25.0 ∘C. Substituting gives q=(32.0 g)(0.450 J g−1 ∘C−1)(25.0 ∘C)=+360 Jq=(32.0\ \mathrm{g})(0.450\ \mathrm{J\,g^{-1}\,^{\circ}C^{-1}})(25.0\ ^{\circ}\mathrm{C})=+360\ \mathrm{J}q=(32.0 g)(0.450 Jg−1∘C−1)(25.0 ∘C)=+360 J. The negative result would describe heat lost during cooling, but this metal warms and gains heat.
6.

Medium·Calculate[2 marks]

A 75.0 g75.0\ \mathrm{g}75.0 g liquid sample with c=2.00 J g−1 ∘C−1c=2.00\ \mathrm{J\,g^{-1}\,^{\circ}C^{-1}}c=2.00 Jg−1∘C−1 loses 900 J900\ \mathrm{J}900 J of heat. Determine its temperature change.
Show answer and explanation

Answer: B · Worked explanation

Rearrange q=mcΔTq=mc\Delta Tq=mcΔT to obtain ΔT=q/(mc)\Delta T=q/(mc)ΔT=q/(mc). Thus ΔT=(−900 J)/[(75.0 g)(2.00 J g−1 ∘C−1)]=−6.00 ∘C\Delta T=(-900\ \mathrm{J})/[(75.0\ \mathrm{g})(2.00\ \mathrm{J\,g^{-1}\,^{\circ}C^{-1}})]=-6.00\ ^{\circ}\mathrm{C}ΔT=(−900 J)/[(75.0 g)(2.00 Jg−1∘C−1)]=−6.00 ∘C. The positive value has the wrong sign for a sample that loses heat.
7.

Medium·Deduce[2 marks]

In an insulated solution calorimeter, the solution temperature falls during a reaction. Assuming heat exchange with the container and surroundings is negligible, deduce the sign of qreactionq_{\mathrm{reaction}}qreaction​.
Show answer and explanation

Answer: D · Worked explanation

A falling solution temperature means the solution loses heat, so qsolutionq_{\mathrm{solution}}qsolution​ is negative. With negligible other heat transfers, qreaction=−qsolutionq_{\mathrm{reaction}}=-q_{\mathrm{solution}}qreaction​=−qsolution​, making the reaction heat positive as the reaction absorbs energy.
8.

Medium·Determine[2 marks]

A 120. g120.\ \mathrm{g}120. g aqueous sample warms by 3.50 ∘C3.50\ ^{\circ}\mathrm{C}3.50 ∘C. Estimate its heat change using c=4.184 J g−1 ∘C−1c=4.184\ \mathrm{J\,g^{-1}\,^{\circ}C^{-1}}c=4.184 Jg−1∘C−1.
Show answer and explanation

Answer: C · Worked explanation

Use q=mcΔTq=mc\Delta Tq=mcΔT: (120. g)(4.184 J g−1 ∘C−1)(3.50 ∘C)=1757 J(120.\ \mathrm{g})(4.184\ \mathrm{J\,g^{-1}\,^{\circ}C^{-1}})(3.50\ ^{\circ}\mathrm{C})=1757\ \mathrm{J}(120. g)(4.184 Jg−1∘C−1)(3.50 ∘C)=1757 J, or about +1.76×103 J+1.76\times10^3\ \mathrm{J}+1.76×103 J. The positive sign is required because the sample warms and gains heat; the negative option reverses that sign.
9.

Medium·Explain[2 marks]

A solution calorimeter records an initial temperature of 22.4 ∘C22.4\ ^{\circ}\mathrm{C}22.4 ∘C and a final temperature of 26.1 ∘C26.1\ ^{\circ}\mathrm{C}26.1 ∘C. Assuming negligible heat transfer to the calorimeter and room, explain what the temperature change indicates about the reaction.
Show answer and explanation

Answer: B · Worked explanation

The solution's temperature rises by 3.7 ∘C3.7\ ^{\circ}\mathrm{C}3.7 ∘C, so it gains heat. Under the stated assumption, energy conservation gives qreaction=−qsolutionq_{\mathrm{reaction}}=-q_{\mathrm{solution}}qreaction​=−qsolution​, meaning the reaction releases heat. The tempting claim that both gain heat conflicts with this energy balance when other heat transfers are negligible.
10.

Hard·Determine[2 marks]

A 40.0 g40.0\ \mathrm{g}40.0 g sample with c=0.500 J g−1 ∘C−1c=0.500\ \mathrm{J\,g^{-1}\,^{\circ}C^{-1}}c=0.500 Jg−1∘C−1 cools from 80.0 ∘C80.0\ ^{\circ}\mathrm{C}80.0 ∘C to 30.0 ∘C30.0\ ^{\circ}\mathrm{C}30.0 ∘C. A student reports the heat change as +1000 J+1000\ \mathrm{J}+1000 J. Determine the correct heat change and identify the student's error.
Show answer and explanation

Answer: C · Worked explanation

Here ΔT=30.0−80.0=−50.0 ∘C\Delta T=30.0-80.0=-50.0\ ^{\circ}\mathrm{C}ΔT=30.0−80.0=−50.0 ∘C, so q=(40.0)(0.500)(−50.0)=−1000 Jq=(40.0)(0.500)(-50.0)=-1000\ \mathrm{J}q=(40.0)(0.500)(−50.0)=−1000 J. The student used the magnitude of the temperature change and therefore lost the sign. A cooling sample loses heat, so its qqq must be negative.

Keep going

Next topic6.5 Energy of phase changesPrevious topic6.3 Heat transfer and thermal equilibrium

More in Unit 6 · Thermochemistry

  1. 6.1Endothermic and exothermic processesNotes · 10 questions
  2. 6.2Energy diagramsNotes · 10 questions
  3. 6.3Heat transfer and thermal equilibriumNotes · 10 questions
  4. 6.4Heat capacity and calorimetryNotes · 10 questions
  5. 6.5Energy of phase changesNotes · 10 questions
  6. 6.6Introduction to enthalpy of reactionNotes · 10 questions
  7. 6.7Bond enthalpiesNotes · 10 questions
  8. 6.8Enthalpy of formationNotes · 10 questions
  9. 6.9Hess's lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Specific heat capacity links heat transfer to temperature change
  2. 2Mass and temperature change determine heat transfer
  3. 3A calorimeter uses temperature change to measure reaction heat
  4. 4Calorimeter assumptions determine how reaction heat is estimated
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe