Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›6 Thermochemistry
  4. ›6.3 Heat transfer and thermal equilibrium

AP Chemistry · Unit 6 · Thermochemistry

6.3 Heat transfer and thermal equilibrium

Explain heat transfer and thermal equilibrium, predict heat flow, and calculate a shared final temperature.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Temperature differences cause heat to flow between objects
  1. 1Temperature differences cause heat to flow between objects
  2. 2Heat flow stops when objects reach thermal equilibrium
  3. 3Energy conservation connects heat lost and heat gained
  4. 4Balance both heat changes to find final temperature
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Temperature differences cause heat to flow between objects

Heat transfer is energy moving between objects because their temperatures differ. Energy flows spontaneously from the hotter object to the cooler object. This continues while a temperature difference remains. An object can gain or lose energy through heat transfer. Heat itself is not a substance stored inside an object.

Thermal energy describes energy associated with the particles in a substance. Temperature indicates how hot or cold a substance is. It does not tell you its total thermal energy. For example, a large amount of warm water can contain more thermal energy than a small amount of hotter water.

Common mistake

Heat does not flow toward the object with more mass. Its direction depends on temperature.

Key terms · tap one for its definition

Heat transfer

Heat transfer is energy moving between objects because of a temperature difference.

Thermal energy

Thermal energy is energy associated with the particles of a substance.

Part 1 done

2

Part 2 of 4: Heat flow stops when objects reach thermal equilibrium

Thermal equilibrium occurs when objects in thermal contact reach the same temperature. At that point, there is no net heat transfer between them. Individual particles still exchange energy during collisions. Their exchanges no longer produce an overall flow in either direction.

Before equilibrium, compare the objects’ temperatures to predict heat flow. A metal block at 60 °C transfers energy to water at 20 °C. The block cools, and the water warms. If they are isolated from everything else, their shared temperature lies between 20 °C and 60 °C. Equal final temperatures do not mean equal amounts of energy were transferred to each particle.

Figure 1. Heat flows from the hotter block to the cooler water. At equilibrium, both have one shared temperature.

Key terms · tap one for its definition

Thermal equilibrium

Thermal equilibrium is the state in which objects in thermal contact have the same temperature and no net heat transfer.

temperatures

Temperature measures how hot or cold an object is and determines the direction of spontaneous heat flow.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the statement that defines heat transfer.
Show answer and explanation

Answer: A · Worked explanation

Heat transfer is energy moving between objects because of a temperature difference. Thermal energy, by contrast, describes energy associated with a substance's particles; it is not the heat flowing between objects. The option describing energy stored in an object's particles confuses thermal energy with heat transfer.
3

Part 3 of 4: Energy conservation connects heat lost and heat gained

In an insulated system, negligible energy enters or leaves the objects being studied. Energy conservation then means the energy lost by hotter objects equals the energy gained by cooler objects. Use a positive amount for each side of that equality. Alternatively, assign heat gained a positive sign and heat lost a negative sign. The signed heat changes then add to zero.

For a substance that stays in one phase, its heat change is q=mcΔTq=mc\Delta Tq=mcΔT. Here, mmm is mass, ccc is specific heat capacity, and ΔT=Tfinal−Tinitial\Delta T=T_{\mathrm{final}}-T_{\mathrm{initial}}ΔT=Tfinal​−Tinitial​. If mmm is in grams and ccc is in J g−1 ∘C−1\mathrm{J\,g^{-1}\,^{\circ}C^{-1}}Jg−1∘C−1, then qqq is in joules. A cooling substance has a negative ΔT\Delta TΔT and a negative qqq.

Key terms · tap one for its definition

insulated system

An insulated system exchanges negligible energy with its surroundings.

Energy conservation

Energy conservation means energy lost by one part of an isolated system is gained by another part.

Part 3 done

4

Part 4 of 4: Balance both heat changes to find final temperature

For two substances, write a heat-change expression for each one. Both expressions use the same final temperature, TfT_fTf​. In an insulated system, set their signed heat changes to sum to zero: m1c1(Tf−T1)+m2c2(Tf−T2)=0m_1c_1(T_f-T_1)+m_2c_2(T_f-T_2)=0m1​c1​(Tf​−T1​)+m2​c2​(Tf​−T2​)=0. Solve for TfT_fTf​, then check that it lies between the starting temperatures. This method assumes no phase change and negligible heat absorbed by the container.

Worked example

Mixing water at two temperatures

An insulated container holds 100 g of water at 80 °C. Add 200 g of water at 20 °C. Find the final temperature. Use c=4.18 J g−1 ∘C−1c=4.18\,\mathrm{J\,g^{-1}\,^{\circ}C^{-1}}c=4.18Jg−1∘C−1 for both portions.
  1. 1
    Set the signed heat changes to zero: (100)(4.18)(Tf−80)+(200)(4.18)(Tf−20)=0(100)(4.18)(T_f-80)+(200)(4.18)(T_f-20)=0(100)(4.18)(Tf​−80)+(200)(4.18)(Tf​−20)=0.
  2. 2
    Divide by 4.18: 100(Tf−80)+200(Tf−20)=0100(T_f-80)+200(T_f-20)=0100(Tf​−80)+200(Tf​−20)=0.
  3. 3
    Expand and solve: 300Tf−12000=0300T_f-12000=0300Tf​−12000=0, so Tf=40T_f=40Tf​=40.

Answer: The final temperature is 40 °C.

Exam tip

Do not average the starting temperatures unless the two portions have equal heat capacities, mcmcmc.

Key term

final temperature

Final temperature is the shared temperature of objects after they reach thermal equilibrium.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[2 marks]

    Define heat transfer and thermal equilibrium.

    Show mark schemeHide mark scheme

    Model answer

    Heat transfer is energy moving because of a temperature difference. Thermal equilibrium occurs when objects in thermal contact have the same temperature and no net heat transfer.

    • 1 mark for defining heat transfer as energy moving because of a temperature difference
    • 1 mark for stating that thermal equilibrium involves equal temperatures and no net heat transfer
  2. 2.Predict[2 marks]

    Predict the direction of heat flow when a 70 °C block touches 25 °C water.

    Show mark schemeHide mark scheme

    Model answer

    Net heat flows from the block to the water because the block has a higher temperature.

    • 1 mark for identifying the block as the source of net heat flow
    • 1 mark for explaining that heat flows toward the lower-temperature water
  3. 3.Explain[3 marks]

    Explain why touching objects can exchange particle energy at thermal equilibrium.

    Show mark schemeHide mark scheme

    Model answer

    Particles continue to collide and exchange energy. The objects have equal temperatures, so these exchanges cause no net heat flow in either direction.

    • 1 mark for stating that particles continue to collide or exchange energy
    • 1 mark for stating that the objects have equal temperatures
    • 1 mark for explaining that there is no net heat flow
  4. 4.Calculate[4 marks]

    Calculate the final temperature when 100 g of water at 80 °C mixes with 200 g at 20 °C in an insulated container.

    Show mark schemeHide mark scheme

    Model answer

    Both portions have the same specific heat capacity, so 100(Tf−80)+200(Tf−20)=0100(T_f-80)+200(T_f-20)=0100(Tf​−80)+200(Tf​−20)=0. Thus 300Tf=12000300T_f=12000300Tf​=12000, giving a final temperature of 40 °C.

    • 1 mark for setting the signed heat changes to sum to zero
    • 1 mark for using the masses and starting temperatures in the heat-balance equation
    • 1 mark for solving to obtain a numerical final temperature of 40
    • 1 mark for giving the answer in °C
  5. 5.Explain[3 marks]

    Explain why the starting temperatures cannot always be averaged.

    Show mark schemeHide mark scheme

    Model answer

    Each temperature change depends on its portion’s mass and specific heat capacity. The heat lost must equal the heat gained. A simple average works only when the portions have equal heat capacities, mcmcmc.

    • 1 mark for identifying mass as a factor in heat change
    • 1 mark for identifying specific heat capacity as a factor in heat change
    • 1 mark for stating that a simple average requires equal heat capacities, mcmcmc

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Which condition indicates that two objects in thermal contact have reached thermal equilibrium?
Show answer and explanation

Answer: C · Worked explanation

Thermal equilibrium means the objects have the same temperature, so there is no net heat transfer between them. Particles can still exchange energy during collisions, but those exchanges do not create an overall flow in one direction. The option claiming particle energy exchange stops is tempting, but equilibrium does not stop particle collisions.
3.

Easy·Determine[1 mark]

A 45 °C metal spoon is placed in contact with soup at 18 °C. Determine the direction of net heat flow at first.
Show answer and explanation

Answer: D · Worked explanation

The spoon is initially hotter than the soup, so energy flows spontaneously from the spoon to the cooler soup. Contact allows heat transfer, but the direction is determined by the temperature difference. The mass-based option is incorrect because heat does not flow toward or away from an object based on its mass.
4.

Easy·State[1 mark]

State what happens to net heat transfer once two objects in contact reach the same temperature.
Show answer and explanation

Answer: B · Worked explanation

When the objects have the same temperature, there is no net heat transfer between them. Individual particles still collide and exchange energy, but these exchanges balance overall. The option saying particle motion ceases mistakes thermal equilibrium for a state in which particles stop moving.
5.

Medium·Calculate[2 marks]

An insulated cup contains 150 g of water at 70 °C. It is mixed with 150 g of water at 30 °C. Assuming no heat is absorbed by the cup, calculate the final temperature.
Show answer and explanation

Answer: A · Worked explanation

The two portions have equal masses and the same specific heat capacity, so their heat capacities are equal. Energy lost by the warmer water equals energy gained by the cooler water, giving a final temperature halfway between 70 °C and 30 °C: (70+30)/2=50(70+30)/2=50(70+30)/2=50 °C. The tempting 40 °C result is not the midpoint and would not balance the heat changes.
6.

Medium·Calculate[2 marks]

An insulated system contains 100 g of water at 60 °C and 200 g of water at 30 °C. Both portions have the same specific heat capacity. Calculate their final temperature.
Show answer and explanation

Answer: A · Worked explanation

Since both portions are water, their specific heat capacities cancel in the energy balance. Set 100(Tf−60)+200(Tf−30)=0100(T_f-60)+200(T_f-30)=0100(Tf​−60)+200(Tf​−30)=0; expanding gives 300Tf−12000=0300T_f-12000=0300Tf​−12000=0, so Tf=40T_f=40Tf​=40 °C. The simple average of 45 °C is tempting, but it incorrectly gives equal influence to portions with unequal masses.
7.

Medium·Determine[2 marks]

A 50 g metal sample with specific heat capacity 0.40 J g−1 ∘C−10.40\,\mathrm{J\,g^{-1}\,^{\circ}C^{-1}}0.40Jg−1∘C−1 cools from 90 °C to 30 °C in an insulated setup. Determine the heat gained by the other object in the setup.
Show answer and explanation

Answer: C · Worked explanation

For the metal, q=mcΔT=(50)(0.40)(30−90)=−1200q=mc\Delta T=(50)(0.40)(30-90)=-1200q=mcΔT=(50)(0.40)(30−90)=−1200 J, so it loses 1200 J. In the insulated setup, the other object gains the same amount of energy, or 1200 J. The negative value describes the metal's heat change, not the positive heat gained by the other object.
8.

Medium·Calculate[2 marks]

An insulated container holds 100 g of water at 20 °C and 50 g of water at 80 °C. What is the final temperature? Assume the specific heat capacity is the same for both portions.
Show answer and explanation

Answer: C · Worked explanation

Balance the heat changes: 100(Tf−20)+50(Tf−80)=0100(T_f-20)+50(T_f-80)=0100(Tf​−20)+50(Tf​−80)=0, after canceling the shared specific heat capacity. This gives 150Tf−6000=0150T_f-6000=0150Tf​−6000=0, so Tf=40T_f=40Tf​=40 °C. A simple average of 50 °C is tempting, but the cooler portion has twice the mass and therefore has greater influence on the final temperature.
9.

Medium·Calculate[2 marks]

A 20 g metal object with specific heat capacity 0.50 J g−1 ∘C−10.50\,\mathrm{J\,g^{-1}\,^{\circ}C^{-1}}0.50Jg−1∘C−1 warms from 25 °C to 55 °C after being placed in contact with a hotter object in an insulated system. Calculate the heat lost by the hotter object.
Show answer and explanation

Answer: B · Worked explanation

The metal gains q=mcΔT=(20)(0.50)(55−25)=300q=mc\Delta T=(20)(0.50)(55-25)=300q=mcΔT=(20)(0.50)(55−25)=300 J. In an insulated system, the hotter object loses the same amount of energy, so its heat loss is 300 J. The value -300 J is the signed heat change of the hotter object, whereas the question asks for the amount of heat lost.
10.

Hard·Determine[2 marks]

An insulated container holds 100 g of water at 20 °C and 50 g of a second substance at 80 °C. The second substance has a specific heat capacity twice that of water. Determine the final temperature, assuming neither substance changes phase.
Show answer and explanation

Answer: D · Worked explanation

Let the specific heat capacity of water be ccc; the second substance has capacity 2c2c2c. The balance is 100c(Tf−20)+50(2c)(Tf−80)=0100c(T_f-20)+50(2c)(T_f-80)=0100c(Tf​−20)+50(2c)(Tf​−80)=0, which simplifies to 200Tf−10000=0200T_f-10000=0200Tf​−10000=0, giving Tf=50T_f=50Tf​=50 °C. The mass-weighted value of 40 °C overlooks the second substance's greater specific heat capacity.

Keep going

Next topic6.4 Heat capacity and calorimetryPrevious topic6.2 Energy diagrams

More in Unit 6 · Thermochemistry

  1. 6.1Endothermic and exothermic processesNotes · 10 questions
  2. 6.2Energy diagramsNotes · 10 questions
  3. 6.3Heat transfer and thermal equilibriumNotes · 10 questions
  4. 6.4Heat capacity and calorimetryNotes · 10 questions
  5. 6.5Energy of phase changesNotes · 10 questions
  6. 6.6Introduction to enthalpy of reactionNotes · 10 questions
  7. 6.7Bond enthalpiesNotes · 10 questions
  8. 6.8Enthalpy of formationNotes · 10 questions
  9. 6.9Hess's lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Temperature differences cause heat to flow between objects
  2. 2Heat flow stops when objects reach thermal equilibrium
  3. 3Energy conservation connects heat lost and heat gained
  4. 4Balance both heat changes to find final temperature
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe